Wyniki wyszukiwania: batterie

Sortowanie

1271 modeli

P
PrintablesCAD-Guy

Customizable & stackable beer crate for all types of batteries

Customizable and now also stackable beer crate for all types of batteries: The AA-crate can hold 12 Batteries The AAA-crate can hold 20 Batteries The 9V-crate can hold 5 Batteries The 18650-crate can hold 6 Batteries but is 18mm higher…

Pobrania
98 219
Polubienia
23 532
Ocena
4,92
P
PrintablesES_Models

Drawer Battery Box AA & AAA + storage for empty batteries

!! ATTENTION You can't scale the model as the battery size needs to be kept. I would suggest to do min. 4 top layers as I only used 2 which definitely is not enough as you can see on the pictures. For the infill I did 8% Grid. You can go…

Pobrania
771
Polubienia
121
Ocena
5

1S LiPo Case - Battery Case for 450/550 mAh batteries

My daily use 1s LiPo battery case. Very lightweight at only ~35g per case. It fits any pocket. I can keep track of used and unused Lipos by taking new ones from left to right. It does fit the charger/Lipo-checker from BetaFPV. 450 and 550…

Pobrania
641
Polubienia
67
Ocena
5
P
PrintablesLogan

Batterie Adapter AA zu BABY-C

Einfacher Adapter um AA Batterien in Geräten für Baby-C Batterien zu nutzen. Die Hülse kann über die Akkus gesteckt werden, und in den BABY-C Schacht gelegt werden. Ist nur eine Notlösung für den Fall, dass gerade keine Passenden Akkus…

Pobrania
470
Polubienia
33
Ocena
4,86
P
PrintablesSooVirtus

Batteriehalter Bierkiste AA & AAA

Meine Settings sind noch nicht perfekt, kann sicher auch mit weniger Zeit- und Filament gemacht werden :)

Pobrania
433
Polubienia
13
Ocena
4,5
P
Printablessternli27

DIY Makita Bosch 18V Battery Holder Receptacle Socket for TS100 and TS101 Soldering Iron Batterie Lötkolben

18V Makita Battery Adapter: See my design here https://www.printables.com/model/436132/ 18V Bosch Professional Battery Adapter: See my design here https://www.printables.com/model/427974/ 1x Power Switch: Switch size 21 x 15mm Front…

Pobrania
343
Polubienia
128
Ocena
5
P
PrintablesPatrik

Gridfinity bins for CR2450 batteries

Gridfinity battery bins for CR2450-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 5 batteries. A 1x2x4 bin that fits 10 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…

Pobrania
321
Polubienia
21
Ocena
5
P
PrintablesJorge

Storage Tree - Leaf for Batteries

Introduction This module is part of the Storage Tree project . In case you've come across this model and are unsure of where it fits or its context, let me bring you up to speed... What is the Storage Tree or Modular Storage Tree. What…

Pobrania
248
Polubienia
66
Ocena
5
P
Printableswmkrly

Swatch Saver - Tool for Changing SWATCH Watch Batteries

The Swatch Saver tool is designed to make changing Swatch watch batteries both easy and safe. It features: a tweezer with tips optimized for holding watch batteries a flat, rounded end matching the thickness and diameter of notches in…

Pobrania
231
Polubienia
29
Ocena
5
P
PrintablesPatrik

Gridfinity bin for AA and/or C batteries

A compact stackable Gridfinity 2x2x9 with two partitions, each partition fits 20 AA batteries or 6 C batteries. It is not ideal for C batteries as the batteries can be hard get when the partition is full. The base box is generated with…

Pobrania
178
Polubienia
21
Ocena
0
P
Printablesbenoitmeunier

Over-Engineered BOYA Lavalier Microphone & Batteries Holder

Boya BY-M1 might be the perfect starter microphone, but the chord is much longer than I’ll ever need. And if you have one, you know you need to carry extra batteries. So, I over engineer with this #3dprint wrap where the mic and the audio…

Pobrania
139
Polubienia
28
Ocena
5
P
PrintablesPatrik

Gridfinity bin for 45 * AAA and 4 * 9V batteries

A compact stackable Gridfinity 2x2x9 that fits 45st AAA batteries + 4 st 9V batteries to avoid wasting space. The base box is generated with the Fusion 360 GridfinityGenerator,…

Pobrania
118
Polubienia
12
Ocena
5
P
PrintablesNerrian

CR123 batteries to 18650 adapter

The model should be printed in vase mode. Only 2.4gr / 0.79m of PETG is required to print it.

