P
PrintablesVC Design
Universal Cable Holder - Skadis
Skadis Cable Holder, perfect for chargers and other :)
- Pobrania
- 3763
- Polubienia
- 1012
- Ocena
- 4,91
Wyniki wyszukiwania: adis
10 574 modeli
P
Printablesjbnadal
skadis universal hook
Skadis universal hook. Thiner than the orignal one. It's doesn't enter into my skadiss hole. The Freecad model is parametric and could be modified.
- Pobrania
- 2773
- Polubienia
- 198
- Ocena
- 4,85
P
PrintablesHandy Handcrafts
New Improved - Skadis Cable Holder
Here's my wire and cable holder, specifically designed for the Skadis storage system. This innovative holder is designed to fit into your Skadis board, providing an elegant and practical solution for cable management. Its design is…
- Pobrania
- 2222
- Polubienia
- 292
- Ocena
- 4,87
P
PrintablesDaHouzKat
IKEA SKADIS Wall Mount
I like things that are not permanent, easy to install or remove so i created my own Screwless IKEA SKADIS Wall Mount using 3M Command Large Picture Hanging Strips What you need IKEA SKADIS Board or 3D Printed SKADIS Board 3M Command Large…
- Pobrania
- 2196
- Polubienia
- 412
- Ocena
- 5
P
Printablessacrilegor
Small pliers hanger for Ikea Skadis
Included a version without hex holes, if you want to add your own set, or don't need it at all. Hex holes are for 2, 2,5, 3, 4, 5, 6 mm I printed it on vanilla white Prusament PLA, with 0.15 layer height and 0.4 nozzle. Snug supports from…
- Pobrania
- 1522
- Polubienia
- 307
- Ocena
- 4,6
P
Printablesfoxontherun
Skadis / Skådis - miniature paint holder (Vallejo / Citadel / Pro Acryl)
Paint holder for mini paints for the Skadis / Skådis system, three versions that fit either vallejo (or others of the same size), citadel or pro acryl. The dropper bottles (vallejo and pro acryl) fit either standing normally, or upside…
- Pobrania
- 1233
- Polubienia
- 159
- Ocena
- 5
P
Printablessteffenbew
IKEA Skadis Cutter / Scissors Holder
Holder for a slightly thicker cutter or scissors on an IKEA Skadis board. I printed this model with PLA with 0.2mm layer height.
- Pobrania
- 1186
- Polubienia
- 174
- Ocena
- 5
P
Printableskjbturok
Caliper bracket for Ikea skadis or similar
Caliper bracket for Ikea skadis or similar. The hooks have an end to end spacing of 84.40mm. If you want to place the hooks yourself I leave you the following addresses. Original model of the bracket:…
- Pobrania
- 711
- Polubienia
- 78
- Ocena
- 4,78
P
PrintablesTache
Skadis Milwaukee PACKOUT Bin Holders
Created to mount your the Milwaukee PACKOUT bins on the IKEA SKADIS!
- Pobrania
- 707
- Polubienia
- 221
- Ocena
- 5
P
Printableskrisennerd
IKEA Skadis - desoldering pump
Holder for desoldering pump.Fits on a IKEA Skadis Board. Based on the Fusion 360 peg models from Rkimmell73 https://www.thingiverse.com/thing:3734897 You can find the whole IKEA Skadis pegboard one my blog (article is in German):…
- Pobrania
- 474
- Polubienia
- 73
- Ocena
- 4,75
P
PrintablesDFV Tech
Ikea Skadis Hook locking clip.
I designed these small locking clips after getting tired of pegboard hooks falling off every time I grabbed a kitchen appliance. The IKEA pegboard hooks I use are mounted quite loosely and can easily come off the board, so I needed a…
- Pobrania
- 398
- Polubienia
- 104
- Ocena
- 5
P
PrintablesMaWoKo_3D_Druck
IKEA Skadis Halter Imbus / Sechskant Schlüssel
Ein einfacher Nimbus Sechskantschlüssel Halter für die Skadis wand
- Pobrania
- 374
- Polubienia
- 39
- Ocena
- 4,8
P
PrintablesTache
SKADIS Dewalt 20v Battery Holder
This model is a SKADIS holder for Dewalt 20v Batteries. It uses the SKADIS T-Clip system designed by @LineArcLine . It is designed to be easy on and off, bypassing the latch.
