Wyniki wyszukiwania: bc

Cable Repair and Protect for iPhone and Samsung [lightning+usbc]

The charging cable always breaks at the same position, just right under the plug. Don't replace it, Repair it with this easy print! This works for Apple USBC and lightning, as well as for samsung charging cables! No glue or tape is…

BBC Micro:Bit V2 case

Micro:bit case for the second version of the board Supports the new features of the card: - microphone - speaker - Touch logo Remixed from https://www.thingiverse.com/thing:3028078 and https://www.thingiverse.com/thing:3511591

Little Bobcat - (printed in one piece without supports)

[ENG] A small Bobcat with freely rotating wheels and a moving shovel printed in one piece. It is printed in the "on its side" position so there is no need to add supports. For functional printing, the first layer and flow must be properly…

Logitech C270 Webcam Cover Replacement (with GoPro Mount)

This is my cover replacement for Logitech C270 Webcam. All you need to do is disassembly the original webcam and remove PCB electronics board. The board is fixed in the new housing using the original screws. Pros Click-clack system. No…

Iwata Airbrush holder (HP-CS & HP-BCS)

Most of the airbrush holder on the market can be installed beside you at your desk. This is the case of the Iwata holder and other 3d printable models out there. I designed this one to be installable at either the back end of your desk…

Hot Shoe / Cold Shoe Mount for Webcam

This is a Hot Shoe / Cold shoe mount to mount a webcam on top of a camera. ¼-20 thread tripod mount. I used this to mount my webcam for Octoprint on top of my DSLR I'm using for Octolapse within Octoprint. It's very light duty even when…

Logitech C920 webcam privacy cover

Didn't seem to find a cover for the C920 so made one with inspiration from another user. Recommend using the improved version of the cover which fits better to the camera. Logitech C920 privacy cover improved by siamigo | Download free…

Webcam Wall Mount

Nice and simple two-axis wall mount for old Logitech webcams for use with octoprint. 3M screws and 3m nuts are used to assemble the wall mount. It's screwed with standard 3,5mm wood screws to the wall. The camera plate is designed to be…

Logitech C615 Webcam Privacy Shutter

This is a hinged privacy shutter for a Logitech C615 webcam. The shutter can be raised when the camera is in use and lowered to ensure (visual) privacy when it is not. The mount features cutouts for the 'in use' LED and microphone, and…

Logitech C270 Webcam holder and arm for Original Prusa Mini/MK3/MK4

A simple Webcam holder with a arm for a Logitech C270 Webcam. Works with Original Prusa Mini, i3 MK3, MK4 and similar printers with standard aluminum extrusion profiles. You can Mix&Match the different arms, but i suggest to use the parts…

ABC Molds

Writing on the send with a finger is ok, but using molds with 3D letters is way cooler! 😉 Another idea: Freeze water to make text from ice

Webcam holder on BenQ Screenbar

This is a small holder to fix webcam (or any other device with standard 1/4" tripod screw) atop of a BenQ ScreenBar. The webcam orientation is adjustable. No fastener needed.

Webcam stand compatible with Logitech Brio

Layer height: 4mm Infill: 10 (or 0) Support: no

Laptop webcam universal cover

Small clip to cover the webcam of the laptop for security when not using it, you can remove or slide it to a side to use the webcam. Print it over one side (see picture of the piece on the printer bed), so it will have some flexibility to…

Specialized Ladegerät SBC-C07 Wandhalterung V2

V2 - jetzt Online Wenn Sie auf der Suche nach einer modernen und praktischen Wandhalterung für Ihr Specialized Ladegerät SBC-C07 sind, dann ist die Halterung die perfekte Lösung für Sie. Die Wandhalterung bietet eine sichere und stabile…

IBC TANK CAP - atypicial thread

5/8" big thread a 3/4" small thread for classic lever tap. I print 100% infill from PETG In 3mf file is set 30% and 3 perimeters which should be sufficient strength and edited model for print without supports.

JSN-SR04T ultrasonic sensor lid mount for IBC water tank

This mount is used for mounting JSN-SR04T water level ultrasonic sensor on top of the IBC lid.

