15 662 modeli
Found with a heavy plate that I wanted to display that the original felt like the balance was off and could easily fall over when bumped. I have copied the summary from DanRom624 (original from Thingiverse:…
Wydruk około 1,72 €–2,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to put all my Dremel accessories in the Dremel box, included in my new set, but the sponge inserts wasted soooo much space. So I decided to make it fit. First I tried to design a 4 piece design, but that would lack modularity, so…
Wydruk około 1,69 €–2,07 € nettoWstępna wycena jednego wariantu
Edit: I also tried a different approach here: Let's build...Drybox v2! by Ren | Download free STL model | Printables.com You can find many single parts, videos or blog posts regarding dryboxes. When I realized I have stringing problems…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
This model has been verified for compatibility using a GoPro Hero 4 case. It is not an official GoPro part — geometry recreated for functional interoperability. Dimensions: Diameter (x, y): 29.5 mm Height (z): 17 mm Hole size: M5 screw &…
Wydruk około 0,56 €–0,68 € nettoWstępna wycena jednego wariantu
Some not required material (in my opinion) was removed to decrease printing costs and duration further. Main features: Two magnets for each segment with press fit (6x2mm). Minimized material costs, the gridfinity boxes are fixed only by…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
Darth Vader Bust - on a base with lettering Printer : Flsun V400 layer height : 0,1 line width : surface 0,4 ; inner outer wall and filling 0,6 Scale 100 % no support ; Lightning infill 25% ; print time ~ 14 h JAYO PLA Meta Black…
Wydruk około 9,67 €–11,82 € nettoWstępna wycena jednego wariantu
This is a remix. I didn't design this nice model, I've only converted it in STL and added a base. The original model and author here https://sketchfab.com/3d-models/spiral-a4e84079db884dddbc2e980b44ce8cfd kylie Printed @0.15mm with PLA:…
Wydruk około 8,48 €–10,36 € nettoWstępna wycena jednego wariantu
Attached is 25, 32, 40, 50 and 60 mm blank miniature bases. Also attached is the SCAD file if you want to modify. Want another dimension? Alter the width value of the OpenSCAD file and make your own. Printed at 0.3mm for speed. Round…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
I made these to test whether Z-Hop has any effect on knocking down fragile parts. However I soon realised that these very simple parts are hilariously hard to print. So, give them a go, and post a make if you succeed (or fail!) and maybe,…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Replica of the genuine Fidlock magnetic base. Works just as well as the original. -Model has two internal cavities to drop in magnets during print then print over the top. Magnet size is 12x3mm. Careful when dropping in the magnets as the…
Wydruk około 1,07 €–1,31 € nettoWstępna wycena jednego wariantu
Holder for baseball cap.
Wydruk około 0,29 €–0,36 € nettoWstępna wycena jednego wariantu
**************** If you download 💾 or collect 🗄 please hit the LIKE 👍 button. 😀 If you print 🖨 it post a picture 📷 / MAKE ! 😄 Let me know how it works for you.❔ 🙂 Don't forget you earn Prusameters🧵 when you post a MAKE ! ****************…
Wydruk około 2,08 €–2,54 € nettoWstępna wycena jednego wariantu
This is just test Gcode, for more info (userguide) please look at: https://3dlabprint.com/shop/cessna-152-based-trainersport-plane/
Wydruk około 4,68 €–5,72 € nettoWstępna wycena jednego wariantu
Manu Militari (witch translate to “With a military hand” in Latin, meaning using military force or force of arms) is an hex-based terrain tiles system that can be used for wargames, strategy games, RPGs and so on… The tile system At its…
Wydruk około 4,44 €–5,43 € nettoWstępna wycena jednego wariantu
Globe stand is compatible with all lamp globes by @FritzPeppone published here: https://www.printables.com/model/1087513-solar-system-lithophane-planet-lamp-collection Compatible with E27 bulb socket adapter like this one found at OBI:…
Wydruk około 6,12 €–7,48 € nettoWstępna wycena jednego wariantu
Gridfinity base grid for Festool Systainer 3 toolbox. Print 4 pieces and glue together or just in one piece if you have a large printer.
