216 modeli
Im VW California bläst die Warmluft der Raumheizung aus einem Lüftungsgitter an der B-Säule unten. Das original Lüftungsgitter hat die Lamellen nach unten ausgerichtet, so dass sich die warme Luft schlecht im Bus verteilt. Bei diesem…
Wydruk około 9,96 €–12,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For best performance the Benchdog has to fit closely. Due to different accuracies/ tolerances of every printer and perforated grid plate, I recomend you first print the "tolerance test". It is steped in 0.1 mm incremets from 19.7 to 20.2…
Wydruk około 0,99 €–1,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dieses Original Midland SMA-Flex-Antennen-Kit https://www.mwf-service.com/shop/midland-sma-hyflexantennen-set-fuer-g7-g8-g9-g14.html ermöglicht den problemlosen Austausch der fest eingebauten Original-Gummiantenne gegen ein passendes…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
Ich habe hier einen einfachen Rauchmelder Konstruier der mit kleinen 3x2,7mm Magneten (rund) an der Decke schnell und einfach angebracht werden kann, um die Öse für die z.B. Liebesschaukel zu verstecken. zum anpassen an andere hacken oder…
Wydruk około 3,19 €–3,89 € nettoWstępna wycena jednego wariantu
This is the 2 Piece version of my One-Hand Clamp Mod which allows the use of Bessey EZM or Wolfcraft Pro M directly on your perforated grid plate Workbench. The “fixed” jaw slides on the clamps rail and allows the rail to be pushed into /…
Wydruk około 0,98 €–1,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Butée de fin de course pour les presses (serre-joints) Korpus KRE de Bessey. Se clipse à la place de celui qui est cassé ou égaré. Voir la comparaison entre l'original (plus souple et plus solide, à gauche) et l'impression 3D (à droite)…
Wydruk około 0,82 €–1,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The added cutout makes it easier to remove the Speedmarker from the holder without risking damage to the plastic knurled
Wydruk około 1,50 €–1,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a colored model of Wario from Super Mario Brothers. By the talented "printedobsession".
Gedruckt wurde auf einem Prusa MK4 mit 0.4er Düse, PETG, Perimeter=5 Gedruckt wurde auf der Vorderseite, mit der Schrift “118°” nach unten (siehe Bild). Keine Stützen notwendig. Es können bis zu 3 Magnete der Maße 20 x 6 x 1,5 mm…
Remix to hold two clamps instead of six.
I made a remix of this excellent radiation shield to use Aubess Tuya Zigbee Temperature Humidity Sensor. These sensors are very popular and available, so I wanted to try them outdoor. Buy here Size is compatible with the original design…
damit die Wattestäbchen nicht von alleine rausfallen andere Stop-lippe Version
Simple case used to mount your Aubess Mini Smart switch on a DIN rail. Use 2 M2x10 self tapping screws to attach the case to the DIN clip You can either wire up the smart switch before or after inserting it in the case, there are holes…
This small part is for Bessey and simliar woodworking clamps. The guide rails are used to protect the clamps of wood glue. I use them with Stier clamps, should work with Bessey as well. I shortened the original (black in the photo) guide…
This clamp rack was specifically designed to hold the (outstanding) Bessey Tradesman's TGJ series F clamps with a 2.5" throat. To see my version with a 4.0 inch throat, see here. Clamps are retained securely in a small recess modeled into…
base dimensions are 64x64 mm. hole in the middle could be used to insert M6 bolts and attach it for e.g. to the holes of an Festool MFT table.
I designed this based on the Bessie brand Quick Release Bar Clamp. It may also be compatible with Pittsburgh & Irwin brand bar clamps as well. Ideally print in TPU for flexibility. I printed in PLA, and used a heat gun to warm the clamp…
Verbesserter Fuss für Omnistor. Der Splint ist nicht brauchbar, nur hier zu Verständniszwecken. Anstatt den Plastiksplint zu verwenden, einfach einen Hering reinstecken.
