6481 modeli
A nice and quick pot/planter for your lovely plants! they will love it for sure We suggest printing it in a dubble layered vasemode - the outcome is nice and rather quick :D Happy printing! :D
Wydruk około 1,91 €–2,33 € nettoWstępna wycena jednego wariantu
A new take on my previous design - i changed it into two vases. They fit well togheder especialy printed in two diverent fillaments. Easy to print in vase mode (1 or 2 layers) - filament PLA/ASA Happy printing! :D
Wydruk około 1,38 €–1,68 € nettoWstępna wycena jednego wariantu
Intro This is a very compact, low-profile 90 degrees right-angle bit holder for standard hex bits . It is designed to reach screws where a normal screwdriver or bit holder simply does not fit. The special designed variable bit fitting…
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
Angle drill guide Possible to print in 2 colors (with one extruder) => change at specific layer For max 8 mm drill Requires a 20 cm / 20 cm print bed
Wydruk około 2,02 €–2,47 € nettoWstępna wycena jednego wariantu
Here is a single print that measures inside and outside angles to within +/- 1 degree. It is one print with no support needed. The pointer hole provided me a medium press fit on the pin. This allowed the pointer to turn,, stay in place,…
Wydruk około 1,70 €–2,08 € nettoWstępna wycena jednego wariantu
Drill Bit Sharpener for Dremel with true Relief Angle. This jig is using a Dremel Cutting Disk for Sharpening. The 2 Parts are held together with a M3 Screw and Nut.
Wydruk około 0,21 €–0,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I remixed this model because I had a collision with the connection of two frame parts on my Core One. To fix this, I thickened the contact surfaces slightly and moved the camera a bit further inward. This now allows for a secure fit,…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
As some of you asked - we made the cilinder shaped triangle pot into a V shaped one! We hope you will enjoy it as much as we do :) Simple remix of the Tradicional Triangle Plant Pot and Planter Best to print in 2 or 3 layered vase mode…
Wydruk około 0,92 €–1,12 € nettoWstępna wycena jednego wariantu
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
Wydruk około 1,63 €–1,99 € nettoWstępna wycena jednego wariantu
Semi Circular Protractor 180 Degree Angle Ruler 0 to 9cm and 0 to 150mm Type: Protractor Size: 150 x 94 x 1.50mm
Wydruk około 1,25 €–1,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Triangle Filament Clip (Based from K2 Clip) The clip can be left to "float" on your filament spool while printing. Three identical anchor points to facilitate the installation of the clip. The solid form is easier to print if you have…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
This print in place design contains a ruler with metric scale and more. The following features are integrated: Stencil for angles of 30°, 45° and 60° - That can be used on edges by bending. Ruler with metric scale Round holes for checking…
Wydruk około 3,55 €–4,33 € nettoWstępna wycena jednego wariantu
I redesigned my 40° coupler from the ground up! The Fusion360 design is now more parametric, so if you want to mess with the angle, get the source here! https://a360.co/2BwCLdH It's also shorter, and has a smaller footprint in general. It…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print flat on the print bed, you will want to look into the setting "Initial layer horizontal expansion" (that is the name in Cura) with a negative value to combat elephant foot, since you need precise sides. The holes can be used to put…
Wydruk około 0,85 €–1,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have built a 4WD car and programmed it to be controlled by phone. However, it didn’t look quite right, so I designed a new body. Since my printer isn’t large enough, I scaled it down slightly (to 97.5%) in PrusaSlicer. The result turned…
Wydruk około 4,11 €–5,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
gabarit d'angle pour laser, positionnable facilement grâce a des aimants.
