131 modeli
Heyho Here I have a completely 3D printable pulley for you! I recently designed an attachment for my clothesline (which also works great!) and of course the idea came up to simply use a pulley! Previous designs I found online always…
I modeled this vase after i did the luxury vase, because i wanted one thats easier to scale. I also made a tripleversion of this, and changed the design a tad for that. Looks also amazing printed. :) Prints best with an 0.6 or 0.8mm…
Heyhoo Here I have a new Container for you :) Perfect to store away some dry stuff like Coffee or other things! In addition to the obvious, that the container is as well sealed as possible, I also took great care to ensure that it is very…
Introducing the Figure 8 Tree Support Marble Run! If you’re looking for a challenge you have found the right place! But brace yourself, this print takes quite some time as it will fill your build plate. **Pictured model is scaled down to…
I printed several lightsabers from 3D printing world and the children had a lot of fun with them for two days until they were unfortunately both broken :(. That's why I did the work (way too much xD) and developed a version of this old…
*I designed my own version of the Hexagonal Nanoleafs. * * For people who look for an easier project without the soldering, please check out my No Soldering Version. * https://thingiverse.com/thing:5207176 Why is this version better than…
In this project, I used led strip and lithophane photo to make decoration panels. Each module is a hexagon panel and can be used to make different shapes (nanoleaf alternative). For each light panel, you will need 0.5m of LED strip, the…
This is a Version of my Turbo Funnel that I created for bigger stuff like Silicagel, dry food or other bulky stuff. This 3D-printed funnel features an extra-large outlet, allowing for fast and smooth flow—perfect for transferring coarse…
This is a sorting tray i designed to organize some lego parts while building. But obviously you can use it to sort or store what ever you want ;) You need to orientate it before printing! Just bottom to bottom! In the pictures you see the…
I decided to try free fusion 360 (been working in other programs tho).. I decided to do a simple carbine then I got sucked to make it actually usable… so as you can see it is version 11 (oops).. its design is based for 3D printers and can…
Heyho I built a finger skateboard some time ago and I'm still super happy with it myself :) The first parts I printed back then are still alive and working like the first day. But some people had problems with the pressfit during…
Versatile and Scalable Plant Pot Riser Use case: I present my pot-riser system, which allows for customizable height and radius adjustments through your favorite slicer, catering to various plant pot requirements and offering…
Heyho :) Greater Update 27.12.202: V2 I redesigned the Glasses & Inlets for a sturdier fit and an easier assembly! Inlets are symmetrical now. Inlets lock in place a lot sturdier and have some tolerances. Templess taper down at the end…
* I redesigned my own version of the Hexagonal Nanoleafs that doesnt need any soldering. * If you want to use individually addressable LEDs like WS2812s or have more effects, check out https://thingiverse.com/thing:5154193 Why is this…
You can support me here:https://www.buymeacoffee.com/Pandalogy Print test on X1 Carbon with PLA+ Extruder Flow rate tested on:0.98, internal/Outer/infill setting (outer wall tend to cause print in place to stick together) Test Hinge can…
Box with dovetail lid and four compartments. Size: 80x60x30mm (scaleable) Material: PLA Layerheight: 0.2mm Infill: 15%
Description Here is my version inspired by NanoLeaf. There are 4 different thicknesses of hexagons to add dimension (25mm/30/35/40). And a textured lid (remember to sand the seam on the hexagon and on the lid before assembling them…
Took the original and cut it up to fit onto the printrbot simple metal with heated bed. printed mine at 210%. took 3 weeks and another 5 days for assembly. Drilled and pinned along with epoxy Print instructions Category: Animals Print…
These are various geometric shapes that are easy to scale. Each has an edge length / circumference diameter of 10mm, with a centred origin. Have fun with these shapes and any suggestions are welcome!
I made a simple box witch latching lid. It should be scaleable as well.
NO SUPPORTS NEEDED! This little box in PCB style has a screw cap and can be scaled up as you like. Looks good when printed in PCB colors: green and copper. Have fun! Material: PLA Layerheight: 0.2mm Infill: 20%
NO SUPPORTS NEEDED! Very easy to print scaleable PRINT-IN-PLACE box. Have fun! Material: PLA Layerheight: 0.2mm Infill: 10-20%
Overview This is a sturdy double-sided shower hook. Great for towels, wash cloths, etc. if you don't have a towel bar nearby. I designed this to fit my shower which has a width of just under 1". I designed the hook to be non-slip by…
Simple clean and modern Geometric container made in blender and fusion 360. Makes a great print and its proportions mean it scales well for many uses. Vase for flowers, pot for plants or holder for pens on a desktop.
