43 modeli
I created this thing because there is no hood hinge on the Absima Sherpa. Print best in 0.1mm layer height. Screw hole underneath is for 2mm Screws Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: Doesn't Matter…
Simple wheel extender for Dumborc controllers. It's mean for Absima,Yikong,Amewi and others using this contoller :)
I wanted a functional winch for my 1/18th scale mini-crawler, and designed this winch spool and mounting bracket for the Hobby Plus CR-18 truck I have. As long as the bumper mount hole pattern and frame width is the same, it should fit…
Wheel Drive Shaft for the Absima Hurricane RC Car. You have to use the metal stubs from the original shafts and push them into the holes of the model. Have a look at the pictures. I've replaced three by now and none of the printed ones…
Remix of the FTX vantage spoiler by JonnyG30 for Absima AB3.4 Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 100 Filament: Devil Desing PETG black Category: R/C Vehicles
This is an own-created collection of updates for a YK41012 crawler (brushless version) At least some parts should be compatible with similar models from Yikong. Absima calls a similar model CR4.4eco or CR3.4eco How I Designed This…
Simple Skid plate for ZD Racing Absima Rocket AdB1.4 DBX-10. Tinkercad made. Just need longer M3x10mm screw. Print in PETG but PLA will work too.
Body Post for the Absima Crawler CR2.4 Made this for fitting the extra Jeep body... (could also fit the RGT RC4 Bowler / Barrage) Remark: holes must be drilled after printing and the posts aren't the right length, some cutting must be…
I printed this RC Steering Wheel for my Absima CR4T Ultimate the design is based on an ATS 5 Star rim. To use this whee
This is a replacement suspension bracket for the Absima Truggy AT2.4. Print a few and take them with you on the track. Want to buy me a coffee, because you appreciate my work? :D No problem → Over here please.
Holder for the ABSIMA CR3P Transmitter. You can screw it at a side wall or at the top wall to let your control hang down. Print Settings Printer: Cetus3D Rafts: No Supports: Yes Resolution: 0.3 Infill: 20 % Category: R/C Vehicles
The bottom part of the suspension of the Absima Hurricane RC Car. You have to remove the original part and push the "shaft" into this part. I've replaced one until now and it works fine. Print Settings Printer Brand: Prusa Printer: Mk2.5s…
Da der Junior unbedingt mit dem ASB1 fahren wollte, aber sich auf der letzten Fahrt zwei Dämpferteller verabschiedet hatten, mussten kurzfristig neue her. Ich habe sie in PETG mit 100% Infill gedruckt.
This is a steering lever for the Absima Truggy AT2.4. Want to buy me a coffee, because you appreciate my work? :D No problem → Over here please.
Halter für Decke und Wand für die Absima CR6P Fernsteuerung
ZD Racing/Absima Rocket AdB1.4/DBX-10 Sway Bar holder - Support Barre antiroulis Print in blu PETG.
Replacemet Disc for Absima / Ansmann Starterbox Printed in TPU i could not buy this replacement part, so i made my own Tags: starter box starterbox disc wheel ansmann absima replacement tpu 2300033
ABSIMA ASB1BL SAND BUGGY Front or Rear Skid also fits for these cars: T2M Pirate Sniper DF-Models Dune Fighter BSD Racing Prime Desert Assault MODSTER DUNE RACER could also fit for Redcat Racing Blackout...? enjoy!
ABSIMA ASB1BL SAND BUGGY MidFront Skid also fits for these cars: T2M Pirate Sniper DF-Models Dune Fighter BSD Racing Prime Desert Assault MODSTER DUNE RACER could also fit for Redcat Racing Blackout...? enjoy!