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
My own take on the very prevalent angled wago mount. This version has retainer lips on the rear side so the wago can't slide out. Also I think all the others are double mounts. If using this with high voltages or current, you should…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
This 3D printed optimized double din dash kit looks and fits better than most aftermarket solutions. No fasteners are required due to the built-in clips, which securely lock in the head unit to the radio cage. Thoughtfully designed with a…
Wydruk około 2,22 €–2,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Presliced gcodes included: MK3S - QUALITY/SPEED; 0,2 layer height MK3.5 - STRUCTURAL/SPEED; 0,2 layer height MK3.9 - STRUCTURAL/SPEED; 0,2 layer height MK3.9S - STRUCTURAL/SPEED; 0,2 layer height MK4 - STRUCTURAL/SPEED; 0,2 layer height…
Wydruk około 1,02 €–1,24 € nettoWstępna wycena jednego wariantu
The main publishing location for this model is on GitHub. Go to the GitHub page of this model for the latest updates, Blender source file, and more detailed instructions. Go to my site for an overview of my other models . Only a few of…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
This is an easy-to-print Synthesizer Stand angled at 45 degrees. I am using it for several synthesizers at 100 percent and 85 percent. I print up the first batch of four and am now printing another four. Will support Synths or mixers up…
Wydruk około 20,80 €–25,42 € nettoWstępna wycena jednego wariantu
I needed a 45°/135° angled IKEA Vidga corner piece but IKEA only sells 90°. So I created an OpenSCAD model where you can set any angle you want. Adjust angle and radius in OpenSCAD file Printable with minimal supports. Use brim
Wydruk około 1,63 €–1,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Introducing a 3D print model that reimagines the art of typography, providing an innovative way to communicate messages. Our distinct letters, printed at angles, offer a captivating and creative approach to presenting text that you can…
Wydruk około 0,57 €–0,69 € nettoWstępna wycena jednego wariantu
My own take on the very prevalent angled wago mount. This version has retainer lips on the rear side so the wago can't slide out. Also I think all the others are double mounts. If using this with high voltages or current, you should…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
I used the Triangle Labs Dragon Hotend v2.0. The hotend comes with m2.5x8 (4x) and m2.5x5 (2x) I use the m2.5x5 on the front and the m2.5x8 in the back. This is because the threads do not go all the way through the hotend so you need them…
Wydruk około 1,96 €–2,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hygrometer - https://amzn.eu/d/1nIj0yG Most of the Amazon ones are the same, as long as the dimensions are 48mm x 28.6mm Magnet - https://amzn.eu/d/4x4VSJl 3 x Magnet Size: Dia. 6mm x Height 3mm Hygrometer to be close to my plexiglass…
Wydruk około 0,52 €–0,63 € nettoWstępna wycena jednego wariantu
My own take on the very prevalent angled wago mount. This version has retainer lips on the rear side so the wago can't slide out. Also I think all the others are double mounts. If using this with high voltages or current, you should…
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
I remixed these from topxnbo on thingiverse to be the same thickness for the bar as the depth guides. I also added an easy angle gauge to each bar. 1/8" - 90° angle gauge 3/16" - 85° 1/4"- 80° 5/16" - 70° 3/8" - 60° 7/16" - 45° 1/2" - 30°
Wydruk około 8,61 €–10,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I broke this piece of the warning triangle compartment in the rear door of my Passat 3C (year 2009) by closing it too hard. I have designed this just like the original and after 3 years I have not broken it again. It's true that I've not…
Wydruk około 0,80 €–0,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
3D printable model of two Gangle's masks. Printing instructions Everything is configured in the 3MF file, but I highly recommend at least adding more perimetres , because you'll be doing a load of sanding. And for best result supports are…
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
This is my first try on creating a chainmail type fabric. Prints fairly easy, if you have difficulty with first layer, you may want to size it up. I created it in Onshape, you can find it here…
Wydruk około 1,31 €–1,61 € nettoWstępna wycena jednego wariantu
A Remixed Cover Lens for a Raspberry P1 Camera V2 board with an ArduCam 8MP IMX219 Sensor module (for RPi and Jetson Nano) with a 175deg Wide Angle M12 Lens. I included the Step file for your remix convenience.
