842 modeli
The remake of Puse RC1 and RC2 face shield. RC3 is mix of RC1 and RC2, it has extra space for glasses/goggles and better side protection. If you are printing it for someone else, please wash hands very well and carry mask/shield when…
Wydruk około 0,87 €–1,06 € nettoWstępna wycena jednego wariantu
I made this model because I’m really pretty picky with the type of paper I use for my notebooks and sketchbooks so I made the Hexbook one with interchangeable paper. no print support needed. Print the cover 2x, spine 1x, clip 4x. The…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This version is for A4 size (Portrait or Landscape). Optimized for stacking, with flat top and total, constant height of 12.9 mm. Therefore it could be utilized only with narrow strap (8 mm), or if the strap is wider, it needs to be soft…
Wydruk około 1,36 €–1,66 € nettoWstępna wycena jednego wariantu
Additional parts needed: Rasberry Pi 4b 40 mm PWM 4V Fan (such as Noctua NF-A4x10 5V PWM) 4x M4 countersunk screw (Normally supplied with the fan) Optional: 4x M3 nut and 4x M3x6 screw (To screw Raspberry pi securely into the case) Print…
Wydruk około 3,63 €–4,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EN: if you dont have a rod at home for the gadget- print one! Exact size for A4-sheets. Material: PLA Layers: 0.3 Supports: no see also https://www.printables.com/de/model/834685-mini-photo-booth-rod-for-a3-sheet…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
2D version of the Austrian tank Leopard 2A4
Wydruk około 1,21 €–1,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Rpi4B case designed to be use with a NOCTUA NF-A4X20 5V FAN Use the screws provided in the fan package to mount the fan on the Rpi Support. Use M2.5 screws to fix the Rpi on his support *Gaps in front of the fan section could be use to…
Wydruk około 0,97 €–1,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UPDATED 04/11/2020: After playing around with the stock Prusa frame, it turns out that if you flip the frame over and install the shield with the pegs on top, you can use the 10mm height v2 visor and it fits great. Check photos for…
Wydruk około 1,74 €–2,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a fan duct to go in between the side panel of the Dan A4 H2O and the Thermalright AXP-90 X47 Copper Cooler. Without this, the hot air of the CPU and PSU recirculate in the CPU cooler. This made my 5800X3D drops by 7c since it can…
Wydruk około 0,81 €–0,98 € nettoWstępna wycena jednego wariantu
Base Stand / Feet for the Watercool MORA4 (MO-RA) Radiators. Works on the 200, 400, 600 versions of the radiator. Only tested on the 400. Dimensions 150 x 50 x 25mm. There is enough espace for mounting both grills (front and back) and…
Wydruk około 2,91 €–3,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Summary: The original part cooling fan for my Ender 3 broke. I like noctua. I did not want to buy any extra hardware to mount it. It took like 3 months of iteration to land on this design. I've included the .obj, .stl, .3mf, and .gcode…
Wydruk około 2,47 €–3,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
MK3S Stepper Cooler + noctua 20mm This one is not that loose, what I found online was all loose like ... "bíró seggében a lóf@sz" :-) No glue or screws nor double side tape needed to fix this one just clip it on and use it. Stl & Fusion…
Wydruk około 3,23 €–3,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
After print, remove suports and put turret int the hull. Model is for printing, some parts of the tank are not there (like machine guns on the hull, drivers periscope, etc.). If there are any problems, please send me a message.
Wydruk około 3,79 €–4,63 € nettoWstępna wycena jednego wariantu
Generated STL with ChimeraX
Wydruk około 5,69 €–6,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mit diesem Bauteil kann ich an einem Fahrzeug oder anderen eine Infotafel aufstellen. Geeignet für DIN A4 und Laminiert Die Infostafel hat eine leichte schräge nach hinten um noch besser wirken zu können.
Wydruk około 9,72 €–11,88 € nettoWstępna wycena jednego wariantu
All that photo stands I saw was missing one thing - strength. They fell apart easily. Others were to bulky to print. So, I made my own. This stand provides a sweep, or curved, seamless background for photographing small to medium sized…
Model consists of 4 bars (two sides, upper one and lower one) and four connection pieces. The longest one is the side bar and can only be printed diagonally on the bed. Lower bar has two integrated latches that hold the picture from the…
All that photo stands I saw was missing one thing - strength. They fell apart easily. Others were to bulky to print. So, I made my own . And then I found that design could be improved. This stand provides a sweep, or curved, seamless…
Passionate about aeronautics, I wanted to modelize this aircraft. Designed in several parts, this model can be printed without difficulty and with reduced supports. The canopy being designed separately from the main model, it will be easy…
A simple stand that turns a regular sheet of A4 paper into a seamless "infinity" background for photographing small objects. The paper slides into the side supports, creating a smooth curved backdrop without visible corners. The side…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
Couldn't find a printable document holder to mount on a wall, so i designed one by myself. It suits a good amount of A4 documents (or smaller). It has a honeycomb design to use less filament while still being stable enough. You can mount…
Print list: x2 upper x2 lower x1 central
Another project that is a bit over the top to solve a very not over the top problem. Cool thing is though you can build it as high as you want and it is definitely very strong! When I was designing this, I thought it made sense to cut the…
Leopard 2A4 Tank Model Scale 1:72 The turret is designed to rotate using a bearing mechanism, adding functionality to the display. Assembly requires gluing the parts together for a secure fit. The model includes separate black tracks.