6-5th century BCE silver coin from the Greek city of Cyrene : Silphium and Magas

6-5th century BCE silver coin from the Greek city of Cyrene : Silphium and Magas

Boobcam: The Movie (Version in three colors and in two colors)

BCC Lattice

This BCC lattice is a great model to physically understand the BCC crystal structure. Each point represents an atomic position, thus this model can be used to help understand miller indices of lattice points and planes. How to print:…

Support de webcam pour Prusa i3 mk3s

Support simple, qui se clipse sur le chassis, sans vis. J'ai rajouté 2 nervures au design d'origine pour rendre le bras plus rigide.

Webcam step for thin-framed monitors

Webcam Step: Elevate Your View Modern technology has gifted us with sleek, thin-framed monitors. While these technological marvels enhance our workspaces, they also present a new set of first-world problems: webcams dangling into the…

Prusa Enclosure Mount for Logitech c270 Webcam

Printing PLA, .20mm, supports optional ~22min Parts Required 3x20 pin (1x) Logitech Camera c270 w/hinge mount removed (1x) M3x8 Screw (1-3x) Assembly Push the 3x20 pin part way through one side of the mount, use pliers if neccesary Put…

Bobcat Logo for AN3DRC Skidsteer

Made a quick logo for the End Gate of the Skid Steer Loader made by AN3DRC. https://an3drc.com/e-shop/construction-vehicles/tracked-skid-steer-loader https://an3drc.com/e-shop/construction-vehicles/wheeled-skid-steer-loader recommend…

Trust Trino HD Webcam Case with Adjustable Focus (and multiple mounting options)

This case allows you to (manually) adjust the focus of a Trust Trino HD webcam (available for ~€10 on Amazon ) and mount it on a flat surface, rotatable in one or two axes (tilt or pan and tilt). With this case, the webcam becomes quite…

Pagani Huayra BC Wall Art

Very nice and detailed Wall Art model of the Pagani Huayra BC. Size can be regulated. I accept next model suggestions.

Handle and protect for Bobcat wheel loader

Wheel loader model add-on by https://an3drc.com/e-shop/construction-vehicles/tracked-skid-steer-loader

Behälter für Abschmink-Pads und Wattestäbchen

ein Behältnis für Abschminkpads und Wattestäbchen

Game Boy Game Cartridge Display Stand (DMG, GBC, and GBA)

This is just a simple stand that I created because I couldn't find one with all the features I was looking for. Those features being: a cutout in the front wall to show as much of the cartridge as possible, a support on the back to help…

IBC Container Inlet Filter (DN150 & DN225)

IBC Container Inlet Filter (DN150 & DN225) This IBC container inlet filter is designed to prevent large debris and contaminants from entering rainwater storage tanks. The filter is installed directly into the IBC container inlet opening…

Webcam holder for BenQ Screenbar Halo

This is a remix of hjzl16's design of a webcam holder for the BenQ screenbar. I adjusted the dimensions of the clip to fit the newer BenQ screenbar Halo. Ball clamp and ball head screw can be used from the original. Printed it with PLA…

IBC tank hose hook

Durable hose hook that fits IBC tank construction. Print from PETG or ASA.

Filament cutter cover / Osłonka obcinaczek do filamentu

Osłonka na obcinaczki do filamentu , które są naprawdę bardzo ostre. Jeżeli ktoś by chciał plik w formacie .FCStd stworzony we FreeCad to zapraszam tutaj na moją stronę :…

Label bin for Brother QL-820NWBc label printer

The Brother QL-820NWBc label printer does not come with a bin to catch the labels that are printed. Therefore, these just fall to the ground. To solve this issue: a bin to catch the labels. This bin interfaces with the holes on the bottom…

Wattestäbchen / Q-Tipps- und Pad Spender

Spender für Wattestäbchen und Make-Up pads. Ein kleiner Helfer fürs Bad und Hobby. Dispenser for cotton buds and make up removal pads Little helper for the Bathroom and Hobby