- Pobrania
- 317
- Polubienia
- 46
- Ocena
- 5
P
PrintablesW&H
Dnd idea skadis dice holder
Ikea Skadis dice holder. Compatible with RPG dices: d100 d20 d12 d10 d8 d6 d4 There are two versions of this model - with and without D&D logo (see below) Orginal authors: This model is a remix of @Shmoee “ DnD Seven Dice Container with…
- Pobrania
- 307
- Polubienia
- 91
- Ocena
- 5
P
PrintablesJL_Design
Skadis to Kallax Adapter
Adapter to mount some Skadis Boards to Kallax in horizontal mode. 2x M4 nuts required. Just print the files in the orientation, add a pause command at ~14.4mm, insert the nuts into the part and resume the print.
- Pobrania
- 227
- Polubienia
- 93
- Ocena
- 5
P
PrintablesKureKureci
IKEA SKADIS Peg (new version)
An Ikea Skadis compatible peg. This new version has improved reliability, stability, and grip. There are also tiny ribs that do not damage paper under normal spring strength but hold things much better. I use springs from clothing pegs…
- Pobrania
- 221
- Polubienia
- 89
- Ocena
- 5
P
PrintablesWegBier
Tradfri On/Off Switch Skadis Mount
An IKEA Skadis mount for the Tradfri On/Off Switches. The base plate from the Tradfri switch is screwed onto the Skadis holder with two M3 nuts and bolts, I used M3x6. You could also just use the provided double-sided tape to fix the base…
- Pobrania
- 219
- Polubienia
- 68
- Ocena
- 4,67
P
PrintablesPenguinNinja
Skadis Boards Linker - Tighter Fit Remix (Non-magnetic version)
This is a remix of the Skadis Boards linker by Koprov that has thicker pegs to provide extra tight fit in the board's hole. The fit now is very tight. In addition to the original model where you could only position the links horizontally,…
- Pobrania
- 195
- Polubienia
- 27
- Ocena
- 0
P
PrintablesKarlIRL
Skadis Battery Holder (AA)
IKEA Skadis holder for up to 15 AA batteries. Only the upper two hooks need support. For AAA version, see here - https://www.printables.com/model/1095315-skadis-battery-holder-aaa
- Pobrania
- 179
- Polubienia
- 16
- Ocena
- 5
P
Printablescodos
Bit-Set-Holder for IKEA Skadis Pegboard
Organize your Drillbits on your Skadis-Pegboard with this print for the common 10-bit-sets.
- Pobrania
- 174
- Polubienia
- 29
- Ocena
- 5
P
PrintablesAngel
Deburring tool holder for IKEA Skadis
I liked the idea of the deburring tool holder and the idea of 45 degree printing to avoid supports. So I designed my own holder using these ideas for my Skadis panels. Fits CGBOOM brand tool. Feel free to ask me to adapt this model if you…
- Pobrania
- 164
- Polubienia
- 11
- Ocena
- 4
P
Printablesbeanieboi
Unifi U6-Enterprise Skadis Holder
A holder for a Unifi Enterprise Access Point. Print settings: You need to add modifiers around the hooks. I added spherical modifiers with 100% infill. All other infills are at 15% supports needed The 3mf file should already include the…
- Pobrania
- 143
- Polubienia
- 23
- Ocena
- 5
P
PrintablesWegBier
Homematic 55mm Skadis Mount
A small adapter to get a 55mm HomematicIP thermostat, or any other HomematicIP 55mm device, attached to IKEA Skadis. The fit is not as tight as with the original one, could probably add additional spacing to the clips, but it holds it in…
- Pobrania
- 136
- Polubienia
- 15
- Ocena
- 4,33
P
PrintablesFeirno
Skadis AC Remote holder-Mitsubishi
simple remote Control holder for the Ikea Skadis wall perferct fit for the Mitsubishi remote.