Wydruk około 3,39 €–4,14 € nettoWstępna wycena jednego wariantu
Goal of the design: I got tired that my Arduino prototypes were so difficult to move, and that the jumpers were always being ripped out due to the board being separate from the breadboard. The goals for this design were; Easy attachment…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
Easy tool for measuring TCP and Base on robots. Positioning with magnets. Thanks to strong magnets and lightweight plastic, there is no displacement when touched. Each attachment has a screwdriver hole in it, in case the thread in the…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Snap-lock pin for the screw together gridfinity baseplate by Kyle Warren. Itself Based on ZackFreedman design . Kyle himself describes his baseplate as “overkill”, and while I love the model, I don't quite need the rigidity of screws; I…
Wydruk około 0,88 €–1,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Płyta bazowa LEGO w różnych rozmiarach jest gładka od spodu, dzięki czemu można ją przykleić do dowolnej powierzchni. Rozmiary płyty bazowej: 12x8 6x3 6x4 5x4 5x3 Oczywiście na płytce można zbudować dowolna rzecz. Wypusty zostały tak…
Wydruk około 3,50 €–4,28 € nettoWstępna wycena jednego wariantu
Cardbox with dividers. no supports needed.
Wydruk około 10,86 €–13,27 € nettoWstępna wycena jednego wariantu
Storage container with swiveling drawers made out of empty Prusament spool. Thanks to @Yell for the Prusament Spool CAD model that helped with the creation of this model. You'll need 2 of each drawer type and 2 pins. You may need to look…
Wydruk około 17,36 €–21,22 € nettoWstępna wycena jednego wariantu
This is a simple filament dust collector/cleaner for the Prusa i3 MK Filament Guide ClipOn base. Fits all Prusa i3 MK frames. Uses an ordinary household sponge - cut it to a small cube, as shown on the photos. Easy to replace when needed.…
Wydruk około 0,29 €–0,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This drawer is an add-on for David Warboss' excellent Prusa Mini Base . The drawer is now printable on, and optimized for, the Prusa Mini. Surprisingly, it is almost as big as my original version. The design is basically a mix of what…
Wydruk około 17,08 €–20,88 € nettoWstępna wycena jednego wariantu
I wanted some suitably futuristic bases for the tabletop game Infinity and wasn't happy with anything I could find. So I designed these simple hex bases! 25mm, 40mm, 55mm, 70mm are all included to cover Infinity models. Also 32mm exists…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
If you'd like to support me you can post a make, comment and/or pay me a coffee at PayPal , @paulorfo (Venmo), $paulorfo (Cash App) -------------------------------------------- UPDATE | 11/16/2024: "Lansky_Large Base.stl" file uploaded…
Wydruk około 1,99 €–2,43 € nettoWstępna wycena jednego wariantu
Here is a Gridfinity baseplate designed to save filament and magnets. It still uses the default 6x2mm magnets in the same positions and is compatible with other gridfinity bins and models. There is an included STEP file so you can make it…
Wydruk około 5,13 €–6,27 € nettoWstępna wycena jednego wariantu
A quick, simple model of the video game character Kirby, made from scratch in Tinkercad. It's very easy to print. The Warp Star base and pedestal are separate and print without supports. Feel free to paint it in your slicer and print it…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
This design was requested by co-workers of my wife. I had seen some made of wood but haven't seen any for 3d Printing. This is a 2 color design the base is red and the top is white for my design. Any questions? Feel free to message me.
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
Freddy FazBear FNAF - Based Joins Dummy 13
Wydruk około 1,39 €–1,70 € nettoWstępna wycena jednego wariantu
Wall mount for baseball bat Large mount ⌀ 48mm Small mount ⌀ 28mm Based on https://www.printables.com/model/50407-baseball-bat-wall-mount adapted for different sized bat. Designed using Adobe Illustrator and Autodesk Fusion 360.
Wydruk około 2,63 €–3,22 € nettoWstępna wycena jednego wariantu
Flat base for Festool Systainer 3 toolbox. Print 4 pieces and glue together or just in one piece if you have a large printer.