Cube Ribcage Pot Plant - Home Decoration

Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 15% Add a some small Cylinders as Negative Volume for draining No Supports needed Scale it as you like :)

Generic WebCam Mount for Ender 2 Pro

This is a Model allows for the Webcam to be attached by use of a 1/4" x 3/4" Stainless Steel Hex Bolt. Rather than disassembling the Webcams to attach it to the mount. It attaches using a friction clip attaching to the Z roller Motor…

5000 BC -- The Thinker and the Sitting Woman of Hamangia

The Thinker of Hamangia (Romanian: Gânditorul de la Hamangia ) , also known as Thinker of Cernavodă or collectively The Thinker and the Sitting Woman , is an archaeological artefact, specifically a terracotta sculpture. This ancient…

Beretta Bobcat 20x 22LR Magazine Loader

A tool to ease the loading of Beretta Bobcat 20X .22LR magazines. It comes in two variants, one with wings and one without. The wings variant allows for easier unloading and improved one-handed operation. The no wings variant is more…

Particle Tachyon SBC modular case

This is a custom box for the Particle Tachyon single board computer (SBC). This computer has the Raspberry Pi form factor, but does not use the exact same port, so a tailored case was in order. There are several variant of the model to…

eMeet NOVA Webcam Privacy Shield

This print is a privacy shield for the eMeet NOVA webcam. I believe newer versions are sold with privacy cover but mine came without one. So I designed this privacy shield. You can simply slide it in and out of place. The USB cable on the…

Support smartphone comme (as) webcam

Pour surveiller vos impressions sans avoir recours à une caméra IP : un vieux téléphone (même 3G). Ou une tablette. To monitor your prints without using an IP camera: an old phone (even 3G). Or a tablet. Print instructions Une idée pour…

Lack enclosure generic webcam mount

Designed a simple webcam mount for my cheap, brandless Aliexpress webcam. Based on the design of a C920 webcam mount. I liked the simple design, that could use the built-in arm and could easily be removed in case the top table should need…

PS3 WebCam Stand

PS3 WebCam Stand. Perfect height to place directly in front of your MK2 or MK3. Initially the stand was for mounting on custom enclosure (hence the screw holes on the top) Created a free-standing version for use on non-enclosed printers.…

Logitech C920 webcam blocker

Super simple to print and use Logitech C920 (HD PRO) webcam blocker that will sit on top of your camera and will block the camera for your privacy. =) Just print the part laying on the logo and you will not need any support or brim.…

Anycubic Mega S Webcam Holder

Take your current print settings but not too less infill

Clona na svítilnu, visor for light Fenix BC26R

Clona (kšilt) na svítilnu Fenix BC26R pomáha snížit oslnění účastníků provozu v protisměru. Doplnil jsem i logo firmy Fenix, které lze v projektu odstranit. Model je prototyp, který bude teprve testován v terénu. Doplňující clonu…

Replacement body supports for Harley Benton HBCE 990 Electric Cello

The provided knee supports for the HBCE 990 cello don't make it feel like a real cello. I was unable to keep a good posture while making this cello rest on my knees, maybe due to my legs which are smaller than average. This replacement,…

IBC Tote Leaf Filter / Koszyk Filtracyjny do Mausera 1000L NW150

EN: IBC Tote NW150 Leaf Filter Basket A custom-designed leaf filter basket for the top opening of an IBC Tote (Mauser 1000L) with an NW150 (6-inch) thread . It effectively catches leaves, moss, twigs, and other debris coming from your…

Webcam Arm Screwless with Cable Clips

Webcam Arm for Logitech C920/C922 (should work with any cam with standard camera screw hole, hooks into the Prusa aluminium frame, no screws needed. Added camera clips and a short ¼" screw and washers, you only need a cam and 35g of PLA.…

Camera-Holder for double display stand - extended pipe clamp webcam mount

extended the length of the original design by ~35mm, and added some more rounding and smoothening