Holder and spacer for wall mounting Bessey EZS one-handed Clamps. They are designed in a way, that they can be put side-by-side and have the same space between them. So if someone have more than 4 clamps they can be mounted in one row.…
I needed to make a case for my mini smart switch, so instead of just taking its measurements I modeled it from scratch to simplify my work later
The original clamp supports from Bessy are made from nylon, but they can still break. Sometimes they just get lost. Bessey makes 2 different styles that come with their Bar Clamps. This design is a functional equivalent of those 2…
Support mural sur mesure pour presses Bessey Korpus : largeur identique à la presse pour les fixer cote à cote, léger pincement pour clipser les presses et leur éviter de basculer, légère ouverture pour guider la presse vers le fond du…
These clamp saddles fit Bessey, Gross Stabil, and Jet parallel clamps. They may fit other makes but I have not verified. My intent was to provide reference points for flat panel glue-ups and provide clearance to scrape glue while still in…
This clamp holder will hold Bessey LM2 series clamps without having to adjust the clamp. The clamps can be easily installed and removed but are stored in a compact yet accessible manner. There are models to hold 4, 6, and 8 clamps. It is…
Ich habe die Red Dot Plate von KnoppersDE verbessert, da dieses derzeit (28.03.2023) im Novritsch Webstore nicht lieferbar ist: https://eu.novritsch.com/product/sse18-red-dot-plate/ (Befestigung mit den Originalschrauben.) Passend für die…
This clamp rack was specifically designed to hold the (outstanding) Bessey Tradesman's TGJ series F clamps with a 4.0" throat. To see my version with a 2.5 inch throat, see here. This clamp rack was specifically designed to hold the…
Der Dosenkörper dieser Druckdatei ist nicht mehr glatt, sondern mit einer Textur für besseren Grip versehen.
Bessey K Body Revo clamp wall mount, holds 4 clamps. This is meant to be screwed to a simple 90deg piece of plywood to allow you to find a stud in wall, as k body clamps are pretty hefty. The piece is gangable, ie you can print as many as…
Hi, this is my improved version of the Mini Hook Kleiner Haken. I printed it with 60% infill and for this size it held a lot of weight.
Replacement pads/caps for Irwin & Bessey Bar Clamps. These should be printed in TPU or similar flex material - harder materials could still damage your workpiece and won't deflect enough to slide onto the clamp. These are snug and won't…
I bought some Bessey TG4.540 clamps from the HD and it took maybe an hour after bringing them home before I lost one of the @#$% pads. No problem I figure, Bessey offers replacement pads and I can probably just pick some up from The Big…
Fits Bessey clutch style bar clamps . Print in TPU. For more details, watch the video here ! Note: The above shopping link is an affiliate link, meaning that, at no additional cost to you, I may earn a commission if you click through and…
Multiboard holder for the Bessey LM20 series clamps. This holder uses Multiconnect connectors. 3 of them is sufficient. Multiconnect is much stronger than Multipoint. The connectors are tool-less and very easy to move. The model locks the…
The model is tested with several sizes of the Bessey EZS clamp. The clamping plates are the same size between the models and only the length of the clamp differs. They all fit in to this holder. To put the clamp in open the clamp and…
A small clamp storage design originally intended for under-mounting in a wood shop under a lumber rack. Clamps fit snugly with minimal movement. Could also be mounted vertically. Original size constrained to the build plate size of…
Logos for Bessey, Halder, Lisle and Woodpeckers Slice with .20mm QUALITY or SPEED and you shouldn't have any problems. If you need help with inserting color changes into the slicer, let me know and I'll show you how to have PrusaSlicer do…
Gedruckt wurde auf einem MK4S mit 0.4er Düse, PETG. Kein Stützen notwendig. Durch die Hilfe von @Survival88 gibt es nun eine Version mit integrierten Muttern (siehe Schnittzeichnung). Danke für's Mitdenken und Umsetzen! Im Druckvorgang…
Designed a customizable parametric version of my Bessey Undermount Clamp storage brackets to produce various sizes as needed. The original was designed for a 100mm build plate but most people have larger build plates available. Everything…
Non-marring vice jaws that fit my Bessy brand 4.5" / 116mm bench vice. I printed these solid in TPU, but if you want more give you can reduce the number of perimeters and play with infill percentage.
