516 modeli
Very happy with this creation, it's a 35:1 print-in-place dual stage planetary gear system (sun 1 : ring 2). The really cool thing is that the rings won't shift without the inner gears being turned, so no back-driving ; the arms are…
Wydruk około 1,46 €–1,78 € nettoWstępna wycena jednego wariantu
ANTISTRESS DOUBLE RING
Wydruk około 1,81 €–2,21 € nettoWstępna wycena jednego wariantu
A clamp based on a planetary gear set that is useful as a mini-vise. I increased the overall size and modified the design of the jaws to eliminate the need for supports and increase clamping area.
Wydruk około 6,28 €–7,67 € nettoWstępna wycena jednego wariantu
Very satisfying star that is printable in one piece
Wydruk około 19,62 €–23,98 € nettoWstępna wycena jednego wariantu
Badge de l'expédition Atlantis de la série Stargate Atlantis, fixer 2 petits aimant 6*2 et il ira parfaitement sur votre réfrigérateur ou autre ;) Possible aussi de l'adapter pour le fixer autrement. Pour un meilleur rendu faire un…
Wydruk około 2,93 €–3,58 € nettoWstępna wycena jednego wariantu
Upgraded version of my previous antistress star with better handle.
Wydruk około 20,53 €–25,09 € nettoWstępna wycena jednego wariantu
I designed these boats to better hold the meeples in Survive: Escape from Atlantis! When moving the original boats during games, we found that the meeples inside would often fall out. In Survive , the point value is indicated on the…
Wydruk około 0,34 €–0,41 € nettoWstępna wycena jednego wariantu
Still (mostly) Print-In-Place! Print Instructions: Supports required under for the ‘post’ portion of the clamp as well as the Qube500 mount points & post-hole. I recommend organic supports for this. I've place some special voids inside…
Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu
Leaf Looking Praying Mantis. Play around with the orientation. Its going to be a difficult cleanup no matter what.
Wydruk około 3,78 €–4,63 € nettoWstępna wycena jednego wariantu
Wydruk około 1,34 €–1,63 € nettoWstępna wycena jednego wariantu
See it in action in the below video! Print Instructions: Supports required under for the ‘post’ portion of the clamp as well as the Qube500 mount points & post-hole. I recommend organic supports for this. I've place some special voids…
Wydruk około 4,62 €–5,65 € nettoWstępna wycena jednego wariantu
Inspired by the Atlantis display at Kennedy Space Center, Florida, here is an add-on for the 3D Shuttle Stand. Attached is the gcode to pause the print at layer 20 in order to change filament color. Also attached, is the NASA logo to be…
Wydruk około 2,20 €–2,69 € nettoWstępna wycena jednego wariantu
Update 05/23/2024: Now that Frantisek23 has further perfected his design , I definitely recommend his new solution and basically declare my remix obsolete. Since the EndRib_V1b Mini.stl model is no longer available from him in the course…
Wydruk około 1,33 €–1,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Don't be afraid to transfer your coffee anymore. Now you can walk or run with your drinks, without worrying that they will be spilt around. The steps are easy to follow. First, put the drink in the cup. Secondly, put the mug on the Cup…
Wydruk około 8,59 €–10,50 € nettoWstępna wycena jednego wariantu
This is my model of the Atlantis as seen in Stargate Atlanis tv series. Model is over 60cm in diameter and approaches 3 kilos. It has already built in preparation for the LED lights so if you want to make the towers and stardrive lit, you…
Hello everyone, This model serves as a cover for the wiring and board that remain exposed after removing the stock shroud from the Kobra 2 series while installing the Mantis fan duct.…
The rings have a diameter of 20 mm, 17 mm. (Making more later)
This is the third of six ship models designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:
This is the fourth of six ship models designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:
This is the first of six ship models designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:
This is the second of six ship models designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:
socket adapters for mantis tool grid system keeps long sockets from rolling around by standing them on an angle
This is the sixth and final ship of the six ship models designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the…
This is the bonus ship designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:
This is the fifth of six ship models design to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:
Fit to Parts: Extruders: -Sherpa Mini -Hextrudort -LGX lite -HGX lite -Orbiter 2.0 -Orbiter 1.5 (see adapter plate) -Sherpa micro (see adapter plate) -Bowden -BMG like (see adapter mount) -Titan (see adapter mount) Hotends with BMO/V6…