Screwless Webcam Holder for Logitech C170 with Gopro Mount

Just insert the webcam into the holder, it will push it down. No screws required, 1 single part, so easy :) Don't bend the "spring" too hard though, it might break. Add it to your gopro mounts and stick it to the printer. Voila! designed…

Wallmount Kraftmax BC-4000 Charger

I needed something to mount my charger to the wall. This is my solution. The charger just friction fits into the mount. I foresaw the necessity of a cap to fix the charger in place, which is why there is the possibility to have a square…

Ballnut mount for USB webcam for Sneaks articulating camera mount (FreeCAD)

I needed a ballnut mount for my USB webcam (https://www.amazon.de/gp/product/B08M99YWG9) for the articulating Rasperry Pi camera mount from Sneaks.

Punic zoomorphic Askos (late 5th century BC)

Punic zoomorphic Askos (late 5th century BC) The use of this type of vessel was frequent among the Phoenicians, Greeks and Cypriots, being related to the afterlife. In Ibiza there are mainly representations of doves (symbol of the goddess…

IBC staple 600l cap without thread / IBC 600L objímka - uzávěr bez závitu

sleeves for repairing a non-threaded container cock objímky na opravu kohoutu kontejneru, který nemá závit Print instructions You will need seals, steel clamp , 2pcs of print see photo Potřebuješ těsnění, ocelovou sponku, 2ks výtisku…

Wall mounted Letters - Font BC Alphapipe

I made these letters for a cool wall-mounted Logo. Maybe you also have a use for said Letters (even though they are quite specific). Let me know if you'd be interested in having a complete Set of Letters of the Alphapipe Font.

Přechodka IBC nádrž

Přechodka z IBC ventilu o velkém vnějším průměru 63mm s jemným závitem na ¾"závit na zahradní hadici

Document cam stand for logitech webcams

I needed some form of document camera to be able to digitize hand-drawings reasonably fast. Since they're 60+ Euros and I had a webcam around I decided to build a stand for the webcam. Additional material required: 2x40cm 8mm…

Prusa Mini Camera Mount Remix for Aukey PC-LM1E Webcam

This is a mount/adapter for the Aukey PC-LM1E Webcam, based on the Prusa Mini camera mount here: https://www.printables.com/model/142759-prusa-mini-camera-mount-remixed At first, I generated a holder with the OpenSCAD file, which turned…

NorTec HDFull webcam cover

Camera hatch for Nor-tec HDFull (10 euro's at action in the Netherlands). Place the slider in at the break-point in the GCode to lock it in.

level indicator for IBC

A simple level indicator for nearly every vessel. You only need a transparent hose with an outer diameter of 10mm, two zip ties and some screws. Happy printing :)

ASUS Vivobook webcam+ cover

Baby's first upload! I was able to print this with no brim, although PrusaSlicer recommended one. Fresh roll of PLA, Push Plastic brand, a US vendor. I'll print it in PETG in the future, but I was trialing a lot of fits for this. Also…

ABCD Würfel

Ein toller ABCD Würfel

4000 BC - Lovers of Gumelnitza - Neolithic Statue

In a small Neolithic village nestled along the fertile banks of the Danube river , two souls, bound by a love as enduring as the stone tools they crafted, found solace in each other’s presence. Their days were filled with shared…

Prodloužení kohoutu zahradního k IBC kontejneru

Vytvářel jsem prodloužení kohoutu k 1000l nádrží s 1" kohoutem kovovým s vnějším šroubením na konci. Protože se mi konev nevešla pod kohout, protože byl krátký. Divné tvarování je kůli převlečení mosazného osazení.

