5909 modeli
Intro Earbuds Cleaning Tool V2 is a small, easy-to-print earwax remover tool for in-ear headphones and earbuds . It helps you safely remove earwax, dust and debris from your earbuds without damaging the speaker mesh . The first version…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
Since this stand is pretty big I split it into two pieces which can be printed together on one plate on the Prusa i3 MK3S. The print does not need any supports when printed as setup in the “Headphone Stand Split Complete.3mf” file or if…
Wydruk około 6,75 €–8,25 € nettoWstępna wycena jednego wariantu
Wasn't too impressed with the selection of headphone clamp holders here on Thingiverse, so decided to make my own version. This design uses a moveable clamp protector located at the end of the tightening bolt so that when you do tighten…
Wydruk około 1,33 €–1,62 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) Supports needed (use tree supports, build plate only) Scale it as you like :)
Wydruk około 18,09 €–22,11 € nettoWstępna wycena jednego wariantu
The Desk Headphones Hanger is a handy accessory that allows you to keep your headphones organized and within easy reach. This model is designed to be mounted to a horizontal desk up to 22 mm thick . It features a simple and elegant design…
Wydruk około 0,43 €–0,52 € nettoWstępna wycena jednego wariantu
I wanted to remove the radius overhangs on the print but realised the original STEP files were exports of the STL so I've exported clean STEP files as well as made my minor tweaks. Thread was changed to GL20 thread to hopefully improve…
Wydruk około 4,16 €–5,08 € nettoWstępna wycena jednego wariantu
UPDATE - 3-15-2023 This case is meant to be a little loose in order to protect your expensive in-ear monitors or earbuds from getting tossed around or wound tightly which can add wear and tear and strain cables over time. BUT i always…
Wydruk około 4,39 €–5,37 € nettoWstępna wycena jednego wariantu
Check the hight of your headphone before printing this! You want your stand be some cm higher then your headphones. Feel free to give me a tip if you like it! :)
Wydruk około 31,20 €–38,13 € nettoWstępna wycena jednego wariantu
Want to have a cool place to put your headphone? Print yourself this nice retro item! All parts are seperated so you won't need a MMU, just print them in your desired colors. Assembly is pretty straight forward, just put all pieces…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
The Bookshelf Mountable Headphones Hanger is a handy accessory that allows you to keep your headphones organized and within easy reach. This model is designed to be mounted to a bookshelfs vertical stands ranging from 18 mm thick up to…
Wydruk około 0,43 €–0,52 € nettoWstępna wycena jednego wariantu
Works great for headphones or for a lot of other things. The hole is 5mm [~.20in] and the counterbore 10mm [~.40in]. Works great with a 4mm screw or a #6 - #10 screw. This is a spin-off of my Cubicle Headphone Hook . I found I really…
Wydruk około 0,92 €–1,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is my original design for Miniature Over-Ear Headphones , specifically scaled to be the perfect accessory for collectible figures like Labubu, Pop Mart, and other 1/12-scale art toys . The unique print-in-place construction means no…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena jednego wariantu
Deadpool : Wrexham FC Should have given him some cleats. Feel free to accessorize and share.
