123 modeli
Modeled in two parts, which slide over top of one another and lock into place to hold the processor securely within. This particular tray (I am making a series of these for the older processors in my collection) is for Intel Socket LGA775…
Wydruk około 0,57 €–0,69 € nettoWstępna wycena jednego wariantu
Its an Turbine blower remix to fit an 775 motor. The original is from JolietDelta. I improved the design to fit an 775 motor. Also the turbine is a lot bigger than the original, the parts fit on an 200x200x100mm (LxBxH) bed. You can…
Build Mod Hack 5mm to 8mm Coupler This is intended to fit a 5mm shaft of a stepper motor that has a D shaft and a 8mm lead screw Dimensions: D = 20mm H = 25mm Printing: Nozzle 0.4mm Layer 0.2mm Infill 35% Min. Hardware: Screws: 2 - 3mm x…
Simple and effective 3D printed duct fan that you can build with a 775 motor. I also tested it with BLDC motor from a drone and it works great. The only downside is that it's quite loud but that is the case for most of the ducted fans. It…
One of those things you do when you're bored. Just for fun :) Physically definitely not correct, but still makes a lot of air at the exit. Needed parts: - 4x M3 min. 20mm / max. 25mm long - Socket Head Screws - 2x M4 x 8mm - Countersunk…
This is a simple model of gear for 775 motor that I designed to test how durable it is. It is a part of a bigger project that I am working on now. Maybe someone will find this project usefull. Easy to print and assemble and gives you a…
This planetary gearbox is designed specifically for a 775 DC motor, offering a compact and efficient solution for high-torque applications. Add lubricant for better and quieter performance. ! Always put on cover ,pinch point hazard!…
Printed in generic PETG at 0.2mm layer height without any supports, 5 perimeters, and 20 bottom solid layers. Write in the comments and post a make. Thank you and enjoy!
A quick and simple mounting bracket for 775 DC Motors. Two versions. One simple and one reinforced. My application did not require a lot of torque so this printed on PETG suffices for me. * UPDATE 2020-Oct-01 * Fixed dimensions I was not…
Build Mod Hack 5mm to 8mm Tall Coupler This is intended to fit a 5mm shaft of a stepper motor that has a D shaft and a 8mm lead screw Dimensions: D = 20mm H = 37.5mm Printing: Nozzle 0.4mm Layer 0.2mm Infill 35% Min. Hardware: Screws 3 -…
This fan is quite powerful, capable of moving quite a bit of air. You will need 6 6mm M3 screws to build this fan, and either tape or a plastic welding tool (You could even use your printer's nozzle) The fan is fairly large, here are some…
Fits Mount with M6x30 Screws. The Motor itself is screwed onto the holder. Additionally, there is a cable tie holder, just for security. NOTE: This is not my original design. The original design for this 775 DC motor mount is from…
This model is compatible with the lego system.
I changed the design of the motor mount to place the motor higher. Had to adjust the springs because of the weight of the motor. Had to move them outside the house and created two pieces to fit them. Created an optional cap for the motor.…
Needed parts: M8 bolt M8 nut 1 cent (euro cent) coin. Printing advises: 100% infill on both parts, at least on part 2. 200 microns is enough, but it is better to print in 100-150. working even with PLA you can use lubricant on the rail…
This model is compatible with the lego system.
Its a water pump for an Motor 775 / 795 / 895. I printed it in PETG but i think you can use PLA as well. Fits tubes with an inner diameter of 20mm. You need: 8x M5 screw with min. 14mm(max. 32mm) DIN912 8x M5 nut DIN 934 or DIN985 2x M5…
Zapraszam do filmu z budowy powiększenia Baterii do kosiarki Briggs&Stratton InStart 775IS… - Jeżeli chciałbyś zapoznać się z tym co robię na YouTube i Facebooku Zapraszam: https://www.magazynowanie-energii.com - Lista wszystkich…
This model is able to convert old CPU coolers (in my case a lga 775 cooler)that have holes that are 38mm apart from each other. It will make old coolers useful again. Screws required are m3.
LGA 775 sized case for showcase purpouses. Print both parts at 100 percent size. Support is not needed, infill is 15 percent on mine, but it doesn't really matter. The lid is held on by friction alone. The one on the photo is an older…
Model of a warship inspired the British Enterprise Class Frigates. The model is designed to print in two main parts : Hull Deck – It is a tight fit slotting it into the hull and might need a little sanding around the edges of the deck.
