Liczymy pasujące modele…
30 * 20 * 1.5mm, fine toothed comb. Could never find a good tight toothed comb so I designed one. I have a ridiculous number of these around, in the little jeans pocket, in wallet, in rucksack, on desk, bedside table & etc. Designed to…
0.4 nozzle, 0.2mm layer height, 3 perimeter, 5 top, 5 bottom, 20% infill gyroid and NO brim, no arachne.
I love this Lego hitch ball cover (https://www.printables.com/model/263115-lego) so I make some accesories. It has to be glued on the Lego head! It should be printed with fuzzy skin, outside only.
Starting my bathroom organization quest. I'm using Gridfinity trays and containers to organize my life. I'll be uploading any and all original and remixes on here.
A stand to hold vertical a beard brush and a razor. Specifically it's designed around Proraso's brush and Italico double edge razor .
I made this model in like 15 minutes. My friend wanted me to make a model in a low amount of time and release it.
I made this as a simple wall mount for my heated beard brush / straightener. I'm getting tired of just leaving it out on the bathroom counter when I'm done using it. I included tiny nubs to keep the brush in place. Make sure you print…
After I posted the Triple Threat Razor Holder, my wife immediately requested something to get her and our daughter's loofahs off the floor. I didn't want to waste a suction cup on just a hook, so I designed this combo shelf that holds…
I bought this trimmer set a while back and after a while of all the pieces sitting on my countertop next to my sink, I decided to design this organizer for it. I dislike stuffing everything in a drawer or a bag and this just seemed like…
All my models are free. Due to banking restrictions in my country, I’m unable to sell models directly. If you’d like to support my work, you can do so on Patreon. https://www.patreon.com/15369015/join
Beard Owl Figure Meet the Beard Owl Figure — a grumpy little forest guardian that looks like an owl and a garden gnome had a legendary crossover. 🦉🧔 Supports are needed. I used organic-style supports, which peeled off cleanly with minimal…
A wall mounted tray for a phillips beard trimmer and electric toothbrush. It has a post to wrap the cords around and spots to plug in the cables when they are not plugged into the wall. The trimmer can be plugged in while in the tray with…
Facial hair! With options! Your Dummy's upper lip won't be cold any longer with these growing. Modular and lots of options. Print one or print them all! I started this last Movember but kind of forgot about it until I checked out the page…
I wanted a Gridfinity all in one beard trimmer station compatible with Philips Norelco 3000 5000 and 7000. I found an existing model and added sections for a Gillette razor and my Henson razor. 3x6 Gridfinity base
This case is to protect your Mr Bear Family travel beard brush. The case has soft contours, following the brush contours, to keep the handling of the case as satisfying as handling the brush. The brush had come in a nice looking cardboard…
Description: This is a professional-grade beard shaping tool designed for men who value precision in their grooming routine. Featuring a built-in comb and precise measurement markings, this template allows you to achieve perfectly…
This model is a functional, themed organizer designed specifically to hold 1oz circular tins , such as those found in the Viking Revolution Beard Balm variety packs. The design features a curved, nautical-inspired hull that allows for…
Haptic model for the visually impaired, based on the book " Překvapení skřítka Modrovouska " by Markéta Vítková. Read more about the project on PrusaLab's blog .
I decided to make this holder for a few beard and hair trimmers I have. It perfectly fits (2) Wahl beard trimmers ( diameter = 29 mm), 1 Remington Shortcut Pro electric razor, and a small area for tweezers, nail clippers, ect. Wahl -…
For all the cool guys with your enloved beard: You are searching for a beard comb, but want something that's cool and badass? I have something for you! The skull beard comb with a trendy mustache! Recommend to print it with mind 50%…
Hi designed this attachement to trimm my beard. Perhaps any other can use this It´s made for Braun Series razor
0.4 nozzle, 0.2mm layer height, 3 perimeter, 5 top, 5 bottom, 20% infill gyroid and NO brim, no arachne.