TubeCore – Modular Connectors for Hollow Tubes TubeCore is a modular connector system designed for hollow tubes . Its scalable design makes it easy to build everything from FPV gates and racing structures to frames, stands, prototypes,…
I designed a Logo as cover for the exeptional good hexaleaf from @ElHeisa : I used this Hexaleaf Project, there is an other one from ElHeisa without soldering . It should fit for both versions. You have to print a “round” shape of 7…
Tired of your paint pots tipping over and wasting your expensive colors? This might be the solution for you! This paint pot holder is specially designed to prevent your pots from tipping over. As a feature, the holder includes two rests…
Do you recognize these from our favorite Critical Role Circus Man? I was so excited to make this request! Finally, some Mollymauk Tealeaf jewelry tips that fit our Cadence Ram Horns . These ornamental tips are based on the official…
There are a lot of so-called “Heaxleafs” on the internet, here is my version. They are basically a copy of the Nanoleaf. I used the top part only as a template and cut my own opaque acrylic, this gives a really nice look. Parts: 2x…
When my mom asked: Can you make a 3-piece flower pot set like these? I came up with this design. I used Solidworks as the CAD program and sliced it with Superslicer. Print Settings Printer: LNS3D N200 Rafts: No Supports: No Resolution:…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/iePD6n5aqLo Category: 3D Printing
Scale it before print ! Category: Keychains
Probe holders for the Saleae logic analyzer. Newer orders of the logic analyzer have these really nice plastic cases for
Hey guys, this is a spool holder meant to be installed in its track. Its designed so that the weight keeps the arm in the track, and you have to lift up and tilt nose up to pull it out. The printable track is 202mm (8"ish) across, and…
A simple geometric bookmark that you can scale to your liking.
Heyho Here I have a hinge that is designed to be printed with 2 materials. A stiff Frame and a flexible Core + Connection. Also there is a support made out of the stiff material. The hinges are made with two materials ( soft & hard) . The…
DIY Nanoleaf / Hexaleaf Fully 3D-Printed WLED (open source esp webinterface/app) to control the 10mm wide ws2812(b) LED Strip Mount with double sided Tape No Supports Needed
I always wanted a Nanoleaf but they´re so expensive so I thought I can print one. So here it is. I used WS2811 LED Stripes and a ESP8266 with WLED to light this Model up. These are the stuff I used: WS2811…
Rugged case for the Saleae Logic 8 logic analyzer. Includes organizers for all of the accessories, including 16 probe slots, dividers for the two wire harnesses, a USB cable, and the logic analyzer itself. Assembly follows that of the…
With the fusion file you can adjust the size on your own. :)
Funky looking spherical cable clips to keep stuff tidy around the office or home. Scale to size so to hold cables snug and enables you to remove them and adjust lengths quickly … great for USB charging cables and power connectors. The…
Planter - Blobs stacked (scale-able) A modern planter design with stacked blobs. Planter is watertight! The inner blob structure is only in the last 3 rows for faster printing. I uploaded one size but it's easy to scale to your wishes:…
A modern planter design with intersected blobs. Planter is watertight! The inner blob structure is only in the last 3 rows for faster printing. I uploaded one size but it's easy to scale to your wishes: For Ø120mm plant pot Thank you for…
The factory battery cover on my OLYMPUS BLS-50 has no clip and is easily lost. This replacement cover has a dimple finger grip which serves as a neat friction catch. The cover is lightweight, quick to print and protects exposed contacts…
Heyho Spring is coming :) Since everyone in Germany is now a hobby gardener, I was looking for a nice solution for my small plants! All parts can be scaled to any size! This means you have the option of making very small or very large…
Updated model on 9/22/2023. Moved towards locking tabs to better support resin.
BluBracket is the Super Scalable and Over-Engineered 90-Degree Mounting Bracket! It can be used for a variety of cases including shelving and construction projects. BluBracket can be printed in any size and with any material and infill…
This is my pot that can be scaled up or down, has a screw-on seamless drip tray and offers great drainage due to large bottom holes. To avoid soil passing through holes, a ‘’mesh'' needs to be printed, in your slicer, remove top and…
TinyMtn Free Pack 5 - Hawaii This is a package with 3D model files for four notable landscapes in the state of Hawaii, USA. Mauna Kea, 13,796 ft / 4205 m Mauna Loa, 13,679 ft / 4169 m Haleakala, 10,023 ft / 3055 m Napali Coast Each…
Balea razor cap / Balea Rasierer Abdeckung
A little heart-shaped-pike for decoration. I created it to put it into a vase of flowers. You can scale it to the size you need using the slicer. Category: Decor
Yafia, M. et al. Microfluidic chain reaction of structurally programmed capillary flow events. Nature 605, 464-469 (2022). https://doi.org/10.1038/s41586-022-04683-4
PLA is fine for this job. The cover needs to be reprinted every now and then because the retaining pins wear out over time.