Get ready to fidget in style with this ingenious 3D-printable foldable stress reliever ! Engineered for ultimate tactile satisfaction, this model offers a unique folding mechanism that transforms it into an endless source of calming…
Ich habe die Original Halterung für den MANTIS 5015 Toolhead angepasst, so dass dieser auch an einem VORON Switchwire verwendet werden kann. Alle benötigten Druckdateien sind entsprechend enthalten. Der Sherpa Mini Extruder kann…
I love my Voron 2.4 300, but I've been bothered by how PLA print speed is grossly cooling bottlenecked. I haven't seen a CPAP based mod for the Mantis toolhead that I could just slap right on to replace the stock ducts so I made one…
EDIT 01312023: Fixed and issue with the Rapido Mount. There was no clearance for the BHCS that attach the Tap Front Part to the X Carriage. Thanks Mahican for pointing this out. Also, there's a new mount for the Rapido that has an…
I modified my last Mantis TAP toolhead to now support Simon Vez's Goliath hotend. I'm using CPAP on this but it has the standard mantis fan mounts if you want to use the original Mantis 5015's, but you will need to get the correct ducts…
Es hat einen Durchmesser von 6cm. Man muss es mit sehr weichem TPU drucken, das es elastisch macht. Ich habe es mit 0% Infill gedruckt. (Optimal ist auch Infill bis zu 10 % wenn ihr den ball sehr zerquetschen wollt) Wichtig: ohne Stützen…
Last Update: 8/28/2023 Update - Currently working on a V2 of the toolhead Current Issues - Nothing to report as of now Updates - Updated V2 ducts improve cooling if you are experiencing any cooling issues, please reach out so I can solve…
Simply antistress toy A simple smooth cube 30x30mm with a ball inside. I like to use this toy as a stress reliever. I created this model as part of learning Freecad. I printed a lot of versions of this die as a test model as well. I also…
Introducing the Mantis Mini, this is a fully 3d printable pc case utilising a flex atx psu, low profile gpu and itx motherboard. Measuring 193.5 x 118.5 x 193mm this is a compact case which will fit in most small spaces. This case…
Time and material saving The model has been designed to enable fast, simple and material-saving printing. There are larger and more detailed models, but these require a much larger print area or the printing of several parts. Improvements…
A Stargate Atlantis Themed Door Controller that I remixed from a 3D model by "Ksst" that I found on Google Sketch-Up 3D Warehouse. https://3dwarehouse.sketchup.com/model/d647c7413566a8e9fae947e64ee50374/Atlantis-motion-sensor I made space…
This is a set of rock formations that will fit onto the main 4-6 player map of Guards of Atlantis II. It includes the 1 space, 2 space, 3 space & 4 space formations that I felt really mattered for the game. I did not make the back walls…
Circuit board cover requires 1 m3 (can use the one that held stock cover on). Just version 1. I plan to remove more material to access connections easier. For use with kobra Mantis quick release fan duct.…
Crafted specifically for 3D printing, my fan-designed Stargate Atlantis deluxe model brings the iconic sci-fi portal to life. Measuring over 27 inches (685mm) in width, the design showcases intricate detailing on both the front and back.…
This is the bonus ship designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and serves as and addon to the Atlantis scaled fleet.
A 3d model of All Might from My Hero Academia posted and converted for easy drag and print. first measure the distance betwen the case's bottom and gpu's height when at the proper lifted height, then apply that measurement to allmight on…
Last Update: 10/21/23 Current Issues - Fixed the belt plate (added heat set inserts that were supposed to be added. Carriage Compatibility MGN12(H/C) MGN9(H/C) Hot End Compatibility Rapido HF & UHF Dragon HF & UHF Dragonfly BMO Revo Voron…
This is the bonus ship designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and serves as and addon to the Atlantis scaled fleet.
Summary Want to build Mantis Claw with only 3D printed parts? This M4-sized pin is designed specifically to help you assemble Mantis Claw quickly by hand without additional sourcing of M4 nuts and bolts. You'll need 4 pins per arm, so for…
Angular mantis with long faceted arms and triangular geometric body.
Easy to print model Print flexi segment as many as required for the arm The solder iron holder can be attached the base using a nut and bolt(M5 to M7 size) To get a proper fit of the arm to stay in place increase the flow rate to about…
Wonderful plug-in toy for all types of people.