Wall mount for Braun beard trimmer. The trimmer I have is a BT5065, but there are others of the same form factor that look like they will fit. I used #8 x 1.25 inch flat head screws and drywall anchors to mount it to the wall. Similar…
Unlike Manscaped's other shavers their bead trimmer uses a sliding on/off switch with no travel lock. This design wedges around the power switch to prevent it from moving. Being a friction fit, you may need to scale up/down the model or…
A shape up tool used to line your hair or beard. Very inspired by The Cut Buddy. Category: Accessories
Six different versions of beard combs. These can be used for your regular hair too, I just made them with my beard in mind. You'll be satisfied with the design of the teeth. It is definitely on par with a regular store-bought comb. If you…
Well ... this is a thing I suppose. Needed a holder for couple of trimmers and a Maglite Mini. It has mounting holes for three 3mm countersunk wood screws. I mounted mine on an Ikea wall cabinet door to stop these bloody things from…
Stand for a SilverCrest Hair and beard trimmer. Model number: SHBS 3.7 B Printing: No support needed min 15% infill 0.2 layer height
I designed an holder for my beard brush and my hair forming paste in the grindfinity system. Enjoy. Print settings on Bambu Lab X1 C Layer height 0.16mm 5% adaptive cubic infill smooth: on Filament: PLA Das Filament Grau
This model is compatible with the lego system.
You can watch our full video here: More thorough instructions below… There are 4 files to download: A main part for the beard. A fastener A large connector A small connector The main part is designed to be quite versatile you can cut it…
Pocket mini comb (with small mirror) for beard and moustache.... can be rescaled for print.
I've been on the journey to organize my bathroom drawer full of my bathroom essentials, including my beard brush and comb. So I decided to utilize the Gridfinity system, but I couldn't find anything to store my beard brush and comb, so I…
This model is compatible with the lego system.
I love this Lego hitch ball cover (https://www.printables.com/model/263115-lego) so I make some accesories. It has to be glued on the Lego head! It should be printed with fuzzy skin, outside only.
Fadeing combs for hair don't work for beards. So i made this parametic FreeCAD model which i like to share. I used FreeCAD Version 1.0.0RC2.38806 (Git) and VarSet for parameters instead of a (classic) spreadsheet. The STLs have a width of…
This is a set of pieces that can be used to recreate the Captain Red Beard figure at 500% scale. This figure appeared in 14 different sets between 1989 - 2002. All of the stl files needed to create this have been included in the "stl…
Adorn your home with this charming bearded gnome! Perfect for holiday decor or a year-round whimsical touch, this adorable gnome figurine is ready to bring joy to any shelf or desk. Highlights: No Supports Needed: Easy printing with no…
Original designed gamer tag and now I’ve created it into a cookie cutter… The GingerBEARD-Man Hope you all enjoy this. Happy Holidays!
holder for the shaving heads of the Braun series 9 beard trimmer
My account was deleted or disappeared without any reason, so I created the account again and uploaded this model again.
This model is compatible with the lego system.
This model is compatible with the lego system.
Doesnt really need much more of an introduction, it's a holder for the Philips Beard Trimmer Series 3000
This is a quick thing I made to hold the parts in the kit (except for the charger). There wasn't another model that would fit my exact model and parts, so I made this. It's not made to be easily customizable, but it can be easily…
Both available now the pocket bearded dragon is now available exclusively for all subscribers and the adult dragon is available for all for free exclusively to download on Makerworld here -…
Hi designed this attachement to trimm my beard. Perhaps any other can use this good prints ;) Category: 3D Printing
Dies ist für Druck mit 2 verschiedenen Farben ausgelegt. Schichthöhe 0,2 mm empfohlen. Nach dem ersten slicen einen Filamentwechsel vor der dritten Lage einrichten und so mit Kontrast ausdrucken. This is meant for 2 color printing. The…
Stand for a Philips BT5502 Beard Trimmer
A folding beard comb I modeled after a straight razor. An elegant device for those of us who do not shave. And an added reminder inset on the housing for those that would seek to disrespect your beard. Happy printing, bearded brothers.
