219 modeli
Here is my own interpretation of the razorback form The Expanse. The model is design at 1:30 and mesure around 67 centimeter height but designed to be undersized until 34 % size without issues (1:90 scale - 23 cm height). It can be…
Wydruk około 2,21 €–2,70 € nettoWstępna wycena jednego wariantu
This is a car badge inspired by the Expanse ship Razorback, with the outline of a 2019 Mercedes GLC added. I will add any other custom car outlines in place of the GLC300 that you like: if you agree to post a make, or make a donation to…
Wydruk około 0,57 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My second Expanse Bookmark, it's 19.5cm long by 2.6cm wide. I've included the PrusaSlice .gcode for the colour change as well as the normal .stl. If you're interested in Expanse merchandise then this email from Master Replicas will be of…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
This is my Rocinante model which is supposed to represent the Rocinante ship as it featured in the very last episode of the season 6 of the show Expanse. It has CSL plating, railgun, PDCs and torpedo tubes. The model is 50cm long and has…
This is a 3D printed model of a generic Corvette Class Light Frigate of the MCRN from the tv show the Expanse. This particular ship is named the Phobos. The ship has several features: - Retractable PDCs - Openable Torpedo tubes with…
This is my take on the Morrigan Class Patrol Destroyer from the MCRN. It is done to scale to my Rocinante model. The model is once again kit so no glue needed. It has two features: Retractable PDCs - the same as on the Roci. Retractable…
This is my MCRN Donnager class model from the show the Expanse. Model is some 35cm long and comes with a stand. It is a kit so it does not require a single drop of glue to put together. I highly recommend to use the following video in…
This is a 3D printed model of a Orion Class Heavy Frigate of the MCRN from the tv show the Expanse. This particular ship is named the Deimos. The ship has several features: - Retractable PDCs - Openable Torpedo tubes with torpedos -…
This is my model of the Raptor Class Light Cruiser from the Show the Expanse. This ship appeared as the infamous Pella in the Free Navy colours. I however made it in its original MCRN colours and with my own name. (The colour structure is…
This is my model of the Scirocco Class Heavy Cruiser from the Show the Expanse. The model is a kit and does not require any glue. Unfortunately it is not done in scale with my previous MCRN ships as that would mean the ship would reach…
H0 (scale 1:87) coal bunkers/campsite 100mmx70mm with board. The boards can be inserted variable! H0 (Maßstab 1:87) Kohlebansen/Lagerplatz 100mmx70mm mit Bretter. Die Bretter können variable eingefügt werden! Print instructions Print file…
This is a 3D printed version of the Amun Ra Class STEALTH Frigate from the show the Expanse. The model is not the most accurate but is still not bad. Assembly does not require a single drop of glue as it fits all together like a kit. The…
It's a Print-In-Place model, without the need for any support material. It also takes advantage of the material properties, meaning that there are no external parts or hardware, it's just the material that allows it to flex and store…
Found this cool logo on the internet. Quickly redraw it in vector and made a 3d printable version in Fusion360. Enjoy! Personal use only! Not for sale. Print instructions Do a simple color change when base color finished.