Wydruk około 0,28 €–0,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
An adjustable desktop or tabletop stand for the Victron Cerbo GX Touch 50 display. It prints in place with no assembly and has four different adjustment angles. From the front of the display it's nearly invisible and for the size of the…
Wydruk około 3,48 €–4,26 € nettoWstępna wycena jednego wariantu
1.Necessity. Incompatibility due to size of TRS straight jacks that protrude too much for the required application. From a size of 50mm to 20mm. 2. Solution. Manufacture with MDF printer (Fused Deposition Modeling) an angled housing where…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
a small multi-purpose angle bracket (36mm x 30mm x 38.5mm)
Wydruk około 0,76 €–0,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Pen Holder Gyroid Triangle Stl-Files (without configuration) 3mf-Files (with configuration) for MK3S and Mini Printfiles (G-Code) for MK3S and Mini Stifthalter Gyroid Dreieck Stl-Dateien (ohne Konfiguration) 3mf-Dateien (mit…
Wydruk około 4,57 €–5,59 € nettoWstępna wycena jednego wariantu
This a parametric model of a Angle Setting Block for chisels and plane blades. It is important to have consistent bevels on your blades and this setup block keeps your angles correct every time. Just line up the chisel or plane blade with…
Wydruk około 1,58 €–1,94 € nettoWstępna wycena jednego wariantu
Fits perfect on the 2002 Jeep Wrangler stock CD player. The .scad file has parameters you could adjust for similar push-button, spin-to-select type knobs (as often found on a printer's LCD).
Wydruk około 0,33 €–0,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print-in-place laptop stand by @Cherry_Labs. I modified hook height for my 16” Macbook Pro (2023) or laptops up to 14.29mm thick, including the rubber feet. Cherry Labs recommends printing with a 0.4mm nozzle. See his model page for…
Wydruk około 4,56 €–5,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
angled mount for IKEA's SKYDRAG lamp
Wydruk około 0,29 €–0,35 € nettoWstępna wycena jednego wariantu
Posting this as a remix of Skaran's model, since I'm actually using his remixed long arm to hold the camera, but the original enclosure I'm basing this on is over at thingiverse I also made a dimensionally accurate model of the camera…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I used PLA, no brim (nor support).
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
Simple gauge for the few variants of countersink screw head angles. As always I am including the source files in the Fusion360.
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
Fits well. Could use some tightening on the vertical by a few mm. https://www.3dprintlog.com/prints/264099 https://www.tinkercad.com/things/5WkBTqhKpWe-3-key-wknob-macro-keycase
Wydruk około 1,88 €–2,30 € nettoWstępna wycena jednego wariantu
I need a shelfs for my IKEA LACK tables and it was late at night … so I just print a few.
Wydruk około 1,46 €–1,79 € nettoWstępna wycena jednego wariantu
My second try on creating a chainmail type fabric. Prints easy, just needs patience and good first layer adhesion. Here's the Schematic I created in Onshape…
Wydruk około 2,72 €–3,32 € nettoWstępna wycena jednego wariantu
Rigid and functional angled wall mount for Mi Home 360
Wydruk około 3,48 €–4,25 € nettoWstępna wycena jednego wariantu
Printable stave drum angle gauge. As it is a parametrizable model you can change the angle to your desired drum size. This angle gauge was especially designed for stave drums, but it can of course be used for completely different things.…
Wydruk około 1,76 €–2,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This angled stand is designed for the Focusrite Scarlett 16i16 USB audio interface. Improved visibility: Tilts the unit 15° for better viewing of input meters and front panel LEDs at desk height. Cable-friendly: Raises the interface…
Wydruk około 4,30 €–5,26 € nettoWstępna wycena jednego wariantu
This was the original description ronsprenkels had for his model: My take on a angled filament feedthrough for my filament drybox. I printed a few others that are available here, none were completely to my liking. So I took the…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
This is a rosette for the heater mounting. Two parts to print.
Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I've been fairly happy with my filament feed system that I converted from a commercial food dehydrator. Sometime, a new spool will get a little slack, and filament will wrap around the center axel underneath the spool on the way out of…
Wydruk około 2,79 €–3,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Upgraded nut for angle grinder disc saver
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
This is for a 2021 NMNA JBL front speakers. The front speakers are directional and point down. This angles the speakers a bit while using the original screws and provides better acoustics. I also discovered when removing the speakers that…
Wydruk około 2,12 €–2,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This replacement end cap allows you to use a right-angle C7 power cord with your Scosche BaseLynx modular charging system. Design features Same styling as the original part, but slightly wider to accommodate the right angle power cord.…
Wydruk około 2,23 €–2,73 € nettoWstępna wycena jednego wariantu
Needed a proper angled mount to store and display my headphones. I meassured out the angle of my ceiling (see picture) and designed a sturdy 3 part ceiling mount. There are spacers in the back, for my wall/ceiling I designed the spacer to…
Wydruk około 3,14 €–3,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
support amovible sans outil pour enrouleur de sangle pour volet roulant. 2 périmètres, 20% de remplissage. base à coller avec un double face de qualité, si besoin on peut les visser , mais il faudra percer les bases.