I wanted some extra rail adapters for the Mantis X system. They are $10 a piece so why not 3d print some. I looked and could only find ones that replaced the baseplate so I made some. The one that came with mine had a screw hole so I made…
I've included my models for the main and secondary side buttons PCB in case anyone finds it helpful to create their own mod. That said, only the main PCB is tested for accuracy as that is the one I used in this model. For assembly, slide…
Edit : ajout de la version Xol (Non testé pour le moment) Edit 2 : ajout du fichier Step, je suis en train de tenter une version avec levier mais pour le moment je suis limité dans mes compétences en modélisation Filament Cutter pour…
The mantis clamp is a nice design, clever use of planetary gears. I noticed however that when you add some torque, the gears tilt and jam. Each of the four “planets” have a hole in the center, this opens up the possibility to add axles to…
Quick Note: The 3-layered ‘quick’ and ‘thic’ versions are best. Various sizes included. One of the key elements of the original Falcon Clamp not preserved in the Mantis Clamp is a compound planetary gearbox featuring fused sun gears.…
Originally started with the idea of recreating the Atlantis logo located in the City. I drew the logo in SVG to cut it out of the wood. See my final photo. To be able to share it with you, I made an STL version, you can also find the svg…
Last Update: 9/23/2023 Update - Currently working on a V2 of the toolhead. WIP - Still working on the front shroud design that's pictured. Current Issues - Nothing report as of now. Recent Changes/Updates: Updated V2 ducts improve cooling…
The Ulysses from the Disney Movie Atlantis: The Lost Empire. Printed on my Longer LK5 Pro with raft and tree supports. Available to print as a whole or as two parts. My favorite movie growing up, I just had to have myself a model of the…
I know most people want to use the Mantis toolhead to reduce toolhead weight and print faster, that was why I did it. I also really liked the new Voron Design TAP nozzle probe though so I wanted to be able to use my Mantis toolhead with…
«SCYTHEON MK.IV HYBRID» Cyberpunk mantis blade «Hey, choom! Well, what do you say, time to put a little more "cyber" into this punk? I got just the thing for you — some shiny, brand-new military-grade chrome. Just make sure to upgrade…
NON COMMERCIAL USE ONLY. If you intend to print this commercially, please contact me for licensing. Longer mudguard/fender for Kaabo Mantis 10. Comes in variants: Standard (90 mm) | Wide (110 mm) Front | Back Mudguards are longer than the…
Hello to the community! The Modular Vibration Reduction Leg is designed to enhance the stability and quietness of your 3D printers and other vibration-producing devices. I strongly suggest printing the cat springs and optional socks using…
This is the bonus ship designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and serves as and addon to the Atlantis scaled fleet
An old design I made in High School! From Thingiverse: This a project that took me over a month and a half to make. It was really fun to make. Category: 3D Printing
Źródło oznaczyło ten model jako treść 18+.
Upgrade your Ender 3 or CR10 with the Mantis Dual 5015 Toolhead , designed for the TZ E3 2.0 hotend and enhanced cooling. This toolhead features dual 5015 blower fans and a 3010 fan, providing exceptional airflow and cooling performance…
Ruger Mark 22/45 MK III, IV 22lr Bull Barrel, picatinny adapter, for Mantis X or Tactical light. TRL-1, TRL-7,… Designed to fit the Ruger Target pistol with the 22mm diameter bull barrel. Rounded front, to make sliding on of Mantis X…
I have created a new carriage for the Mantis XOL 2 printhead to use a Bambu Lab hotend in combination with VORON TAP. I also modded the faceplate to have one with led mount and one without. The complete carriage fits the new VORON TAP…
This is a display base for Stargate Atlantis, to replace the larger display base that came with the Stargate model. It is designed to be printed on a multi-color printer. For example a Bambu Labs printer like the AI or X1C with an AMS -…
Magnetic fidget toy BOM: 6 pcs magnets 6x3 optionally cyanoacrylate glue for magnets
Printer brand: Flying Bear Printer: Ghost6 Rafts:No Supports: No Resolution: 0.2 Infill: 100% Filament brand: Esun Filament color: red, blue Filament material: PLA+ Slicer: Ultimaker Cura 5.2.1 Wall thickness 2 mm Top/bottom 2 mm Printing…
I separated these from the original design to make downloads easier. Stargate Atlantis Glyphs, so you can now make an SGA Gate. I designed them to use 5mm LED's for the lights. Category: 3D Printing
The Atlantis Ring and its symbol are empowerment tools that help protect, balance and harmonize a person’s energy field. Its beneficial energetic properties help shield the aura and minimize the effect of harmful frequencies. It helps…
I made an insert to put everything Atlantis Rising, including Monstrosities expansion and Orator promo, in a single box, with no lid lift. It fits sleeved cards (Mine are all sleeved with Swan PanAsia thick sleeves), but it's a tight fit…
This one is a bit bigger making it quite useful for other applications. As a phone holder or in the kitchen to drain a bottle of honey or sauce. Just a handy size. One of the key elements of the original Falcon Clamp not preserved in the…
This is an insert for the phenomenal game, Guards of Atlantis II. It's not the most compact design, but that's not really what I'm going for here. This insert aims to do one thing: get the game out from the boxes and onto the table as…
Filament Cutter for Praying Mantis Printhead Fits to Sherpa Mini, Hextrudort, HGX lite and Orbiter Extruders as well BOM knife no.4: https://a.aliexpress.com/_EJTAJfR M2,5 nut M2,5 x 5 screw M3 nut M3 x 15 screw Sping frim ballpoint pen
Aquarium decoration with coliseum ruins in atlantide format, you can also just cut and use some part of the file. Printed without supports, but be careful the bigger it is the longer the bridge the extruder will have to make.