This is the model used to make the torpedo in this video: [video link]. It's very much a prototype - the final model had quite a few post-print modifications made to it. If I get time, I'll detail those modifications (that could probably…
Red bits Purple/Blue bits (carbon silicate laced armor) Black bits Light Gray bits (Silk) Dark Gray bits Slices better with PrusaSlicer 2.4.0 (rather than 2.4.1 or 2.4.2-rc2) Simply load up each .3mf file as a project into [at least]…
MCRN Scirocco Class Assault Cruiser from The Expanse. It measures about 495mm from the tail to the tip of forward antenna. Almost all the pieces were printed not using supports. I used supports on three of the mid-section structures. The…
This desktop moving sculpture adds beauty and interest to the daily grind. Based on the ratios of Theo Jansen's Strandbeest creations (http://www.strandbeest.com/), this mechanism is an interactive way of visualizing the motion of a…
Hi Darren, I've sliced it up as best I could to a possible print. Please check that sizing suits your needs also. I'm not even sure you could wear it because the neck seams small and may need to be in seperate pieces to fit on your head.…
Remix de 02 formes que j'aimais bien ! Le résultat est vraiment cool Un joli chaudron Moon avec des anses mobiles + des pieds de dragons ( https://www.thingiverse.com/thing:2593806 ) (…
Inspired by the SpaceX-Coaster ( https://www.prusaprinters.org/prints/88-spacex-landing-pad ) I made a coaster with the pinup girl logo on the Rocinante spaceship from the series The Expanse. As the logo is not my property please note the…
Groupe en pierre d’Echaillon H. 420 ; L. 298 ; P. 145 cm; pds. 18000 kg Paris, musée d’Orsay In 1863, Charles Garnier, the architect of the new Paris Opera, commissioned four sculpted groups from four artists who had won the Prix de Rome…
My Educational Mechanical Examples Series This model is one of my educational mechanical mechanism examples on 80mm x 80mm base plates. You can find all models in the series in this collection => [Mechanical Mechanism Examples] The…
Follow me so you don't miss my next models from The Expanse Update : I modified two files ("Fire selector" and "safety 2of2" because on FDM printers it was too complicated to reproduce the small details. So I'm making available an FDM…
This is a more accurate and printable rendition of a Martian PDC from The Expanse. The PDC rotates on the turret and the turret itself can articulate on the mount. I made this model from the ground up to work with Martin's Rocinante (…
Features Receiver has been slimmed down to fit the shroud Two-tone shroud with full length picatinny rail Optional M3 brass inserts for bottom rail, for a bipod Stock is a bit barebones/minimalist, since I wanted it to be printed as one…
Here is my own interpretation of the UN One form The Expanse. The model is design at 1:100 and mesure around 52 centimeter long but designed to be undersized until 40 % size without issues (1:250 scale - 21 cm long). It can be printed on…
Walking Roboter
This is sketched from a screenshot capture of a Star Helix pistol from S1-3 of the Expanse. 9 parts that should make it easy to paint and assemble. Photos are of my initial sizing and test build. The photo is of the print totally…
Model of the Rocinante with MCRN logos. Added plenty of extra details to the relatively low quality model provided by SyFy. Print with 0.4mm nozzle and 0.2mm layer height or better. The guns were made by Gaz23, who seems to have deleted…
Arachnobeest A lightweight, easy-to-print walking octopod robot based on Jansen linkages. With just a handful of bolts the entire robot can be built and controlled with parts in the standard XRP robotics kit. Assembly In Progress Control…
This is my version the MCRN Landing Skiff from the show Expanse. The model is in scale with my other MCRN ships and comes with retractable PDC, Retractable engines, openable main hatch and “posable” guns. It is a kit and does not require…
This is an approx 1:85 scale model of the Razorback from "The Expanse". Few pieces which klick together. Thrusters have to be mounted with screws, which also hold the inner frame together. Core needs to be printed upside down. Usually no…
Wrist Phone holder for Galaxy S8. V9 is more "Screen Accurate" thank you for the excellent screenshot. Helped a lot. It's designed for a phone 80x160x16. So you can scale the model proportionally for whatever size your phone is. The…
Tycho Station from The Expanse. This is a work in progress. In the end it will fit into a "Behemoth"/"Nauvoo" base. 9/6 B4 v1 files:(current) Split in 1/2 along the ring level with added peg holes for the side antenna's. Files for Side…
Follow me so you don't miss my next models from The Expanse Please respect the orientation of the objects (see picture of the plate and/or the 3MF file containing the plate. And don't forget to “place on face” all STL because they are not…
It is not HSW compatible. Recommended print settings: PLA, 0.6 nozzle, height 0.42 mm, 2 perimeters, gyroid infill 15%, 4 layers top and bottom, and no support except the switch and AC connector areas I liked @LudekSlouf_2081788's remix,…
Danse Macabre - Efteling Wall Lamp This is a recreation of the lamps seen in the queue of Efteling's new ride, Danse Macabre . (also as seen in the former Spookslot ) Printing Details The parts are designed to fit on a standard Prusa…
The video: The assembly: Step 1 Step 2 Step 3 Warning The position of the lines is extremely important for the functioning! The pieces: X4 - Pin Horse G X24 - Pin Horse P X4 - Automaton A X5 - Automaton B X4 - Automaton C X4 - Automaton D…
Modified some panels, added torpedo tubes, added hatches and new stand to Martin's model.
This is Epstein's Yacht from the series “The Expanse”. It was created by Chris Kuhn and posted by owlstraw on Sketchfab as a 1pc model . The Expanse is one of my all-time-favorite series and love the many different spaceships and unique…
The Dropship was printed on a Prusa MK3S+, 10% infill, 0.15mm, no supports. The model measures around 188mm.