- Pobrania
- 126
- Polubienia
- 4
- Ocena
- 4,5
P
PrintablesPenguinNinja
Skadis Boards Linker - Tighter Fit Remix (Magnetic version)
This is a remix of the Skadis Boards linker by Koprov that has thicker pegs to provide extra tight fit in the board's hole and imbedded magnets for light tools. The fit now is very tight. In addition to the original model where you could…
- Pobrania
- 121
- Polubienia
- 18
- Ocena
- 0
P
Printablesdick
Skadis T-Nut mount for Stanley Fatmax snap-off knife in 9mm
This is a mount for holding a Stanley Fatmax 9mm snap-off knife (model 0-10-475) on the IKEA Skadis board. It uses the Skadis T-Nuts mounting system from 6d6178 . You will need only one nut and the M2.5 hardware to attach it. I use an…
- Pobrania
- 115
- Polubienia
- 8
- Ocena
- 5
P
Printablesfivesixzero
Skadis Holder: Pinecil/TS100 Soldering Iron Tips (uses heat set inserts)
Simple Skadis holder for eight Pinecil or TS100 type soldering iron tips with bonus top pocket and tiny right-side oval slot for a bit of additional storage. Nice companion for mounting above the Skadis Pinecil holder/soldering station:…
- Pobrania
- 110
- Polubienia
- 35
- Ocena
- 3,5
P
PrintablesExtrude Dude
Knipex Wrench Pliers Holder for Skadis Board
Best to print with supports, though without supports should be fine too. Convenient to use: the left side wedge is kept fairly small, so the pliers can be “lifted” upwards of the holder, not just “pulled” towards you. No further parts…
- Pobrania
- 104
- Polubienia
- 13
- Ocena
- 5
P
Printablesdick
Skadis T-Nut mount for Klein Wire Cutter and Stripper
This is a mount for holding a Klein Wire Cutter and Stripper on the IKEA Skadis board. It uses the Skadis T-Nuts mounting system from 6d6178 . You will need two nuts and the M2.5 hardware to attach them. I use M2.5x16 screws. No supports…
- Pobrania
- 92
- Polubienia
- 8
- Ocena
- 4,67
P
PrintablesZAYn0nDER
IKEA Skadis Nintendo DS / DSi Game Holder
Tired of having no way to neatly store and Display your Nintendo DS / DSi Game Collection ? Then this easy Print is the solution for you. For the whole row you need 4x “DSGameStack” and 2x “DSGameStackshort” Or if you are using my Print…
- Pobrania
- 68
- Polubienia
- 10
- Ocena
- 0
P
PrintablesHoenir15
Hue Bridge holder/mount for Ikea Skadis
I redesigned the wall mount for a Philips hue bridge fitting on the IKEA skadis punchwall. I made the walls quite thicker (2mm) to get a more stiff structure. Furthermore I made the skadis hooks a little bit smaller, so they fit more…
- Pobrania
- 65
- Polubienia
- 6
- Ocena
- 0
P
PrintablesIgors Višņakovs
Wolfbox MF50 Skadis nozzle holder
Used for wolfbox mf50 to hold nozzles on skadis board Print with supports! I used 100% infill, 0.2mm, with grid style supports, takes about 2 hour on mk3s
- Pobrania
- 52
- Polubienia
- 7
- Ocena
- 4,5
P
PrintablesSebB
Prusa Spare sheet holder for IKEA SKADIS
Prusa Steel sheet holder for IKEA Skadis. Remix of a Remix, i only removed the MK3S writing on the lower right corner. Prints with supports Prints with MK4 Input shaper 0.20 Structural gcode and Prusa Slicer Project added Print on PEI…
- Pobrania
- 50
- Polubienia
- 11
- Ocena
- 5
P
PrintablesSeppel
Anker PowerCore+ 26800 PD holder for IKEA Skadis
This is a holder to attach an Anker PowerCore+ 26800 PD to an IKEA Skadis plate. Nothing very special about it. Printed it myself in PETG. 0.2mm layer height 0.4mm nozzle Filament used: https://amzn.to/3J4QhE3 - awesome material. Prints…
- Pobrania
- 49
- Polubienia
- 6
- Ocena
- 0
P
Printablesrhoen_bastel
SKADIS LEDBERG Lichtleisten Halterung
SKADIS (Lochraster) Halterung für die LEDBERG Lichtleiste von IKEA Habe die Schrauben verwendet die mitgeliefert waren. Link zur Lichtleiste: LEDBERG Lichtleiste, LED, bunt - IKEA Deutschland Druckzeit : ca. 2 Stunden // 10g Viel Spaß…
- Pobrania
- 48
- Polubienia
- 11
- Ocena
- 5
P
PrintablesHoenir15
HMIP Access Point mount for IKEA Skadis
Simple and fast to print mount for homematic IP Access Point suitable for IKEA Skadis punchwall. You can easily hang the holder in the Skadis wall and attach the HMIP AP with its mounting holes / drill holes. I printed on a high…
- Pobrania
- 42
- Polubienia
- 2
- Ocena
- 0
P
Printablestino14270
support ebavureur skadis ikea
comme d'autre model de mon compte petit support Ikea skadis pour ébavureur pratique et rapide a faire
- Pobrania
- 41
- Polubienia
- 11
- Ocena
- 0
P
PrintablesSlastin
Skadis Halter für Modelco.fr Schraubendreherset / Skadis holder for Modelco.fr screwdriver set
Skadis Halter für Modelco.fr Schraubendreherset, anpassbar für andere Durchmesser. Als Haken wurden Standarthaken für das Skadispegboard verwendet. Skadis holder for Modelco.fr screwdriver set, adaptable for other diameters. Standard…
- Pobrania
- 39
- Polubienia
- 10
- Ocena
- 0
P
PrintablesRoman Gischig
iPhone6_mount for IKEA Skadis
iPhone6_mount for IKEA Skadis. the phone has a small cover/bumper, so you might need to adjust the width.