Perles => Beads =>Korálky =>ビーズ-(ABC clip)

Bonjour, Je vous propose des perles éducatives empilables de forme carrée, mesurant 20 mm x 20 mm, conçues pour les lacets de vestes, pantalons, bonnets ou chaussures. Ces perles sont parfaitement adaptées à l'impression 3D en PETG ;)…

Logitech C902 Webcam Cover

Logitech C902 Webcam Cover - Sleek and Functional Privacy Solution Protect your privacy in style with this custom-designed webcam cover for the Logitech C902. This 3D-printed accessory is the perfect blend of practicality and aesthetics,…

Bobcat Rad mit Profil / Bobcat wheel with profile

Zweiteilige Reifen-Felgen Kombination mit Profil für den Bobcat von PaJa-trb. So kann die Felge aus festem Material und der Reifen aus weichem TPU gedruckt werden. Alles andere kann vom originalen Modell übernommen werden. Viel Spaß beim…

Reinforced webcam holder for MK3/S/+ MK4/S/+

PETG recommended with at least 15% gyroid infill, 2 horizontal and 3 vertical shell layers. Supports recommended but not required.

Magnetic Webcam Mount for Core One

Magnetic Webcam Mount that sticks to one of the edges of the Core One (or any other magnetic Frame, i suppose). Up to 10 5x5mm Magnets can be used. (I used these: https://www.amazon.de/dp/B07N7PWY93 ) Should work with any Cam that has the…

BenQ ScreenBar Halo top plate for webcam and screen

This part enables you to fix a Dell Webcam WB7022 and a 6'' monitor (FEELWORLD F6 Plus V2) on top of the BenQ ScreenBar Halo. Main purpose of this setup is to be able to look at the other person in the eyes during remote meetings.

2U 7SBC Mounting Plates - Solidworks Remix

Overview Mounting plates for the 2U 7SBC Bracket (Split remix below) Current Versions Raspberry Pi 4 Raspberry Pi 3 2.5in SSD 1 Keystone Jack 3 Keystone Jacks Blank

BCN3D Sigma R17 extruder lower bowden tube housing

A direct replacement of Sigma R17 extruder lower bowden tube housing

2U 7SBC Bracket for 10in Rack (Split Remix)

I remixed this part to allow me to print it on my Core One. I also created a version that just uses M3 hex nuts (because I hate installing heatsets if it can be avoided) Required Hardware Hex nut version: QTY 16 M3 Nuts Qty 2 M3x16mm SHCS…

Peníze do dětského obchodu

Mince na hraní pro děti do dětského obchodu

Perles => Beads =>Korálky =>ビーズ-remix(ABC clip)

Bonjour, Je vous propose une nouvelle mouture des perles éducatives en forme carrée, mesurant 20 mm x 20 mm, conçues pour les lacets de vestes, pantalons, bonnets ou chaussures. Ces perles sont parfaitement adaptées à l'impression 3D en…

Zebco Spincast Rod Vertical Wall Rack – 5 Rods, Staggered, Parametric

A compact vertical wall rack for five spincast combos. Alternate rods sit 120 mm higher on narrow pillars, so neighboring reels and cranks sit at different heights and don't collide. That lets five rods fit on a rack only 244 mm wide,…

Snadno přenosný stojan na zobcové flétny

Cílem bylo vytvořit rozložitelný držák/stojan na dechové hudební nástroje, které se tradičně díky tvaru obtížně odkládají, zejména pro hráče na více fléten.

Threaded Bulkhead Fitting for IBC Tank / Drum — 110mm Pipe Pass-Through with Bolt Backup

Threaded bulkhead fitting for 110mm pipe, designed for DIY wastewater treatment setups (an eco septic system using IBC totes, but works for anypass-through on a flat-walled plastic tank). Will upload more pictures asap. TWO PARTS: a body…

Microsoft WebCam mount for the PrusaBox

Mount to install Microsoft Live VX2000 or Microsoft LifeCam Cinema in the PrusaBox made by https://www.printer-box.com This mount was created to get the possebility to use “old” Microsoft WebCams togehter with the [Prusa] Box. Needed…

Webcam Leech

I made this webcam leech to help my husband remember to look into his webcam when speaking during video calls or filming his podcast. The Webcam Leech can be mounted to the top of your Logitech HD Pro C920 webcam and helps you maintain…

fire extinguisher support for model WBDL_ABC310VBL

Fire extinguisher intended for Marine use model WBDL_ABC310VBL. I provide two model, one super tall depending the place who when to fix it. The simplified model to fix on the wall and take it easy. I made it in PETG black. I also made i…

