Liczymy pasujące modele…
Since I saw a mechanical watch for the first time I wondered: How do they work? Why does it tick and why is it ticking with a constant frequency? And why is there this thing, which keeps tilting from one side to the other? To answer my…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
3D MODEL DESCRIPTION My father needed a blade balancer for his lawnmower blade this summer, so I designed him one. How it works: If the blade is unbalanced, one of the edges will weigh further down than the other. Then you have to remove…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
Since I saw a mechanical watch for the first time I wondered: How do they work? Why does it tick and why is it ticking with a constant frequency? And why is there this thing, which keeps tilting from one side to the other? To answer my…
Wydruk około 0,68 €–0,83 € nettoWstępna wycena jednego wariantu
A starter for the urgent desires. So, com board is ready and was done with M3 heat inserts in mind. As there is currently no idea of where it would commonly fit this is not the final solution. I for my part will fit it into a gridfinity…
Wydruk około 1,35 €–1,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Prusa Balance Game is great and the Prusa Balance Game Box is a great way to pack it. However, the Prusa Balance Game Box requires quite a lot of material. I have slightly adjusted the model by making the walls of the box thinner near the…
Wydruk około 6,94 €–8,49 € nettoWstępna wycena jednego wariantu
[FR] Les pièces présentées sont deux dés à 6 faces équilibrés couramment utilisés en jeux de rôles, jeux de stratégies ou autres jeux de sociétés. Il n'y a pas d’instructions de montage, l'ensemble est composé de deux pièces…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
Intro Keystone is a calm but surprisingly challenging balancing game for two players. Build a wall from small, asymmetric stones — each piece is different, every round plays out differently, and every move matters. You can play together…
Wydruk około 9,85 €–12,04 € nettoWstępna wycena jednego wariantu
Give all those perfect and imperfect benchys a second lease of life, with this octopus benchy balancing game! Printing Instructions Everything can be printed using adaptive cubic infill for speed, 0.2mm layer height, and your favourite…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
Description The game challenges players to stack dice to form a tower, offering fun for both children and adults. 21 (or more if you print more for harder challenge) dice are evenly distributed, and players take turns rolling no more than…
Wydruk około 8,37 €–10,23 € nettoWstępna wycena jednego wariantu
16.09.24 Updated the Top Part so it got it a bit more clearance. It Now opens and closes much smoother This model is for the 50% Version! However it shouldnt be a Problem to Print at 200% for the normal sized one! Made sure the 200%…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
Les 2 balais du collecteur moteur sont maintenus en pression par un ressort et un petit crochet isolant. Ce crochet étant cassé, celui-ci, imprimé en ASA remplit parfaitement la fonction. Existe aussi en pièce détachée sur…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
Hello, Today I have Balance Block Stacking for Kids for you . The game can be played in several ways: - Play until someone drops one or more cubes - Play until the base turns over and all the cubes fall - Just stack until the cubes run…
Wydruk około 6,64 €–8,11 € nettoWstępna wycena jednego wariantu
Turn standard tennis balls into a test of precision! Print a batch of these rings and see how high you can stack them. Here are three ways to challenge your kids or friends: The Speed Sprint: Who can build a 9-ball tower the fastest? Race…
Wydruk około 0,39 €–0,47 € nettoWstępna wycena jednego wariantu
This model of a simple balancing scale was created to be used as a teaching aid in an “unplugged” activity regarding sorting algorithms. The material might be used in computer science or maths classes to give students the opportunity to…
Wydruk około 1,32 €–1,61 € nettoWstępna wycena jednego wariantu
This model replaces the switch rocker of the BuschJaeger Balance SI series and allows the use of a Hue Button instead. A small magnet (ø = 15 mm, height = 1,6 mm) is inserted on the back so that the Hue Button holds magnetically. Due to…
Wydruk około 1,05 €–1,28 € nettoWstępna wycena jednego wariantu
TEXELLATION How many Texases can you tessellate on the Gulf of Mexico before the tower topples? Printing - I used PLA with a 0.2-mm layer height. For the Texas tiles, start with white, then change colour to red at 8.8 mm and blue at 9.4…
Wydruk około 0,21 €–0,25 € nettoWstępna wycena jednego wariantu
Es un remake de Bala con escudo de Ukraina, convertido en un gancho para colgar abrigo, llaves...