This is a compact and efficient cycloidal gearbox tailored for integration with a standard 775 DC motor , ideal for high-torque, low-speed applications. The design emphasizes precision, durability, and ease of assembly, making it suitable…
Support for dc motor type "775". Made for Shapeoko's Z axis support, but nothing prevents it from being used on other machines. I created a plate for Shapeoko Z-Axis to be printed in 3D: https://www.thingiverse.com/thing:2894914 You're…
Printed in Voxel PLA+ I used hot glue to help everything stay together
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/jFroFppcWhO
3 Part Dell Precision 7670 Laptop Stand. You will need 4mm rods cut down to 25cm length. Do not damage the laptop you should use Tape foam on the Touching areas.
i wouldent printit I just used it for cad pouropses
This model is compatible with the lego system.
775 motor object with exact dimensions meant for prototyping and mock-ups Category: Props
A 775 MOTOR-DRIVEN CENTRIFUGAL PUMP IS A VERSATILE, EFFICIENT SOLUTION FOR LOW-TO-MEDIUM PRESSURE LIQUID TRANSFER TASKS. ITS SIMPLICITY, COUPLED WITH THE MOTOR'S HIGH TORQUE AND RPM, MAKES IT POPULAR FOR HOBBYIST PROJECTS, LIGHT…
This Holder is For 775 DC Motor and You can use it in any project that use 775 motor.
I designed this cover to fit a 775 DC Motor.
CPU box for 6 Core 2 Duo/Core 2 Quad/Pentium/Celeron for Socket 775. One file with both pieces (top and bottom). Print separately as depicted on the screenshot. I invite for to visit my webpage with links to social profiles and other…
Inspired heavily by Bluetopia's shaker motor case, but designed to accommodate a larger shaker motor, specifically this one: BestTong DC 12V-24V 8000RPM 775 Brushed Vibration Motor DOUBLE-HEAD High Torque Electric Vibrating Motors with 2…
The dell Precision 7750 have a quite vunerable usb-c docking. This is a tpu support to release the strain of the connection.
I purchased some 775 motors with a 19 tooth pinion gear from online with the objective to mount it to my kids' PowerWheels. Didn't get around to it until recently. The 19T pinion doesn't line up with the stock gears and as such it needs…
Box for 20 CPUs on sockets: LGA775 LGA771 LGA1150 LGA1151 LGA1155 LGA1156 mPGA946 mPGA988 and more 38x38mm CPUs
This model is compatible with the lego system.
The original file found at https://www.thingiverse.com/thing:2952775 has a rather obnxious tag on it. I removed it with Meshmixer and am now hosting it here for all to enjoy. Print instructions Category: 3D Printing Summary The original…
Notes: don't print the dummy motor use 100% infill for the rotation part rotating part uses M3 screw and nut to tighten look at combined parts for reference use fitting screws to fasten the bracket
Intel Celeron D346 processor keychain The processor has an LGA775 socket. Printing parameters: material: PLA/PETG temperature: 200°C-230°C speed: 60mm/s layer: 0.2mm infill: 100% supports: yes nozzle 0.4mm Assembly instructions: You need…
This model is compatible with the lego system.
This model is compatible with the lego system.
I thought about clicking “NSFW content”, because this pencil holder is lewd. It isn't, actually. It's a pencil holder. It holds pencils. Or, to be precise, it holds one pencil (at a time): a Mars Staedtler Micro 775 . Which rules. It also…
Hyundai i40 87759-3Z000 Grommet-Side Sill Moulding Mounting
Pot for water testing for Modular Hydroponics Tower from Thingiverse (5712775) . Thanks and regards to Luitzor for creating the tower. The pot can be printed multi-material or single material. How it works: Place the pot in the tower…
This model is compatible with the lego system.
This gearbox is designed to reduce speed while increasing torque, making it ideal for DIY mechanical projects, robotics, and prototyping. This gearbox was specifically designed for the pulling mechanism of a PET bottle recycling machine.…
This part is ment to replace a broken glove box stopper on most honda cars. I recommend printing it abs due to high temps in a hot car
Intel CPU stand for size processors 38x38mm. In my case it's mounted a 775 CPU. I don't know if the stand is good for other CPUs. Print Settings Resolution: 0.2 Infill: 20% Filament: Sunlu PLA+ Blue
This model is compatible with the lego system.