Peníze do dětského obchodu - každá zvlášť

Mince na hraní pro děti do dětského obchodu - každá zvlášť

BC-304 MK2 (Stargate)

This is the new and very much improved version of the BC-304 class from the show Stargate. Originally I intended to release it as a remix of the original one, but the changes are quite large so I decided to post it as an entirely new…

Elegoo Neptune 3 and 4 webcam mount (clip on)

A simple and strong clip on webcam mount for your Elegoo Neptune printer. Supported Printers (please compare the below image for other printers) Elegoo Neptune 3 Pro Elegoo Neptune 4 Elegoo Neptune 4 Pro The printer needs to look like…

Camera / Webcam Screw - 1/4" - 20 UNC

Camera or webcam mounting screw based on the dimensions of a 1/4" - 20 UNC fitting. Designed to be easy to print, no supports needed and will print at 0.20mm with minimal retractions to help provide a cleaner print. The screw is based on…

Bongo Cat Monitor Mount, Cute Webcam Kitty Buddy

I was inspired when I saw a similar design online but couldn't find an STL anywhere. I have a job interview today and wanted a way to act happily towards the camera while dealing with the anguish of making eye contact with an inanimate…

BC-250 Scooper

A solution I came up with for opening up the heat sink fins on the BC-250. This idea was inspired by the tools that are used for straightening AC radiator fins. Recommended Usage Instructions: Please be careful . The fins on the heat sink…

Ender 3 S1 Webcam Mount

A simple but effective webcam mount designed specifically for the Ender-3 S1. Simply slides on to the X gantry, no tools or disassembly required. Also included is a threaded knob to match any webcam with a tripod mount (1/4-20 threads).…

ASRock AMD BC-250 Shell Case

The Shell Case is a simple and effective solution for organizing cooling on the ASRock AMD BC-250 module. This snap-on shell allows you to mount a single fan quickly and securely without modifying the card or its case. The model requires…

AMD BC-250 Case ATX PSU & Fan Duct

I modified an existing project. I added a fan mount on the front of the BC-250 board and also modified the case front to make everything fit. The idea was to not destroy the fins of the original BC-250 cooling. Additionally, I recommend…

cup holder ABC-DESIGN

Update 2023/08: Ausführung ohne Zwischenclip für Wickeltasche hinzugefügt. Adapter hinzugefügt (stärkere Ausführung M4x35 Schraube)

BC-304 from Stargate

This is my model of BC-304 from Stargate. I named it Ares. It is roughly 60cm long and arround 3 kilo. This is very complex model kit consisting of hundereds parts. I printed and assembled it over a month. The assembly may be kinda hard…

Accurate 3D model of the AMD BC-250 board

The BC-250 board model features accurate proportions and dimensions. All mounting points precisely match the real board. You don't need to print this model, it's just a sample for body modeling.

Mlok grip (BCM replica)

I'm too cheap to buy a real BCM, so I made this. Mounts to Mlok rails, and the grip angle is 82 degrees.

IBC redukce na rychlospojku

Cap for 1000l IBC tank for garden hose with quick connect system. Uzávěr nádrže 1000l IBC pro zahradní hadici se systémem rychlého připojení.

Rev 2 EX BCAR.

Barrel Mounting System (designed to print at .12 layer height) The Rev 2 EX BCAR system is designed with performance in mind. The new mounting system implements Extra Inch Technology®. The new barrel mount increases average velocity to…

SUG-BBC PC Case

SUG-BBC (Big Black Case): Sub-21L DIY 3D Printed PC Case that fits full size ATX components. This case can accommodate high-end gaming components for maximum FPS and cooling. Designed for water-cooling with high-wattage Intel or AMD CPU's…

Camera mount for Elegoo Neptune 3 and Neptune 4 Pro Plus Max (Display Replacement - Klipper Webcam)

UPDATE The camera mount was working but when there were fast short movements with many direction changes it started to wobble. I added a V2, it doesnt look as nice but it is more stable. If you are into timelapse videos then you…