Wall spool holder with 608zz Bearing for ikea platsa
i mixed two models to 1 model
Wydruk około 4,39 €–5,36 € nettoWstępna wycena jednego wariantu
- Pobrania
- 25
- Polubienia
- 4
- Ocena
- 0
136 modeli
i mixed two models to 1 model
Wydruk około 4,39 €–5,36 € nettoWstępna wycena jednego wariantu
Trying my hand at making a robot dog and needed a thin bearing for my cycloidal drive, but didn't want to break the bank in just bearings alone. Hence I decided to design one I could use with just some standard 4.5mm steel BBs. Print…
Another 608zz bearing that works for my personal use when i am out of metal ones PLA stl have bigger tolerance and i print it in PLA ABS stl have lower tolerance and is printed in ABS Printed on Bambu P1S 0.2mm layer, 3 walls, 15% infill
Based on the Gridfinity organization system by Zach Freedman
My original design has 12 individual spaces for bearings. This new version has three wide channels that can hold up to 5 bearings for a total of 15. Includes 1x2x3 version and a stackable 1x2x6 version.
The STL files were fixed again by @tbkMAKER and now everything works! Why is it better than the others? My spinning filament swatch box stands out due to its excellent storage design, which allows for smooth rotation. Additionally, the…
Designed for my Prusa Mini to sit next to the printer on the desktop. It uses 16 x 608ZZ bearings, of course, you don't need to fill all the spots. The bearing slides from underneath and snap in place. Print Settings: Resolution: 0.2mm…
Just a small upgrade to make the Z-Axis more stiff by adding some bearings on the top part. Before and after Version History V1.2TH Same as V1.2 but added through hole on top, so it will be easier to get the bearings out again. V1.2 Added…
608Zベアリングを使った回転する台です。 It is a rotating table using 608Z bearings.
I've been searching for a stand like this for a long time, so i decided to make my own with the features i wanted. Designed for 1/10 scale (i think it also works for 1/12) trucks and cars, i won't make it in a different scale, at least,…
A spool holder for filament-spools on a flat surface. It is designed to only use one file. BOM (for two holders / one spool): 4x 608ZZ bearing 4x M3 screw 12mm 4x M3 nut
I designed these to hold my filament inside the IKEA lack box above my printer. This system can hold up to 20 1kg filament rolls Category: 3D Printer Accessories
This is based on Adafruits model. I adapted this to use the 608zz bearing, and printed a base
This 3D-printed pocket hole jig features a slot designed for a 608ZZ bearing, offering guidance while drilling pocket holes. 15 degree angle 608ZZ bearing Flat spot for clamp Print settings: Infill 25% Walls: At least 3, more walls will…
Really simply design. Its a remix from Platsa Spool Holder WITH 608zz Bearing !!! Its a remix from my 69mm wide version https://www.printables.com/model/2218 VIDEO: https://www.youtube.com/shorts/e5d2CM1RgiE
I needed some pulleys to make use of my ridiculous high ceiling in my apartment. I had 608z bearings around and sketched up this design. This is not meant for heavy applications! Use with care! I have tested these pulleys with 3kg of…
I liked both designs of this holder, yet I needed it to hold on the wall by itself, like the original non-motorized one. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Infill: 15% Filament: doesn't matter…
This is a print-in-place plastic bearing with the same dimension as the popular 608zz skateboard bearing, which is commonly used for spool holder. Note: the gap between the inner and outer ring is 0.35 mm; which should be sufficiently…
A standard 608ZZ bearing with an outer diameter of 22mm , a shaft diameter of 8mm , and a height of 7mm , with modeled end covers and internal balls. Nothing special, just a good way to store a functional model for future projects.…
My point of view on the model “ Anycubic Kobra Z Axis Stabilizer ” by Wavz3D A little bit more reinforced (to avoid crashes in the screw hole) Axis Stabilizer that supports 8x22x7 bearing with opportunity to make your own name tag I…
PTFE filament tube guide for adventurer 5m. For assembly you need M3 screws and a 608z bearing. I also attached .STEP files if you need to make a version for the bearing you have.