- Pobrania
- 36
- Polubienia
- 7
- Ocena
- 0
P
Printablesjirom
Skadis Badminton String Reel Holder
Mount a reel of badminton strings to an Ikea Skadis board. Printing Instructions A complete set of this model requires: 1 print of the reel holder 2 prints of the lock clip No supports needed for printing. I used PETG for my prints but…
- Pobrania
- 33
- Polubienia
- 4
- Ocena
- 0
P
Printablesdick
Skadis T-Nut mount for Molex Hand Crimp Tool
This is a mount for holding a Molex Hand Crimp Tool on the IKEA Skadis board. It uses the Skadis T-Nuts mounting system from 6d6178 . You will need two nuts and the M2.5 hardware to attach them. I use M2.5x16 screws. No supports are…
- Pobrania
- 30
- Polubienia
- 5
- Ocena
- 0
P
Printablestino14270
support outillage skadis Ikea
support skadis pour ranger tous plein de petit matériel
- Pobrania
- 21
- Polubienia
- 4
- Ocena
- 0
P
Printablesmznflo
Skadis battery holder / dispenser for LR1130 and CR2032
A battery dispenser for the IKEA Skadis board. It holds both small LR1130 and bigger CR2032 batteries. Possible improvments: Currently it's a bit tricky to get out one battery - especially the small ones. Maybe an angled lip that pops out…
- Pobrania
- 20
- Polubienia
- 6
- Ocena
- 0
P
Printablesxs-society
LED Lenser P7R Skadis Floating Holder
Thanks @dtphantom and @DavyGD
- Pobrania
- 19
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPietke
Beet Sign Radischen
This is a sign for your plants in the garden.
- Pobrania
- 18
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMilan Stehlík
Skadis Ikea - MADMONQ holder
Tisk z PLA, 0,2mm, podpěry organické jen na tiskovém plátu.
- Pobrania
- 15
- Polubienia
- 4
- Ocena
- 0
P
PrintablesOrbCorp
IKEA Skadis Holder for LTT Screwdriver Bitcase
Wanted to keep my LTT Bitcase organized next to my screwdriver so I designed this small holder for the IKEA Skadis wall. It should fit all sizes of the bitcase but I havent tried the smallest one for 12 bits but it should be enough…
- Pobrania
- 14
- Polubienia
- 4
- Ocena
- 0
P
PrintablesMikkel Jarlund
SONOFF ZBDongle-E Skadis Mount
Skadis mount for the Sonoff Zigbee Dongle E. Printed using organic supports.