Wydruk około 3,38 €–4,13 € nettoWstępna wycena jednego wariantu
A couple of mounts for the Arduino Uno or similar models. I got the initial idea from here and designed the stuff in OnShape. You can put the Uno straight on the mount and use it like that, or fasten it onto somewhere with the mount. Also…
Wydruk około 0,47 €–0,57 € nettoWstępna wycena jednego wariantu
Replica of the baseplate of the Makita trimmer base 196613-4. As far as I can tell, it is not possible to buy the base plate as a separate replacement part, you have to buy the whole unit: Makita (German):…
Wydruk około 1,24 €–1,51 € nettoWstępna wycena jednego wariantu
A simple 12x12 plain and space baseplates compatible with LEGO. Inspired by classic space sets from the 80s. Perfect for displaying micro-scale models and Minifigures. Printed with 0.20 layer height. Do you want a more detailed print? Try…
Wydruk około 1,57 €–1,92 € nettoWstępna wycena jednego wariantu
Baseball bats puzzle. Can be used as a ball stand. When printing, you need to match the flow to the plastic. So that the parts fit tightly when assembled. I came across a video on YouTube with a similar metal puzzle. I decided to make my…
Wydruk około 6,79 €–8,30 € nettoWstępna wycena jednego wariantu
Fits base game with first expansion. There is slot for 3D Printed figurines.
Wydruk około 2,50 €–3,05 € nettoWstępna wycena jednego wariantu
Wanted to put my upgraded Mini on Squashballs for noise reduction. I didn't modify the inserts to continue working with the USB drives and USB port since i did not use those features and had some trouble with Fusion360, so i just made…
Wydruk około 7,66 €–9,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print Settings: Use your fine tuned settings made for your printer Infill won't make a difference No supports are needed Be sure to print in proper orientation Comments: Thanks for downloading, happy printing!
Wydruk około 5,76 €–7,04 € nettoWstępna wycena jednego wariantu
baseball bat consisting of two pieces for better printing and the opportunity to enlarge the model to your liking and the ability of the printer. It is printed from PETG, then the product is stronger and can be etched with chloroform for…
Wydruk około 1,45 €–1,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Designed to be a sturdy tray to hold any 32mm round base models. 4 finger holes in the middle to help pick up the tray and to lessen total weight.
Wydruk około 3,70 €–4,52 € nettoWstępna wycena jednego wariantu
My friend visited me on his vacation and one night we went to a baseball game. It was his birthday and he got a gift package with a signed baseball. We wanted to create a holder together. We decided on making a small, low-profile holder.…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Inspired by Djngnear's tabletop tray, I remixed mikeev's mount for the Sunlu S2 to entirely remove the screw holes (with no internal bits left over) and cut it down to fit on a Prusa Mini/+ bed. I also cut the power cord hole to be open…
Wydruk około 6,54 €–7,99 € nettoWstępna wycena jednego wariantu
Horizontal spool holder for hanging filament spools underneath the prusa mini base. It's using the bearing from the spool holder provided with the prusa mini, which makes is spin very smoothly. Quick swap of filament spools with screw-on…
Wydruk około 0,20 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed to mount some custom built baseball bats in my office but I didn't have enough “top down” space. Since width wasn't a problem I designed these hangers that use the weight of the bat and leverage to keep everything in place. The…
Wydruk około 3,43 €–4,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Based on Danol's great design, I've remixed his dock to fit the Anker A8346 version that doesn't have an Ethernet port and does have a power LED, an additional USB-C and the two USB-A ports that are no longer centered and I had to move…
Wydruk około 1,92 €–2,35 € nettoWstępna wycena jednego wariantu
This is a base that has an attached sign on the front of the base. You can add the name of the figure or model that you are displaying. I have included the files in various versions. Fully customizable sign with editable text or you will…
Wydruk około 2,89 €–3,54 € nettoWstępna wycena jednego wariantu
Hi there! This is my own take on a 3-model squad base for 32mm diameter base miniatures. I use these for my older style Blood Angels space marines for Warhammer 40k, but these would work for just about any game using minis on the same…
Wydruk około 2,17 €–2,65 € nettoWstępna wycena jednego wariantu
I created and released a few sets of #NoWalls Dungeon Tiles that use the OpenLock form factor. During development I wanted to try out the 5mm magnetic balls for easy connections without the OpenLock clips. I came up with a small…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
I needed a second base for my older Source hydration magnet clip, so I could easily switch between backpacks. Apparently sometime in the last 10 years these were redesigned and the new ones have a circular “mating” action in addition to…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Stone base | Brick Pedestal | Miniature stand | Display base | Miniature accessory Customize the dimensions for your miniatures. I look forward to seeing your creative setups and photos featuring this base. Have a happy printing time 💛
Wydruk około 0,57 €–0,69 € nettoWstępna wycena jednego wariantu
Baseball Patrick from Spongebob Squarepants.