Saleae Logic come with a carrying case but the zipper on mine broke, so I created this model as a replacement. Printed with a Prusa Mini (0.6mm nozzle) with Prusament Galaxy PLA
A completely scalable clip to hold your paper on the print bed while drawing! At 100% it was made for 4mm thick bed.
I saw nerdforge's video ( https://www.youtube.com/watch?v=2OP-oEbzB6g&t=562s ), but I didn't have enough room to hang their hexaleaf against the wall. So I made this small version. I use an arduino nano with the fastled or neopixel…
Simple adapter to mount a Brennenstuhl Alea Socket Block/Cube on the IKEA Skadis board. It connects the mount shipped with the Brennenstuhl Alea via two M3x8 screws.
before printing: scale it up so that the loop part does not fall into the christmas ball's hole after printing: thread in a yarn through the loop gently twist the two ends to fit into the christmas ball then untwist the ends again
Heyhooo Here I have two prusa/ printable fan beads for you! I like them both but it is up to you to choose one! For the dual color version you will need a MMU or XL though :) Sizes: The Single colored version comes in 3 sizes for the…
Marked as WIP because the project is shelved. I haven't tried the clip and the hook on the wall yet, but it should work okay. Category: DIY
A remix of Nerdforge's awesome Hexaleaf project. Nerdforge Video: https://www.youtube.com/watch?v=2OP-oEbzB6g I found I had issues with implementing the code onto an ESP32 easily, so I created a video to explain how I finally got it…
I needed a holder for my Kaleas laser range finder, so I created my own. To connect it to the honeycomb storage wall, please use the M3 insert. I recommend 10 mm M3 screws.
See the description of the original model. All I did was add labels to make it easier to know where all the pieces go.
Assembly: The mount requires two M5 nuts and two M5*10mm screws After printing, insert the nuts to the printed mount, then screw the Stereo IR 170 (Evaluation Kit) onto the mount Mounting: The mount can be mounted to any GoPro mounts that…
This is a storage bin for the Saleae Logic 8 logic analyzer. It has space for the device itself with the leads plugged in, and a dedicated area for 16 the grabbers. The model should be easy to print, and no supports are needed.
I wanted a light weigh insert hub cap to my Scale Auto 1:24 cars. Created this simple 5 spoke model that fits into the standard wheels. Can be printed in PLA or PETG. Print with 0.10mm Detail Feel free to print in any color for you own…
These handles were made for two cheap flat wrenches used on an ER11 collet. The handles make the wrenches more comfortable to use, and have the additional benefit that the wrenches can be color coded. The handles simply slip onto the…
We provided some different Balearic sling ammo types. You can print and use as is or create molds from prints. Can resize as you wish. Use the smooth ones to add your own textures. Can add holes for whistling. Enjoy
A compact case that holds the Saleae Logic 8 and it's accessories. Version 2 is smaller and closes more securely than version 1. The included print files will print the case with the honeycomb floor pattern. If you choose to use these…
Enhance your 3D designs with this free, printable M30 screw/nut and hole connection! This set includes both male and female objects and is easily scalable down to 25%. You can use this model freely, with no attribution required. A key…
We tend to collect a lot of different razorlades from different manufacturerers. This is a scalable solution for the mess that tends to build up. You can chose of a height of either 3 or 4 blades high, and scale up as high as you want.…
Kleine Korrektur 2023-01-14: Beim mittleren Teil war außerhalb des Sechsecks noch ein Fragment vorhanden. Dies ist mir heute beim nochmaligen Slicen aufgefallen. Ich habe das STL sowie das ZIP-Archiv aktualisiert. Gude Eintracht-Fans…
Hex shape is provided so it can easily be held with tools. Hole ID is 10 mm Hex shape is 20mm length is 10mm simply scale the x and y to whatever hole size you want to test. Example: if you want to test a 6.75mm hole, set X and Y scaling…
This was made specifically for the Mini Punch Set I got on Weaver's website, which happens to be made by Realeather Crafts. The model is split into a base and an insert so you can have fun with different colors. — This is part of a…
Demijohn stopper - 50 mm inner diameter, you can scale for your needs
HexaPen Holder A simple pentagon-shaped pen holder, which you can scale to your needs. I printed this in PLA, but you can use any other material. Prints nicely in most types of filament You can use any layer height, though I recommend a…
i made this model for the teabag organizers contests . the organizer is a tea leaf shaped organizer which can hold teabags and sugar. the model is simple to print you can use any printing profile you are comfortable with any material, i…
Should be pretty easy to print, my settings are: Layer height: 0.2mm Infill: 15% gyroid
I needed a flexible connector for dust extraction. fits 40mm PVC pipe printed in TPU vertically.