- Pobrania
- 14
- Polubienia
- 0
- Ocena
- 0
P
PrintablesCrackerJack
Ikea Skadis Narrow Screwdriver Mount
I loved the original model but the screwdrivers would sometimes lift the print from the Skadis pegboard. After lifting from the Skadis I would of course go to push the holder back in and then the hook would snap off. This remix uses the…
- Pobrania
- 12
- Polubienia
- 4
- Ocena
- 0
P
PrintablesFerago Soluciones 3D
SOPORTE GAFAS SKADIS
En base a un escaneo de la nariz de un conocido, he modificado el diseño para crear un hueco para las patas de las gafas y añadido los ganchos para colgar el soporte en el sistema Skadis de IKEA. Impreso en una Core ONE+ usando Prusament…
- Pobrania
- 9
- Polubienia
- 7
- Ocena
- 0
P
PrintablesPrintuin
Skadis Mount Collection
First part of my skadis collection. Mainly mounts for printer tools. I will upload more over time. Comment if you have optimization ideas or change requests. The files for the kitchen roll holder are here . Most created by myself, but…
- Pobrania
- 42 853
- Polubienia
- 15 746
- Ocena
- 4,81
P
PrintablesJohination
IKEA Skadis
Remix mit Bohrlöcher für Wandmontage
- Pobrania
- 33 136
- Polubienia
- 4553
- Ocena
- 4,75
P
PrintablesLine Arc Line
Skadis T-Clip System
I have been fascinated recently by the ways that the 3D printing community has devised to attach printed parts to IKEA Skadis board. Skadis slots enable 3D-printed parts to attach much more securely and reliably than the holes in regular…
- Pobrania
- 25 575
- Polubienia
- 3461
- Ocena
- 4,99
P
Printablessdgsean
Ikea Skadis Shelf / Tray
Different sized shelves / trays for your Ikea Skadis wall. 1 Extra Long or 2 Extra small shelves will fully span a 36cm wide panel. (The Extra Long may be beyond most printer beds). To get the 2 Extra Smalls to span the distance, you'll…
- Pobrania
- 19 516
- Polubienia
- 3626
- Ocena
- 4,9
P
Printables6d6178
Skadis T-Nuts Mounting System for Ikea Skadis Pegboards
These are T-Nuts for IKEA SKÅDIS pegboards that make installing accessories on your pegboard much easier . You no longer have to design custom mounting hooks into your part. All you need is holes and alignment guides. The T-Nuts come in…
- Pobrania
- 16 087
- Polubienia
- 3533
- Ocena
- 4,93
P
PrintablesLine Arc Line
Parametric SKADIS Board Generator
I saw a few models on here for printable SKADIS pegboard and I love the idea. However, many of the models were dimensioned wrong for my printer or intended purpose. I decided to make a simple to edit, parametric file for generating…
- Pobrania
- 14 367
- Polubienia
- 2814
- Ocena
- 4,96
P
PrintablesKim-Janosch
Skadis/ SKÅDIS universal peg
UNIVERSAL PEG FOR IKEA SKÅDIS – one peg for my whole organizer system This peg is the mounting system for all my SKÅDIS holders and organizers. The holders are designed around it, so they print without supports and their entire back sits…
- Pobrania
- 13 991
- Polubienia
- 1092
- Ocena
- 4,86
P
PrintablesKilian
IKEA SKÅDIS / SKADIS Hooks
These are hooks for the IKEA SKÅDIS boards. Unlike others I have seen these are made to snap in to the board and won't come loose or wiggle around. I am making models with different hook lengths available here, from 10 mm to 50 mm in 5 mm…
- Pobrania
- 12 806
- Polubienia
- 2326
- Ocena
- 4,89
P
PrintablesJonasTae
IKEA Skadis Wall Mount
Screw: diameter: up to 6mm length: 30mm or more
- Pobrania
- 12 349
- Polubienia
- 2998
- Ocena
- 4,96
P
PrintablesJonas Pedrotti
Skadis Tool Mount Collection
This is a collection of tool holders, where the focus lies on quick access. Almost all prints can be printed without supports. I will add more tool mounts in the future and update them here. Latest Update: 10.08.21 A few models are…
- Pobrania
- 12 343
- Polubienia
- 2778
- Ocena
- 4,78
P
PrintablesClay2F
IKEA Skadis
EN: Since I wanted to construct various holders and test them before printing, I created the hole pattern of the Skadis walls from Ikea as a step file. DE: Da ich mir diverse Halter konstruieren und vor dem Druck prüfen wollte, habe ich…