Pobrania
111
Polubienia
18
Ocena
0
P
Printablescomartist

Battery Organizer Tray for 111 batteries

This is a battery organizer. I wanted to organize my batteries. So I designed a battery holder to store different batteries. The battery organizer can hold 111 batteries. Works great for AA, AAA, 9V, A23, LR14, HR20, CR2430, CR2032,…

Pobrania
106
Polubienia
12
Ocena
0
P
Printablesdick

Gridfinity holder for Ring batteries

A container for Ring batteries, in the style of Definitive Collection of Battery Holders (Gridfinity, Stackable & Labelled) by xavierly (although this one is not stackable!) It holds two batteries in a 1x2 Gridfinity container. The base…

Pobrania
86
Polubienia
5
Ocena
5

AAA batteries stand

2x 15pcs AAA. Printed on PLA, speed.

Pobrania
85
Polubienia
10
Ocena
5

Crate for Li-Ion batteries 18650

Crate to keep your batteries organized.

Pobrania
76
Polubienia
25
Ocena
5
P
Printablestom

Sammelbox für leere Batterien/ Collection box for empty batteries

Eine einfache Box mit Deckel zum Sammeln von leeren Batterien, die später fachgerecht entsorgt werden. Abmessungen: 100x100x75 mm Translation: DeepL A simple box with a lid for collecting empty batteries, which are later disposed of…

Pobrania
75
Polubienia
8
Ocena
5
P
PrintablesMuad´Dib

Krabička na 4 AA baterie (Box for 4 AA batteries)

Krabička má oboustranně použitelné zasouvací víčko. Z jedné strany je nápis plné a z druhé strany prázdné. Takto se snadno rozpozná, zda se baterie v krabičce musí nabít nebo ne. The box has a retractable lid that can be used on both…

Pobrania
60
Polubienia
5
Ocena
0

"Ammo Box" for spare Batteries

Our spare batteries used to be in broken original packaging or in reusable ziplock bags. I decided to design this Ammo Box styled rugged box to keep them nice and organized. Batteries Size: AAA AA D Recommended print settings: Material:…

Pobrania
55
Polubienia
15
Ocena
0
P
PrintablesMark Makies

Battery Holder for a popular brand of power tool batteries in Australia

I have a plethora of power tools in the farm shed, workshop and office. With these, collected over many years of renovating, comes a number of battery capacities at 18V, ranging from 2 - 6 Ah, as well as numerous charges. Why not use…

Pobrania
50
Polubienia
10
Ocena
0
P
Printablespetfae

battery cover Batterieabdeckung Simson S51

Das ist eine Batterieabdeckung für eine S50 oder S51. Ich habe das Model mit Fuzzy Skin gedruckt, deshalb die aufgeregte Oberfläche .

Pobrania
48
Polubienia
8
Ocena
0
P
PrintablesMatthew_Chvojka

Parkside X 20V Team batteries HOLDER - Wall Mount

Tired of your Parkside batteries lying around and cluttering your workbench? This practical and sturdy 3D printable holder is the perfect solution to bring order to your workshop or garage! Designed to securely mount your Parkside 20V…

Pobrania
41
Polubienia
3
Ocena
0
P
PrintablesWalde

Batteries Inserts / Einsatz für Batterien

Deutsch: Dies sind nur die Dateien für die Einsätze, die Dateien für die Box selbst sind vom Original zu nehmen. Einlage-AAA.stp und Einlage-9V-AAA.stp werden verwendet, damit alle Batterien dieselbe Höhe haben in der Box. Ich habe den…

Pobrania
38
Polubienia
9
Ocena
0
P
PrintablesStudi_Ha

Remix des minimalistischen Knopf-Batterie-Schlüsselanhängers

Danke an @JanK, für die Idee! @Flexiblerer Verschluss Nocken. In 2 Teilen in PLA ohne Stützen, jedoch mit Kragen um 312_b.stl. @Der Kaminsims kann nur in eine Richtung zusammengebaut werden. @Bezeichnung 312 zeigt, welche Seite oben ist.…