Wydruk około 3,15 €–3,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Sturdy, compact spool holder mount for your 3D printer! Easy to print and assemble.
Wydruk około 1,55 €–1,90 € nettoWstępna wycena jednego wariantu
Please consider supporting my hobby. You will make my day! Or just print this out and share your make. I appreciate your support! If you are looking for the pyramid, I moved all those models to their own page. You can find it here.…
Turn off arachne mode! Discover the Triangle Fidget Toy , a mesmerizing gadget designed for endless fun and relaxation. With its unique triangular design, this toy stays intact while allowing creative play in both 2D on a flat surface or…
Fun toy to play with. Triangle columns jointed together can slide up and down. The model is printed in one piece. No special settings/Supports required. Infill 5-15%. Layer height 0.2mm or less. Model on photos was printed with Bambu Lab…
All my designs on Printables.com are free to download for personal use, but if you like my work please consider to buy me a coffee =) 4-Door JEEP Wrangler with removable Hardtop If you have any questions, let me know in the comments. You…
Printing Instructions/Recommendations 50% gryoid infill provides weight and strength so it can move through with just gravity 0.2mm layer height PLA for good finish Offset is around 0.2mm between objects - will not scale down well Print…
Hello there, Full credit to user Rusty__Shackleford for this great model "Angled fore grip mlok AFG M-LOK" I just remixed it by cutting side mount which didn't really worked for me, also took me too much time thinking about good angle for…
Lets you drill into something at a specific angle. It's quite small, the guide hole is 8mm. Optional: add an M3 screw to lock it in place. Or else it will just swivel around. Assembly Instructions: see gif
I DID NOT MAKE THIS. I did not make this design NeoTecLabs “made” this they stole the design from Flexi Alicorn by Jeffrey Yang. but a lot of people liked what they made including me and have been asking around for the files so I am…
with this nozzle you get circular flow in the pool instead of just straight in. It helps to keep the pool clean.
A very useful tool when treating surfaces, e.g. woodworking. With these tetrahedrons both sides of the board can be treated immediately. Only minimal traces are left at the contact points. They are about 20mm high and as it is a…
Multipurpose legs. They adjust in height and angle. Perfect for adjusting the angle of projectors. (The legs in the photos have been attached with thick double-sided tape.) A slightly curved section is included for easier attachment to…
Hier haben wir eine Wandhalterung für 18V Makita Akkus in der angewinkelten Version. Durch die angewinkelte Halterung lassen sich die Akkus angenehmer einlegen und entnehmen als bei den normalen geraden Versionen. Es sind Versionen für…
Painters triangle (or painters pyramid) for holding work off a surface while applying paint or finish. Can fit at least 8 on a prusa mini at a time. They print quickly and easily. Triangles are also stackable for easy storage.
Angled Vertical Foregrip (M-Lok) I was looking for foregrips on thingiverse but couldn't really find one that I liked so I decided to make one myself. I found this grip made by Strike Industries and I really liked the look of it so I…
The camera on my k1c was not perfectly centered so I redesigned the bracket with an angle of 10 degrees. It replaces the original one, just unmount the whole camera (1 screw) disassembly and replace the original bracket with printed one…
A fully parametric polygon fidget. Printing tips: Decrease the printing speed Decrease the cooling fan's speed For a robust handle use 3 walls Ensure a good bed adhesion How to customize your own? You will need to download FreeCAD , a…
This 90° Corner Clamp will give you a helping hand when holding 90° corners and "T" joints together securely during assembly. A second is included for “T” joints or to allow access for gluing. Great for things like constructing model…
What makes it special This triangle version takes the BEST passthrough idea into a three-sided shape, and its structure runs smoothly once the pieces are set up right. It prints with a structural design that helps the print go smoothly,…
The Drill Angle Tool helps you drill at precise angles without expensive equipment. It comes with three inserts at 30°, 60°, and 90°, which are designed with an open structure so you can use most drill bit diameters . The tool rests on…
This compact Angle Finder gauge will measure the True Angle of an project, as well as provide the Mitre Saw Cut Angle. The tool will measure internal or external details, so that coving, cornicing, skirting etc can be cut to accurately…
Učebná pomôcka. Pre úsporu materiálu je 5% výplň.
dummy 13 wings but the wings are bigger, no I didn't just scale them up only the wings are bigger the ball joint and backpack thing are the same size.
