Wyniki wyszukiwania: brace

Sortowanie

2243 modeli

P
Printablesraykamp

Prusa i3 MK3s black PSU replacement frame brace with M4 bolt holes

This part was designed this for a Prusa i3 MK3S with an accompanying IKEA Lack enclosure . In the instructions for building the enclosure, it's recommended that you replace the power supply unit (PSU) with a brace like this, and relocate…

Pobrania
11 350
Polubienia
450
Ocena
4,94
P
PrintablesPrusa Research

Wrist brace (splint) - a lighter version

Wrist brace (splint) - a lighter version A lighter and less rigid brace, suitable rather for relieving pain caused by a sprained wrist or post-surgery recovery. Not suitable for fractures. Use undercast padding, fixated with velcro straps…

Pobrania
5393
Polubienia
1261
Ocena
4,95
P
PrintablesPrusa Research

Wrist brace (splint) for either hand

Wrist brace (splint) for either hand A more rigid brace, suitable for broken wrist treatment, i.e. fracture of either the adjacent radial bone, ulnar bone, or wrist bones (excluding the scaphoid bone fracture, which requires fixation of…

Pobrania
3297
Polubienia
893
Ocena
5
P
PrintablesMikolas Zuza

PSU replacing brace for MK3

If you remove the PSU from your MK3 (for example to place it outside of an enclosure), you can use this brace to maintain the frame stiffness. This was tested with the older silver PSU mount Print instructions Prints without supports

Pobrania
3232
Polubienia
192
Ocena
4,89
P
PrintablesShmoee

Friendship Bracelet Maker Braiding Loom

These disks are tools used for making friendship bracelets. I created 8 and 16 slot versions in Fusion 360. To use, start with 7 strings about a foot in length that are tied together on one end in combination with the 8 slot disk. Push…

Wydruk około 1,33 €–1,62 € nettoWstępna wycena jednego wariantu

Pobrania
1166
Polubienia
164
Ocena
4,88
P
PrintablesCl@Gr3

Bracelets making support - Supporto per braccialetti

ENGLISH I've always had a passion for Paracord and some time ago I met BlackSquirrel from whom I buy the materials to make my creations, they have a great assortment and well done guides and tutorials on how to make bracelets and more . I…

Wydruk około 0,54 €–0,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
208
Polubienia
59
Ocena
4,5
P
PrintablesJohnM

Garmin Zumo XT XT2 TomTom sat-nav mount adaptor for BMW GS screen brace

Simple adaptor plate to use the rear of the BMW navigation cradle with the fitting bracket for a Garmin, TomTom or other standard four-screw mount

Pobrania
116
Polubienia
5
Ocena
0
P
PrintablesKyuubiNight

Humpback whale Bracelet holder and ring tray

This is a model I made with the idea of making a whale breaching. I went with a bracelet holder and ring tray, since prints gotta be practical or it's rough to get it out there. Prints well in most materials, no supports needed! The file…

Pobrania
111
Polubienia
21
Ocena
5
P
PrintablesBlackriver

friendship bracelet maker / Freundschaftsbänder Helfer

Hilfsschablone zum knöpfen von Freundschaftbändern

Pobrania
83
Polubienia
16
Ocena
5
P
PrintablesNate

Bat Bracer

I threw this model together so that I could print it for some kids who have been asking me for it. Didn't see it anywhere else in my searches so here we go. Sized to decline in radius, generally speaking, to match forearm composition as…

Pobrania
71
Polubienia
26
Ocena
0
P
Printablesundoz

Box for Braces

Customize in Prusa Slicer with a name, logo, etc. Lanyard A lanyard can be attached at the two slots on each side. Guide the lanyard through both and secure it with a knot. This way the lanyerds pull the box closed when worn arround the…

Wydruk około 1,70 €–2,07 € nettoWstępna wycena jednego wariantu

Pobrania
66
Polubienia
7
Ocena
0
P
PrintablesRay Fox

Medical Alert Bracelet

Generic Medical Alert Braclet. Although does not specify condition, it alerts EMTs and other medical personnel there is a condition they need to further investigate. First layer adhesion is critical as there are 80+ individual parts. If…

Pobrania
55
Polubienia
12
Ocena
0
P
PrintablesMarina

Interchangeable color bracelet Valentine's day version

Here is a special "Valentine's Day" version of the bracelet in interchangeable colors. Print tabs of different colors and change according to your desires and clothes!!! Printed in less than two hours. Little gift of the day for your…

Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu

Pobrania
55
Polubienia
22
Ocena
0
P
PrintablesMrRestrained

Wooden Bracer

This is a wooden bracer, used for my fae witch cosplay. It prints in one piece on a Prusa MINI. File is pre-supported. File is printing now, so will be able to upload a better photo soon