Wydruk około 7,71 €–9,43 € nettoWstępna wycena jednego wariantu
I needed this remix for my wife :) She hated cable position being clipped without a chance to move (as it is tighten in the original from Ben G. [thanks for the design!]) So here: the cable is going inside, where the t-shirt is being…
Wydruk około 0,10 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Organize your headphones, controller and charging cables with this unique stand featuring a built-in drawer for a clutter-free experience. Make sure to check out my matching stand for PS5 games:…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
A charging mount for the Shokz Opencomm/Opencomm2 headphones. The original charging cable fits securely in the mount and gives a flat surface to mount using double-sided tape or 3M Command Strip. Allows the charger to be hidden behind a…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hang something off a table. Designed for YETI Rambler or similar water bottle lid, but it'll work for anything that size – headphones, purse strap, etc. My first version uploaded puts the screw on top of the table. A newer version puts…
Wydruk około 2,92 €–3,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
the screw works fine, its a bit smaller so the worse 3D printers still have a chance to print it well. holds strong , didnt fall at all, looks clean , has a little stop to hold the headphones better so they dont fall off. I prepared the…
Wydruk około 2,95 €–3,61 € nettoWstępna wycena jednego wariantu
Deadpool Head Original Version https://www.printables.com/model/350015-life-sized-deadpool-head-just-the-tip Deadpool Head Angry Version https://www.printables.com/model/350043-life-sized-deadpool-head-angry-version This version:
Wydruk około 25,22 €–30,83 € nettoWstępna wycena jednego wariantu
Hi everyone! I was very underwhelmed from the default Quest 3 Audio. Firstly I went with the DAS Mod, but found the strap to be uncomfortable, especially with glasses. I decided to modify my KOSS Porta Pro headphones and make them fit to…
Wydruk około 0,37 €–0,46 € nettoWstępna wycena jednego wariantu
A simple and stable desk stand for headphones. If you like the model, please give it a like. ❤ Jednoduchý a stabilní stolní stojánek na sluchátka. Pokud se vám model líbí, dejte mu prosím lajk. ❤
Wydruk około 5,36 €–6,55 € nettoWstępna wycena jednego wariantu
Story behind model For years, the KOSS PORTA PRO headphones have been my enduring musical companion. Their timeless design continues to deliver an exceptional audio experience that never fades. Recently, upon repurchasing this immortal…
Wydruk około 4,48 €–5,48 € nettoWstępna wycena jednego wariantu
Did you ever find yourself debating whether to buy headphones with proper noise cancelling or headphones with good cat ears support? No need to choose anymore! Now you can have state of the art noise cancelling AND superb cat ears! With…
Wydruk około 2,45 €–3,00 € nettoWstępna wycena jednego wariantu
Headphone holder with a custom hook for the Ikea Mosslanda shelf. The shelf lip is ~12.7mm (~½ Inches), to fit snuggly, I designed the clip to be 12.65mm. There are multiple variants for different headphones sizes: Very large: fits…
Wydruk około 2,40 €–2,93 € nettoWstępna wycena jednego wariantu
Quick headphone hanger designed specifically for Uplift Desks (25mm thick) Buy me a coffee :) - Thangs - Thingiverse
Wydruk około 1,74 €–2,13 € nettoWstępna wycena jednego wariantu
should fit any standart Headset and the standart Ivar shelf
Wydruk około 1,09 €–1,33 € nettoWstępna wycena jednego wariantu
This is a simple replacement arm i built for my wireless Skullcandy Crusher Evo headphones. the mod is very easy to install, just pop the old arms out with a screwdriver and the new ones should fit in just fine, it goes in the same way…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
Under desk mount for FiiO headphone amplifier (E10K, E10K-TC, etc). A tab allows the amp to be retained in place, but still easily removed when desired. All of the amp's ports and controls remain accessible when the device is mounted.
Wydruk około 2,00 €–2,45 € nettoWstępna wycena jednego wariantu
I have a custom desk in my office built on an Uplift adjustable frame. This headphone holder should work on standard Uplift desks as well. I designed to fit my two needs, the Apple AirPods Max that I use for work and recreational…
Wydruk około 5,26 €–6,43 € nettoWstępna wycena jednego wariantu
As I heard about the contest, I thought my other design (Webcam Cover) would fit perfectly into this category. unfortunately I had already published it shortly before the contest begun so I could not use it for the contest. Today I was…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
Deadpool riding a Unicow and it's a desk organizer!!! Three part print; main part is three colour - please see included PDF for very important additional info. Print all three parts and glue carefully together. Please hit the like ♥and…
Wydruk około 0,74 €–0,91 € nettoWstępna wycena jednego wariantu
A small tab that clips onto the psa1 microphone holder to put your headphones on.
Wydruk około 0,56 €–0,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A box for wired headphones that prevents tangled wires. Krabička na drátová sluchátka, která zabrání zamotání drátů.