Pobrania
36
Polubienia
4
Ocena
5
P
PrintablesThomas Heuser

Batterie case lid - Batteriefach Abdeckung - Kosmos Easy Elektro Start

Fit is tight but perfect :-) My first drawing with Fusion 360 Sooooo happy about it. I had to work very precisely to meassure the two small nipple on one side and the hole for the screw on the other side. Did fit with first try. Well,…

Pobrania
24
Polubienia
1
Ocena
0
P
PrintablesPacho_z3D

Battery box for flat 4,5 V or 4 x AA batteries (in battery box) / Krabička na plochou baterii 4,5 V nebo 4 tužkové (v boxu)

Battery box for oldschool doorbell. For 1x flat 4.5 V or 4 x AA batteries (in battery box). Upper partition for separating + and - of flat battery. There is also a hanger for an Allen key BOM: 2x M3 square nuts (same as Prusa using) 2x M3…

Pobrania
23
Polubienia
3
Ocena
0
P
PrintablesMartin

Storagebox for recharchable Batteries (AA & AAA)

AAA Batterystorage can contain up to 30 recharchable Batteries. With the frame you can mark the charged and you have a visible difference to the uncharged ones. Same for the AA Batterystorage, but this one can contain up to 36…

Pobrania
22
Polubienia
5
Ocena
0
P
PrintablesFasTyArt

Protection de batterie cigarette électronique

Protection pour batterie de Ø18 x H65

Pobrania
19
Polubienia
5
Ocena
0
P
PrintablesOldCoder

Battery Heat Switch mount for BattleBorn Batteries

Plastic mount for the switch supplied with heated BattleBorn lithium RV batteries to enable thermostatically controlled battery internal heaters. I used heavy duty double sided tape to secure it to a battery. I printed it with PETG, 0.20…

Pobrania
16
Polubienia
0
Ocena
0
P
Printablesdym801

Recycling bin for AA and AAA batteries (MMU)

Recycling bin for AA and AAA batteries (MMU) khaki green white

Pobrania
15
Polubienia
2
Ocena
0
P
Printablesvalentin.didot

Makita support de chargeur de batterie simple DC18RC Fixation murale

C'est un support pour chargeur de batteries 18 volt de modèle DC18RC. Ce support ce fixe au mur grâce à 6 point de fixation pour vis de diamètre 4.5. Il est recommandé d'utiliser une attache de collier afin de le maintenir sur le support,…

Pobrania
13
Polubienia
2
Ocena
0
P

45 Cal 1911 (Rebored) for Batteries

I added support to the design.

Pobrania
12
Polubienia
2
Ocena
0
P
PrintablesPCFuzzy

Batteriefach für Albrecht AE 2990

Batteriefach für den Albrecht AE 2990 AFS, Halter für die 4x 18650 Akkus braucht man noch extra, den elektrischen Anschluss muss man ebenfalls herstellen

Pobrania
10
Polubienia
0
Ocena
0

Ponto 4 hearing aid batteries organizer

This is an organizer for batteries for BAHA hearing aid box PONTO 4. An arrow added to indicate used battery place. Try to use smaller nozzle (I have used 0.6mm) for better fit.

Pobrania
8
Polubienia
0
Ocena
0
P
Printables3uDo

Halterung für Batterie-Pack | Battery pack holder

Keine Stützen notwendig. Befestigt habe ich es mit doppelseitigem Klebeband. No supports necessary. I attached it with double-sided adhesive tape.

Pobrania
7
Polubienia
0
Ocena
0
P
Printablesmbit

Tool for working with Pylontech LV batteries and others using the SurLok QLB connector ( Pomůcka pro práci s LV bateriemi Pylontech a ostatními používající konektor SurLok QLB)

Tool for working with Pylontech LV batteries (external charging and discharging - 2mm test probe diameter) and other batteries using the SurLok QLB connector…

Pobrania
6
Polubienia
0
Ocena
0
P
PrintablesCAD-Guy

Stackable & labeled beer crate for batteries

Stackable and now also with labels: beer crate for batterie and accumulator storage. The AA-crate can hold 12 Batteries The AAA-crate can hold 20 Batteries These crates are to 100% compatible to my original files. The Bottom is universal,…

Pobrania
7484
Polubienia
1473
Ocena
4,9
P
Printablesid10tapproved

Gridfinity Stackable Battery Storage for Cylindrical & 9V Batteries (AA, AAA, AAAA, C, D, CR2, CR123, MN21/A23 & 9V)