Dimension Internal diameter : 61mm Interior depth : 52mm
Modified some panels and added torpedo tubes and hatch to Martin's model. Added a stencil to help paint the ship name.
The MCRN Scipio Africanus is a Light Frigate equipped with dual torpedo tubes and twin PDC emplacments. The vessel was designed and built by the Martian Colonial Navy to serve as a escort, boarding craft or patrol vessel.
WARNING: The support bars on the front and back of the ship are fragile. I STRONGLY recommend using a resin printer for this.
I wanted to make a decoration of the E5 for my desk, which I thought would have a model available due to its popularity… To my surprise, there was not! only paid models for a large amount of money (sometimes over 70 USD!) So I made my…
best printed on a resin printer.
This is a model of the Donnager from the popular sci-fi show The Expanse that i modeled for practise It is necessary to adjust the components in the slicer so that it may be printed correctly with minimal supports. You can also print a…
Extended the frame plate to secure the bottom handguard to the rest of the frame. Created a custom angular mag (6 dart capacity). For the extended frame plate use two M3x8mm screws after drilling 2mm holes in the bottom handguard. Use the…
Update 2023.12.07 - added scaled down version for mini sized pin version. This won't work for the “live” version of the fansets lower decks badge. That one has a different magnet orientation. Created this to enhance the fansets lower…
I've had the idea for these bookends flying around my head for the last two years, and finally got around to building them. My part of this model is a basic bookend with the Ring Gate from The Expanse. I then used the Rocinante model from…
A new 3D figurine generated by AI, a Rabbids Prima Ballerina (Lapin Crétin Danseuse Etoile). I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small…
Hansel and Gretel: Witch Hunters - Gretel - 2013 3d printable model.
Remix from Martin's great model of the Rocinante. Each PDC uses two 6x3mm magnets.
This is the control panel for an Expanse "O2 Backpack". Decals, side handles, and upper hose plate included. The v8 design is made for a "TFT FeatherWing - 2.4" 320x240 Touchscreen For All Feathers" display from Adafruit:…
Grimm's Fairy Tales - Hansel & Gretel Lost in the Woods 3D printable model.
Coaster/plaque of the logo for Eros Station, before it ended up on Venus, obviously.
I remixed this awesome design by @Dustin to enable MMU3 printing on the same layer. Printed on a textured print sheet to help hide any layer lines. If printed on a PEI smooth sheet, you can touch it up with a heat gun to get rid of any…
This is a personal fan art project inspired by the universe of The Expanse. As a professional architect with a passion for science fiction, I wanted to reimagine the spaces and structures that might exist in this incredible world. I’ve…
Hansel and Gretel Witch Hunters - Hansel - 2013 3D printable model.
A lid to fit a canister of cleanser / scrubbing powder (such as Comet brand). For stuff that's such deadly poison, you'd think it would come with a lid, but they never do. The skull and crossbones image is from http://www.clker.com and is…
Grimm's Fairy Tales - Hansel & Gretel - The Witch 3D printable model.
Coaster (or plaque) of the logo for Ceres Station. 3 levels, White > Red > Grey/Black
Wanted to make some drink coasters but wasn't sure what design to go with. While searching, I stumbled across the idea of The Expanse logos and turning them into coasters. I took some existing OPA logos, traced new versions in Fusion360…
I’m a huge fan of The Expanse and wanted to incorporate some of the faction logos with the grips for DeSteiner’s 1911 mechanically working Prop Gun Pistol. There are grips for: MCRN, OPA and Amos' Devil pin. (as with any part that’s been…
Enjoy this coaster, and always remember the Cant! Printing slightly larger helps with the detail… source material is “spray paint” looking, so not a solid a design, lots of little gaps.
ANSELMO EL MACETAS --------------------------------------------------------------------------------------------------------- He hecho una maceta con la forma de un muñeco sujetando una maceta…
I've long wanted to build a replica of the bullpup rifle used by the Martian Marines in The Expanse, and I decided it'd be fun to do so as a remix of the awesome Lynx by Orion Blasters. This is the first time I've ever released a set of…
Remember the Cant. Badge/patch for the Canterbury under operation of the Pur & Kleen Water Company. Mess with the vertical scale until you're happy with it. I shoudl have given the color layers more height, and less to the base. I went…
This is a fully 3D-printed music box, hand-cranked through a 4:1 gear train. It plays the 16-bar climax of Camille Saint-Saëns' Danse Macabre on a pinned drum and a 24-tooth comb. No electronics, no spring motor, no hidden speaker — and…
The UNN flag from the Expanse TV series. I've included the colour change .gcode from PrusaSlicer.