Wydruk około 1,68 €–2,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple, easy-to-print desk-mounted snap hook. The original design is built for a 3cm desk, but you can change this directly in the slicer. The simple design snaps right onto the desk and has an option for padding if you are worried…
Wydruk około 0,67 €–0,81 € nettoWstępna wycena jednego wariantu
Couldn't find one which fit the 240EB so here's a quick and dirty one. Friction fits close enough to stay in place and only contacts the printed part in small areas too keep cooling from being impaired. Use something other than PLA since…
Wydruk około 1,50 €–1,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed a hook for my wireless headphones to hang on the side of my monitor. The blacked out area is only 9mm wide and just hanging them on the side blocks the top of the screen. I printed this in PLA and this is modification number 4. I…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
My ear cushion from my Marshall Major III was very used. So I make an adapter for use a ear cushion from a Marshall Monitor II that I had. It's printed with my prusa MK3S+ in 0.2 mm and with organics supports everywhere. I have recycled…
Wydruk około 1,64 €–2,00 € nettoWstępna wycena jednego wariantu
Dust cover for the Drop Sennheiser HD58x Jubilee and Drop Sennheider HD6xx. If you have slightly smaller or larger pads/cushions but with the same shape, you can simply adjust the size in you slicer. The cover was measured with new and…
Wydruk około 2,10 €–2,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I had been looking for a way to mount my headphones to the side of my Uplift desk. There are lots of options that clamp to the desktop, or screw into the bottom, but I didn't want to permanently alter the desk. There are steel rails along…
Wydruk około 1,07 €–1,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Imported from Thingiverse: https://www.thingiverse.com/thing:4299784 This is a cable organizer and a headphone holder all in one. It splits in two to allow for wrapping a longer cable or hanging two objects. This thing is designed to be…
Wydruk około 3,46 €–4,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print instructions: Material: PETG Layer: 0,2 mm Perimeters: 2 Infill: 15% Infill Pattern: Grid Supports: No, Brim: No This model does not require any special settings, more details in the attached 3MF file. Part list: Printed part Bolt…
Wydruk około 3,61 €–4,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Llavero Deadpoll
Wydruk około 0,34 €–0,41 € nettoWstępna wycena jednego wariantu
Printed in two parts First attach main part to wall, then insert second part into holes ====================================================================== Hello, I have updated this model. Instead of two holes a third was added for…
Wydruk około 1,74 €–2,12 € nettoWstępna wycena jednego wariantu
For a friend's wedding, I created original cufflinks that no one else will have that day. Some of the wedding guests were chosen to wear a secret MCU reference and I just couldn't find my old cufflinks at home. Hence this choice. For…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
This is a remix of the excellent model by JYC_RS. I printed this a while ago but was never happy with the overall stability. So I added some weight pockets to the base. The new version is visually identical, while the total mass increased…
Wydruk około 10,21 €–12,48 € nettoWstępna wycena jednego wariantu
I wanted a solid mount for my Insta360 Go 2. The base screws into the existing front cage mounting bolts and takes a small zip tie in the front to fully secure it down. The bolt hole is for a standard m2 screw and the nut should recess in…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
Headphone stand with cable holder and Dimebag lithography
Wydruk około 1,00 €–1,23 € nettoWstępna wycena jednego wariantu
Recommended print settings: Material: PLA/PETG Layer Height: 0.15 mm or less Infill % : 50+ Supports: Yes Print Orientation: Default as modeled
Wydruk około 1,73 €–2,11 € nettoWstępna wycena jednego wariantu
This nut is an addition to the previous model, and is compatible with previous designs. Features: Increases clamping area Allows for compatibility with thinner wall Retains the threaded screw Recommended print settings: Layer Height: 0.2…
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
A simple, easy to print, reliable spacer bracket for Ikea Alex Desks. I needed to add a headphone hanger to the leg of the Ikea Alex desk, but the thin legs proved to be too narrow for the hanger brackets. As such, I designed this model…
Wydruk około 1,96 €–2,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Needed a proper angled mount to store and display my headphones. I meassured out the angle of my ceiling (see picture) and designed a sturdy 3 part ceiling mount. There are spacers in the back, for my wall/ceiling I designed the spacer to…
Wydruk około 3,14 €–3,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
✔ For more sculpts like this, and if you are able to support my artwork, take a look at my Patreon :) This has become one of my most popular prints, and is a “remaster” of one of my older Deadpool sculpts, that now requires no supports!