Update on Jan 25, 2026: Partial Height Bins are now available for CR2 & CR123A batteries. AA and AAA bins have also been revised to have an additional compartment. High-capacity bins have also been added. Gridfinity Stackable Storage for…

Pobrania
5998
Polubienia
2314
Ocena
4,97
P
Printablesbaua1356

Battery Crate Batterie Box AA / AAA / 9V / CR2025 / CR2032

Hallo Freunde, ich biete euch hier einen Batterie Organizer in Getränkekasten form zum download an. Ihr findet hier Kästen für AA, AAA und 9V Batterien. Ich hoffe sie gefallen euch.

Pobrania
4910
Polubienia
250
Ocena
4,86
P
Printablesfuchsr

Customizable Print-in-Place Cases for Button and Cylindrical Batteries

Print-in-place model to hold button-style or cylindrical batteries. Some example models are included, and the OpenSCAD source code is provided, for full customization. Instructions below are for button-style batteries. The version for…

Pobrania
4662
Polubienia
1613
Ocena
4,93
P
PrintablesBeo666

Getränkekiste AA Batterien Sammelkiste

Hier mal ein Modell an alle, die gerne Ordnung in das Batteriechao bringen möchten. Die Kiste fasst 12 AA Batterien und ist stapelbar. Es wird kein Support benötigt. ACHTUNG: LEIDER GIBT ES DA DRAUßEN VIELE WIDERLICHE MENSCHEN, DIE FÜR…

Pobrania
4430
Polubienia
885
Ocena
5
P
Printablesfns720

FIFO battery dispensers for AA/AAA/18650 batteries

I have designed these dispensers to use my batteries in first in - first out order. You can stand these up on the table, or hang up using a standard 4 mm countersank screw or attach their back to anything using glue or 3M's Command Tape…

Pobrania
4242
Polubienia
559
Ocena
4,99
P
PrintablesCorvus

Battery Storage Tray - for AA (36x) + AAA (49x) Batteries - Drawer Organizer

Practical battery storage trays to keep your drawers clean and organized. No more loose batteries rolling around! 🟧 AA Version: Holds up to 36 batteries (approx. 104 x 94 x 23 mm) 🟧 AAA Version: Holds up to 49 batteries (approx. 93 x 80 x…

Pobrania
3995
Polubienia
886
Ocena
4,83
P
PrintablesMilos V.

Rugged Box for 20x AA / AAA batteries

Small remix of the Parametric Rugged Box by TheSameNameTwice (https://www.printables.com/model/56071-parametric-rugged-box) This boxes are designed for 20 pieces of AA / AAA batteries. Thanks for the nice design of the box. Print Settings…

Pobrania
3495
Polubienia
446
Ocena
4,85
P
Printablesjurij98

Milwaukee M18 Battery Holder for 4 Batteries

Milwaukee M18 Battery holder that you can use to mount 4 batteries. The initial holder design was created by https://www.printables.com/social/69337-vikgr/about . The design has space, so you can easily press the buttons on a battery to…

Pobrania
2876
Polubienia
281
Ocena
5
P
PrintablesNighthawk2023

Batterie Box

Batterie Box für viele unterschiedliche Batterien. Größe: 235 x 130 x 25 mm Es passen folgende Sorten und Mengen hinein: AA: 30 AAA: 40 9V: 8 CR 2032: 20 CR 2450: 10 2 Farbig Gedruckt auf Bambulab P1P.

Pobrania
1995
Polubienia
436
Ocena
5
P
PrintablesBrian K

Battery holder for Festool batteries

This holder will help you organize your festool batteries. Other batteries might fit, but this was designed for Festool.

Pobrania
1941
Polubienia
252
Ocena
5
P
PrintablesPapaBravo

Battery Dispenser Box for AA and AAA batteries

Large capacity 26 x AA and 35 x AAA Note: I designed this back in Feb 2019 and it’s been on https://www.thingiverse.com/thing:3414188 since then. I added it here on printables.com in Sept 2022, but I have come across a copy of it already…

Pobrania
1572
Polubienia
154
Ocena
4,95
P
Printablesoriddlero

Milk Crate Battery Holders for AA & AAA Batteries w/ 2-Color Printed Labels!