- Pobrania
- 12 025
- Polubienia
- 1662
- Ocena
- 4,91
P
PrintablesFabber
IKEA Skadis Hook
Description A hook designed for the IKEA skadis pegboard. Perfect for keys, face masks and other small things to hang up. You can scale the width of the hook up or down to get a tighter or looser fit with the pegboard. Parameter: 0.2 mm…
- Pobrania
- 10 646
- Polubienia
- 1443
- Ocena
- 4,88
P
Printablesgimpelginster
Modular Skadis Container System (S)
These are some small skadis containers in different lengths. One container is one solid part. Neither do they require any separate hooks nor supports while printing. If you need some more space, you could print the Modular Skadis…
- Pobrania
- 10 325
- Polubienia
- 3811
- Ocena
- 4,93
P
Printablessdgsean
Ikea Skadis Bin
Different sized bins for your Ikea Skadis wall in Small, Medium and Long. The small closely resembles the size of the stock bin from Ikea, the Medium and Long are roughly 2x and 3x wide, respectively. I printed mine with a 0.6mm nozzle…
- Pobrania
- 10 085
- Polubienia
- 1842
- Ocena
- 4,91
P
Printablesalecs.form
Filament Spool Holder for IKEA SKADIS
This set of holders for filament spools can be mounted to the popular IKEA SKADIS pegboard. In order to hold one spool there are always a left and a right part which belong together. By selecting the appropiate distance (=holes) between…
- Pobrania
- 9963
- Polubienia
- 5213
- Ocena
- 4,84
P
PrintablesPavel
IKEA SKADIS hook collection - kolekce háčků
Collection of hooks for IKEA SKADIS board - slightly reinforced thickness and tight fit. Hooks from 15 to 65mm Kolekce háčků pro IKEA SKADIS desku - lehce zesílené a pevně padnoucí. Háčky délky 15-65 mm Print instructions No supports…
- Pobrania
- 8612
- Polubienia
- 1113
- Ocena
- 4,63
P
PrintablesSoarpix
IKEA skadis/SKÅDIS accessories PACK
IKEA skadis/SKÅDIS accessories PACK This is my skådis accessories, hooks and holders. I use dual pegs because I want the hooks and holders to sit firmly on the pegboard and don't move around when I take a tool. I have separated the peg…
- Pobrania
- 8396
- Polubienia
- 2173
- Ocena
- 4,87
P
PrintablesIvan Urbánek
Skadis continuous shelf
Shelf for Ikea Skadis board that can be assembled into continuous row and uses relatively small amount of filament. Printing Print without supports, take care not to place the bracket on the print-bed with the hooks overhanging. Assembly…
- Pobrania
- 7934
- Polubienia
- 1704
- Ocena
- 4,96
P
PrintablesLayerCake
IKEA Skadis Headphone Holder
Update 2023-04-30 Now updated to not require any screws everything just snaps together. Old version still available if you prefer it. Original Description Universal headphone holder for use with IKEA Skadis pegboard. 4 hooks for maximum…
- Pobrania
- 7596
- Polubienia
- 1212
- Ocena
- 4,97
P
PrintablesRobert G
Skadis Pegboard, all sizes 80 to 360mm
Tired of being limited to IKEA’s fixed SKÅDIS sizes? Here’s the print your own version: fully parametric, resizable, wall-ready. Pick any size you want, 80 mm to 360 mm included Standard 20 mm spacers stand-off Countersunk mounting screw…
- Pobrania
- 7474
- Polubienia
- 2229
- Ocena
- 5
P
PrintablesKim-Janosch
IKEA SKADIS Caliper Holder
Your digital caliper safe on the wall instead of loose in a drawer. A caliper holder for IKEA SKADIS pegboards. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports. Features…
- Pobrania
- 7339
- Polubienia
- 954
- Ocena
- 4,85
P
PrintablesSMACKMAX_
Skadis Pockets / Bins / Tool holder
Consider following me on Instagram (@SMACKMAX_). I try to post all of my projects to build a portfolio of my projects. https://www.instagram.com/smackmax_ Here i present SKADIS Pockets / Bins / Shelves: Modular - No Support - Very sturdy…
- Pobrania
- 7279
- Polubienia
- 3395
- Ocena
- 5
P
PrintablesPavel
