917 modeli
Update 2023: Bought an MT8 and added a fitting for it here. --- You want to customize your Magura MT5/MT7/MT8/MT Trail Calipers without spending a fortune on those expensive plastic rings? Look no further, this model has you covered.…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
Monkey Skull Chalice. HOW TO VID.
Wydruk około 14,90 €–18,22 € nettoWstępna wycena jednego wariantu
Contains an power socket cover blank and one with a Clip for e.g. Router power supply for german power sockets. Printing with PETG recommended due to flexibility. Enthält ein Steckdosenblanko zum selbst modifizieren und eine Clipversion…
Wydruk około 1,24 €–1,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printed with 0,2 mm Layers Just 70 Gramms
Wydruk około 2,19 €–2,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The original file didn't suit for my sockets, so I adjusted it. Now it's fitting like a charm. Big thanks to the creator if the original file for providing the files for editing.
Wydruk około 1,80 €–2,20 € nettoWstępna wycena jednego wariantu
This is a small numbered tag that can be used as indicators for various things, for example key rings or marking transitions in knitting. I originally printed as all black in PETG (since they were going to be used in yarn dyeing and need…
Wydruk około 1,68 €–2,06 € nettoWstępna wycena jednego wariantu
This is an adapter for the kenwood blender addon, where the kenwood machine connects with the blender through a connector with a plastic adapter inside. This is the adapter which is remodeled. It's best to print it in PETG because of…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I created a few kitchen appliances toys model, this is the first part. You can find the raw .stl and the sliced .3mf that helps multicolor prints with color change. If you like it, please buy me a coffee by pressing the “Support designer”…
Wydruk około 8,75 €–10,69 € nettoWstępna wycena jednego wariantu
Unfortunately, the otherwise rather nice budget guitar HBO-850 from Harley Benton comes with a simple pickup preamp without tuner. The preamp fitted is really long and slim, so it is difficult to fit other preamps into the same hole. I…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Nach dem Einsetzen einer neuen Philips Hue Lampe kann diese über den Schalter nicht mehr geschaltet werden. Und um unbeabsichtigtes schalten zu vermeiden habe ich nach Vorbild der Originalen Wippe eine Blende konstruiert. Verwendetes…
Wydruk około 0,95 €–1,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a simple device for hanging your hand immersion blender, either corded or uncorded inside your kitchen cabinet. It is composed of two parts so that the hanger part can be easily remove and replaced. In this case, it fits the…
Wydruk około 1,29 €–1,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bei einem General Austausch aller Heizkörperthermostate (Heimeier) wurde auch das Thermostat für die Fußbodenheizung ausgetauscht. Leider passt danach die Original Blende nicht mehr, da das Homematic IP Thermostat größer und rechteckig…
Wydruk około 4,54 €–5,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This Ninja Blender allows you to turn the blending capsule into a cup. When you make a smoothie though, it gets quite slick from condensation. This handle fits both the small and large capsules.
Wydruk około 2,76 €–3,37 € nettoWstępna wycena jednego wariantu
This thingy, that holds the whisk and liquidiser adapters in place in my SilverCrest hand blender broke at the snapping area. So I've decided to take my caliper, and recreate it in Fusion360. You don't have to buy a new blender! And if it…
Wydruk około 1,47 €–1,80 € nettoWstępna wycena jednego wariantu
We have a Beast Blender . The exposed blade system bothers me. I don't like it lying around, nor should it ever be mounted on the blender without one of the jar attachments (if you have one, you likely understand), however with a jar…
Wydruk około 4,72 €–5,77 € nettoWstępna wycena jednego wariantu
konstruiert mit OpenSCAD für Kopp Schalter Modellreihe ‘Paris’.
Wydruk około 0,28 €–0,35 € nettoWstępna wycena jednego wariantu
A version of the original holder to mount it with one of the four IKEA Kallax screws from top. All 4 positions possible (mirrored STL attached). Useful if you want to mount your ESGE Zauberstab or similar shaped brands, like BAMIX or…
Wydruk około 5,10 €–6,24 € nettoWstępna wycena jednego wariantu
Here is a collector's item. On a marché sur la Lune " or " Explorers on the Moon " is the seventeenth volume of The Adventures of Tintin, created by Belgian cartoonist Hergé. Milou or Snowy , the 1st dog on the Moon! Blender file &…
Wydruk około 0,96 €–1,17 € nettoWstępna wycena jednego wariantu
POE-Camera Halterung mit Blendschutz PoE camera mount with glare shield
Wydruk około 1,71 €–2,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
INTRODUCTION This is a Addon for Blender that allows you to create Miniature Maps of your adventures from just the GPX file that you can download from Komoot, strava, garmin or other tracking apps! No blender knowledge required SUPPORT MY…
This Pulley is universal and recommended for various purposes. Fine example is yachting. It is made from three parts and connected with M4 screw. In case you need different size, you can scale it to 125% using M5 screw, 150% using M6…
This is an STL printed laying down at low layer heights with different colored filaments with the goal of blending the filament colors to make both a multi-color and exaggerated depth image much like a cameo or bas relief. The file will…
Literally just a couple cubes made in blender, one sized 1mm in X, Y, and Z, and one sized 10mm in X, Y, and Z. I have no idea how it took this long for someone to upload one. Category: 3D Printing Tests
This is a remix of my rotating machine . All tools from that model are compatible with this one. Hardware you need: 10 M3 X 25 mm bolts & nuts 4 X skate roller bearing (608 size) STL are given on the recommended printing orientation, no…
Donut that I made in blender that I'm sure everyone who's used blender is familiar with.