Just swap this file for the one in the original design files.
Very detailed Calakulumn (Or Karakulum) class Great battleship from space battleship yamato. While it is somewhat recommended for Resin printers with this, I did redesign this version of the model to be compatible with filament printers,…
Da ich den Mantis mag aber mir die Leds gefehlt haben, musste ich mal etwas zeichnen ;) Ich benutze es in Verbindung mit einem Rapido HF Hotend.
Box Insert for Survive: Escape from Atlantis! aka The Island and it's expansion (5-6 players + dolphins / octopus / blue dice) Made to perfectly fit in the original box insert. You need to print one of each file, except you need 3 times…
Dry fire laser training practice target for use with the Laser Academy app. They have a pdf this target available free to print on their website. I wanted something with a little more heft. Made using their pdf and hueforge. I printed…
Just cuted model for better printing and assembling quality. Used middle finger model from autor.
Printed on my LONGER LK5 Pro with raft and tree supports. I assembled the fins with hot glue and then left to cool. Blender 3.1 Eevee render
I remodeled the Mantis led to mount on Mantis Toolhead. The original model comes with a Rapido HF. I shortened the model by about 6mm.
The sweet and silly Goofy Owl 🦉 You can't help but fall for those big bewildered eyes, chunky proportions, and iconic goofy grin. Engineered for an easy, fun, and smooth 3D printing experience, this high-personality model makes an amazing…
Remix of the Mantis toolhead to keep some of the features I liked from the SB
For the Kobra 2 Max I would print it @102% maybe get away with 101%.
Printed on an Ender 3 V3 SE, using PLA, and it worked perfectly. Print Settings: Scale up to your liking Use 100% infill (works best) Model prints fine without skirts or brims Doesn't need supports Resolution 0.2 Notes: Body is solid but…
When I use the MantisX with the Dry Fire Mag I want to leave my light on and train as I carry. I would also like to use all my existing holsters for holster drills. To accomplish this I made a base plate with a built in Picatinny rail to…
A Stargate Atlantis Themed Wall Light that i'm designed for accent lighting in my TV/Game Room. I made space to add 12v led light strips under each crystal and room for running wires. Note: I have not printed/tested the design yet. You…
I have created a new carriage for the Mantis 5015 printhead to use a Bambu Lab hotend in combination with VORON TAP. I also adjusted the upper fan supports. The complete carriage fits the new VORON TAP without any changes. The step files…
Antistress toy, easy to print - no supports, just print and spin. I recommend printing at 150% size.
***Please be aware that I did this mod on my Rook 2020 that is using 250mm for the Z Extrusions and Rods. My build volume is 120mm(x), 120mm(y), and 155mm(z). I'm not sure how it affects the Z if the mod is applied on a stock Rook 2020.…
Hello guys, While in lockdown I decided to design my own antisnag Gopro support for my Tonfly performer helmet. For now the result seems to work as intended but was not yet tested, so print & use with caution and at your own risks. Fits…
Sub Pod Model from the movie Atlantis: The Lost Empire. Growing up Atlantis was my favorite Disney movie and I credit it for sparking all my creativity at a young age. I had started this model a year ago but only a few weeks ago did I try…
Modified crazy ducts from Mantis github: they are 8.5mm lower to accommodate Dragon/Rapido UHF and added mounts for neopixels. Rest of the toolhead can be found here:…
![DNL Kaabo Mantis 10 Mudguard [std/wide, front/back]](https://media.printables.com/media/prints/306890/images/2689878_5597f1d7-da13-4fc0-90cf-2c543353b984/img_3648.jpg)