Wydruk około 2,61 €–3,20 € nettoWstępna wycena jednego wariantu
Remixed version of Gangar that is 1/2 size and with a base added to be used as a pawn or tabletop miniature
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 25% Add a some small Cylinders as Negative Volume for draining Print upside down Scale it as you like :)
Wydruk około 4,45 €–5,43 € nettoWstępna wycena jednego wariantu
1" PEX Arch Base. I cut a 5m LED strip in halve. The PEX needs to be 2.5 meters or about 8'3". The bottom bar are a 5' foot piece of 1/2" PVC. The bases holes show be large enough to fit a X-Connect connector. The screw holes are designed…
Wydruk około 9,92 €–12,12 € nettoWstępna wycena jednego wariantu
This is a storage solution for the classic wargame Command and Colors Napoleonics from GMT games . As the game has three different piece sizes, I have divided them in three trays: Infantry : 180 pieces Cavalry : 77 pieces Artillery and…
Wydruk około 2,43 €–2,97 € nettoWstępna wycena jednego wariantu
Baseball Holder
Wydruk około 0,66 €–0,81 € nettoWstępna wycena jednego wariantu
I needed a box to hold all cards of the HeroQuest base game. The box holds about 110 sleeved cards (2022 Hasbro Edition)
Wydruk około 5,87 €–7,18 € nettoWstępna wycena jednego wariantu
Replacement plug for Spaulding basketball hoop system base. Keeps the water in. Fits snug as it, which is what you want.
Wydruk około 1,08 €–1,32 € nettoWstępna wycena jednego wariantu
Wanted to make some baseplates for my kids... used the scad model from https://www.thingiverse.com/thing:615256/files to get the size I wanted… Made the base a little thicker to stand up to the stresses of 2 toddlers(hopefully) Pieces fit…
Wydruk około 11,10 €–13,56 € nettoWstępna wycena jednego wariantu
Designed to fit the drawers for this Husky Work Table . I believe the 72in version of this work table has the same sized drawers so it should also fit. You'll need to print: 1x Corner Top Left (1) 1x Corner Top Right (2) 1x Corner Bottom…
Wydruk około 0,56 €–0,68 € nettoWstępna wycena jednego wariantu
Cause i have no problems with my MMU2S System, but i really hate the old Prusa Buffer, i decided to upgrade only the Buffer. But for my enclosure i need top loading, cause my filament spools hanging right over the printer. I grab my CAD…
Wydruk około 5,40 €–6,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Fun puny gift for fathers day.
