Jabra Speaker 60deg Stand
A handy stand to set your Jabra speaker at 60deg on your desk. Improves sound directionality.
- Pobrania
- 384
- Polubienia
- 47
- Ocena
- 4,57
27 modeli
A handy stand to set your Jabra speaker at 60deg on your desk. Improves sound directionality.
Details This print consists of 3 parts: A left bracket to mount the Pioneer SPH-DA360DAB to the Toyota GT86 Subaru BRZ A right bracket to mount the Pioneer SPH-DA360DAB to the Toyota GT86 Subaru BRZ A Fascia to fill left, right, bottom…
This wheel accepts Tamiya Mini Cooper M-Chassis 60D tires and allows you to run them on the MJX Hyper Go 14301. This gives a few more tire options for the car as well as some extra clearance if you want to add adjustable upper control…
This fully 3D printable laptop stand is ideal for 13-14 inch laptops. Has max angle of tilt of 60 degrees. Need to use 2x Paper pins (<1mm diameter) to fasten the hinges. I have included the STEP files so customization is feasible for…
IMPORTANT: You need to add this to Line 20 of the G-code: M302 S85 This allows the Printer to do the Cold Pull. Be aware, that this is normally deactivated due to Security, since a Cold pull is pretty hard on the Printer, and should only…
Tascam DR60d mkii Spare part - Clip 23.01.2020 Not finished I got so issues with the size off the holes. But i drilled a hole with 3mm it works, but not perfect. i will update it soon. My Grip Clip broke off and the cosntruction fall…
Odpadní přihrádka pro overlock Brother 760D. Container for Brother Overlock 760D.
Desk remote control holder for Edifier S360DB speakers. I found the remote control to be instable when you want to push button with single finger when the remote is sitting on the desk. So I made this simple holder which adds stability.…
I wanted to use a Canon T6s (760D) along with some software (Set'n'C or Eclipse Orchestrator) to photograph the April 8th, 2024 total solar eclipse. Doing so requires the use of a Micro USB cable, which I didn't trust to stay connected…
Designed specifically in cases where your cable connections to your MK52 heated bed is tall - in my case due to a combination of using a slightly thicker cable and using ring terminals with a really thick insulation layer. This cover is…
This bracket brings two 2020 extrusions together at 60 degrees and has a clamp for a 16mm wire shelf post. I designed this for building some triangular printer stands, but I figured I'd share them on their own in case anyone might have a…
EZVIZ bullet camera and solar panel mount at 60 degrees angle. (If need to have it to the other side: mirror the model in slicer). Model was designed to be mounted to baseboard/fence with 8pcs of 4x20 wood screws. Camera base mounted with…
Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV Other Drone Accessories here: https://www.printables.com/@StudioMechanik/collections/3053772
Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV Other Drone Accessories here: https://www.printables.com/@StudioMechanik/collections/3053772
As I required smooth filament guide to cooperate with my filament drier I decided to remix a few of my favourite designs. I've created posts for https://www.printables.com/model/624787-filament-guide to be used as side or main filament…
nonfoldable testversion for my fg-24 Category: Props
With MK3S+ with 0.6mm nozzle orginal & this remix model prints OK without added support, but it won't do any harm to add those either. Lid addon part, which can used to add additional color & close top part holes, can be pressed to lid…
Side brush storage for Lubluelu SG60 SL60D Needed something to store the side brushes without bending them. Storage can contain 3 pairs of side brushes. Version on picture shows V0, V1 is only 80 mm tall not 90 mm. Printed with ABS 0.28…
Use to mount LEDs or other accessories
This is the output tray replacement part. I could NOT find a replacement when this gets broken off a lot due to the placement of the location of this output tray. Brother does not have a replacement sold that is easy to find for this…
as of the insekt net wide i needed a DN16 60degree but nowhere to buy and the 45deg is so tiny and breks so i decided to go for a 3mm wall print so it is DN16W60 3mm prints in 20 min fits perfect holds like hell and it is what i needed…
Battery cover for the LCR Meter MIC-4060D.
This is to mount an Athom HL-L2460DW presence detector to 3/4" conduit. I use it in a couple rooms that are unfinished in my basement where outlets are mounted on concrete walls. It slips right on the conduit and the pegs on the mount fit…
Currently testing v.0.9. Looks like the stand itself has been removed from evasolo.com. https://www.evasolo.com/en/furniture/accessories/tv-stands/carry-tv-stand-on-castors-stainless-steel
While setting up my enclosure, I wanted an easy way to use the same spool holder upside-down, as well as upright. I found the Filler Filament Holder and designed a rotating adapter, all while being able to keep using the Filler prints…
Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV Other Drone Accessories here: https://www.printables.com/@StudioMechanik/collections/3053772
Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV Other Drone Accessories here: https://www.printables.com/@StudioMechanik/collections/3053772