Clamping Pads for Bessey LM20 Clamps. Two versions - loose and tight fit. Print Settings Printer: FLsun Q5 Rafts: No Supports: Yes Resolution: 0.16 Infill: 100% Filament: SUNLU PLA Black Notes: Use String Supports, easier to cleanout.…
DIN Rail relay mount for Aubess, Athom and same form-factor cheap relays from AliExpress. Designed for use with a base from https://www.printables.com/model/710771-din-rail-bracket For assembly you need two M3x8 countersunk head screws,…
Das ist die verbesserte Version des Becherhalters, nun klar mit 3 Segmenten gedruckt, so dass eine Dose besser gehalten wird. Zudem steigen die gebogenen Teile etwas stärker an. Print funktioniert dennoch ohne Supports gut. Es sind nun…
My band clamps had no home, so I created this holder to store them compactly on the wall. While this design is made for the Bessey BAN 700 band clamp, it should be easily adjusted for similar clamps (if there are any). How to Print this…
History I modeled these in 2018 for LM2.004 clamps, without owning a 3D printer. After uploading the models to Thingiverse (and re-uploading here some time later), I did not think much about them. But they proved popular, and I also…
Ein kleines Update für den unergonomischen Serien-Türgriff des QIDI Q2. Die Serien-Schrauben können weiterhin verwendet werden. Ausrichtung: mit der Frontseite aufs Druckbett, ohne Support. Print Settings Printer Brand: QIDI Printer: Q2…
This is only the clamping part of my One-Hand Clamp Mod which allows the use of Bessey EZM and Wolfcraft Pro M directly on your perforated grid plate Workbench. This version works without an endstop and therefor doesn't need any Screws.…
Within days or owning my kliklamp clamp set I had lost one of the caps for the jaws, annoying. heres a replacement cap. These are direct replacemets for the bessey kliklamps caps that pop on. to buy then they in the UK they would be £25…
This design is very easy to print, even if you don't have your printer tuned well. I designed this to mount my clamps to the wall without needing to do any routing or crazy things. The screw holes are designed for #8 Self Drilling Drywall…
this is a nice quick little box to house your smart switch. I printed at .3 layer height just for speed, it comes out really nice at a .2 layer height. I used 3x8mm heat inserts, and 3x10mm Allen bolt. I designed this for your standard…
Dimensions are made for 95 mm Throat depth. Pics are from Bessey KRE80-2K. Example pressure cap was created from Fiberology 40D flex filament in Vertigo colour. Nozzle temp : 220 Bed temp : 50 I created this, so I could have more flexible…
DE Beschreibung: Passend für das Axial SCX 10 III Chassis. Eine verbesserung für die AXI232017 Wild Boar Antriebswellen. Das Mittelstück wurde so lang wie möglich gemacht um die Kraftübertragung zu verbessern. Die Antriebswellen sind im…
Bessey EZS clamp holder in 4 variants Made of PLA
This is an accessoire for DeWalt parallel clamps like the Bessey Block. It can stack clamps on 2 levels and helps arranging them in a 90° angle. I added a hole in the middle so the Block can be fixated on a table. If you like my work and…
Back plate for Tuya TS0201 Temperature and humidity sensor (zigbee wifi) The hole is marking “top” because top and bottom slots are not the same size. SNUG FIT
Leimwinkel für Bessy-Zwingen XC3 / clamping angle for Bessey clamps XC3
Bessey Decken‑ und Montagestütze STE Halterung für Linienlaser oder andere Werkzeuge. Kann an alle Rohre die einen ähnlichen Durchmesser (26mm)haben wie die Bessey Decken‑ und Montagestütze STE montiert werden. Kann auch für Kameras jeder…
Gedruckt wurde auf einem Prusa MK4S mit 0.4er Düse, PETG Gedruckt wurde das Fach aufrecht stehend. “Stützen” hatte ich eingeschaltet. Vergessen Sie nicht das Stützmaterial auf der Unterseite zu entfernen, dort ist im Encolsure eine…
Bitte stehend drucken, mit den Nasen unten. Kein Support notwendig. Please print standing up, with the noses below. No support necessary.
I love this strap to build frames, but because of its nature it was quite difficult to hang on the wall without it looking messy. It is supposed to be printed and attached to a french cleat plate of scrap wood or anything else you use to…
Voigtländer Bessa 1 viewfinder / sportsfinder Material PETG 1 x 2x4mm screw Do you like it? Please consider to buy me a cup cup of coffee .
