177 modeli
Model je určen pro zkušené modeláře. Model je stejné koncepce, jako zde mnou zveřejněná dakarská Tatra z roku 1990. Pro tu jsem ale sepsal podrobný návod, doporučuji přečíst a nastudovat! U Tatry 6x6 je větší změnou pouze poháněná přední…
986 GT3 Center Console Delete The split file is to fit on a Prusa Mk3s Recommend using PETG Must remove orange tabs on the bracket to mount Left enough room to upholster part Fit as one part on Prusa XL. Used PETG with organic supports.…
http://www.modellbau-wiki.de/wiki/Behelfspersonenwagen A MDyg 986 in gauge 1 (1:32) will be ~700 mm long. Luckily the Deutsche Bundesbahn MDyg986 "Behelfgepackwagen" is very symmetrical. I "only" needed to design a quarter of this express…
Wanted to use a 4" Dayton Audio Full range speaker that i was familiar with. sounds great in the car. can use M4 screws directly into the plastic or use the version with M8 thread adapter version to increase mounting strength. Update…
3D model of the Porsche Boxster 986 and probably 911 996 frunk trim cover fastener. Porsche part # 999 590 036 40. Most of mine were broken or missing, so I remodeled them in CAD and printed my own rather than giving more money to the…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Originally published here: Samsung Galaxy S20+ g985 & g986 case by tato_713 - Thingiverse This case was designed for the Samsung S20+, including the 4G and 5G versions, but not the S20 nor any equivalent phone. Thanks to Thiago Almeida…
The windshield/wiper cowl on the Porsche Boxster (986) are notoriously prone to breaking. It's possible this may work for the 996 911 as well. When this happens the ends become loose and flap around and the cowl no longer makes a good…
This model is compatible with the lego system.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is compatible with the lego system.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Rear trunk emblem for a 986 Porsche Boxster
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I went ahead and created new fonts and numbers for our Porsche 986 as the old one were long gone. This has been our fixer upper car and it was great to print a part that are as expensive as 80 euros. The print is pretty simple and is as…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A planter for plants. It has some nice drainage holes built in and comes in a variety of sizes from 50% scale to 130% - the largest that will fit on our MK3 beds. Trays included. Each scale has its own tray except 50% - use a 75% tray for…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
time to take that oldy Foxbody to the asphalt!... or at least at your wall
Holder for bigger speakers for Porsche Boxster 986. Print with PET and 50% infill.
LEGO TATRA DAKAR 1986 Base
A remix of a previous planter design (The 6986 Planter). Insert chopsticks from to-go food and connect with the connector pieces then run a piece of string or wire through to create a scaffolding to support your plant. This pot is as…
I found the base model truck from tinkercad I modified it in multiple different ways, wider fenders for clearance modified truck bed, hitch on front and back and battery cut out + more, thanks and enjoy :)
From Wikipedia: “The Great Salt Lake is the largest saltwater lake in the Western Hemisphere , [1] and the eighth-largest terminal lake in the world. [2] It lies in the northern part of the U.S. state of Utah , and has a substantial…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Sci Fi Movies - Aliens - Bishop - 1986 3D printable model.
Airwolf - Stringfellow Huckleberry - 1984-1986 3D printable model.
Maximum Overdrive - Green Goblin Truck - 1986 3D printable model.
Platoon - Big Harold - 1986
Top Gun - Lt. Nick Goose Bradshaw - 1986
Ferris Bueller 3D Print model. This one prints in 3 pieces, the figure, the name sign, and the square base. If you change the size of any part, you will need to resize all parts accordingly. Glue the letters together in a stack after…
Stephen King's IT - 1986 3D printable model. Super easy to print. This is a large model and will take a long time and a lot of material to print.
Airwolf - Dominic Santini - 1984-1986 3D printable model.
Top Gun - Charlotte Charlie Blackwood - 1986
My car was missing a part and you can't get them from Porsche anymore. I put my own spin on the part and created own bracket to ensure the cabin air filter doesn't pop out of its housing. Uses the factory holes and a couple of automotive…
Platoon - Lieutenant Wolfe - 1986
Jon Bon Jovi - Slippery When Wet - 1986 3D printable model.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Platoon - Sergeant O'Neill - 1986
The Hitcher - John Ryder - Rutger Hauer - 1986 3D printable model.
I modified the part by masticating_moose to fit a 3 inch full range driver instead of a 4 inch model. This will be installed as part of an aftermarket two-way system where i upgrade the tweeter in my 1998 boxster 2.5 installed with the…
Red Dawn - Chris Taylor - 1984
Sci Fi Movies - Aliens - Rebecca Newt Jorden - 1986 3D printable model.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Top Gun - Carole Bradshaw - 1986
Hardcastle and McCormick - 1983-1986 3D printable model.
WHAL 9860 #2 trimmer guard. Category: Household
Top Gun - Cmdr. Mike Viper Metcalf - 1986
Howard the Duck - Lea Jamming - 1986 3D printable model.
Airwolf - Michael Archangel Coldsmith-Briggs III - 1984-1986 3D printable model.
CZ korba je mix toho co se mi líbilo a co bylo funkční, par nápadu třeba jako rezervy z boku napadlo mého tátu když jsme se o tom bavili, nápad to byl dobry. No ale i tak to není replika ničeho, nebo tak nenasel jsem nic co by takto…
Horror Movies - The Fly Collage - 1986 3D printable model.
Howard the Duck - Overlord - 1986 3D printable model.
War Movies - Heartbreak Ridge - Swede: I'm gonna Rip Your Head Off and S--t Down Your Neck - 1986 3D printable model.
The Money Pit 3D printable model. Prints in 3 parts. The big background, the figures, and the sign. If you don't want to use the big background, you can glue the figures and the sign to a generic base, I've included a simple base for your…
Iconic Movie Moments - Little Shop of Horrors - I Am Your Dentist - 1986
Iconic Movie Props - Top Gun - Maverick's Flight Helmet - 1986
This model is compatible with the lego system.
This model is compatible with the lego system.
Printed with 3 walls at 20% infill, but 2 walls and lower infill would probably be fine. 0.2 layer height and 0.4 line width worked well for me.
Ferris Bueller's Day Off - Ed Rooney (Jeffrey Jones) - 1986 3D printable model.
This is a remix of this fx-9750GII cover , chopped up and stretched out with some very hacky OpenSCAD to fit an fx-9860GII. As printed, the fit is a little tight. If you'd like to loosen it you can either increase the case_extra_width…
Replacement Cover Cap For Thule Evo Raised Rail. This is part number 1500052986 or 52986. I lost two of these so far, so I made a printable replacement in SolidWorks. Print in FLEX or TPU TPU supports are tough to remove but you don't…
BMW E30 M3 1986-1991 Racing
Matlock - Benjamin Leighton Matlock - 1986-1995
Matlock - Charlene Matlock - 1986-1995
This works as a replacement reserve fuel valve petcock lever with part number: 16952-HA7-880ZA. I built the model with a sacrificial 0.2 mm layer where the hole transitions in order to force the slicer to build a bridge there. Just poke…
CZ Spz s vice barvami které jdou tisknout výměnou barvy po určíte výšce v tomto případě výměna barvy po vrstvě ve výšce 0.6mm výška vrstev 0.1mm bez podpěr případně zapnout ironing pro pěknější výsledky EN Number plate with multiple…
Dempsey & Makepeace - Det. Sgt. Harriet Makepeace - 1985-1986
The Trap Door - 1986 3D printable model.