Use PETG at minimum 80%
The "Coolinator" is a 775 Motor based Ø 280mm Ventilator Requirements: 6x M4 x 12mm screws (optional 2x hex-head-screws) 4x M4 washers 2x M4 nuts Assembly: The rotor is put together and the wings are fixed with 4x M4 x 12mm screws The…
I had an old core 2 duo system that was broken, with a decent cooler on it, and just the stock one for my AMD FX CPU, so I decided to make an adaptor for it. I used M3xH4 threaded inserts for the intel cooler with the screws from…
This for the ring that holds the cake decorator nozzle on for model 1775. This is for the model that has two tabs that lock in place and not the newer threaded 1776 design. This ring is known for cracking. I would suggest hand washing…
This model is compatible with the lego system.
A flywheel that I have designed that fits on a 775 Motor. You can use it to repell nerf darts or something like that.
this is a 4 blade toroidal fan meant for 775 d shaft motors and high rpm I printed mine using pla at 25% infil it's helpful to use the flat as the contact with the table. It may be beneficial to print a flat hub to help keep this flat…
RS-775馬達支架是固定RS-775馬達最好的幫手 ，列印這個支架來作為工具使用，可以達到省運費和省時的效果(網路訂購)。 以上照片為模型原圖，用游標卡尺以最小公差建模。 使用Bambu Lab P1P列印，耗材是Bambu Lab PLA Basic The RS-775 motor bracket is the best helper for fixing the RS-775 motor . Printing this bracket to use as a…
Simple adapter to allow the use of the Titan TTB775VAC Vacuum with Makitas DBO180Z Cordless Orbital Sander. Chamfered connections allow for solid fit
a clamp which can be used to fix a 775 dc motor on a flat plane
This is just a cover for 775 electric motors used on many projects. I made it to cover the 2nd shaft on the back of the motor on the Mini Belt Sander from Banggood. It has a 10mm hole on the side if you want the wires to go out there or…
Printed parts to create a geared dynamo / motor, intended as a component for a bicycle, either exclusively for charging components, or driving an E-bike. A photo of a fitting test has been included. The intention of this test was to…
This is a quick adapter ring I created to hold the original 775 Motor after upgrading to the hand router mount. https://www.thingiverse.com/thing:3697793 Now I have the flexibility to use the original 775 or the hand router depending on…
The Modular Hydroponics Tower by Thingiverse (5712775) is a great model, but I was bothered by the fact that I couldn't properly clean the filter, which is unfortunately permanently integrated into the model. That's why I designed this…
Work in progress... I lost the different versions of the freecad file, I'm designing a new one. Category: Automotive
Very basic stand to hold up Intel LGA775 CPUs like Celerons and Pentiums from the mid 2000s. Holds the CPU at a 10 degree angle, and uses less than 1g of filament, while not blocking view of the front or rear.
I have lots of old CPU's laying around… In an attempt to organize them, I have created a few trays/boxes for cpus. Nothing fancy, but they work for what I need. This particular tray is for an Intel LGA775 CPU (sometimes called Socket…
4:1 planetary gear for Rs775 DC motor
Das Modell ist speziell für das Notebook Dell 7750 konzipiert. Ich habe Euch eine Fusion 360 Datei der Füße für Eure Modifikationen mit eingestellt. Gedruckt hab ich das Modell in PETG. Das Modell ist ohne MMU gedruckt worden. Ihr müsst…
# Dell 7750 Dock Fix ## Update 20211020 Improved top and bottom embedding of the extra rib to strengthen the outside of the shell. Widened the gap between the core and shell around the extra rib. Deeper gap behind the screw handle to pull…
This is a replacement part for the BMW 5 Series Touring (F11). It is the sliding clip ("leash" or "dog") located in the D-pillar track that automatically raises and lowers the rear cargo blind (luggage cover) when the trunk is opened. OEM…
This model is compatible with the lego system.