Wydruk około 2,76 €–3,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You may chose between 2 characters ( Jo Prusa and Baby Dragon ). All models are designed to be suportless so you dont need them for succesful print.
Support me: Post a Make and Comment PayPal Venmo: @paulorfo Cash App: $paulorfo ------------------------------------------- News: 12/15/2023: “ Testris_TS_… ” is a travel size version at 50% of the original size. NOT TESTED. Please let me…
Juega el Tetris en la vida real, esta vez evitando perder el equilibrio
This is a stacking game where players carefully place complex 3D pieces onto a growing structure, judging alignment, weight distribution and stability. While the goal is to build higher than your opponents, pushing the structure too far…
For single player this simple balancing game has one main goal… see how many dinos you can stack on the wobbly base. With two players you will need two of each dinosaurs printed. Each player will start with 10 dinosaur pieces. Then one…
I found this great game of Tetris to play with the grandkids. printed it and loved it. I printed 6 sets of pieces which is plenty. I designed a box to put it all in. You don't have to print it in colors, but if you have a BambuLab or…
I made a very simple box/case for the game with integrated stand. The existing game board will act as the case cap/lid without any modification requirements. There is enough space between the game board and the box to pick the figures out…
If you like my model, you can reward me by purchasing it on Cults3D at the link below: https://cults3d.com/en/3d-model/game/balancing-hat-only-40-minutes-print
This is an improvement on the rather popular "Floating Cup (smoother look, foolproof assembly)", https://www.printables.com/model/164778-floating-cup-smoother-look-foolproof-assembly . See that model for some notes and directions of how…
Just quick remix. Scaled down to 85 percent of original. To spice things up a little use different colors in layers while slicing (M600 command or pause-change filament-resume). Print 4 pieces of every tetris-piece, it will fit easily…
This is my “Ultimate” version of this game, with quite a few new play possibilities to make it even more fun. Hope you will enjoy it, and please let me know if you've ideas to improve it, I'll design the parts. Please note that I won't…
Here is the original part : https://www.thingiverse.com/thing:3888958 Enjoy!
Little acrobats balancing and stacking game. Printing with more infill will result in heavier acrobats that are easier to stack. Acrobats available with and without smiling face. Can be scaled down for a mini desktop stacking game. Have…
Print each furniture piece at least 4 times . Use any colors you like for better visibility and fun. How to Play Place one piece as a base. Stack furniture pieces on top of each other to create a balanced structure. Same-type elements…
A Detailed Parts List can be found in the description of the YouTube Video below: This robot does not require any supports to be printed. Designed by Kelton Serra (Build Some Stuff) in Fusion360.