BESSEY KRE-EC K-BODY REVO END CLIP. This part is used to hold sliding clamp part on bar. Added thickness to end to permit printing in ABS without breaking. Nylon seems to work best. Picture shows original and replacement part next to each…
This roller adapter can be equipped with a ball bearing of size 608 ZZ or 608 2RS. The outside diameter of the bearings is 22mm The inner diameter of the bearings is 8mm. The notch in the underside of the adapter makes it easier to…
Ein kleines Update für den unergonomischen Serien-Glasplatten-Griff des QIDI Q2. Die Serien-Schrauben können weiterhin verwendet werden. Ausrichtung: selbsterklärend, mit der flachen Seite aufs Druckbett, ohne Support Print Settings…
I lost a few covers for my clamps so I modeled one up in Fusion360 and printed it in TPU. Works great!
A small part for holding the wood spaced to the clamp guide rail. Kleiner Abstandshalter, der auf das Rohr der Rohrzwinge geklipst wird und das Holz auf Abstand hält.
Ich wollte ein Halterung bauen in der die Filter nicht stram neben einander sondern nach hinten aufsteigend sind. So kann man einzelne Filter besser anpacken. Das ensteht durch die schräge Fläche im inneren . Geduckt mit Anycubic Mega S…
Block for Bessey Block to glue up
Shelly Wall Display Adapter Wall adapter for better reading
I recently bought two Bessey K-Body UniKlamp UK 60 and unfortunately one of them was delivered without the end cap (required to be removed to convert it into a spreader, but protects the head from falling of the rail). I decided to model…
Problem der Original Kupplung: Wird der Propeller zu fest drauf gesteckt kann es sein das er nicht abhebt. Die nächste schwachstelle ist das wenn man versucht einen TPU 95A Propeller fliegen zulassen, die normale viereck stange durch geht…
Behälter für Chlorprodukte zur Platzierung om Poolskimmer. Es passen drei HTH Sticks in den Skimmer (andere Produkte funktionieren bestimmt auch). Über den Einstellring kann die Dosierung eingestellt werden. Die Dichtung ist mit TPU…
mostly inspired from thingiverse: Clamp MFT Adapter by JoFi1987 - Thingiverse I made my first model with some help using FreeCAD in order to adapt it for Bessey HV20 clamps. 4 small holes are made for M5 screws and bolt (M5*12 is working…
Kugelschreiber Halterung, höhe ca 64 mm, breite 20 mm magnetisch oder mit Doppelklebeband zu befestigen. Magnete : 10 mm Durchmesser, 2,1 mm dick, für Stifte bis 12 mm Durchmesser, es gibt eine neue Version die für Kugelschreiber besser…
I designed a Bessey clamp holder for the wall. The wall holder is attached to the clamp bessey holder using M4x20 screws and M4 nuts. The counter piece of the holder is installed on the wall using 4x30 screws, which you can find here:…
The cotton swab dispenser provided here is an improved version of an initial design that only had a top lid. Refilling it with cotton swabs was therefore quite challenging. For this reason, I developed an improved version with a removable…
Wall holder (hanger) for Tuya TS0201 Temperature Sensor. Use double sided tape.
Requires Library https://www.printables.com/model/542305-updated-openscad-library-for-hsw-attachments
These are a drop in replacement for and work well with the standoffs that come on the Bessey K-Body REVOlution Parallel Bar Clamps. In my use case I needed more support on the face of my glueups so I designed these to augment the provided…
I have some parallel clamps from STIER which came without the distance pieces for holding the workpiece away from the bar of the clamp. So I modelled my own. Also the one from Bessey doesn't fit my clamp, it interferes with the placement…
Remix of "HSW Bessey Clamp Holder" by Isaac Holder.