Other brands may work but this is designed to hold sample sizes of beard oil and balm from Mad Viking Beard Co. The holes on the side are for 6mm x 2mm magnets. The stand will eventually connect to other wet shaving and bathroom…
Beard Trimmer Organizer for Philips Multigroom 7000, compatible with other models like the Multigroom 3000 and 5000 that use the same trimming guards. Features snap-in stands to securely hold the guards in place. Printed with a 0.2mm…
This model is compatible with the lego system.
Simple coaster for your Coffee with Angry Beards logo. Change color at 1.5 mm.
Edit 2025-03-08: After a few weeks I decided I wanted a closer shave so I've added a version 2 (V2) that shortens the tines, adds more tines, and moves them closer to the blade. It also rounds the face-interface and adds a thumb-push to…
Long horns that were known to impale his enemies. Check out more from my SKULLS collection!! Tree Supports on build plate only Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Mount your Philips beard trimmer vertically, for example, in a bathroom cabinet. Remember to get it high enough to plug the charging cable in, and low enough to be able to drop it in easily. This prints as a single piece, with a little…
Very quick remix to fit this thing https://www.thingiverse.com/thing:2806108 Sorry, I did'nt take time to thicken the ring piece, but it should be OK (for me it is) printed at scale 75% on the pictures Category: Sculptures
This unique bead design features a charming, realistic depiction of a bearded dragon, the beloved pet reptile, intricately hand-carved into high-quality, durable beads. The beads, made from a smooth, polished material like wood or polymer…
Hello, Welcome to my profile, full of models and miniatures :-) I have for you Bearded Dragon, George Lucas for an exhibition or diorama. Very nice figures. It is suitable for coloring. My children absolutely love it :-). Important: If by…
For Braun All-In-One Beard Trimmer (MGK5445 or similar). Fits the body (with attachments), two additional trimmer attachments, one comb attachment and the brush in a very compact footprint. See photos for examples. Base Dimensions:…
A 2x3x4 Gridfinity bin that holds 6 medium tincture/oil/beard oil bottles (1oz/30mL) roughly 33mm in diameter. Print with your material of choice, no supports needed, don't use a brim unless you hate yourself. Thanks to Zach Freedman ,…
Gridfinity container that holds 2 beard balm tins (2oz side, ~68mm diameter). Print with your material of choice, no supports needed, don't use a brim unless you hate yourself. Thanks to Zach Freedman , who introduced the world to…
This model is compatible with the lego system.
This magnetic beard bead is expertly designed for FDM multi-color 3D printing, featuring a captivating Celtic shield knot pattern that combines ancient symbolism with modern flair. The bead is crafted to be printed in two complementary…
This model is compatible with the lego system.
Created for simpler prints when you have problems with bed adhesion for the comb part of the original.
Specs: Coaster dimensions(X,Y,Z)[mm]: 101,1104,4,2 Print: Not being by my 3D printer for some longer time now, so I decided to put this just as .STLs without trying to print and test it (unfortunately). All logo copyright rights are…
This model is compatible with the lego system.
Mounted on a pedestal. Scalable and paintable. Perfect for any collectors case. Check out my other skulls!! Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Print, groom, grin – this little comb does it all! 🪮 This beard comb brings personality to your grooming routine – with a playful moustache shape that’s sure to raise a smile! Designed for easy FDM printing at home, it’s optimized for use…
This model is compatible with the lego system.
This model is compatible with the lego system.
UPDATE 2025-7-17: Fix the upper cord clip so that it doesn't need support.(Yay less support to print) UPDATE 2025-7-16: Found out that the little trimmer blade tend to fall after a few insertion. A easy fix is to put 2 small piece of…
This model was created as an emergency beard management tool. It is especially useful for people who lose their combs often. this model is not AI nor unsafe for work it would not allow me to uncheck these options.
This model is compatible with the lego system.
This model is compatible with the lego system.
A simplistic beard bead. It can be scaled to whatever size you need and it should print without any issues. Nothing more to say about it
The design is not perfect but I have shared the STEP file for modification, enjoy !