The redesigned version of the original Prusa Pulley for PC-Blend. This lighter version saves material but is still perfectly strong using the PC-Blend Carbon Fiber. PC-Blend Carbon Fiber is slightly lighter than unmodified PC-Blend, with…
The infamous Blender donut, as tutorialized by Andrew Price on his YouTube channel Blender Guru. I wanted to print mine, so I split up the icing and donut into two parts. The sprinkles are just cut up pieces of filament glued to the top.…
Simple holder made to help drying of the makeup sponge. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 mm Infill: 20% Cubic Filament: Fiberlogy PETG Transparent Category: Bathroom
This is an adapter that allows you to mount the Garmin Varia radar to a Trek Blendr seat mount. This requires the blendr mount with a compatible saddle, as well as the insert from a Garmin Varia mount included with the Varia. The Garmin…
A file all assembled so I could make a lock screen for my phone. You can pose it whichever way if you have blender.
Halterung für Hörmann Garagentor Sender. Hab das Modell schon häufiger gesehen, aber nie zum Download gesehen. Somit habe ich es konstruiert. Vom Garagentorsender gibt es eine Variante mit Chrome und eine mit Kunststoffrahmen. Ich habe…
Brillenhalter für die Sonnenblende. Sollte am Besten mit einem Material gedruckt werden, dass hohe Temperaturen standhalten kann (ABS, ASA, etc. PETG). PLA kann höheren Temperaturen nicht so gut standhalten. Drucken auf der Seite liegend…
Uchwyt ułatwiający docięcie blendy/maskownicy (krzywe ścienne)
Funktioniert aufjedenfall mit PLA 15% Fill increase the rotating lid part to 101% to rotate freely (user upgrade)
Abdeckung für das Amarturenbrett des T4 am besten mit einer niedrigen Schichthöhe auf der Seite liegend drucken BambuLab Druckprofil more Designs
This is a replacement part for the Mueller Ultra-Stick Hand Blender (SKU MLR010001N) motor housing. This is the piece that connects to the main motor/drive head and not the separate “union” attachment pieces. **If you need the separate…
Mobius strip in the form of a number 8 Print instructions Category: Signs & Logos Summary Mobius strip in the form of a number 8 Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: No Supports: No Resolution: 0.2 Infill: 20%…
My Kenwood HB720 coupler was torn appart. So I designed a new one like the orginal part. The hole that is plugged onto the shaft is a bit tight. I needed to hammer it in with slight blows, but it seems to withstand the forces that come up…
This is a Garmin Varia saddle mount using the Bontrager Blendr saddle mount system. No hardware is needed in the model. Allen screws are needed to mount to the saddle, otherwise the Garmin mount is built in. It should be printed with…
The One Ring From of the poster of the original movie remade in HUEFORGE; Added the one ring on it is mate black, red white and gold Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA JAYO…
Beschreibung Diese Gegenlichtblende, welche auf das Objektiv mit Bajonettverschluss montiert wird verringert Streulicht Print Settings Printer: Prusa MK4 Supports: No Resolution: 0.2mm Filament: PETG black Update: 20260730 - Update…
This sunshade is compatible with the original BMW Motorrad smartphone holder "Connected Ride Cradle". Unfortunately, there is no sunshade for the cradle from BMW, so I made one myself. Mounting Instructions: unscrew the screw at the…
Drucken und aufsetzen auf die Kamera. Hergestellt für die OV 9732 Blendendurchmesser zum aufsetzen 14,2mm. Am besten in schwarz drucken. Die weiße ist zur besseren Ansicht. Funktioniert aber auch.