This will fit a 608zz bearing
A simple bearing dummy for help on your creation needs. Category: 3D Printer Accessories
Remixed from Sun Spinner (No Bearings) . Scaled to 110% from original, thickened to 7mm, parts widened for best printings and then modified to accept the 608ZZ Bearing. Requires. 1 x 608ZZ Bearing. Print with your favourite thermoplastic…
Instead of using a 3D-printed arm for the spool, I decided to create a holder with a 6 inch bolt. I designed this hanging spool mount to go under my workbench with my printers. I had lots of bearing leftover from the fidget spinner craze…
Print with small size on build plate with supports. Please be aware, this mod makes no sense for standard sovol sv06 configuration. only ise this if you use oldhamm style floating lead screws.
I was inspired in Artur Sass Braga's “ Central filament spool axis… ” design in which I found that its nut is very small for spools that have inner diameters larger than 63mm, so I redesigned it from scratch and created two versions of…
Found this Spool Roller for smaller bearings, https://www.thingiverse.com/thing:952323 was going to edit the original but it was easier to completely redraw from the ground up, I also added cutouts to include spacer from here,…
For each spool you will need to print the side 4x and a single junction piece.
Made a bearing model for my robot quadruped project and these files should hopefully fill in the gap for those who need bearings but can't purhcase the BB's required for my other bearing model…
Voron Spool holder for 2020 extrusions The reason for this model was to have a lightweight spool holder that only needed a single M3 T-nut. Holds a single 1kg spool 30g of filament for all parts. Sizes of acrylic panel spacings include:…
I haven't an ender 3 and her POM wheels, but some 608zz bearing (use for skateboard). I also modify the offset for keep the originals dual gear with M5 nut. For information, I reduced the width of the spooler back by 2 mm, for save a…
As I found the spool holder on the FLSun T1 and T1 Pro a little too simplistic, and had some 608ZZ bearings on hand, I designed a spool holder using the original rod to secure the spool and prevent it from falling onto the effector during…
To assembly it correctly, use some hammer, or just use hot air to get your bearing warmer.
A caster wheel made from a 608ZZ bearing. I use these as a make shift pull out drawer on my printing bench. Print both stl's, insert bearing onto “Side1” and then snap fit into “Side2”. Print in PETG or ABS at 0.20, high infill for…
As shallower spools tend to slip of the bearings, I decided to redraw chanders Spool Holder and add a third bearing. So even smaller spools stay in place. The pin holds the bearings in place. I used these bearings, they work well…
Need a placeholder for 608zz and 624zz bearings until a slow boat from china delivered the right things. these are none working placeholders and not actual bushings. Category: Hobby
Remixed in Tinkercad to use 608ZZ bearings. Bearings and joining of the two halves are a tight fit. I used 3 on a threaded rod in an Ikea Samla box. Many thanks to the original designer!
A simple and functional mount designed for the popular 608Z bearing (8x22x7 mm). This is an ideal base for creating rollers, guides, or other rotating mechanisms in your DIY projects. The mount features two mounting holes designed for M3…
This is a remix of an exist model that adapts the 608zz bearing.
Bonjour, Ne trouvant pas de modèle de spool holder parfaite pour ma Sidewinder X2. J'ai modélisé avec blender un modèle 100% adapté à ma machine. Il fera peut être aussi votre bonheur. Je n'avais pas de roulement sur ma X2, j'ai du…
*** My new design, compatible with more spools:: https://www.thingiverse.com/thing:5386608 This is a bearing filament spool holder designed for Voron v0.1 to replace the PTFE tube holder. (Can be used with any frame built by 1515 aluminum…
I wanted to add a Z axe stabilizer but i only had 608 bearings so I just made a bigger hole for it :)
The size of tube inner walls in the sourced model was not optimal and 2 inner walls can't be printed without constant interruptions which leads to very long printing time. I optimized it by changing the inner wall width. Also I manually…
Single spool holder using ball bearings
A spool adapter made for larger heavy filament spools such as Filamentive's 8.5mm reels. Will fit other brands with internal holes that are 36mm. I use a 165mm wide spool but will fit wider spools up to ~200mm. This spins perfectly smooth…
Drop-in replacement for 608zz bearings in top lead screw mounts. These do not restrict the movement like a bearing but do prevent the lead screw from rattling around. 22mm OD, for 8mm lead screws. Category: 3D Printer Parts
Decided i did not want to pay $10 for rollers everytime they get worn out so i made my own! Press fit 2x 608zz bearings Supports required for the bottom bearing overhang; no support required for upper body.