Wydruk około 2,18 €–2,67 € nettoWstępna wycena jednego wariantu
36 holes, two or three colours
Wydruk około 2,22 €–2,71 € nettoWstępna wycena jednego wariantu
These are lego compatible bases for playing Star Wars Legion. Currently attached are the 27mm and 50mm base sizes and I will add even larger ones in the future. These are a part of a set of lego heads and parts I am building so that my…
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
Motivation I recently purchased a P2 Laser Cutter and Riser. One of the first cuts I needed to make was on a long piece of ¼” acrylic to be used as a window insert to which I would attach the exhaust duct from my inline fan. I currently…
Wydruk około 0,86 €–1,05 € nettoWstępna wycena jednego wariantu
Included are STEP file for your CAD tool, or directly the Fusion files. If you like the model as it is, the STL model files and the Slicer files. As a hint i uploaded also the print code made for a MK4. The board frame is hold by magnets…
Wydruk około 1,07 €–1,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These Display bases were designed by me but were created based on MroznyHipis ( @stawiamklocki.pl ) display stands. Base size: 75322 AT-ST Hoth Base - 165x165x6mm 75153 AT-ST Walker Base - 165x165x6mm 75254 AT-ST Raider Base - 165x165x6mm…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
for English see below Bisher habe ich Lautsprecherkabel und Netzwerkkabel aus dem Bühnenbau auf Kartonagen gewickelt. Jeder kennt wahrscheinlich das resultierende Problem: es entstehen Kabelschlingen, je länger das Kabel umso schlimmer.…
Wydruk około 0,59 €–0,73 € nettoWstępna wycena jednego wariantu
two colours, 20 cm
Wydruk około 2,86 €–3,50 € nettoWstępna wycena jednego wariantu
This is an insert for the board game Arcs , by Leder games . It enables you to have all component for the base game and the Leaders and Lore expansion. The Campaign expansion provides already a nice insert but it makes the box massive.…
Wydruk około 2,18 €–2,66 € nettoWstępna wycena jednego wariantu
After delivering 50 RC3s to a local hospital I worked with them to further improve the design to address their concerns. With the RC3 they liked the comfort and its the ability to adjust to any head size but disliked the open top and…
Wydruk około 3,51 €–4,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A tenting wedge for Corne (crkbd) keyboards using this case: https://www.printables.com/model/988253-corne-crkbd-v41-kailh-choc-v1-case-and-plate . Designed to sit in the rubber feet holes of the original case for stability. Doesn't…
Wydruk około 1,78 €–2,18 € nettoWstępna wycena jednego wariantu
A simple baseplate for helping hands. I am using these from Aliexpress; "NEWACALOX Multi Soldering Helping Hand" Threads measure at 12,3mm Fusion file included so you can make your own adjustments :) Printed in Prusament PETG Galaxy…
Wydruk około 3,31 €–4,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I've always wanted base bigger base plates for my RIA 51679, but certain companies that provide them are wishy washy on if they will fit this particular magwell. Plus they are expensive. This one fits the magwell and adds no additional…
Wydruk około 1,04 €–1,27 € nettoWstępna wycena jednego wariantu
This print can also prevent your hockey pucks and baseballs from rolling off of the surface you're displaying them on. It's a very short and efficient print that functions well and has a very simple design.
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Baseball Cap Holder – Wall Mount | 2 Mounting Options | 3D Printable Cap Display Keep your favorite baseball caps organized and proudly displayed with this modern Baseball Cap Holder – Wall Mount . Designed specifically for 3D printing,…
Wydruk około 1,70 €–2,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EXTRA THICK Headlight adjustment base for various GM vehicles. Some vehicles have worn out adjustment base holes, this will have with some of that. Made these to fit my specific needs on a 1992 Camaro. Printed with Glow-N-Dark ABS,…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
base for your rum /whisky /vodka bottle. I used round LEDs with a diameter of 70mm.
Wydruk około 4,78 €–5,84 € nettoWstępna wycena jednego wariantu
Just an osVAC M32 Parkside PWD 30 B1 Adapter :-) based on osVACneo Fusion360 files. Printet with suppport on bed only.
