Bosch Powertube 625Wh Wallmount
A wallmount for the Bosch powertube (625 Wh, 500Wh). hole in the bottom for the Charger Cable. you can see the powerlevel LEDs and push the indicator button.
- Pobrania
- 513
- Polubienia
- 29
- Ocena
- 5
Liczymy pasujące modele…
A wallmount for the Bosch powertube (625 Wh, 500Wh). hole in the bottom for the Charger Cable. you can see the powerlevel LEDs and push the indicator button.
my son lost this part while building some cool original lego technic monstertruck (thanks to the LEGO company), and i was irritated not to find it somewhere here. luckily 2 were used in the model, so i started to reengineer it . the angel…
PETG or harder recommended. No supports needed if you print thread side up, but I used a brim for stability. This thread works with many (most?) household vacuum hoses. I harvested an old Eureka hose (the black one pictured), an ancient…
A little support is necessary, even if the pot and feet are printed separately. However, both parts must be glued together. A model has also been added where everything is in one piece, support is required here, too.
6200 Ball Bearing Very easy to print model with just supports for the balls but barely require's 1g of them. Grid supports works the best Sizeable but this is minium size for best use.
Typ 2 Stecker Abdeckung Type2 charging cable cover
Current conducting coupler for modeltrain are expensive. So both hobbyists and commercial vendors came up with the idea of a magnetic, current conducting coupler. This is my take on the that concept. What you need per car, so for two…
Mopar 55155622AB, Jeep XJ/ZJ/WJ 1997-2004 "Jeep" Emblem for hood and trunk lid Original designer: DaimlerChrysler AG, Stuttgart / DaimlerChrysler Corporation, Auburn Hills, MI. I disallow commercial use of this model. I'm not sure about…
My friend collects old Tonka Toy Vehicles. In 1965, Tonka make a police jeep #325 with a black & white striped hardtop roof. In 1962, they made a #350 Pink& White Surrey Jeep. There is also a green roof from the Vintage 1965 Tonka Jeep…
Mopar 55155620AB, Jeep WJ Grand Cherokee 1999-2004 Trunk lid "V8" Emblem for 4.7l models Original designer: DaimlerChrysler AG, Stuttgart / DaimlerChrysler Corporation, Auburn Hills, MI. I disallow commercial use of this model. This item…
PMAG 10 7.62 AC - AICS Short Action single shot sled. Best way to install the sled into a magazine is to remove follower/spring/base plate, insert sled first then rest of the magazine parts.
Most of what you need to know about this game is found at boardgamegeek link below https://boardgamegeek.com/boardgame/949/twixt Rules are also found in one of the pictures above. The original game was designed to be split into 4 8"square…
Replacement of the plastic insert into rail holding the basket. That prevents the basket-holding rail from leaving the guiding wheels. It gets easily broken over time and is almost impossible to get hold of replacement. Recommend printing…
Ein Fensterschnäpper war defekt, und die Nachbestellung wäre zu teuer gekommen. So habe ich einen einfachen Ersatz in FreeCAD konstruiert und auf meinem Prusa Mini+ ausgedruckt. Das Teil funktioniert gut.
Mopar 55196762AA, Jeep Grand Cherokee WJ 1999-2004 fuse puller tool. Modelled according to OEM. Stores inside and underhood fuse box lid storage. Tested working even when printed with 0.6 nozzle. If the fuse has stayed in place for 2+…
The injection molded plastic housing that comes with the Paradise GL22627BK Landscape Pathway Light typically cracks/falls apart after 1-2 years. I modeled a replacement with the main difference from the original is I used external fuzzy…
It has mount, maybe stick it with glue (depends on you). Need supports.
Tool holder for Wera Kraftform Kompakt 62 with 33 pieces. https://products.wera.de/en/kraftform_kompakt_kraftform_kompakt_without_ratchet_functionality_kraftform_kompakt_60_62_kk_62.html.html (No. 05059297001) This version is for…
An example 3D printing can be useful also for mechanical parts manufacturing. Maybe someone find this model useful. My original coupler of Grain mill Bosch MUZ5GM1 has broken. It is made of some plastic material. So I decided to design a…
6200 Ball Bearing with HEART! Very easy to print model with just supports for the balls but barely require's 1g of them. Grid supports works the best Sizeable but this is minium size for best use.