Pobrania
47
Polubienia
20
Ocena
0
P
PrintablesRuhel

Anker Soundcore Q45 headband brace

I purchased the Anker Soundcore Q45s for my son to use in the gym. The headphones are great but the headband is not strong enough for gym use. These allow for strengthening the band. I used black Gorilla tape to adhere the brace to the…

Wydruk około 0,92 €–1,13 € nettoWstępna wycena jednego wariantu

Pobrania
46
Polubienia
8
Ocena
0
P
PrintablesRay Fox

Large Type 2 Diabetes Bracelet

A large man's braclet to alert EMTs and other medical personnel of type 2 Diabetes dondition. Printed with 0.4 Nozzle at 0.20 layer, support only on female end of clasp. Check continuously the first layer. It consists of 80 individual…

Pobrania
45
Polubienia
1
Ocena
0
P
Printablesuktricky

HomeLab Rack Side Brace and 1U Blanking Plate

Building my own homelab and just purchased the rack rails to 3d print my own components - Created these side braces to make a rack that is a little over 250mm deep to sit on my desk. I've fastened these to the rails with M5 bolts, a small…

Wydruk około 5,29 €–6,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
24
Polubienia
6
Ocena
0

Friendship Bracelet String Separator

This is a string holder that can be used on a table top or attached to a clipboard to help keep the strings sorted while weaving and knotting a friendship bracelet. Find patterns and tutorials for friendship bracelets at braceletbook.com.

Wydruk około 1,27 €–1,55 € nettoWstępna wycena jednego wariantu

Pobrania
16
Polubienia
7
Ocena
0
P
Printablescaptaincorey

HyperScrambler2 Rear Fender Brace

The rear fender on the HS2 braces rattled all the time. This brace was created to end the rattle.

Pobrania
9
Polubienia
0
Ocena
0
P
PrintablesFilliFuu

Lucky Charm Baby Flexi Dragon Bracelet

Cute baby dragon bracelet, multiple profiles including A1 mini with various sizes for adults or children. All print in place without supports and that's it. Carefully open the mouth to use the link. Avoid using silk for the mouth as silk…

Pobrania
6936
Polubienia
918
Ocena
4,67
P
PrintablesCore3D.tech

TPU Bracelet

simple but very expandable and tough bracelet. Flexible Filamanent ONLY! I was asked to make a hollow version of this to add some glitter inside. I've added the hollow version file as well (walls and corners do get thin but he was able to…

Pobrania
6352
Polubienia
460
Ocena
4,91
P
PrintablesFilliFuu

BASIC LUCKY CHARM BRACELET

Basic profile containing over 9 sizes, new improved links and lock, easy to print with no bridges in the links. This is the standard, non dragon or unicorn bracelets, completely new and improved, with new facial designs, link design and…

Pobrania
5970
Polubienia
1566
Ocena
4,6
P
PrintablesPrusa Research

Finger Brace (splint)

Finger Brace (splint) Suitable for broken or dislocated middle segments and fingertips, or for post-surgery recovery of these body parts. When elongating the brace in the slicer (scaling it up in the longitudinal axis) so it extends to…

Pobrania
5574
Polubienia
1122
Ocena
4,83
P
PrintablesBaGooN

Chain Link Bracelet

A chain link bracelet that you assemble yourself by snapping the links together. For me, 11 links made the perfect fit. Use 15mm per link as a guide and adjust the number of links according to your wrist size. A smaller version with 13mm…

Pobrania
4920
Polubienia
1306
Ocena
4,73
P
PrintablesBrolin Workshop

Prusa Mini Z-axis brace

Z-axis brace to stiffen up the Z-axis of the Prusa Mini 4pcs M5x12 and 4pcs t-nuts for mounting, optional is a M5 washer (10mm OD , 1mm thick) Thick version need 2pcs M5x25 and 2pcs m5x12. UPDATE : Added .f3d file for remixing purposes..…

Pobrania
4880
Polubienia
985
Ocena
4,93
P
PrintablesErik

Updated: Bracket bundle: 14 L-brackets and 16 corner braces (3mm and 6mm thick versions)

I made this bundle of brackets so you can print your own when needed. Both L-shaped brackets and corner braces, inside and outside versions. All brackets are 3mm thick, with a 6mm thick version for extra strength when that is needed. The…

Pobrania
4647
Polubienia
1403
Ocena
4,94
P
PrintablesVictor

Prusa MINI Z-Axis Support Brace

A support brace for the Prusa MINI to stiffen the connection between the Z-axis and the Y carriage. Attach to the 3030 aluminium extrusions using M5 x 12 mm hexagon head cap screws and T nuts (available on Amazon, eBay, AliExpress, etc.).…