Project I made using a ESP8266 as a controller for the LEDS (WS2811). Make sure your first layer of the hexagone is perfect because you will see all the imperfections. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No…
sized for 30mm nut
Designed for 0.6 mm nozzle and 0.4 mm layer height, but of course it works for finer settings too. Fully stackable, device is easy to grab by hand.
Крышка бойлера черная P0049 Saeco Talea Giro Black cover for vain boiler P0049 Saeco Talea Giro
Alea evangelii , which means "game of the gospels", was described, with a drawing, in the 12th-century Corpus Christi College, Oxford manuscript 122, from Anglo-Saxon England. It was played on the intersections of a board of 18×18 cells.…
Description I made these boxes to store cards for the splendid "Nat's what I reckon - YEAH NAH board game, but they are easily adapted to suit any other game. You can find files for the game TOKENS on the attached .3mf file or download…
This was made specifically for the Maxi Punch Set I got on Weaver's website, which happens to be made by Realeather Crafts. The model is split into a base and an insert so you can have fun with different colors. — This is part of a…
A travel razor blade for the Balea Sensation blade razor Print in PLA To Remove the Cover from Razor, push right and left from the cover
I made these boxes to store tokens for the splendid "Nat's what I reckon - YEAH NAH board game, but they are easily adapted to suit any other game. You can find files for the game cards on the attached .3mf file or download STLs HERE .…
Permanent Quick Release plate for ARTCISE FH6 video head modified to use M6x20 for mounting Analog Sky Magic. Use double sided tape (or cloth tape) to increase friction between the QR plate and binoculars so it don't spin. Link to video…
Baleal é uma pequena península (outrora ilha) situada ao norte de Peniche, na região Oeste, de Portugal, separada do continente por um tômbolo, formando uma praia de fina areia branca. O surgimento da prática desportiva do surf na…
This model includes two components: a simple Gridfinity stackable bin for the Saleae Logic Pro 16 analyzer, inspired by @Shellgame's Glasgow and Cynthion bins : a stackable 3×3×4 Gridfinity bin, that fits the analyzer device alone; a…
Hülle für den Medizinischen Curaleaf Vape Pen Durch die Öse sollte 550 Paracord (4mm) passen, um sich den Vape Pen um den Hals hängen zu können.
PRINTED: FLASHFORGE CREATOR 5 | GENERIC PLA | INNFILL: 15% SUPPORTS:YES EDITOR: TINKERCAD This X-Y-Z scaleable version of a MESH BOX requires supports for printing. The mesh design provides for a heavier duty application.
Building Brick STL Generator Parametric generator optimized for FDM 3D printing (compatible with common bricks). Recommended PETG Settings For fast results with PETG, use these PrusaSlicer settings: Setting Value Profile 0.2mm SPEED…
I was starting to get bored with the factory panels, and I broke one, so I planned a new one. Unfortunately with magnets I couldn't try it I will have to order it. The model itself can be easily modified by solid operations, such as…
I wanted to twist the ALEA Power Cube to get better access to the side ports. I used two existing designs to create it. It fits into the bottom port and is connected to my desk using double-sided adhesive tape. Kudos to @gabhalling for…
This is a gridfinity compatable Saleae Gen 1 Logic Analyzer Holder. Printed with 10% infill
Rear Wing made from 3 parts. Side wingtips are glued onto main wing body.
A “flying” bog planter. Will need a few feet of cord and some knot-tying skill, NBD. Printable rings are included if needed. This is designed to fly Sarcennia and other bog plants from hangers, in our warmer regions. The pot itself is…
![Saleae Logic Case [V2]](https://media.printables.com/media/prints/252098/images/4397408_0f55963e-44bb-4dec-8f8f-c428da957dd5/img_8108.jpg)