-Two colors -organic support -0.15 layer height
Here's a compact stand for taking great product photos with the right background! Designed with SolidWorks. Category: Camera
A4 folders The file folder can easily collect magazines, journal, books, stationery or other office supplies, let your office, desk or bedroom became neat.
This is a way to save the space on a desk and sort your docs by 3 categories. :) It is recommended to have a brim on as most likely it gonna pick up corners due to filament thermal expansion effect. Support creator here: PayPal me :)…
Based on the Headband "Brasil V2", but with A4 format shield. Reduced size/volume of both headband and the lower reinforcement. See pix for comparison. Included two DXF for the A4 sheet as well - Portrait and Landscape. The 3D printed…
An A4 paper tray with stackable tabs. No Supports. It's large, so you'll need a big printer bed!
Remix of a paper holder I like, but with less filament. Fits A4 papers, laminated A4 papers and some paper pads.
DIN A4 Wandprospekthalter mit Bohrlöchern (Wall brochure holder with drill holes)
General Info & Fasteners The dust cap on my Audi S4 headlight was super cracked and not watertight at all so I designed this replacement. I've only used it on the right hand side headlight but if you mirror it it will probably fit the…
🖼 A4 Size 3D Printable Picture Frame – Modular, Minimalist & Secure Showcase your favorite photos, artworks, or prints with this sleek and modern A4-size picture frame – fully 3D printable and easy to assemble! Designed with simplicity…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 I needed to display some information at a point of sale quickly, and only really had A4 paper and a laminator available, so I designed a rough stand and used it for the display and then came back to refine it a little. This…
Printed with 0.2 mm nozzle, 0.08 mm resolution. Support everywhere. Two holes for steel pins added for better rigidity of clip, pins additionally glued with epoxy. Enjoy. Print Settings Printer Brand: Creality Printer: Ender-3 S1 Rafts:…
UPDATE: updated versions of the fastprint is located here as I couldn't update the files on this page anymore: https://www.prusaprinters.org/prints/26902-prusa-face-shield-speedprint-rc2-a4letter-iso838 UPDATE 2020-03-23: Updated with a…
for Audi A4 B6/B7
Fan shroud to mount an Noctua NF-A4x10 to an LSI 9300-8i HBA. Design idea copied from @BlackHornet_355398 's fan shroud here: https://www.printables.com/model/377809-lsi-9300-16i-noctua-nf-a9x14-fan-shroud I have a LSI 9300-8i, but this…
Paddle shifter extensions for B9 Audi's. i only know for sure what it fits on the A4/5 and S4/5, i think it works on the A3/S3 as well. i know it does not work on the RS5 as those are slightly taller. these hook over the top and snap in…
This is an A4 organizer with 5 slots 3cm wide. It can be printed in vase mode with a 0.6 line width (yes even with a .4 nozzle). So prints quickly (for the size, around 10h quite easily on any 3d printer, I am using an Ender 3). I printed…
Hey Guys saw a dude trying to sell one of these on FB marketplace so opted to create a similar model. I had some white ABS so went with that. V1 is the one i printed and for the v2 model i increased the pocket as much as possible.
A wall-mounted holder for A4 documents - we use it for underneath our calendar in the kitchen. Prints OK without supports, and has a couple of flat areas on the back in case you want to use double-sided foam pads instead of the screw holes.