Pobrania
4320
Polubienia
841
Ocena
4,93
P
PrintablesPrusa Research

Finger extension brace (splint)

Finger extension brace (splint) Suitable for treatment of injured extensor in the fingertip (i.e. “mallet finger”). Total fixation period of 6 weeks. Also suitable for fractures of the fingertip, which lead to the same symptom - finger…

Pobrania
4158
Polubienia
987
Ocena
5
P
PrintablesM4NU

Unchain My Heart - Print in place bracelet

A simple and fast printed bracelet with heart looking rings and a simple lock system. 3 sizes : 170mm (11 hearts) 200mm (13 hearts) 230mm (15 hearts) Some ideas : Print 2 sizes to make intricated bracelets. Clip several bracelets together…

Pobrania
3739
Polubienia
686
Ocena
4,78
P
PrintablesKalleKnall

Prusa MK3/S Einsy Raspberry PI 4B/3B Enclosure with support Brace

I've designed my own very strong PSU-Replacement-Brace (see my Prints) and desided to have the same one on the other side. Here's my new "from the scratch" Design for an EINSY Enclosure with Raspberry PI 4B (2B/3B) and Voltageregulator…

Pobrania
3398
Polubienia
714
Ocena
4,8
P
PrintablesRepoholy

Floral jewelry: Daisy - A set of earrings, bracelet and necklace

A set of floral jewelry. Available with mounting hole at the top of the blossom or included in one of the petals. You can choose from 4 daisy sizes. Dimensions Thickness: petals are 1 mm and 1.5 mm thick the middle is 1.5 mm thick → The…

Pobrania
3030
Polubienia
620
Ocena
4,88
P
PrintablesKN16

PP MCXish Folding Brace

A folding pistol brace inspired by the legendary Sig Sauer MCX Thin Folding Stock. It attaches to anything with a Picatinny rail and is a stylish accessory to your favorite PDW. There are detailed printing and assembly instructions under…

Pobrania
2751
Polubienia
215
Ocena
5
P
PrintablesRetro Frog

Gamecube GC Video Support Brace for Carby, Prism and GCHD mkII

Have you noticed that the popular GC Video HDMI dongles for the Gamecube sag when a heavy HDMI cable is plugged into it? This simple brace latches onto the Gamecube vents below the Digital Video port and support the dongle from sagging.…

Pobrania
2696
Polubienia
156
Ocena
5
P
PrintablesPrusa Research

Palm brace (splint)

Palm brace (splint) For fixating the wrist and palm (metacarpal fractures). The brace must be shaped into a neutral position, to prevent the shortening of tendons and ligaments and placed on the FRONT side of the forearm (see picture). If…

Pobrania
2653
Polubienia
714
Ocena
5
P
PrintablesAlexM

Flexi bracelet (fun bracelet for kids)

My daughter wanted to wear AP_Design 's the flexetki toy as a bracelet, so I combined it with Mistertech 's Strap buckle (the only buckle I could find that prints flat) into a sort of bracelet. You can find my second model, that can be…

Pobrania
2578
Polubienia
343
Ocena
4,89
P
PrintablesDvG3DAtelier

Chain Link Bracelet – Slim, Reversible Jewelry, Adjustable and more Secure Fit

This remix of the original chain link bracelet is slimmer and thinner, yet still provides enough space to showcase eg. the carbon pattern. The smoother design reduces skin friction for more comfortable wear. It offers a stronger assembly…

Pobrania
2448
Polubienia
811
Ocena
5
P
PrintablesBlargedy

Pastamatic Filament Spool Winder Modifications: Braces and 5kg Spool Support

Pastamatic Filament Spool Winder Modifications Changelog: 2024-02-23 Added options for huge spools and small spool with spacers. Thanks to Ch3vr0n for the idea and testing of the spool spacers Modifications to GekoPrime's winder to better…

Pobrania
2393
Polubienia
262
Ocena
4,89
P
PrintablesFilliFuu

Lucky Charm Flexi Unicorn Bracelet

Unicorn bracelet similar to the dragon bracelet i designed earlier. All print in place without supports. All files painted, just erase painting or change if you want a fast print or allow adaptive layers for more detail. Enjoy.