Okay, I'll admit, I've seen a "Beer Crate” battery box, however, I don't think I've ever seen an actual “beer crate” in real life. Hmm. Anyhow… It inspired me to create something that was infinitely more familiar to me, a “Milk Crate”…

Pobrania
1414
Polubienia
116
Ocena
4,5
P
Printableshalfbit

Half-height beer crate for CR2032 coin cell batteries

A half height beer crate to store 14x2 (28 total) CR2032 (or thinner) coin cells. Fully compatible with the original battery beer crate design. The gluable bottom part from the original also fits. Stacking two of these half height crates…

Pobrania
1379
Polubienia
235
Ocena
4,97
P
PrintablesSartor

Batteries holder for 18650 or 21700 lion packs (6S, 4S, 2S)

Better to print from temperature resistant filament (ABS, PETg) and without supports

Pobrania
1303
Polubienia
113
Ocena
5

Makita 18V Battery Holder for 2 batteries.

0.4 nozzle, 0.2 layer hight and 0.6 line width for faster print speed The model are optimized, so it don't use so much plastic. if you download please give a ❤, and if you make one, post it. it’s all very much appreciated.

Pobrania
1302
Polubienia
89
Ocena
5

Makita 18V Battery Holder for 4 Batteries

0.4 nozzle, 0.2 layer hight and 0.6 line width for faster print speed The model are optimized, so it don't use so much plastic.

Pobrania
1003
Polubienia
60
Ocena
5
P
PrintablesMB

Batterie Spender (Battery dispenser) für ca. 15 AA Batterien

Batteriespender für AA Zellen zum Verschrauben an der Wand. Die Batterien können unten entnommen werden und man hat noch einen Überblick über den verbleibenden Rest. Battery dispenser for AA cells for screwing to the wall. The batteries…

Pobrania
983
Polubienia
68
Ocena
5
P
PrintablesMB

Batterie Spender ( Battery dispenser ) für ca. 20 AAA Batterien

Batteriespender für AAA Zellen zum Verschrauben an der Wand. Die Batterien können unten entnommen werden und man hat noch einen Überblick über den verbleibenden Rest. Battery dispenser for AAA cells for screwing to the wall. The batteries…

Pobrania
981
Polubienia
79
Ocena
5

Makita 18V Battery Holder for 3 Batteries.

0.4 nozzle, 0.2 layer hight and 0.6 line width for faster print speed The model are optimized, so it don't use so much plastic. if you download please give a ❤, and if you make one, post it. it’s all very much appreciated.

Pobrania
978
Polubienia
57
Ocena
4,67
P
PrintablesFrankWL

Batterie Box AAA

nwendung: Diese Box dient der Aufbewahrung von bis zu 20 Stück Batterien AAA. Sie besteht aus einem Unterteil und einem Deckel. Der Deckel ist so gearbeitet, dass er gut auf dem Unterteil hält. Die Abstimmung von Haftung und Lösbarkeit…

Pobrania
962
Polubienia
41
Ocena
5
P
PrintablesKlave

Dummy C, AA and AAA batteries

When you're tired of changing batteries and want to use a USB power source instead, you can do some electronics modification or you can use these dummy batteries instead of modifying the battery powered light/game/toy ... Three alkaline…

Pobrania
951
Polubienia
36
Ocena
4,8
P
Printableskpreid

Customizable case for AA, AAA, cylindrical batteries

3D-printable storage boxes for small sets of cylindrical batteries. Designed to be leak-resistant: the body and lid have full-length overlap and there are no unnecessary openings. They are also a very snug fit so they should be secure…

Pobrania
949
Polubienia
130
Ocena
4,73
P
PrintablesGn_zg

Stackable Battery Organizer & Sorting Boxes / Stapelbare Batterie Organzier und Sortirkasten

English description below Deutsch Infos zum Druck: 0.4 Nozzle, 0.2 Layerhöhe, 2 Perimeter, 10% Infill (Gyroid), Stützen nur auf dem Druckbett! Praktische Aufbewahrung von Batterien und anderen Kleinkram. Ideal für die Schublade oder auf…

Pobrania
892
Polubienia
114
Ocena
5
P
PrintablesTom

Batteriespender für AA und AAA

Ich habe den Batteriespender auf thingiverse gefunden. Mir hat gefallen, dass da auch ein Deckel bei war. Den Spender habe ich mit Support gedruckt. https://www.thingiverse.com/thing:4752641

Pobrania
852
Polubienia
32
Ocena
5
P
PrintablesFrankWL

Batterie Box AA

Diese Box dient der Aufbewahrung von bis zu 20 Stück Batterien AA. Sie besteht aus einem Unterteil und einem Deckel. Der Deckel ist so gearbeitet, dass er gut auf dem Unterteil hält. Die Abstimmung von Haftung und Lösbarkeit habe ich mal…

Pobrania
844
Polubienia
40
Ocena
3,75
P
Printablesfrglez

AA-AAA Batteries rugged box

Remixed rugged box from @TheSameNameTwice to hold 8 AA and 6 AAA batteries.

Pobrania
841
Polubienia
89
Ocena
4,6
P
PrintablesEstep

Battery Cases for 4 AA or 4 AAA Batteries. With screw-caps.

If you are looking for bigger cases for 12 Batteries, you can find them here: https://www.printables.com/de/model/382489-battery-cases-for-12-aa-or-12-aaa-batteries-with-s Update 18.4.21: Added STLs for the lids without the AA/AAA Labels.…

Pobrania
821
Polubienia
83
Ocena
4,83
P
PrintablesFrankWL

Batterie Box CR2032

Diese Box dient der Aufbewahrung von bis zu 20 Stück Batterien CD2032. Sie besteht aus einem Unterteil und einem Deckel. Der Deckel ist so gearbeitet, dass er gut auf dem Unterteil hält. Die Abstimmung von Haftung und Lösbarkeit habe ich…

Pobrania
800
Polubienia
65
Ocena
4,75

Battery box for two 1.5V AA batteries in series connection

EN: Box for two 1.5V AA batteries in series connection. Print without supports. The electrical part needs: - 2 pc anode battery contact AA/AAA type 228 (12x12x0.3 mm) - 2 pc cathode battery contact AA/AAA type 228 (12x12x0.3 mm) Simply…

Pobrania
796
Polubienia
364
Ocena
5
P
PrintablesSuper-KAP

Batterie Recycling Box

Batterie Recycling Box mit Deckel zur Aufbewahrung von Altbatterien bis diese entsorgt werden können. --------------- ENGLISH -------------- Battery recycling box with lid to store used batteries until they can be disposed of. Print…

Pobrania
726
Polubienia
72
Ocena
4,5
P
PrintablesJason

Adapter for 18V Bosch Power4All tool batteries

I had a need for a portable power source for another project - as I had a couple of the (green) Bosch tools made this adapter so I could repurpose the batteries and chargers. The print is in two parts. I printed mine in PLA which seems to…

Pobrania
719
Polubienia
68
Ocena
5
P
Printablesjufy111

AAA Battery Holder 1/2/3/4/6/8/10/12 batteries

A makeshift battery holder for AAA batteries, that you can wire as required. No terminals or springs are required. The design incorporates a complaint mechanism, inspire by this design. Screw holes are included to fasten it to another…

Pobrania
693
Polubienia
63
Ocena
4,8
P
PrintablesInterias

Form-fitting stackable batterie-crates with europallet for storing batteries (AA, AAA, 9V and others)

Because I liked the battery crates from https://www.printables.com/de/model/173788-customizable-stackable-beer-crate-for-all-types-of a lot but wished for a couple of modifications, I started redesigning them. My redesigne includes:…

Pobrania
684
Polubienia
73
Ocena
5
P
PrintablesOachkatzl

Box for Nikon Z Storage and Batteries

A box for your Nikon Z needs. Neatly stores 4 Nikon EN-EL 15C batteries, 4 XQD/ CF-Express B and 4 SD cards. If you want it to seal, use a piece of 1,75mm TPU filament, cut it to length and join the ends with ca glue, for example, to…

Pobrania
683
Polubienia
92
Ocena
5
P
PrintablesScottmi

AAA Battery Box for four AAA Batteries

I have devices that like to drain batteries and then suffer leakage, (and one AAA device in particular), so I like to keep the batteries outside the device. Here's a case aiming for minimal size and reduced material, while maintaining…

Pobrania
679
Polubienia
70
Ocena
4,8
P
Printableskaitain

Skywatcher Star Adventurer 2i batterie cover/polar alignment aid

I created an aid to help with rough polar-/daytime polar alignment for the Skywatcher Star Adventurer 2i. simply replace the batterie cover with this 3d printed version, put the phone in the phone holder and run software like “PS Align…

Pobrania
648
Polubienia
44
Ocena
0
P
Printablesvas__design

Milwaukee Compact Packout Organizer Insert for M12 Impact Driver & Charger, 2 Batteries & Bit Case

Insert to hold an Milwaukee M12 Impact Driver, 2 batteries (one in driver, 1 in insert), charger (with UK plug), Milwaukee hex bit case. There is additional storage underneath the charger and the impact driver which can be accessed by…

Pobrania
645
Polubienia
148
Ocena
0
P
Printablesfotrik

"Snow" Globe Christmas Lithophane with Base for AA Batteries

This is an enhancement of "Snow" Globe Christmas Lithophane from Sebastian that is a remix of "Snow" Globe Christmas Lithophane from Taylor Herrin . I made a base for 3x AA batteries and power switch that you can use to build your own LED…

Pobrania
631
Polubienia
154
Ocena
5
P
PrintablesK0906F

organizer, battery storage - Batterie Box Aufbewahrung

What you see is what you get. :-) Data: 24 x AA 32 x AAA Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 15% Filament: PLA Category: Organization

Pobrania
631
Polubienia
29
Ocena
5
P
PrintablesBenBreaksThings

Gridfinity 1x3 block, storage for (8) 9v batteries

Made in TinkerCAD, no fancy fillets for rounding to accommodate any 9v standard size despite edge rounding. Tested with batteries that were wrapped in plastic and still had space to place without issue, but not too loose.

Pobrania
628
Polubienia
61
Ocena
5
P
PrintablesTinnT

Rugged Box - AA and AAA batteries

I have created two version of the Rugged Box that hold 20 AA or 20 AAA batteries. The design uses 25 mm screws and the latches are the same for both boxes. I uses inserts for the batteries as I find it more useful (if you decided that you…

Pobrania
625
Polubienia
83
Ocena
5
P
Printablesdaclasen

Print-in-Place Case for LR44 Batteries

This is a Remix of Print-in-Place, Customizable Cases for Button-type Batteries made by fuchsr that will fit 2x10 LR44 Coin-Cell Batteries. Please refer to the original model and its detailed documentation regarding Print Settings etc. :)

Pobrania
619
Polubienia
62
Ocena
4,95
P
PrintablesGraemeH

Gridfinity magnet stackable battery dispenser for Amazon Basics batteries

The original model by FruitieX was great but I found that my Amazon Basics AAA and AA batteries didn't fit so I changed the couple battery size parameters in the Fusion file to get the fit right. Posting both the inserts and the base, I'm…

Pobrania
610
Polubienia
68
Ocena
4,82
P
PrintablesBeo666

Getränkekiste AAA Batterien Sammelkiste

Hier mal ein Modell an alle, die gerne Ordnung in das Batteriechao bringen möchten. Die Kiste fasst 12 AAA Batterien und ist stapelbar. Es wird kein Support benötigt. ACHTUNG: LEIDER GIBT ES DA DRAUßEN VIELE WIDERLICHE MENSCHEN, DIE FÜR…

Pobrania
606
Polubienia
60
Ocena
5
P
PrintablesSebastian M.

HSW Batteriehalter AA & AAA

Ich habe das Modell für die Honeycomb Storage Wall modifiziert, man benötigt 3 Inserts.

Pobrania
605
Polubienia
173
Ocena
4,83
P
Printables¯\_(ツ)_/¯

Aufbewahrung AA Akkus (HR6) oder AAA Akkus (HR03) Leer und Voll geladen Batterie box battery storage holder empty full charged

Find english version below... Box bzw. Behältnis zur Aufbewahrung von AA-Akkus (HR6) und/oder AAA-Akkus (HR03). Unterschiedliche Bereiche und Farben dienen der Unterscheidung ob die Akkus VOLL aufgeladen oder LEER sind. Die…

Pobrania
593
Polubienia
63
Ocena
4,8
P
Printablesverdrus

Battery dispenser for AA Mignon (Batteriespender)

Battery dispenser for 17 AA mignon batteries. I was inspired by the great design from adoniram with his version of a battery holder thing:1004996 . But I had trouble with stucking batteries so I decided to design a complete new one which…

Pobrania
589
Polubienia
87
Ocena
4,7
P
PrintablesBiny

Batterie Case

A little case for the most used batteries around the house

Pobrania
576
Polubienia
27
Ocena
5
P
PrintablesKevin

AA + AAA Batteries Storage

Printed with Prusament PETG Jet Black 0.3mm no rafts or supports required.