If you like the model, please give a like 💟 and post your prints 📸. 💡 Prusa balance game - Darth Vader, Stormtrooper, Mandalorian, Yoda, Dwayne The Rock Johnson, Pinguin, Tux, Snowman, Christmas Tree, Gnome, Santa, Benchy, Pikachu,…
Hi, I created a balancing game with a figure, you stack them on top of each other in the shape of a pyramid, whoever falls down loses. It also comes with a nice box that can hold about 80 figures. Enjoy
Hello, the original author of the model has contacted us to check your remix as it does not meet the license conditions or is not a transformative remix of the original. Since your remix violates the license and rules of the original…
This is a fun and challenging balance Tetris game. The game is simple to play: simply print as many sets of pieces as you need (I printed 1 set per player, but 2 sets work great). Every palyer get one pieces of each type. The first player…
This is my design for self leveling / gyro cup or a MUG holder. You can install on adult walking aid, baby stroller handlebars for bicycles. I was inspired from the design…
Picture this: You're an experienced chess player who has hit a plateau at 500 elo. You feel stuck and bored with traditional chess. Then you think, what if I made chess even harder? Well do I have the game for you! Balance Chess…
Update 25-Nov-2025 Tree and Latches updated to R4. Added internal feature to the Tree to increase strength. Thanks to Slant3D for the idea. 23-Jan-2024 Uploaded game pieces with a round base. Original hex base game pieces will also fit .…
Self-balancing bat, print in place and optionally glue the teeth on (as far forward as possible); have also uploaded a single tooth if you would like the bat to spin. Also included a version with a hole to hang the bat, should balance on…
Toolbox/casing for the Tetris Balance game, with or without colors The ‘balance’ have a reserved emplacement in the toolbox lid, it stays in place as it is a tight fit and 3 clips retains it. The tray that holds pieces is removable to…
This small santa hat has a special trick: it balances! Printing Instructions (Standard): I recommend PLA with 0.2mm layer height, 5-10% infill, 2-3 walls, and no supports! Print as oriented. I printed in matte white PLA and colored the…
Compared to original, it has adjusted scale to 150 mm wide base, letters are set in 0,25 mm deep (first layer) and it has added chamfer 1 mm on the all edges.
https://www.printables.com/model/633194-pru https://www.printables.com/model/669446-prusa-balance-game-collapsable/files https://www.printables.com/model/667011-prusa-balance-game-accessories-box-and-two-piece-s I have included: The…
Simple and easy to print without supports Balancing Game Choose your color and enjoy!
Dinosaur Stack is a fun and creative 3D printed game that focuses on balance, patience, and skill. The goal of the game is simple: stack the dinosaur figures on top of each other without making the tower fall. Each dinosaur has a…
I have printed this holder with PETG and it's been working great for months now. Every file is to be printed once, with the exception of the spacers , which you will need 4. Apart from the printed files, you will also need: For the cup…
parts size adjusted for easier storage
Use Supports, Original Size of STL 30 Cm above. You can scale it if needed.
Saw this in an advert somewhere and thought it'd be a fun little project! Pretty easy to print and the game is self explanatory (whoever tumbles the pile first loses). The original also has cards that tell you what piece to play to make…
Place as much piranhas to the base as you can. Try it by one hand only. Share your best result with friends :)
Storm Trooper: https://makerworld.com/en/models/221166#profileId-239784 Darth Vader: https://makerworld.com/en/models/221163#profileId-239884 --- Commercial Use --- By purchasing this design on Cults , you support my work and receive a…
While traveling with the family, there is a story that the oil is suddenly poured out of the ground, and the head is frog, the tire tire, and the legs.
The Prusa balance game is a great model and a source of much fun. However, it lacks: a box to contain all the parts, and a two-piece base for easy disassembly and storage in the box. This remix addresses both issues. The connector between…
A simple mechanical calculator powered by gravity and trigonometry! Either when teaching a child to do basic addition and subtraction, or when explaining more complex concepts to a physics class, like center of mass and mechanical…
Keil für Fliesen Nivelliersystem der Firma Kubala. Wedge for tile leveling system from Kubala. Klin do poziomowania płytek Kubala Smart Level Print Settings Printer: DIY Prusa Rafts: No Supports: No Resolution: 0.2mm Infill: 100% Notes:…
Rescaled a popular gnome figure and placed on a hex tile to be used with Prusa Balance game. Original gnome: https://www.printables.com/model/178691-gnome-christmas-tree/ If you need some matching hex baskets to catch and store your…
Short and fun balance game. For two or three players. Roll a dice and see what object you need to put on the unstable base. The one who fails to put the object on the base and keep it stable lose. The youngest player decides who starts.…
My daughter asked for a Barbie Gymnastics set from Target for her birthday. After purchasing the one she wanted ( https://www.target.com/p/barbie-174-careers-gymnastic-coach-dolls-playset/-/A-52607245#lnk=sametab ) and realizing how…
The LOVE Balance Sculpture is a modern decorative piece that blends minimalist design with pure emotion. 3D printed with a matte red finish, it transforms the word “LOVE” into a balanced three-dimensional structure full of movement and…
This is a remix to address some issues I had with the original design. Printing info: PLA 0.4mm nozzle 0.20mm layer height 15% infill [UPDATE 6/22/2026] Per request, here are the diameters for the steps on the original model as posted.…
Build Info: Parts can be printed with PLA. No supports needed Worth mentioning: The blocks can be printed individually or as a kit. The number of blocks required to fill the optional storage container is shown in “( )” in the model name.…
Printed in 0.15 mm layer from Prusament: PLA Lime Green (Blend) PLA Prusa Orange PLA Lipstick Red PLA Pearl White (Blend) PLA Pineapple Yellow PLA Royal Blue (Blend) PLA Prusa Galaxy Black PETG Clear All types of blocks are 4x.
Ocean-themed stacking and balancing game Made for all ages – kids, adults, families, makers Perfect for game nights, classrooms, office desks, or chill solo play Easy to print, no supports needed Mix colors, scale parts, or paint your own…
The players take turns stacking the stones. When the tower tips over, you add up the number of stones. After several rounds, the total is added up. The player with the fewest points wins.
Inspired by the original Balancing Acrobats , this redesign takes the challenge to a whole new level. While the original focused on vertical stacking, this version introduces wild, multidirectional chaos. The unique geometry allows you to…
I tried to make the size so that the weight is the same if you use similar infill for the dragon and mario. Needs supports. Edit: Added a V2 for the model which makes mario better fused with the bottom pad. Also makes him bigger to be…
I added the base that goes with the cone. I lost it years ago and had been using a nail to balance the cone. I forgot about the base when I made the first model. Printed with no supports in about 90 minutes.
Baby Yoda: https://makerworld.com/en/models/221166#profileId-239784 Darth Vader: https://makerworld.com/en/models/221163#profileId-239884 --- Darth Vader Character --- !!! NO SUPPORTS NEEDED !!! U can print that without support, using…
This is an easy-to-print platform for supporting the balance wheel during a watch service. It is similar to Bergeon item #7990 “Support for Cleaning the Impulse Pin”. In addition to allowing for cleaning of the roller jewel, it makes a…
A new spin on an old idea. Indulge in this entertaining and engaging balance game that draws inspiration from Tetris. Begin by printing out your game pieces (it is suggested to have 6 sets, but some players may find that 8 or more work…
This is a remix of the Balance Tetris box to fit the Ender 3 build plate as well as to enable multi-colour with inserts of the letters and the bottom of the holes for the pieces. This model uses less material while able to fit the same…
3D Tetris Balance is a physical tabletop game that combines spatial reasoning, balance, and a bit of luck. Inspired by classic Tetris shapes, players take turns placing lightweight, open-frame pieces onto a curved see-saw base. As the…
I just took paulorfo's dice and replace the inverted z with the v piece of Bhorian's balance Tetris game
The object of this game is to build the tallest tower by fitting the elephants and the balls together without letting them fall HAVE FUN! Printing tips: PLA, 20% infill , 0,25mm layer height
Balahara, the Sand Sea Wyvern of the Windward Plains. They are “Desert-dwelling leviathans that build carapaces out of the fulgurite formed by lightning strikes. They use their flexible skeletons and serpentine bodies to create quicksand…
Added another layer to the original design to hold the individual Battery strap strongly in place - minimizing potential damage to the FC/O4 air unit during a crash. Added a version that holds the XT30 cable firmly in place, away from the…
I wanted to make some fun pieces for the balance game. They are the same height as the Joe Prusa piece. They vary a little, but are within 0.50 grams of each other. PLA 10% infill with 3 walls No Supports
Updated 5/29/26!! - Changed shaft interface to reduce error in assembly - Increased thickness of parts to increase durability Use this tool to help balance the ratchet on your Beyblade X beys. I saw too many people selling a simple…
Request for some friends Sugestion for printing Infill: 15% Layer Height: 0.20mm Supports: Yes, organic - Support on the build plate only Seam: Rear Brim: Yes If you like my work consider Buy me a coffee 😊