IKEA Skadis screwdriver holder / držák na šroubováky
Updated modified design - big “groove” added on top side, so scredrivers sit in it and cant fall off when accidentaly hit. Universal comb type holder for various tools. Comes in two sizes for bigger and smaller tools. Big - 5 cut outs for…
- Pobrania
- 7220
- Polubienia
- 1127
- Ocena
- 4,94
P
PrintablesMacmade
IKEA Skadis Hook
Preview: https://a360.co/3JpVfL6
- Pobrania
- 7005
- Polubienia
- 1201
- Ocena
- 4,98
P
PrintablesScottw86
Skadis Storage Bins
Small storage bins 80mm wide for Ikea Skadis. Supports are required for the hooks. Normal version uses about 25g of filament, Beefy version uses around 34g. Edit 8/7/23, added a “Beefy” version with slightly thicker walls for heavier…
- Pobrania
- 6842
- Polubienia
- 1522
- Ocena
- 4,86
P
PrintablesBN3D
Low-Profile Ikea Skadis Stand
This is a simple easy to print design to convert an Ikea Skadis into a freestanding pegboard. The feet attach to the board using the supplied Ikea hardware. I've uploaded two designs: one with space for an M4 hex nut, and another which…
- Pobrania
- 6819
- Polubienia
- 1599
- Ocena
- 4,91
P
PrintablesRod
IKEA Skadis Fusion 360 Models
Update 2023-09-17 Quad stl and Fusion 360 file updated with correct ‘Quad’ dimesions. Thanks to Evolver for catching this. Update 2023-08-31 New models (R2) have replaced the original models. The new models install easier in the Skadis…
- Pobrania
- 6795
- Polubienia
- 757
- Ocena
- 4,73
P
PrintablesBouli
Ikea SKÅDIS (Skadis) board connect
When I bought a set of 6 Ikea SKÅDIS boards and was putting them up on the wall I wanted something to allign them perfectly. So I took my calipers, took some measurements and opend fusion 360. First I made the “mini”s so the boards could…
- Pobrania
- 6539
- Polubienia
- 2711
- Ocena
- 4,91
P
PrintablesMAQUINA
IKEA SKADIS PEGBOARD 200X200MM / 360X360MM
3D MODEL DESCRIPTION Since the space of my desk getting lesser and lesser… so I have think of a effective way to re-organise all the tools and other stuffs… Pegboard is a fancy way to keep the things organised as we can mix’n’match the…
- Pobrania
- 6278
- Polubienia
- 695
- Ocena
- 4,71
P
PrintablesORM
Skadis T-nut mounting system, threaded for M3 or UNC #5-40 screws.
Use the Skadis T-nut to mount different accessories to the IKEA Skådis board. The accessory will be firmly attached to the board and will not come loose when used, as can happen with conventional hooks. Is the threaded T-nut strong…
- Pobrania
- 6249
- Polubienia
- 753
- Ocena
- 4,84
P
PrintablesPointNemo
Skadis Storage Box
21 different storage boxes for IKEA Skadis: 1 case, 160 x 40, 160 x 60, 160 x 80 mm, height: 20 mm 2 cases, 80 x 40 mm, heights: 20, 40, 60 and 80 mm 3 cases, 120 x 40 mm, heights: 20, 40, 60 and 80 mm 4 cases, 160 x 40 mm, heights: 20,…
- Pobrania
- 6024
- Polubienia
- 1117
- Ocena
- 4,97
P
PrintablesGamano_CZ
IKEA Skadis + v2 + v3 + v4
Rasters: 200x200 / 200x100 / 100x200 / 100x100 / grips
- Pobrania
- 5524
- Polubienia
- 874
- Ocena
- 4,94
P
PrintablesHellweaver666
PS5 DualSense Controller Holder for Ikea Skadis
Super simple model that I made by hacking together two other models from Thingiverse namely this PS5 controller stand and this Skadis hook . Aside from bodging the two together in Tinkercad I flattened the sides so that the model can…
- Pobrania
- 5521
- Polubienia
- 661
- Ocena
- 4,84
P
PrintablesPrintuin
Skadis Drippy Bucket
This is a remix for ikea skadis. You can choose between the diffrent inlays to organice your pens or something else. I have an extensive skadis collection, you can find it here. All parts print and fit together well in PLA at 0.2 mm layer…
- Pobrania
- 5513
- Polubienia
- 1705
- Ocena
- 4,96
P
Printablescourroux
Screwdriver Holder Skadis
The 5 holders "tight" version is the most space effective. If you want more space in between, then the other versions are c.t.c. 40 mm like the holes in the Skadis board.