Wydruk około 10,85 €–13,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of The Ultimate Cereal Container Filament Drybox . I split the base in half, so now it is possible to print it on my Bambu Lab A1 mini printer. I also moved the haunches by 6 mm so it fits my cereal box I purchased, but it…
Wydruk około 1,88 €–2,30 € nettoWstępna wycena jednego wariantu
This desk stand for your Pico has a wide base to give it stability, and uses the mounting slot on the remote to lock into place. There's a lot of chamfering for easy handling. Update 2024-01-29: I've added a new style that is slightly…
Wydruk około 1,64 €–2,00 € nettoWstępna wycena jednego wariantu
Build your imagination with the LEGO Compatible Square Base Plate ! Measuring 160x160 mm with a 20x20 grid of studs and a height of 3 mm, this compact base plate is perfect for smaller projects, playrooms, and creative workshops. Whether…
Wydruk około 3,04 €–3,72 € nettoWstępna wycena jednego wariantu
Printed in 45 degrees using PETG, support only in plate. You need a M5 hex Nut
Wydruk około 1,61 €–1,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Some tweaking for the rim on add slot to have more grip inside the tire and make it bigger than the original for about 3mm so can get more tight i use the 1.9/107mm inch tires Hope this help Big Thanks for the 3d sets
Wydruk około 4,61 €–5,64 € nettoWstępna wycena jednego wariantu
Small change of the layout in the drawer base part. It is now symmetrical and there is no divider under the hole of the plate.
Wydruk około 4,61 €–5,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a customizable base that works with any of Flowalistik's Trophy set cups. Base and plaques are easy to scale. I found printing everything at 300% made for an ideal trophy size. Once you print the base and plaque, head over to…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
More photos to come once I have printed and assembled the model.
Wydruk około 2,10 €–2,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Base for the roborock s6/s5 max, protects the floor from the moist cloth. Use PETG or PLA STANDARD 0.2mm STRUCTURAL This base is 5.2mm high = easy docking
Wydruk około 2,63 €–3,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Battery tray bottom for 1982-1992 Camaro and Firebird with battery on Passenger side.
Wydruk około 10,00 €–12,22 € nettoWstępna wycena jednego wariantu
For the regular maintenance of my Roborock S8 i needed a simple solution to protect the laser tower while the robot is laying upside down. Technical Data: inner diameter: 90mm angle: 8° height at the lowest point: 22,5mm Print settings:…
Wydruk około 1,19 €–1,46 € nettoWstępna wycena jednego wariantu
Simple model buil with thinkercad. I tested with PLA and with a Creality Enver V3 se. I made 3 models for my 3 Mini PCs dreamquest at home. Any question, send me a email with the subject: “Mini-PC Dreamquest Fan” to [email protected]
Wydruk około 1,93 €–2,36 € nettoWstępna wycena jednego wariantu
Inside the container are ridges to see how many powder you used. You can use my cap, or you just can use every standard PET bottle cap. If you love this design and want to see more fun projects like it, consider joining my club on…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
Le lancement de fusées à eau est une activité ludique, mais elle peut être dangereuse sans un minimum de précautions. L'utilisation d'une base sécurisée est donc nécessaire. En voici une réalisable avec notre imprimante 3D La retenue et…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Eureka Mignon Fork Remix Upgrade your Eureka Mignon grinder with this custom fork designed for use with a tilted bed in single-dosing operations. This remix of TrafficBroker's original design ensures a secure and precise fit for…
Wydruk około 0,68 €–0,83 € nettoWstępna wycena jednego wariantu
Add a color change at the appropriate height to make the numbers more visible. Glue some washers or similar into the center to let the magnetized minis grab on. The numbers are meant to be placed on corresponding character sheets. The…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
Get creative on a smaller scale with the LEGO Compatible Mini Base Plate ! This 80x80 mm plate features a 10x10 grid of studs and a 3 mm thickness—perfect for compact projects, quick builds, and portable fun. Ideal for kids, workshops, or…
Wydruk około 0,76 €–0,92 € nettoWstępna wycena jednego wariantu
25mm industrial bases, that fit my Miniature Painting Handle and Base Set Miniature Painting Handle and Base Set https://www.thingiverse.com/thing:6247736 Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes…
Wydruk około 0,47 €–0,57 € nettoWstępna wycena jednego wariantu
Gridfinity base mount on 40x40 extrusion panel. Print in 45° angle and use default support.
Wydruk około 0,75 €–0,91 € nettoWstępna wycena jednego wariantu
Turntable platter for dyi turntable project. Belt driven Designed gimble headshell and pivot for gimble join tone arm base to motor base with rubber/foam tape to isolate motor noise from tonearm base or make wooden base and use pre-made…
Wydruk około 2,30 €–2,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET