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
A replacement spring for SONY 62mm lens cover. Just snip off the remnants of the broken spring and place the new one in. No glue needed. Attached is gcode for Ender 3 print in PLA, takes about 9 minutes to print. Works plenty good. Drawn…
About Mount for a 1/4" pegboard system to accomodate the Craftsman cmht77621 stud finder Required Hardware: QTY 2 pegboard mounting screws for a 1/4" pegboard (size small)
Clip to mount a 62mm sony lens cover a shoulder strap. Modeled with SolidWorks for makers. Best Regards, syclone
This is a Heat Insert Mod of the great DIN Rail Bracket from Fabian. M3 Heat Inserts up to 5.7mm can be used. If you want to create your own mounts for it - hole distance is 52.5mm. I will also publish several mounts I created.…
Try the new, EXTRA printable version of this model! - https://www.printables.com/model/1289272-extra-printable-print-in-place-6200-ball-bearing - Improved in just about every way and highly recommended over this one! I found myself in…
The labels are for these gridfinity boxes: https://www.printables.com/model/592545-gridfinity-bin-with-printable-label-by-pred-parame The bolts are to scale as far as possible. When the screws get too long for the label, the bolt figure…
Collection of screws (ISO 4762 / DIN 912) including : M3x 6, 8, 10, 12, 16, 20, 25, 30 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would recommend…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…
This model is compatible with the lego system.
can be printed together the model needs to be glued together or separately in other colours can be printed without support the Messerschmitt is very realistic Print in place kit card , Assembly required need to use a support
UPDATED: Slightly larger tolerance (0.1mm diameter for the bearing balls). Choose random seams if you printer is not well-calibrated. I recently needed a slimmer ball bearing for a spinner project, so I did my own take on ball bearings to…
IBC tank reducer from 64mm to 1" inch + new 5/4" inch version available redukce na IBC nádrž z 64mm na 1" coul + novinka na výběr i verze 5/4" coul 5/4" version not tested, please give feedback verze 5/4" není otestovaná, prosím o zpětnou…
This model is compatible with the lego system.
This model is compatible with the lego system.
German Dies ist eine Ladestation und Wandhalterung für Bosch PowerTube (+ Smart) 500, 625 und 750er E-Bike Akkus in horizontaler und vertikaler Ausführung, sowie mit hinterem und vorderem Kabelauslass (die Version mit vorderem Auslass ist…
More of my favorite Disney Character in several of the classic “Stitch” poses. Currently I am uploading the color swap version that can easily be printed on most single extruder printers (no AMS/MMU). I will get a “paintable” version…
Collection of screws (ISO 4762 / DIN 912) including : M2.5x 3, 4, 6, 8, 12, 16, 20, 25, 30, 35 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. This part is quite tiny, consider…
This reduction gearbox is a great way to demonstrate to students how gear ratios compound (it's also just fun to have as a desk toy). Each compound gear has a 32-tooth and 8-tooth gear stacked resulting in a 4:1 gear ratio. With 9 gears…
62mm propellers with a hole for a Lego axle. Print with supports, dry your filament and ensure good cooling. The blobs on the surface are because of wet filament.
After finalizing the DB KÖF-II locomotive succesfully (https://www.printables.com/model/181942-db-kof-ii-gauge-1-132-45-mm), I challenged myself to design the Dutch alternative to this German shunter. This is the series 200-300 of the…
This case is designed to house the Seeed Studio XIAO ESP32S3 & Wio-SX1262 along with a LiPo 1100mAh battery (size 703048) Update 07.08.25 Added a power switch, removed the button (since it's no longer needed with the switch), and added…
I got a request for a Kalashnikov ammo box. The spacing is 50pcs/11,80x57,215mm between the insert top and bottom. You gonna need 8pcs/M3x20mm for the Latch and Hinge. Hope you like it.
The Messerschmitt Me-262 Schwalbe (Swallow) was the world's first operational jet fighter. Entering service in 1944, it quickly proved itself as a terrifying opponent to meet, with its high speeds and vast array of armaments. Multiple…
Tube Case for the Seeed Studio XIAO nRF52840 & Wio-SX1262 Kit for Meshtastic https://www.seeedstudio.com/XIAO-nRF52840-Wio-SX1262-Kit-for-Meshtastic-p-6400.html Print Settings: PETG 0.2mm layer 4 walls 15% infill add support on everything…
.308 Winchester, also known as 308 Win., almost identical to 7.62x51mm NATO, is a centerfire rifle cartridge. .308 Winchester was designed in the United States of America by Winchester (using Frankford Arsenal's designs) in 1952. The…
Standard Drill bit set wall mount .0625 to .5 inches
This model is compatible with the lego system.
Late-WW2 Era German Fighter Jet Messerschmitt Me-262
If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. If you want to support my work bye me a coffee. Thanks! Check out my other models. Description: I like the idea of Jerryie's…
Thanks to rosch8 for the really great original wind turbine. After the original wind turbine had been running without any problems for some time, I wanted to make it bigger. Increased the hub, rotor blade and spinner to 150% and changed…
FDM -> It is recommended to use a layer height below 0.15 for printing. It is recommended to use LCD or SLA for printing to obtain higher precision. "A series of high-precision bullet models." In order to meet the needs of military…
This model is compatible with the lego system.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I enjoyed printing @Meister Edel's Pull Copter and wanted to design more…
If you feel like it, here is a donation site for our team and would be very grateful if you helped out (we really need money rn): Click here to donate PRINT DRONE LAUNCHER V3 for my latest design FOR DRONE LAUNCHER V3: It uses a half…
Print the toyota logo a little smaller (I have it set up on the 3mf file it should be 49.94mm on X) Sand them smooth or add resin and paint in silver and black or whatever you like Glue them together Clip it in and enjoy! I will upload…
Cute stitch stanley cup accessory
Giant Brick Pirate Flintlock Pistol (x10) Print two part and two join
Disclaimer: this one is stupidly hard to print, don't expect it to work. But when it does it spins surprisingly well Settings: bambu x1c 0.08mm layer height outer wall speed: 40mm/s inner wall speed: 100ms/s The common problem is rollers…
Remix from zx82net Great Rugged Box. The latch and hinge are not change so you can use all of his different models. Ammo box for 50pcs x 9,3x62 Printed with Extrudr MF Military Green PETG and Prusament Jet Black PETG 0,30mm 4 Layers. Hope…
Collection of screws (ISO 4762 / DIN 912) including : M4x 6, 8, 10, 12, 16, 20, 25, 30 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would recommend…
Print with 0.15mm layers from any material. 100% infill recommended though it probably prints it filled in anyways due to the parts size.
This model is compatible with the lego system.
Collection of screws (ISO 4762 / DIN 912) including : M5x 6, 8, 10, 12, 16, 20, 25, 30, 35 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would recommend…
This device is based on XIAO ESP32S3 and Wio-SX1262 LoRa module, making it the smallest Meshtastic Device, LoRa Sensor Node or a One Channel LoRaWAN Gateway. Coupled with an exquisite 3D - printed casing, it is equipped with an 868 -…
FDM -> It is recommended to use a layer height below 0.15 for printing. It is recommended to use LCD or SLA for printing to obtain higher precision. "A series of high-precision bullet models." In order to meet the needs of military…
This model is compatible with the lego system.
Please click if you appreciate my work :) AK47 Bullet 7.62x39 mm 3part and 1part model Commercial License >> cults3d.com/:2847465
This model is compatible with the lego system.
Simple wall mount for the LEGO Bugatti Bolide (Set #42151 and #42162) to be able to hang the completed model in a vertical orientation. The pegs slide into the open area in the floor just in front of the rear diffuser, and are angled at…
Metric socket head cap screws M6 with hexagon socket (DIN EN ISO 4762). Lengths 10, 12, 16, 20, 25, 30, 35, 40, 45, 50, 55 and 60 millimetres. The hexagon socket is slightly modified so that bits, screwdrivers etc. fit better. Metrische…
The winged cone for blowgun darts is made for blowguns in caliber .625 (like the big bore from Cold Steel). The wings should force the dart in a little rotation in order to stabilize the flight and increase accuracy. You may need a bit…
A compact tube-style enclosure designed for the Seeed Studio XIAO nRF52840 & Wio‑SX1262 Kit . This case is suitable for portable Meshtastic or MeshCore LoRa nodes , powered by a single 18650 Li-ion battery. The cylindrical design protects…
This model is compatible with the lego system.
I downloaded this file off of Grabcad. The author of this version is Hans de Ridder who made some changes to the original by Ferdi Kahraman. I repaired some issues to the model and made printing possible and easier. See link…
Collection of screws (ISO 4762 / DIN 912) including : M6x 6, 8, 12, 16, 20, 25, 30, 35, 40 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would recommend…
Wall mount for Makita DUB362 Leaf Blower no support need the design was made to store it with or without battery
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
7.62x39mm, also known as 7.62 Soviet or 7.62 AK, is a centerfire rifle cartridge designed in Russia by a group led by N.M. Elizarov in 1943. Print this for props, display, education, training, just because it's cool, or scale it up to…
This is a remix of dhiltonp's battery holder that fits CR2450 and CR1620 batteries
30 RND - ISH, I HAVE NOT CONFIRMED I AM GOING TO ADD 20 A RND MAGAZINE, IF I CAN FIND MY REAL ONE (HEHEHE). I HAVE ALSO ADDED A VERSION WHERE YOU CAN BOLT IT TOGETHER SO YOU WONT HAVE TO TRY TO CLEAN OUT ALL THE SUPPORTS FROM THE PRINT.…
This model is compatible with the lego system.
Alternative base for DeWalt DCW600 and D26200 milling machines. I made this base so that I wouldn't have to screw the original base onto the milling table every time I wanted to use the milling machine on the table. Cutting depth…
This model is compatible with the lego system.
Needs support to Print!!
Stop chips from getting in your T-slots with the Snap in T-Slot cover
This model is compatible with the lego system.
Slug or diabolos Print in TPU With steel ball as inlet see also suitable pelletboxes for 9mm or 7,62mm
The design was inspired from MizzrBear's design. This is not a remix
Collection of screws (ISO 4762 / DIN 912) including : M8x 8, 12, 16, 20, 25, 30, 35, 40, 45, 50 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would…
I printed it (also) in PLA, PETG or others more solid materials would be a better decision, IMHO. It turns out this device wasn’t really made to lean against the wall, so I did what any person with a 3D printer would do: I printed a wall…
This model is compatible with the lego system.
This model is compatible with the lego system.
SKF 6200 series ball bearings archive