Pobrania
544
Polubienia
40
Ocena
5
P
PrintablesOurAngryBadger

Battery Terminal Covers for M8 LiFePO4 Batteries

Battery terminal covers for LiFePO4 batteries that typically use an M8 bolt on the battery terminals. I recently built a battery bank for my RV consisting of (3) 100ah LiFePO4 batteries I purchased on Amazon. They are great batteries,…

Pobrania
539
Polubienia
33
Ocena
4,8
P
Printablesscooter_magavin

AA battery storage box for 4 batteries

AA battery storage box for 4 batteries. Friction fit lid. No supports needed. I printed mine in pla with .2 layer and 15% infill. I did have to clean up the underside of the top slot with a knife so the lid would slide in smoother.

Pobrania
538
Polubienia
65
Ocena
5
P
PrintablesSvlina

Halter für Stützlastwaage Wohnwagen incl. Batterie

Halterung für die Stützlastwaage und die 9V Blockbatterie

Pobrania
521
Polubienia
37
Ocena
0
P
PrintablesMateo Van Damme

Battery holder for 2 Canon LP-E17 batteries

I designed the fit to be perfect when printed in Prusament PETG, I haven't tried Prusament PLA or other filaments (yet). The battery type “LP-E17” is embossed on one side. On the other side the same is done in Braille.

Pobrania
516
Polubienia
51
Ocena
4,4
P
PrintablesEstep

Battery Cases for 12 AA or 12 AAA Batteries. With Screw-Caps.

Simple Cases for AA and AAA batteries. If you are looking for smaller cases for only 4 Batteries, you can find them here: https://www.printables.com/de/model/382491-battery-cases-for-4-aa-or-4-aaa-batteries-with-scr Print Settings Rafts:…

Pobrania
507
Polubienia
59
Ocena
5
P
PrintablesFrankWL

Batterie Box LR44

Diese Box dient der Aufbewahrung von bis zu 20 Stück Batterien LR44. Sie besteht aus einem Unterteil und einem Deckel. Der Deckel ist so gearbeitet, dass er gut auf dem Unterteil hält. Die Abstimmung von Haftung und Lösbarkeit habe ich…

Pobrania
504
Polubienia
37
Ocena
4,86
P
PrintablesJR

Gridfinity Bin - AA Batteries (2x3x4)

Gridfinity bin designed to hold 28 AA batteries. Bin size is 2x3x4.

Pobrania
495
Polubienia
43
Ocena
4,6

Battery box for three 1.5V AA batteries in series connection

EN: Box for three 1.5V AA batteries in series connection. Print without supports. The electrical part needs: - 3 pc anode battery contact AA/AAA type 228 (12x12x0.3 mm) - 3 pc cathode battery contact AA/AAA type 228 (12x12x0.3 mm) Simply…

Pobrania
493
Polubienia
195
Ocena
5
P
PrintablesClint J.

BETAFPV Pavo Pico Frame for 2s Batteries

This is a remix of the Pavo Pico frame for 3s batteries by al-bandit (@albandit) in order to serve as a replacement for the original frame with 2s batteries. This is designed to accept threaded inserts which should be similar to the…

Pobrania
487
Polubienia
31
Ocena
5
P
PrintablesPrinterchick

battery organizer for AAA, AA, C, D and 9v batteries

battery organizer for AAA, AA, C, D and 9v batteries. I indented all of the letters so you can 'fill' them in with your color of choice if you have a color 3d printer. The photo was printed in 2 filaments with a Bambu X1 and AMS. I have…

Pobrania
471
Polubienia
48
Ocena
3,75
P
PrintablesPatrik

Gridfinity bins for CR2032 batteries

Gridfinity battery bins for CR2032-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 8 batteries. A 1x2x4 bin that fits 16 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…

Pobrania
469
Polubienia
44
Ocena
5
P
Printablesinfamous61

AA Battery Holder (4 Batteries)

AA battery holder for up to 4 batteries. Great for carrying those extra batteries. Created using Tinkercad.

Pobrania
468
Polubienia
65
Ocena
5