Supplies: 8x tower 4x groove ring 4x 608zz bearing wooden plank 100x200mm 8x little screws 2.5x19mm How to make: Print 8 of the filament towers. I used PLA with 40% infill. It will be around 4 grams each, with a print time of 40 minutes.…
Migrating old models from youmagine. freecad > slic3r > prusa i3 mk2
basta un paio di cuscinetti 60zz per bloccare la viblazione della tr8 e tenerla prfettamente in asse, la barra liscia finalmente è bloccata nella parte sopra e non si sfila. www.facebook.com/groups/officina3ditalia SI STAMPA SENZA…
My customized Fidget Spinner
Should fit most phones. I needed a gimbal fits 608zz bearings by design Prints opposite direction of use. unless you print it on a SLA printer Hooks are for springs or a strong rubber band
Ender 3 v3 se
608ZZ bearing object with exact dimensions for prototyping and mockups Category: 3D Printer Parts
Roulette diamètre 40mm sur roulement 608Z. Le roulement est prisonnier de la roue, prévoir une pause pendant l'impression. Caster diameter 40mm on 608Z bearing. The bearing is trapped in the wheel, take a break during printing. layer…
I designed a lid for my filament swatch box to make it easier to transport. This way, you don't have to worry about anything falling out when it's tilted, and it also keeps the contents protected from dust.
Lager 608zz/609zz für einfache Anwendungen + Behälter Es handelt sich um Lager ohne Gleitelemente. Die innere und äußere Schale bildet das Lager. Geeignet für simple Anwendungen wie sie zum Beispiel bei Filament-Rollen-Halter vorkommen.…
Stops the metal spindle from falling out! A 50mm standard Arbor that fits the Prusement spools I remixed for the Lack Enclosure V2 Spool holder. The arbors have a space for standard 608Z bearings which currently come with the MMU2S. They…
just a hack for the 608 bearings an M4 screws :-D Category: 3D Printer Accessories
This is a design to give rotating movement to a linear slide bushing. Parts required to build: 4x - M4 x 16mm allen bolts (to mount the printed part on the slide bushing) 1x - M4 x 25mm or 30mm bolt (for inner mounting of the ball…
This is a reupload of the spool holder I've been using for years (and I needed another one today). Originally from thingiverse. It is generated from the included OpenSCAD file (also originally from thingiverse). The original idea came…
Quick and easy printable guide for 608ZZ ball bearings for filament spools and filament boxes. The bearing guide is so tightly designed that it does not need to be glued to the ball bearing and can therefore be separated again without…
A holder for 100mm wide spools with offcentered bearings to eliminate spool wobbling druring print.
PolyDryer Filament Dry Box Center Bearing Shaft-Uses 608zz Bearings I designed this bearing assembly to be able to feed flexible filaments and nylon's from the PolyDryer PolyBox, with significantly less rolling resistance than the stock…
Hallo, eine Laufrolle für ein 608zz Kugellager mit den Maßen : 8´22´7 mm. Höhe misst 9,4mm da ein kleiner Sicherheitsring mit integriert ist, damit die Rolle nicht abrutschen kann und das Kugellager mittig sitzt. Viel Vergnügen ;) Hello,…
53mm spool adapter with 608z bearing hole Category: 3D Printer Accessories
Geeetech spool adapter 75mm to 608ZZ bearing. Adapter has a diameter of 76mm for a tight fit. Print it with PETG so it is flexibel enough.
Adapter um eine 2,5 kg Spule mithilfe von 608zz Kugellagern, und einer 8mm Welle laufen zu lassen. Die kugellager halter.stl kann im Slicer geteilt werden. So ist sie besser zu drucken, und später einfach zusammenkleben. Siehe Bild 2
For the GratKit filament dryer, I upgraded the included roller by adding 608zz bearings. This modification significantly improves the roller's smoothness and reduces friction during operation, ensuring a more consistent filament feed. The…
Qidi Q1 Pro Side Spool Holder with 608ZZ bearing upgrade
porta bobina super scorrevole con cuscinetti 608zz. All'interno avvitare una barra filettata M8 da 85mm, incollare la parte posteriore con cianoacrilato inserendola nell'apposito foro, ho fatto una chiave per posizionarla senza errori. O…
608ZZ Bearing bolt, bushing and casing assembly with template for integration into other stl's. Take the template, use Boolean to merge the template into the other part of the model you are working with and then print 2 casings, 1 bushing…
Just thinking to be able to use it as a lazy susan for cake decoration or for spraypainting stuff, as i have a ton of 608 bearings, will use those.