Personally, this is my favorite spinning balancing bird model as it looks clean and is easy to print. Print upright with supports (raft/brim recommended) . Birdwithcavity STL file allows you to hot glue a counterweight like a coin into…
Bigger base for more fun Pack of 21 tetris cube shapes New tetris cube shapes for off-axis play Bigger base optimized for Prusa MINI (90% scale) More shapes, more fun
This Marble Balance Maze recaptures part of my (and maybe your) childhood! Inspired by the original Brio marble labyrinth game, players navigate their marble from the start to the finish, winding around obstacles and pitfalls along the…
Having printed the Prusa balance game board in brown and green to look like a tree, I decided I needed some tree dwelling creatures to finish the game off. I couldn't find any ready made game pieces along that theme, so opted to remix a…
I took the image of the Stencil Joker from Balatro and made a printable version. It was the simplest to do as the design was quite simple. I printed this with a 2-head XL. You could probably modify it so it can be done with a filament…
Meine bärenstarke selbst erstellte CaliBär Figur als Spielfigur fürs Prusa-Balance-Game!
Use case Shows the wind direction precisely, even if mounting pole is not perfectly upright. To achieve this, the vane and the counter weight are carefully balanced. Printing Print all parts in the uploaded orientation. To achieve a very…
Pieces for a balance game based on the original Tetris game. This is a remix of the original model by paulorfo to include these newly re-designed game pieces. The chamfers make the pieces fit together a little bit nicer than they once…
[FR] La pièce présentée est un dé à 20 faces équilibrés couramment utilisés en jeux de rôles, jeux de stratégies ou autres jeux de sociétés. Il n'y a pas d’instructions de montage, l'ensemble est composé d'une seule pièce individuelle.…
The set includes three different weight sizes, offering a variety of interactive educational activities. This engaging model teaches the basics of weight measurement and balance in a playful way. Print instructions Common to all parts :…
Protective caps for Li-Po balancing connectors - JST-XH 2.5mm. Available sizes: 2S, 3S, 4S, 5S Additionally, more sizes can be made by editing the original STEP file (slicing in the middle and adding/subtracting 2.5mm). Please print a…
100% box has been tested, and works very well. Update: I cobbled together a box for the larger base (Base 2). It is ready, but too big to fit on my school printers. If you decide to print this one, let me know if it works nicely!
Simple Game Dice for the Prusa Balance game. Simple Rules 1 > Put one player on 2 > Put two players on R > Remove any player M > Move any player
Printed with 20% of infill, 2 walls and they have the same weight
Print base and some cat models. You can modify cat size in slicer to have more possibilities. When printed try to place as more cats you can to the base. Try to do it just by one hand. Who place more cats to the base is winner. Happy…
Challenge your imagination and creativity with these cute fish. How many fish can you stack without falling in under 20 seconds? recommended quantity to print: 12 important! the files only contain one or three fish, in your laminator…
Balancing eagle gently floats effortlessly as it balances on the tip of a push-pin. Decorate your area with a touch of elegance as this eagle in flight seems to glide in its still state of peace. Print the eagle and push pin holder all in…
![[EN] Balanced Dices 6 / [FR] Dés 6 équilibrés](https://media.printables.com/media/prints/88069/images/930523_7380538e-f5e0-4652-a846-15a865e66893/de6-pipe.jpg)
![[EN] Balanced Die 20 / [FR] Dé 20 équilibré](https://media.printables.com/media/prints/86729/images/918647_f353152c-5e2a-4a31-88bc-38c842f89bc9/de20c.jpg)