Headphone Stand by MakerBot - Thingiverse
A remix of mistertech's headphone holder with a reversed cord holder. Works on desks up to 40mm thick.
lumo · headphone stand modern minimalist headphone stand assembly important · make sure that: your filament is dry so that it deals appropriately with the tolerances your build plate is properly clean so that there aren't adhesions issues…
Inspired by nature's powerful rhythms and ever-changing dynamic beauty, this headphone stand is my abstract interpretation of the power of "waves" and "Onami". The form draws from the sweeping power curves of crashing waves, translated…
Simple but beautiful design headphone stand in two versions. (Long and shorter version) Print Settings: Layer Height - 0.2 Infill - 15% Walls - 2 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock…
headphone stand · reDesk modern minimalist headphone stand with grid patterns the base screws into the threaded stand, the tolerances are tight, so be mindful and patient and you'll be able to tighten it right into position , and will…
Check out this Spider-Man headphone stand! 🕸 It's the perfect way to keep your desk organized and show off your favorite superhero. I'd appreciate a Like if you enjoy my work! Don't forget to visit my profile for many more cool 3D prints…
Headphone holder for M4 countersunk screws Model without holes https://www.prusaprinters.org/prints/16725-headphone-holder Bigger version https://www.prusaprinters.org/de/prints/43493-headphone-holder-big
A headphone holder with a screw for tightening it to the desk. There is a version with and without a hook. The main purpose was a place to store a seperate microphone and help with cables. Hooked version needs supports on buildplate.…
Two minimalistic headphone stand designs. Both designs come in two variants, one for smaller printers where the base is detached and a full one.
Soporte para auriculares ajustable en altura No requiere ningún tornillo para su montaje, es todo impreso en 3D. Archivos 3mf incluidos, preparados en Prusaslicer y Bambustudio. La placa es personalizable. En los archivos encontrarás una…
headphone holder / headphone stand Printable without support
Update 2023-04-30 Now updated to not require any screws everything just snaps together. Old version still available if you prefer it. Original Description Universal headphone holder for use with IKEA Skadis pegboard. 4 hooks for maximum…
This unique Batman headphones stand is a perfect accessory for fans of the Dark Knight. The Batman inspired design makes the stand not only practical but also a stylish addition to any desk. It keeps your headphones safe, organized, and…
UPDATE 28JAN2018: I have added a "WIDE" version that can accommodate headphone headbands up to 55mm wide. The original model accommodates headphone headbands to 45mm wide. UPDATE: The "Long" version of the screw could grip on to a 1mm…
headphone & headset holder / stand The bottom is hollow, if you want to put something heavy in there like sand.
A simple but characteristinc design for a modern headphone or headset stand. Great to display or rest your device on your desk. Best to print in - no special settings required, standard print settings are just fine Happy printing!
This is a model I've designed myself. As the model is not behind a paywall, support is appreciated! https://www.buymeacoffee.com/Tridense Strong and practical under-desk headphone hanger Zip tie your headphone cable to the hanger for…
New Sizes!! Hang your "cans" (do people call headphones cans anymore?) on your SKÅDIS pegboard (Article Number: 903.471.72, etc). 2 new variants added with headband width in the filename: 28 mm headband 48 mm headband (the original was…
Harry Potter Headphone Stand Would make a great gift Easy to print, slots together. Use supports for the top Stands just over 20cm tall UPDATE: I have updated the top file to a thickened version that is easier to slice. The original…
Christmas ornament by Vlado Turek Print instructions Comeplete Christmas ormanent collection that we have prepared for you. Jo Prusa Deadpool Stormtrooper Cthulhu Jack Skellington Alien Krampus Grinch Optimalized for SLA resin printer…
Intro I have originally setup a Bambu Studio project file that has everything laid out, however, if you're not using Bambu Studio or it's printers, please refer to this image for layout, printing orientation, number of parts needed, etc.…
The file contains 2 plates, one with the head and another with the molds for eyes, the head is only one piece for easier assembly. The white part inside the eyes is a piece of fabric mesh that I bought and glued inside * Updated model,…
Modernly designed holder for headphones with clear, minimalist shapes. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧 Includes STL +…
18. Feb. 2024, V1.3: Mask v 1.1 for easier printing Slightly thicker walls More space between the eyes, so it can be printed more beautifully 11. Feb. 2024 V1.2: Deadpool buckle added 27. Dec. 2023: The holsters and armed hands have been…
This one-of-a-kind Deadpool headphones stand is the ultimate accessory for fans of the Merc with a Mouth. Taking the form of Deadpool's iconic mask, this stand is rendered in a sleek, all-black design that makes it a sophisticated and…
needed a quick solution to get headphones off of monitors. BOOM! move it slightly to the right. (or left if you mirror it :) My headphones have a 30mm headband, so that's what this one is made for. [find enclosed the f3d file for…
Headphone holder With screw holes https://www.prusaprinters.org/prints/15235-headphone-holder
Can be printed in any material on a printer with sufficently tight tolerances without supports. The screw needs some inital force to start turning well. If your printer tolerances are too loose, consider scaling the screw slightly.