Nut 65 mm , axis 90×35mm ( 75×35mm)
With outer ring to ensure adapter align with spool, bearing hole also has stopper.
I added a 608zz bearing and a octagonal hole to the top mount - I tried to refer to the look of MK4 elements WARNING !! It should be remembered that adding a bearing to the top mount can cause more vibrations on the printer frame, so I…
Screw is 3mm. The length depends on what you are attaching it to.
When you need transform a 608zz bearing into a tire or simply add to it some rubber for 3d carriage application or make the bearing can roll over an alluminium profile, you can use this thing. It's a rubber with the dimmensions of the 608…
proko氏が作成したスプールホルダーで608ZZベアリングを使用できるようにリミックスしました。 ローラー以外はオリジナルのモデルを使用します。 【Translate by DeepL】 I remixed the spool holder created by proko to be able to use 608ZZ bearings. The original model will be used except for the rollers.
I bought the wrong bearings, so I changed another remix to fit my bearings.
Cono Porta bobinas filamento rodamiento 608ZZ
This case fits 10 608ZZ bearings. 3mf file already includes modifiers for speed and quality. Layer height on tube is 0,24 mm, on thread it's reduced to 0,12 mm. After print, try screwing the lid on few times and clean the case before…
I could not find anything on Thingiverse that fit my RobotDigg PLA spools so I made this 4 mm thick spool holder, quick print. With a small mod you could adapt it to fit any 200 mm diameter spools. Fits 21.93 mm diameter skate bearings,…
It will fit tight! 8mm hole. light duty only.
OpenSCAD screwtop container customerizer generated storage container for 608zz/ Z809 bearings in various sizes. Printing material: PLA bottom / top layer: concentric infill: 15% OpenSCAD screwtop container customerizer settings The…
These are plastic parts to hold up the T8 trapezoidal screws centered thanks to a 608ZZ ball bearing. These parts are suitable for version 2.01 of the p3steel frame and others if identical. Make sure of the shape of the metal parts.…
This is designed to be the same size as a 608zz bearing, so it you wanted to print something that used 608zz bearings as weights, but didn't want to spend as much money on weights, just print these and put U.S pennies in them. Not sure if…
This model gives the spool holder a solid body for extra strength and reduces friction on the spool itself to lessen cardboard dust on the buildplate. Usable for spools 70mm wide of less
I realised my Peli/Pelicam Storm iM2975 case was hard to pull, and on getting home I spun a wheel - ooops, yes it's trashed! I removed the wheel and saw that the bearing is non-standard, they have little stub-axle type things, one has a…
609zz Z-Axis Support Bearing for The 100 Extended
I took the concept of the remixed models, but took the official top Z stl for the SV06 plus and modified it to be sturdier to print and accept a 608ZZ bearing. Designed to be printed without needing supports.
Roller for spools with small internal diameter (50mm). To be used with 608z bearings I made this for grilon and 3n3 spools, but should work with similar spool types
I created a more stylish model for storing bearings. If you have any suggestions, please leave a comment.
EN Stand for large 5 kg filament spools. The print does not require supports. Final assembly is done by gluing the parts together with cyanoacrylate (Super Glue). Press 608ZZ bearings into the rollers. then insert the spacer sleeve from…
My friend Jocelyn ( from JSTech YouTube Channel - Printables account @JSTECH_316569 ) having decided to update the great little machine offered by BIQU, I was discussing with him a few possible improvements when I realized that I'd never…
Remixed to fit a Cosori tray so that I can print while drying filament. Print with at least PETG for temperature resistance. 4 608zz bearings 2 M3 6-8mm bolts 3 M8 40mm bolts Dryer Walls can be found here .
Got an 8mm rod, axle, or lead screw that needs rock-solid support? This compact 608ZZ bearing mount is designed for a perfect press-fit, offering zero-wobble rotation for your DIY CNC, filament rollers, or custom mechanics. Shaft…
no support just add 4x 608zz bearings any spool size Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 20% Category: 3D Printer Accessories