The goal of this project was to build the throwable LED-"Grenade" used by Jim Holden in the series The Expanse. Steps: Print two main structures in Gray/Black PLA. Print 12 translucent/transparent PLA inserts. Optional: Print the TPU…
Hansel and Gretel: Witch Hunters - Muriel The Grand Witch - 2013 3D printable model.
Set of holders for the 14s active balancer, and a fuse box for this system. - Jeżeli chciałbyś zapoznać się z tym co robię na YouTube i Facebooku Zapraszam: https://www.magazynowanie-energii.com - Lista wszystkich urządzeń, które posiadam…
Hansel and Gretel: Witch Hunters - Mina the White Witch - 2013 3D printable model.
Grimms' Fairy Tales - Hansel & Gretel - Witch's Gingerbread House 3D printable model.
Grimms' Fairy Tales - Hansel & Gretel - The Gingerbread Witch 3D printable model.
This is a PDC I created from the ground up in Blender using reference images from the show The Expanse. I have another variant of the model out there, but this one is closest to the show's PDC, while still being printable with an FDM. I…
This is a Shinkansen-rocket toy model for my children. It was produced under the influence of the following post. https://twitter.com/sado_kouta/status/1709158854850654271 My post is here. Please enjoy!…
Modeled after the uniform version of the logo. Enjoy. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Notes: I used the prusa color changer tool to stop at 4.3mm and change to a…
Grimm's Fairy Tales - Hansel & Gretel Witch House Scene 3D printable model.
Hansel and Gretel Witch Hunters - Tall Witch - 2013 3D printable model.
Grimms' Fairy Tales - Hansel & Gretel - The Final Scene 3D printable model.
Aeration grid for hanse588 - replacing the plastimo ones that are very fragile. To be printed in PETG of the color you prefer…i include also the scad file for other customisations.
Increased the size and split into two pieces for printing on my Prusa MK3. I also designed a base that holds it at this particular size. Assembled stands 280mm tall. It can be reduced but I have no idea if the stand will work at a reduced…
CAnSee is an ESP32 / Arduino firmware as a fast CANbus access gateway for the CanZE app. See full description of the project here : https://gitlab.com/jeroenmeijer/cansee/-/wikis/home This is 3D printed case which accomodates with cheap…
Fans of The Expanse, show off your Martian Pride with this flag for the MCR (Mars Congressional Republic) Print instructions I designed it to be printed in 4 layers. The bottom layer is 2mm high, in red. Then the remaining layers are each…
Swansea City AFC fridge magnet. Approximately 75 mm in diameter and 3 mm deep. The gcode file has a recess for an 8x3x1 mm magnet. Alternatively, add your own recess to the main file in Slicer or just glue a magnet onto the flat back.…
Farben 1 Blau/blue 2 Weiß/white 3 Silber grau /grey 4 rot/red, orange/orange, braun/brown (je nach modell) 5 schwarz/black
Increased the size and split into two pieces for printing on my Prusa MK3. I also designed a base that holds it at this particular size. Assembled stands 280mm tall. It can be reduced but I have no idea if the stand will work at a reduced…
I take no credit for this model, I only wanted to upload a colored variant to make it easier for other to print.
This will have limited utility for most people. It fits over a 1" transducer pole and holds a transesophageal ultrasound probe in position during cardiac surgery. The measurements are specific for a Philips X7-2T TEE ultrasound probe.…
The fit is pretty tight so depending on your printer you may need to trim it down a bit. I just had to used a deburrer to shave off the elephant foot an make a nice bevel so it would press right into the frame. The files for the frame can…
NOTE: [To make the black Eye dots easier to print i simply had them at 200% in size in the slicer and it turned out great.] Did a simple mutlicolor remix of this one in meshmixer, just separated the Main body, Eyeballs and Eye dots so it…
A coaster with Amos' famous line. Done in 3 levels, black, silver, then black again (for the upper rim).
![Cromulons from the 5th expanse [Multicolor Main Head Remix]](https://media.printables.com/media/prints/164813/images/1530976_3a1a018a-1b8a-49c5-a8ee-417b07b6f477/large_display_20191031_174859_164813.png)