GERMAN: Da ich keinen passenden Halter für meine Korpuszwingen gefunden habe, habe ich mir einfach einen eigenen designt. Da die Zwingen sehr schwer sind, habe ich die Halter in PA6-CF gedruckt mit 15% Inflill in Gyroid-Muster. Ich habe…
Another model today that was in my list - Barnacle Bess. She's a low level medium creature from Ghosts of Salmarsh - while there are crabs there weren't any called out specifically as Barnacle Bess so I wanted to make one to fill that…
Buddy3D Kamerahalter für Prusa CORE One – Verbesserter Deckel mit Schraubmontage Überblick Dieser Kamerahalter ist eine verbesserte Lösung für die Buddy3D Kamera des Prusa CORE One 3D-Druckers. Im Gegensatz zur Standard-Magnetmontage…
Halter um Bessey Revo Korpuszwinge anschrauben zu können. Fusion 360 Modell ist dabei. Habe das mal fix mit PLA gedruckt und das mehrfach verwendet. Bracket to screw Bessey body clamps Revo to the ground. BesseyProfil v4.f3d: Modell…
Am bessten mit Elephantenfuß Drucken!
Der Bügel dient zur besseren vertikalen Filament-Führung beim entladen.
This is a very simple, but effective, snap on cover for a Bessey 6" vice. They're pretty tight on the vice, which I prefer. There's no slop. I print them with 4 perimeter layers and 30% infill. I added a second version with a much thinner…
Bessey Corner Clamp Mount/Holder for Honeycomb Storage Wall (HSW)
Cette plaque remplace la semelle noire d'origine pour pour serrer facilement des coins tournés de 45°. Instructions d'impression Impression sans support mais avec bordure car la surface de contact est très faible au début de l'impression…
Alternative top for the Aubess Tuya Mini Smart Switch case with button Category: 3D Printing
Wanted to place my Bessey Strap clamps with all of the other clamps, so did a quick mockup.
Крепление на DIN-рейку для реле Aubess, Athom и аналогичных. @Для изготовления двух винтов M3x8 с потайной головкой или цианакрилатным клеем. @Также имеется модель со стопором, предотвращающим выход из строя реле.
EN Clamp pads to clamp round parts. Designed for Bessey clamps, might fit other brands as well. Square pad of about 24mm width and round pad of about 25mm diameter. DE Backen zum Klemmen von runden Teilen. Für Bessey Schraubzwingen,…
Diese Standfüße sind optimal für den Bambu. Habe ingesamt 3 verschiedene Höhen und diverse Wandstärken getestet. Genießt die Stille und trotzdem saubere Drucke…😅👍 Alle Teile können zusammen gedruckt werden. 4 Perimeter, 4 Layer, min.35%…
Printer brand: Flying Bear Printer: Ghost6 Rafts: No Supports: Yes. Resolution: 0.2 Infill: 100% Filament brand: Esun Filament color: grey Filament material: eTPU-95A Slicer: Ultimaker Cura 5.5.0 Printing temperature: 228 Celsium Build…
Half grips are cool, if you have large hands like me. But they are almost impossible to find (or just do not existe OEM). I use one on almost all my SLRs and rangefinder cameras, so took the habit of designing mine. Here's the Voigtlander…
A boat outrigger compatible with Lego Technic parts. Ein Bootsausleger passend zu Legotechnikteilen
I designed this model as a holder to hold 2 Bessey Horizontal Pull Down Clamps and 4-8 Bessey MFT Table Clamps with Ratcheting Lever. It's possible that other similar clamps from other manufactures can fit these clamps. The holder is…
My Solution This is a remix model to fit a very common economy grade Bessey clamp that is available in the United States. The Bessey clamp is GSCC and comes in common lengths 6", 12", and 24". My goal is to make this model more widely…
I have a set of four Bessey EZS11-4 clamps (they are sold in packs of two) and needed a wall mount for them. I drew up a quick design in F360 and used 3mm countersunk screws to bolt it to my tool wall. As the clamps are really light, I…
![Clamp Rack for 2.5" Throat Bessey Tradesman Series F Clamps TGJ2.5[xx]](https://media.printables.com/media/prints/936501/images/7157902_f049f508-01fd-4dda-a38e-0011d4178cb1_f748f9c0-55ab-4dab-98fe-fa885813aa96/pxl_20240706_052349242night.jpg)
![Clamp Rack for 4" Throat Bessey Tradesman Series F Clamps TGJ4.0[xx]](https://media.printables.com/media/prints/959721/images/7329459_6304714d-e8d0-40f6-a0b0-09132559cc41_f558a664-6bad-4a68-9974-daf1df658dd0/pxl_20240708_011551636.jpg)