Bontrager Blendr Universal Light Mount Model W574066 Support: YES Material: PETG, ASA etc.
just a monkey, what did you expect? :D
Source: https://grabcad.com/library/airbuszeroe-blended-wing-body-concept-1 Category: Vehicles
The model is modified with less stroke on the hot side with the hope it won't jam and break. It is also modified to be easier to print with less supports. One model is for the passenger side and one for the driver side.
Die Anzahl der Wand Linien sollte auf 5 gestellt werden damit die Flügel stabiler sind ------------------------------------------------------------------------------------------------------- The number of wall lines should be set to 5 so…
Blender file of complete chassis ( no hardware or electrics) that Ive used for a couple of scale bodies. Thought I'd share in case others find it useful . Original files and design credit >> https://www.thingiverse.com/thing:4892947…
Depending on which hand you want to hold the razor in, you may need to mirror it in the slicer.
Update 2019 Aug 15: I was contacted by nichenke who tried to fit this on the Wahoo Elemnt and it didn't fit. He tried to modify the original design from the F3D file but it didn't update right. I tried and got the same results. I've found…
This is a sculpted blender model of a hand that I'm working on for use in a future project. The model stands just over 7 cm tall and prints well without support. How I Designed This Starting with a simple two dimensional model of a hand…
Einfach altes Teil abmessen, passende Abdeckung mit 2x Scheibe ausdrucken.
This is a fidget that you can put on your key chain to add some personality, or keep as a standalone toy. It can be easily customized through your choice of the different provided STLs, or even further by using the provided blend file.…
Dieses Modell ist eine PCIE Blende, die man zum abdecken eines ungenutzten PCIE-Slots verwenden kann.
wouldn't let me upload so giving thanks to those people where i got originals from in here https://www.printables.com/model/756373-flashforge-adventurer-5m-enclosure…
Its only an Blender file. You can render an 8k image. Settings are already good :-) Cover image is an 8k rendered image
Je veux me faire un rangement avec Gridfinity avec Blender mais je n'ai trouvé aucun fichier de départ pour la base des casiers. Alors j'en ai fait avec l'addon CAD Sketcher et je le partage avec vous. Les fichiers incluent toutes les…
In Teile zerlegt, um eigene Mods zu erleichtern (STEP Datei). / Spitted into parts to make it easier to create own modifications (STEP File).
A fun little triblader boomerang made in Blender. Print instructions Category: Sport & Outdoors Summary A fun little triblader boomerang made in Blender. How I Designed This Video Tutorial Companion Article The new idea here (at least for…
Organize Your Creative Space with the Perfect Brush Caddie! Keep your workspace neat and efficient with our 16-Place Small Blending Brush Caddie—designed for crafters, artists, and makeup lovers who demand both functionality and style.…
Steckdosen Blende Dies Teil kann eine handelsübliche "Steckdosen Blende" ersetzen. !!! ACHTUNG bitte vor Einbau von einer Elektro-Fachkraft prüfen lassen !!! !!! NUR VON ELEKTROFACHKRAFT EINBAUEN LASSEN !!! !!! Missachtung kann zu…
I use this model to simulate upgrades. I check how upgrades from the Internet fit the printer before printing. Furthermore, I change upgrades from the Internet for the printer if they are not suitable, or they are generally for another…
This project is not meant to be printed. Instead, it serves as a more-or-less standard model of the acrylic Prusa i3 MK1 as cloned by vendors like RepRapGuru. It is the single-plate design, with laser-cut Z motor mounts and top corners,…
Eigenkonstruktion, Vorlage ein Video in YouTube. Druck: in PLA in 2 Durchgängen. Die Schieber brauchen einen Rand um auf dem Bett zu halten. in dieser Lage, ist die eine schmale Fläche, eben und Fein, um die Reibung zu minimieren.…
I found this model by “kdv0403” on Thingiverse, and I really liked the concept, but I was having no luck customizing the model on my own with their provided file. I searched around on Printables and Thingiverse some more, but I couldn't…
Die Extra-Blende für die Eurobox bietet einen effektiven Schutz vor Staub, Schmutz und kleinen Tieren. Leicht anzubringen, bildet sie eine zuverlässige Barriere, um die Inhalte der Eurobox sauber und unversehrt zu halten. Eine praktische…
Diameter: 54mm
This project is meant to serve as a "standard library" of parts and materials which can be linked into some other project. I use it extensively in my own projects -- when I need a motor, for example, or a piece of 2020, a lead screw, a…
An adapter to fit the Garmin edge 530 to the blendr double stem gopro mount.
Simple Holder for a Beautyblender
This is a simple tree generator I made in blender 4.5 for a project. They should print without support, depending on the tree settings you use. You can customize the trunk spline, the number of leaves, the trunk height, and the seed. I…
I printed it once and too small, so be carefull which scale are you using.