Simple under-desk headphone holder. Uses minimal material and is easy to attach with screws. Fits up to 30mm wide headbands. Print instructions: 3 perimeters Detect thin walls
Subscribe to find out more support free 4K Time-lapse video: Subscribe Now! http://www.youtube.com/iczfirz Very beautiful Deadpool from Eastman. Got his permission to release this MMU remix version. Sliced with PrusaSlicer and timelapsed.…
Inspired by the elegant lines of Gothic architecture, the Gothic Throne Headphone Stand showcases your headphones in style while keeping them secure. The sturdy base prevents tipping, and the curved top preserves headphone cushions.…
Modern designed headphone holder with decentered arm. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧 Includes STL + Fusion 360 files for…
I created this model to solve an issue I frequently found in many existing headphone stand models. Other models I saw all included the hook below the actual clamping mechanism which did not really work for me due to obstructions in my…
Headphones hanger, you adjust size of it by bolt, sometimes thread is not fitting so you need to use sandpaper and maybe some grease. You can change dimensions in freecad.
Jedná se o remix stávajícího držáku z Thingverse. Upravena šírka plochy pro třmen sluchátek, délka šroubu a jeho závit. Pro lepší fixaci ke stolu je možné na dosedací plochu přilepit tenkou gumu. Pro tisk bez podpor je nutné držák…
Simple headphone stand Suggested print settings Add a modifier to print the base plate at 80% infill to increase the weight and stability of the stand.
Call of Duty Headphone Stand, slots together. Makes a great gift Print the top with supports touching buildplate @3DPrintBunny
Update: 2/8/2023 : Added a variant with an even stronger total load capacity by addressing the weakest bend in the first model, but you can't push it quite as far into a desk because of the curve. See “Variants” for which one to print.…
God's perfect idiot' only smaller. .12 layers with supports. Collect the all! Stan Lee Batman (1966 Style) The Joker Blade the Daywalker X-Men's Beast Daredevil
Use a toothpick to attach the top crystal Make sure to add proper supports for the bow tie or use the included 3mf file Differences from the remixed model: Better looking top sim crystal, actually symmetric Fixed geometry in some places…
Combo headphone hook holder and a single SD card holder. I've originally made the hook for my Koss Porta Pros, which have a very narrow headband. Due to popular demand, I've also added a version for wider headbands. And there's also the…
Here is a statue headphone stand that was inspired by the classic marble sculptures of the renaissance. When I had the idea for this I couldn't find anything online that was similar, so I made it myself. This probably wouldn't be a good…
Now your headphones won't take up space on your desk. There's a couple of similar designs out there, but I haven't found any that would be nicely curved on the top and front, so I designed my own. There's a bit of angle so it clamps…
Hey thanks for checking this out if you like the figure, please make sure to leave a like and a picture of your creation! tolerances are tight at first but once together they will move as a normal Lego would! If you like this model check…
Wall mount/stand for an Xbox (or similar) controller, and headset. Holes are sized for #8 wood screws (which I believe should be equivalent to 4mm wood screws if you don't use freedom units). Intended to be printed on its side, but people…
So, COVID_19 has you stuck at home, binge watching Game of Thrones (again), and you need another beer (not Corona, that wouldn't be cool) so you go to put down the headphones that your wife makes you wear because she's sick of your choice…
![Desk Headphones Hook [Easy to Print] [Multiple Variants] / Clamp / Holder / Hanger](https://media.printables.com/media/prints/664262/images/5232779_79e6456f-825b-420c-b549-25ccaeddc536_e9b42033-6509-4546-87ec-a2d2b3b002b1/dsc_3556.jpg)
![Vertical Headphones Hanger / Clamp [Kallax] [Easy to Print] [Multiple Variants] / Holder / Hook](https://media.printables.com/media/prints/663848/images/9073575_3e0a47ae-93d3-4674-baa9-523682eaa44c_2ecbe634-d193-4580-af2c-590abfc9a03b/headphone-clamp-v23-32-ext.png)