- Pobrania
- 5494
- Polubienia
- 805
- Ocena
- 4,9
P
Printablesnerd_merdules
IKEA SKADIS headphone hanger
New Sizes!! Hang your "cans" (do people call headphones cans anymore?) on your SKÅDIS pegboard (Article Number: 903.471.72, etc). 2 new variants added with headband width in the filename: 28 mm headband 48 mm headband (the original was…
- Pobrania
- 5434
- Polubienia
- 725
- Ocena
- 4,78
P
Printablestchoupshop
Skadis T-Clip System - Low Profile Flush Mount Clips
These are an alternative clip for @LineArcLine's excellent Skadis T-Clip System. This version shortens the clip so that it does not protrude beyond its mounting recess and will not interfere with anything in front of it. Both painted and…
- Pobrania
- 5314
- Polubienia
- 442
- Ocena
- 4,97
P
Printablesari.mandjelikian
Ikea Skadis Hook Stabilised multiple sizes Customisable
UPDATES: 2023-01-19: Added the option to change the total height of the hook and save space. The parameters will automatically calculate home many vertical hooks are needed. The hook is placed at lower ¼ of height. 2022-10-14: Fixed the…
- Pobrania
- 5280
- Polubienia
- 806
- Ocena
- 4,96
P
PrintablesEarthworm_Jon
Gridfinity x Skadis Frames
Extension to the awesome Gridfinity project by Zack Freedman. This model allows you to mount a Gridfinity baseplate frame to your Ikea Skadis. If you have trouble with bed adhesion for the pegs, use a brim to keep them in place.…
- Pobrania
- 5280
- Polubienia
- 1376
- Ocena
- 4,86
P
PrintablesIvan Urbánek
Skadis holder for pliers
Simple, space efficient Skadis holder for pliers inspired by IKEA Skadis pliers holder (up to 8) by Kai . It doesn't use anything from the original model except the idea, but the idea is a good one. There are 2 versions with different…
- Pobrania
- 5257
- Polubienia
- 857
- Ocena
- 4,93
P
PrintablesSergej
Skadis Box collection
🌟 Discover the Ultimate Storage Solution with SKÅDIS box collection! 🌟 Say hello to an organized life with our premium SKÅDIS storage boxes! Crafted with versatility in mind, our range of boxes comes in sizes of 75mm, 115mm, 155mm, and…
- Pobrania
- 5222
- Polubienia
- 2495
- Ocena
- 5
P
PrintablesLayerCake
IKEA Skadis Xbox One Controller Holder With Lip
Update 2023-04-30 Now updated to not require any screws everything just snaps together. Old version still available if you prefer it. Original Description Remix of my Xbox One controller holder for use with IKEA Skadis pegboard with an…
- Pobrania
- 5204
- Polubienia
- 826
- Ocena
- 4,97
P
Printablessalsaia
Skadis Milk Crate
I created this remix so you can put a milk crate on your Skadis pegboard. There is an option with a solid bottom (smaller things won't falling through) and an option with a traditional bottom. The crate is 3.4in x 3.8in x 3in. Supports…
- Pobrania
- 5160
- Polubienia
- 1405
- Ocena
- 4,61
P
PrintablesKim-Janosch
IKEA SKADIS Containers – 18 Sizes
Pick the size that fits: storage containers in 18 sizes for IKEA SKADIS pegboards. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports. Features 18 sizes For cable ties, pens, small…
- Pobrania
- 5149
- Polubienia
- 831
- Ocena
- 4,93
P
PrintablesBicyclerepairGM
Skadis
little size adjustment so that it fits the printplate of the Prusa MK4
- Pobrania
- 5041
- Polubienia
- 616
- Ocena
- 4,86
P
Printablesalecs.form
Tray for IKEA SKADIS
This set of trays can be mounted to the popular IKEA SKADIS pegboard. There are three sizes available: 120mm 260mm 300mm There are also two variants available, one has a solid bottom, the other one is open (hex pattern). Due to the…
- Pobrania
- 4610
- Polubienia
- 1410
- Ocena
- 4,87
P
Printablescourroux
Skadis Tape Hooks
Tape hangers/hooks for the IKEA Skadis pegboard.
- Pobrania
- 4584
- Polubienia
- 822
- Ocena
- 5
P
Printableschrisb
DIY Skadis pattern Pegbord and Inserts (dxf lasercut file incl.)
3D print or lasercut pegboard and insert base. you can also use the insert baseplates as universal mount to glue or screw on already existing original tool holders like bit holders, drill sets and stuff. the insert base is designed for a…
- Pobrania
- 4537
- Polubienia
- 259
- Ocena
- 5
P
PrintablesGabC
IKEA Skadis small tray
These small trays require the use of two pieces of my universal peg plate . You can design your own pegs if you want to use on another type of board and reuse the trays. A few different sizes will be added from time to time so keep an eye…
- Pobrania
- 4406
- Polubienia
- 1288
- Ocena
- 4,77