This is an A4 card tray to print on printable pvc cards. Normaly you can replace a cd-tray for an pvc card tray. But with the Epson Ecotank series that is not posible. Becouse my Epson ET 8550 has an cardstock feeder from the back side of…
UPDATE3: Uploaded STEP files and F360 files. UPDATE2: Updated model that uses a standard 4-hole punch (80mm between all holes) UPDATE: I have created a model that fits the original Prusa hole pattern (60 mm between the middle holes and…
Fan shroud to mount an Noctua NF-A4x10 to an LSI 9400-16i HBA. Design idea copied from @BlackHornet_355398 's fan shroud here: https://www.printables.com/model/377809-lsi-9300-16i-noctua-nf-a9x14-fan-shroud I have a LSI 9400-16i, but this…
Ersatzmesser Ersatzklingen Für STIHL FSA45 Polycut 2-2 / Replacement blades for STIHL / Stihl Trimmer Blades
This is a remix of the PRUSA RC3 Face Shield, in 888 format (the holes are 80-80-80 spaced for a standard 4-hole punch, unlike the 80-60-80 of the original). This version is also reduced in height, with a 8mm tall section for the visor…
A simple "inbox" or "paper organizer" type thing for papers, magazines, etc. Designed to save space on your desk vs. lay-flat organizers, plus, it prints 100% with NO SUPPORTS! This one is A4 sized, but you can scale it down for other…
This place for some special versions, as there are cases with high volume specific needs, like users need specific strap or do not need certain features, trading them to gain print time. Check the gallery on what there is, so we don't do…
The bottom recess will fit a single 8x3mm magnet. I'd recommend printing with PETG if possible (less brittle). The original model was designed for assembly as opposed to print-in-place. Printing the parts separately will likely yield…
This is a generously proportioned desk drawer that fits an A4 notepad Features Clean minimalist front A4 notepad-sized interior (222mmx313x47) Hidden handle Prints on MK3-sized bed No supports are required. I printed the back with 2…
This is the cap for the tow hook on the front bumper for Audi A3/A4 2001-2005 B6. Mine is delicately and diligently broken by the tow car driver. So I designed a new one. (Note that the photos are from an older version. The one I uploaded…
Old computers are great, but the plastics don't stand the test of time, yellowing through brominated flame retardants, or just getting brittle with age. The Amiga 4000 is one of those affected, and due to the limited numbers they were…
A minimalistic model for organizing your papers on the wall. Designed to use as less plastic and time as possible. Possible to print with draft 0,4mm layer size upright without supports. I use 115% speed without issue on my Mk3s 1h 45min…
I couldn't find a good speaker adapter for my '03 Audi A4 so I designed one based on the OEM speaker. The model has a hole for Metra 72-9002 speaker harness adapter to slide into and 2 zip tie slots for cable management. There are 3…
New nozzle to probe Y offset is now 21.65mm instead of 22mm.
An A4 Paper tray that can be fitted underneath a shelf. Prints in two parts and slots together. Holds very firmly but have also added a clip to keep joint stable, it will however work perfectly well without the clip. No supports needed.…
The Original Model was designed by Maggamaker on cults3d. Maggamakers Original 3D File https://cults3d.com/en/3d-model/tool/audi-a4-b5-vent UPDATE 07.06.2024 Added a mirrored version to mount the Magsafe Adapter on the right side. (Both…
Most laptop stands in the web are for 13" laptops. Others are too big for my ender 3 print bed. Therefore I designed this laptop stand with separate parts to fit my ender 3 V2 print bed. I created this laptop stand to lift the laptop with…
Adapters to upgrade your Audi A4 B5 1995 speakers and change from the original NOKIA 4" woofers to 5.25" ones. Applicable to versions without a BOSE sound system (it may be compatible, but I haven't tested it). In my case, I chose Hertz K…
Functional and easy-to-print slide binder, designed to securely hold a stack of A4 or letter-sized papers. It's perfect for students, professionals, or anyone needing a quick and reusable binding solution for reports, presentations, or…
EBB36 GEN2 Mount for A4T Toolhead with Orbiter v2 / v2.5 Mount for installing a Bigtreetech BTT EBB36 GEN2 toolhead board on an A4T toolhead using an Orbiter v2 / v2.5 extruder. This is a remix of the original A4T THB mount from Armchair…
Initially indended to print as a keychain but can also be used as a place holder for a 40mm fan in cad proojects.
This is a remix of https://www.thingiverse.com/thing:3646996 I have modified it to use a 40x20mm fan, instead of the 40x10 fan from the original. Tested with a Noctua NF-A4x20 FLX fan. For best results, print on it's side with…
An (experimental) A4T/XOL carriage for Monolith Gantry SCALE THE CLIPS IN Z ( in the slicer ) TO GET THE CORRECT CLIP FITMENT Information to find ideal height is found on the main Trinity Read.me , under “assembly” Uses the “universal…
Cover for Audi A4 B6 for 2 Din Radio
Version v1.1: changes of the wall thickness Holder would be putted directly on the screws of the Heatsink. fan Noctua A4x20 would fixed with 4 M3x20 screws One Metallholder in the housing have to be bended
(English below) Irgendwann kommt jeder Fahrer eines Audi 80 B3/B4, Audi Cabriolets, Audi Coupe (Typ89), Audi 100/A6 C4, Audi A4 B5 (und etlichen weiteren Modellreihen von VAG aus den 80er bis 2000er Jahren) an den Punkt, dass das Auto…
replacement part to mount your imou ipcamera upside down
Brand we used for laminating the Din A4 Papers: "Leitz 80 Micron Laminating Pouches"
Audi A4 B6 Konsolen Organizer. Ich empfehle PETG oder ABS
I had already designed another A4 paper stand, so I wanted to make another one, but this time a different type. I made two different sizes so you can determine how much paper you will store.