I created this spoiler as an alternative for the Absima Speck B. It may also fit the Losi Micro B but I am not able to test my theory. I printed mine with Prusament PETG on the back side of the spoiler. See the screnshot. Should work fine…
Das Absima Logo wurde im BambuStudio hinzugefügt. Gedruckt auf einem BambuLab X1C; 0,4 nozel; 0,2 Layer; Sunlu PLA+ white; no support (print vertikal); 15% infill Zu finden hier: https://www.thingiverse.com/thing:2058961 - danke an “…
This is a rim for the Absima RTR 1:16 monster RC truck. It works also on many other Chinese 1:16 RTR cars. The original rim offset is too small and the inner rim hits on the steering arm. The rim is too thin and this results in that the…
Absima ASB1BL Wheel Hub with Pin (4) Buggy/Truggy Radmitnehmer 12mm (4) Buggy/Truggy Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.1 Infill: 100% Category: R/C Vehicles
I'm modeling them for friend with Yucatan. He didn't broke them yet unlike the original ones, so here is my files :) Just 1:1 replace part for these fragile rocksliders Printed with PETG 50% infill 2 perimeters (flexible)
Need to organize my lipo's in the fire resistant bag while moving around, not when charging, so I made a simple Absima 7.2 Lipo Holder for 3 1200mha packs sizes 65mm x 39 mm x 17mm) (aprox) per battery. Easy Print, no supports needed.…
Print a pair of face, print the beams, screw with M3x10. Category: R/C Vehicles
This forward baseplate was one of the first things, that broke. It is an essential part, trust me. :D If you like this and it helped you out, please buy me a coffee . ;)
Made it for my YK4106 Pro/FMS FCX10/Absima Wolf and FlySky MG11 radios (FS-MG11-BS, FS-MG11-BT-BS). I can barely reach the steering wheel with my thumb so I made this little adapter. 29-03-2026 : added a thicker version for a easier reach…
Hi. I got this fresh new Absima CR4.4eco Bronco style, and immediately started designing some stuff. Lets start with these roof rails. Actually, just one rail which is same for both sides, so just print twice.. Rail has holes for screw,…
Speed Limiter for the RC on the Absima ASB1BL, so that my toddler can drive it too ;) Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 100 Filament: Doesnt Matter PLA Category: R/C…
This is a replacement for the original bottom spring holder at the suspension of the ABSIMA 1:14 High-Speed Truck "RACING" 4WD RTR Printed in PETG for higher durability. Supports on build plate worked best.
Bin dabei meinen alten Absima AMT8 wieder Fit zu bekommen. Habe einige Ersatzteile entworfen. Die STL ist für die linke Seite. Für die rechte Seitem einfach das Objekt spiegeln. Befestigung passen optimal am Rahmen.
Choose the face, mirror one, print the beams, screw with M3x10.
Designed to take place of a 115mm spare wheel. The YK4106 Pro has a huge rear weight bias, not ideal. This lighter spare wheel will allow to gain around 50gr over the real spare tire ... not much, but every little things adds up. May fit…
Empfängerbox mit Kabeleinlässe und Schalterloch (19x12mm Siehe Foto). Verschraubt mit M4 Schrauben. Passt perfekt an den Absima AMT8 Monstertruck. Er kann aber im Prinzip auch an anderen montiert werden.
A simple ring to attach a cord. Best to print it laying down. If the fit is loose you might want to use some glue. Set it to full walls for better strength
Absima 1:24 X-Racer Buggy & Touring Car Stand
Da der Junior unbedingt mit dem ASB1 fahren wollte, aber sich auf der letzten Fahrt zwei Dämpferteller verabschiedet hatten, mussten kurzfristig neue her. Ich habe sie in PETG mit 100% Infill gedruckt.
Made it for my YK4106 Pro/FMS FCX10/Absima Wolf and FlySky MG11 radios (FS-MG11-BS, FS-MG11-BT-BS). I can barely reach the steering wheel with my thumb so I made this little adapter. 29-03-2026 : added a thicker version for a easier reach…
This is an own-created collection of updates for a YK41012 crawler (brushless version) At least some parts should be compatible with similar models from Yikong. Absima calls a similar model CR4.4eco or CR3.4eco How I Designed This…
Simple Skid plate for ZD Racing Absima Rocket AdB1.4 DBX-10. Tinkercad made. Just need longer M3x10mm screw. Print in PETG but PLA will work too.
ZD Racing/Absima Rocket AdB1.4/DBX-10 Sway Bar holder - Support Barre antiroulis Print in blu PETG.