All Lathe DIY Machine https://3d4diy.com/category/diy-lathe 3D Printer Machine DIY: https://3d4diy.com/category/diy-3d-printer All mini CNC Machine Homemade https://3d4diy.com/category/mini-cnc All Milling CNC Machine Homemade…
here is a simple model of a lga 755 cpu dummy (made for prusa slicer)
The funnel fits on the IKEA muscovado lid and 5-gallon lid of the Modular Hydroponics Tower from Thingiverse (5712775) . Thanks and regards to Luitzor for creating the tower. Printing: Material: PETG (certainly also printable with PLA but…
I was building old lego set I had but I noticed that one of the pieces was missing. I couldn't found it on sale on any official site and I didn't wanted to pay shipping and stuff to some suspicious guy on the internet so i decided to 3D…
Made to hold a 2in diameter peristaltic pump (specifically this one https://www.thingiverse.com/thing:454702 ) and a 775 drill motor. Includes and adapter from the motor shaft to the pump. Also has fittings for m3 nuts to be inserted so…
LGA 775 to AM4 cooler adapter. For the best thermal resistance, print it in at least PETG. Be careful with the tightening pressure! The bracket is not that flexible, and you can damage the motherboard if it's too tight! You need 4 M3 20mm…
Description Protective storage case for Intel LGA 775 CPUs. The case holds a single CPU and snaps closed without screws. The top has an opening that leaves the CPU visible, so the model name and other markings can be read without opening…
This is a resin-printed tool to open the split barrel on the ETA/Valjoux 7750 family. It is based on a lathe-turned lucite part by Jeff Grieff. It uses a 2.5mm socket head cap screw to press against the barrel arbor because (1) I had one…
Box for 250 CPU LGA 775, 1150, 1151, 1155, 1156 box dimensions 210x210x90 mm *** model is experimental - for me is working fine in future ill try make universal box for more cpu sizes like s3 s5 s7 s370 socket A, s754, AM2/AM3 and some…
I need to keep my hot phone cool so I made a duct for good old 775 socket Intel fan.
Backplate for socket 775 designed to support the mounting bolts for Coguar Aqua 240 AIO to 775 motherboards. Verified working on an Asus P5B Deluxe motherboard with Intel Q9650 CPU.
Remix of 3D printed Grass Cutter Trimmer for 775 motor. Source files included. Category: Outdoor & Garden
Shoot discs out of this launcher at a high speed.
Bronzový pomník selského povstání roku 1775 se nalézá u silnice I.třídy spojující Hradec Králové a Chlumec nad Cidlinou v okrese Hradec Králové . Bronzový pomník z roku 1937 je dílem akademického sochaře Jakuba Obrovského a je chráněn…
The Worx WA3775 power supply is rated IP67 and can safely be installed outdoor, but: you should probably not put it directly onto the ground it may still overheat during summer if directly exposed to the sun I didn't want to drill some…
i designed this to make a small rotary tool out of dc motor. it fits snug around the motor. Holes on top case are matching mounting holes for dc 775 motor. bottom piece screws on the top piece. bottom part will hold 8mm push button
A small part at the suction pipe was broken. It holds the pipe and the suction nozzle together.
A couple different mounts for the Ender 3 CNC one is for the cheap $25 775 spindle motor that comes on all the cheap chinese cnc, and the other is for the marker attachment or just small things.
Dust Shoe for use with the GS-775M Spindle , add stick on bristles or tape to close z gap.
case for a 775 spindle that came with my MYSWEETY 2 in 1 7000mW CNC 3018 Pro. when using the laser i thought it would be nice to have something i could put the spindle in an keep it stored an safe, with mine i fixed it where i just unhook…
A cap for this standard spindle design. Print as oriented in the stl, delete whichever style you do not want; the hole is sized for a 20x12mm rocker switch. Fit the lower half, I use a tight cable-tie to get a good fit. There are no…
LST ring suitable for the plant pot for Modular Hydroponics Tower by Thingiverse (5712775) . The ring is attached to the bottom of the plant pot and allows you to secure your plant in 9 positions with binding wire up to 3 mm thick. Thanks…
Files marked “alt” are designed to accommodate the shrinkage of Polycarbonate filament, while standard would be a replica / interference fit. Also available for purchase at kytor.com/store
SRH-775 Antenna connection seat Video in Bilibili https://www.bilibili.com/video/BV15ksie7EQz/
If This Bot Sees You Search 5383377511 On Google It Will Get Mad
4 port siren for a 775/795 motor if there are problems please comment them (not tested)