UPDATE: Cable relief geometry fix in v5, cable is more centered now. Some other minor geometry fixes. Mount for installing a Bigtreetech BTT EBB36 GEN2 toolhead board on an A4T toolhead using a WWBMG extruder . This is a remix of the…
Picture Frame (A4) adjusted for printing on Prusa mini.
I upgraded the fans on my Monoprice select mini from the cheap 30mm units to 40mm Noctua. I found a particularly nice design for a velocity stack for 40mm fans that I was going to print out, but discovered that it had a larger center hub…
Simple gadget to create photobox with usual paper sheets. It's better to print with matte white plastic. After print, clear seams on paper insert gap. Stackable design! If you need bigger photobooth - print several, they can be stacked.…
A thin DIN A4 paper holder for the wall (with drill holes).
All A4T-AFC toolheads have been updated with added face components, aligning their design with the A4T standard. Please, if you like, share your toolhead!
I wanted to use the Cartographer probe & CNC carriage with the A4T toolhead which requires removing ~1.8mm from the bottom of the mount. UPDATE: After some testing, it seems like removing the 1.8mm doesn't raise the probe high enough to…
I needed to store large amounts of A4 paper, but none of the designs I found online satisfied me, so I decided to design my own, keeping in mind simplicity, saving material and aesthetics. I created two sizes for different amounts of…
This will only work on Dan A4 SFX V4 or newer as it requires the threaded holes on the side to be mounted, along with the pins and clips. I needed more clearance for a larger cooler than it fits in this case (Thermalright AXP 100 full…
Fuel cap strip for Audi A4 B6, B9 . Tested on 2004 year diesel version. Printer: Creality Ender 3 S1 Filament: Overture TPU Black 1.75 Nozzle: 0.4mm Infill: 100% Nozzle temperature: 210 Bed temperature: 60 Print speed: 40 There are great…
This is a remix, which will add 4 small support pieces between visors to prevent separation during printing. Otherwise, it remains identical, so please visit the A4 remix for any extra information. Additionally, it contains cosmetic…
Samsung Galaxy A40 phone case designed to be printed in flexible material (TPU, NinjaFlex). STEP and F3D file is available for further customization. Case should snug fit to phone, as there's minimal clearance (0,1 mm). In case you need…
Outside Measure: 337mm x 250mm Inside Measure: 297mm x 210mm Magnetics: 5mm x 1mm Use 3M tape to put it on the wall or to substitute the magnetics.
This is a 3d printable magazine to replace the functional magazine that comes with the nerf MA40 rifle toy. I wanted a magazine that more closely resembled the game magazine that did not protrude to far from the stock. I modeled it in…
Just a simple printer paper tray that can be stacked to your hearts content
A tabletop stand designed to hold an A4 or A5 piece of card in portrait or landscape orientation. The stand has a curve to ensure the paper or card is kept rigid. If used outside, a piece of tape on the back will keep it from blowing over.
Mounting kits for mounting 3 Noctua NF-A4x20/A4x10 fans above and 3 fans below the CPU cooler in Fractal Design Terra case. Can be used only in position number 1 of Terra's inner bracket. The top bracket connects to PCI-E riser included…
Replacement headlight covers… Print it out, insert the original seal and snap it onto the headlight.
I dont have to say so mutch about this. It was a request of a friend of mine, and now I can't do anything with the model. So feel free to use it :) Happy 3d printing!
I got tired of my magnet vent clip falling out constantly, so I designed and printed this vent clip. This perfectly fits my car and phone. Unlikely that anyone has the same combination, but hey \ (ツ)\ / The vent clip fits on Audi A4 B5s…
UPDATE: Added a V2 of the NA2 Letter version that might fit better. I don't have tools to test so please give feedback if it makes a difference. UPDATE: Added STEP files so anyone can edit the design or build stacks for even faster…
Here is the Audi A4 B6 in silhouette Suitable as a wall or window decoration
Phone stand for scanning A4 paper