Designed for discs with a 22.23 mm (7/8") center hole , it is compatible with a wide range of standard angle grinder discs. Mounted using 3x 4mm screws. Features Mounted using 3x 4mm screws. Prints without supports Perfect for organizing…
JEEP WRANGLER WITH REMOVABLE HARDTOP - SCALE 1:12 (Now updated with optional "angry eye" grill) Fully printable model kit This model does not need any additional non-3dprinted parts. OPTIONAL: LED lights from IKEA (LEDFYR) Clear akrylic…
Check out some of my other fidget keychains! Captain America Gyro Fidget Square Gyro Fidget What shape is superior to the square? Here are four different sizes that print quickly and are a lot of fun to fidget with. They'll make a great…
Sometimes all you need is a 45/90 degree tool for tracing and cutting. It is a 2 piece tool that is a must-have in any Carpenter toolbox. You can use them combined and it is good to join wood planks at 90 degrees or to trace lines tracing…
This is a canopy for the BetaFPV Air Tinywhoops, like the Air65 and Air75. The longer tail section allows a lower camera angle to be set. I also made a widening in the area of the right holder to additionally fix the antenna connector. I…
The angle template makes it easy to transfer any shape! The ledges can be added to as required. Variable adjustable into each other, the measuring unit is in cm. 5 ledges can be screwed together for storage. Print settings: Infill: 75% .…
REVISION HISTORY 2023-07-23: v1.01 released - resolved issues with overhangs in the “teeth” 2023-05-08: v1.00 released PROBLEM I found out that though my JST tweezers, being very effective for pulling out and connecting back JST…
Drill sharpeners in various sizes for DIY enthusiasts - BOSCH PWS 9-125 CE - FLEX orbital sander The drill sharpener uses high-speed rotation for grinding (FLEX orbital sander), it is set at an angle of 118 degrees in total for both…
An ergonomic angled foregrip.
This phone holder is designed to hold your phone vertical or horizontally at three different angles: 60, 70 or 80 degrees. The holder comes in 2 different models, the lightweight or infilled model. The lightweight model prints on its side…
I remixed the Precision Tweezers by M4NU to a cranked version. For that I chopped off the folding mechanism and added the 45deg angled legs. The folding mechanism is ideal for remodeling the legs and also in terms of “printability”…
TriangleLab Bowden Tube Clip, 1.5mm thickness. Edit: Added another version 1.6 mm thickness. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.1 Infill: 10 Filament: SUNLU PLA+ White Category: 3D…
New V3 with grooves for grip, angle markings, and modified dovetail channels! Slightly tighter clearances as well for less play. New V2 dovetail design added! Slightly flexible filament like PETG recommended to join the pieces without…
i separated the wings and base
!!Important!! I highly recommend straightening the Z-Axis gantry before doing this mod, as explained here . The Ender 3 V3 SE/KE faces a significant issue with a wobbling frame, which can result in serious quality problems, especially at…
electric cabinet key (triangle)
I corrected some details of the original version, like the front grill and the key supports.
Remix of Shqype MLOK AFG With Correct Holes and Guide Tabs This is an upgrade over my M-Lok AFG Angled Foregrip. There are "wings" that wrap up around the handguard. It should fit most slim AR-15 octagonal handguards with flats that…
If you are interested in this product, you can search for this code on Amazon: B0DQVBH1NB Youtube:bMESK551y4g
![New Angled Coupler for PTFE Tubing [PC4-M10]](https://media.printables.com/media/prints/37394/images/369595_474b669c-2177-4d92-bb73-0382863ed5f2/img_3225.jpg)