Diese Gurtwickler-Blenden sind an vielen handelsüblichen Wicklern einsetzbar. Lochabstand 135/160/180/215 mm Gedruckt aus PETG, PLA sollte auch problemlos funktionieren. Materialbedarf ca. 17 -25g je nach Größe Druckzeit ca. 1 bis 1,5h…
Print this with your color change solution like the Prusa MMU, Palette, or AMS. This print will show you how 3 colors blend into each other using my layering technique. Below is a representation of how it works. As you can see from the…
I was experimenting with designing some shutter mechanics. My objective was to create a sleek design that minimizes the frame around the iris area. To achieve this, I opted for a 12-winged design. However, having 12 overlapping parts at…
Bricht wohl gerne mal ab und das wäre der Ersatz. Kann sein das er noch bissel straff sitzt. Vll aus TPU oder PETG drucken ansonsten nochmal melden.
Remix of Lacemaker's cover. Modified to lay flat.
SilverCrest Blender Clutch Replace
The Blender Startup File for 3D Printing (startup.blend) is a pre-configured file optimized for 3D printing workflows. It is specifically set up for working with millimeters as the default unit, ensuring accurate scaling when exporting to…
So it turns out the Bontrager Blendr system Garmin low mount doesn't fit the longer (100x series) Edge cycling computers. Fixing these little problems is what 3D printers are best at, right..? This model is based on the original…
3D Blender logo Print with 10% infill Layer height doesn't mater Use white filament for the middle piece, then pause at the smaller middle extrusion and change filament to blue
This is a professionally made STEP file for printing the HVAC blend door lever, which is no longer possible to buy.
After putting in smart lights I wanted to prevent them from being turned off accidentally through the manual light switches. This is a cover that can be fitted instead of the normal rocker in a Busch-Jäger Duro 2000 light switch. It looks…
A sliced up version of Suzanne the Blender 3D Monkey! The model has been modified to be printable without supports. The two halves will need to be glued together afterwards, however alignment is easy with the included peg.
My wife wanted a holder for her beauty blenders. So I whipped one up. It's meant to be wall mounted. I might remix it and make a standing version so check back. 7/28/19 : Resized holder to better fit wet blenders. Base added so it can be…
This is a common failure for Dodge vehicles. Mine made a clicking noise when changing from hot to cold and got stuck on hot only, then continued making a clicking noise for ~10 minutes, sometimes even with the engine off and key removed.…
Depending on which hand you want to hold the razor in, you may need to mirror it in the slicer
This coupling fits for the hand blender Type 4191 from Braun. It may be possible, that it fits for other hand blender's too. Category: Hand Tools
1-DIN Radioblende VW Viele Fahrzeuge haben werksmäßig einen Doppel-DIN Radioschacht, bei dem nach der Umrüstung auf ein herkömmliches 1-DIN-Radio ein Schacht frei bleibt. Dieses Ablagefach ermöglicht es Ihnen das originale VW Doppel-DIN…
Meine fehlende Rohr-Abdeckung von meiner Heizung habe ich durch diese TPU-Version ersetzt. Google Translate: I replaced my missing pipe cover from my heater with this TPU version.
Very strong shelf holder, I loaded it 20kg. It is easy to put on 6-8mm dowels. The depth of the shelf is 15-20cm. Update 06.10.2020 Remodeling in Blender 2.90. Much less lag in comparison with the old version.Gyroid mesh is now not…
Blender for two-component epoxy resin and/or Paint and/or other liquids with Bayonet Mount for electric screwdrivers/Drills. Standard Hexagonal Section (7mm) Height: 115mm (from the screwdriver/drill mount) Available in 3/4/6 blade…
Heizungsrohr-Blende d28
A saw handle, with nice traditional style ergonomic grip printed in3 pieces, no supports. Video here: The design was made to fit ¼-20 bolts and nuts, with a bolt pattern corresponding to a Stanely general purpose 20-086 18" hand saw.…
Square hood for fuji 23mm f2. It's designed to fit snugly on the original hood mount.
Spojka pro ruční mixér SSMS 600 C3 z Lidlu. Když se zasekl nástroj tak původní spojka povolila v tisícihranu a motor se otáčel naprázdno dál. Tím neříkám že tahle nepovolí... Netuším jestli je to nejlepší volba, ale tiskl jsem z PLA, 100%…
Es empfielt sich ASA.
I couldn't find a mount that worked well with the S1 so I made my own. This is used to mount Devin Montes' Filament Blender to the Ender 3 S1 with 1 Screw (Same screw that comes in accessories pack or equivalent) The Screw is on loose to…
