2020 Extrusion to 16mm post - 60deg Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This bracket brings two 2020 extrusions together at 60 degrees and has a clamp for a 16mm wire shelf post.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 177
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- GNU General Public License v3.0
This bracket brings two 2020 extrusions together at 60 degrees and has a clamp for a 16mm wire shelf post. I designed this for building some triangular printer stands, but I figured I'd share them on their own in case anyone might have a need for em! If you'd like to find more about the printer stand, you can find more about it here
The brackets and caps should print without supports (although depending on your machine's bridging, the caps may benefit from something. The clamp has ridges on top and bottom to engage with the spacing on the wire shelving posts to 'lock' into position. I printed mine at 0.48mm layers out of PETG and have been really happy with them thus far.
Category: DIY