Pobrania
2393
Polubienia
345
Ocena
4,67
P
PrintablesMiceciCZE

ROBAK 2 Super Bright LED BRACE

Super Bright LED Light Bar RC Car Roof Lamp CH3 Control for 1/10 RC Crawler Axial Capra SCX10 II 90046 RGT EX86100 TRX6 TRX4 D90

Pobrania
2279
Polubienia
35
Ocena
0
P

Flexi Love Heart Bracelet | 11 Sizes

I added 💕 hearts 💕 and a buckle to my Flexi Keychain Fidget for Valentine's Day! With 11 sizes to choose from you'll find the perfect fit for your SO! 💕 The 12 link bracelet is long enough to fit comfortably on my adult wrist, and the 10…

Pobrania
2224
Polubienia
476
Ocena
4,78

Pony bead | Standard 6mm x 9mm | Beads for friendship bracelets and other beaded crafts! | Filament swatches

I recommend making these with silk PLA filament for extra shine ✨ Print settings: 0.2mm layer height 0.4mm nozzle Compatible with my other models: Craft Tweezers Beedle Friendship Bracelet Making Tool ✨If you like what I do✨ Follow me for…

Pobrania
2174
Polubienia
450
Ocena
4,88
P
PrintablesPrusa Research

Pinky finger/thumb brace (splint)

Pinky finger/thumb brace (splint) Suitable for fractures of the fifth metacarpal bone, to stabilize injured ligaments of the metacarpophalangeal joints (between fingers and a palm). Depending on the length, it can be also used to fixate…

Pobrania
2125
Polubienia
544
Ocena
5
P
Printableshapedevee

Simple gantry support (metric/inch), Z-brace for Ender-3 V3 KE/SE

For all information and recent models look at https://www.thingiverse.com/thing:6516352 .

Pobrania
2104
Polubienia
565
Ocena
5
P
PrintablesCodeweaver

Friendship Bracelet Loom/Station

This loom/station will allow you to more efficiently make friendship (macrame) bracelets. Especially the more complex patterns with 10+ strings. Suggested use : The bottom arc has 50+ slots to fasten the strings quickly. They are held in…

Pobrania
1999
Polubienia
479
Ocena
4,8
P
PrintablesdePrintinator

Flexy Hexagon Bracelet Remastered (TPU/PLA)

Filaments Flashforge Burnt Titanium PLA Hatchbox Sparkle Gray PLA Overture Black TPU Print Settings Base settings were the "0.20mm DETAIL" preset in Prusaslicer for Original Prusa XL - 5T 0.6 nozzle profile. I modified the following: 3x…

Pobrania
1941
Polubienia
387
Ocena
5
P

APB3 - Adjustable Pistol Brace

This project is currently in BETA (as of April '24) Specifically, the longevity and durability of the PLA+ printed locking pin needs to be further tested. UPDATE: A new experimental Reinforced Locking Pin has been added to the print…

Pobrania
1890
Polubienia
225
Ocena
5
P
PrintablesM4NU

Skull Chain - Print-in-place bracelet

A simple and fast printed bracelet with skull looking rings and a simple lock system. To open/close the bracelet : clip one side and then the other one. There is a hole in one tooth to spot the skull with the locks. 3 sizes : 185mm (9…

Pobrania
1790
Polubienia
616
Ocena
4,76
P
PrintablesBugman_140

The Final Embrace

Here are the files for The Final Embrace A bust of Death himself, the Reaper prints separately from the base to allow different materials to be selected. I printed my Reaper with a little support painted under the jaw bone and 5% infill…

Pobrania
1621
Polubienia
515
Ocena
4,97
P
Printablesroman_hegglin

Bracelet - Voronoi Style

Another voronoi bracelet! There are four different Models: A-D A is rough, B-D have a finer Voronoi-Mesh. (See preview!) Category: Bracelets

Pobrania
1603
Polubienia
284
Ocena
4,5
P
PrintablesEd Daniel

Corner brace for IKEA Besta cabinet

My Besta cabinets were anything but rigid. Aligning the doors on the front of them was next to impossible! So I whipped up this corner brace in Onshape. You probably don't need one on each corner. Even one makes a difference, but two on…

Pobrania
1567
Polubienia
245
Ocena
5
P
PrintablesSeanZep

Print-In-Place Chain Link Bracelet

A print in place chain-link bracelet. Requires good build plate adhesion. I added a split version for people that have smaller build plates. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution:…

Pobrania
1542
Polubienia
216
Ocena
5
P
PrintablesDonaldSayers

Sidewinder X2 Simple brace

Quick remix of this brace to fit the new screw hole position of the sidewinder X2. To be clear this will not fit with the second part of the brace from the original (threaded rod.) There are now braces that fit correctly for the X2 if…

Pobrania
1418
Polubienia
149
Ocena
5
P
PrintablesPlexi

Survival Bracelet

Lost in the wilderness? A few feet of paracord for making a bow drill fire set or for a thread to fish with might save you. This bracelet gives you 7 feet of paracord right on your wrist. Both styles of buckle are remixes of designs used…

Pobrania
1386
Polubienia
329
Ocena
4,72
P
PrintablesJason Walton

Ender 5 Cable Management Brace

The Ender 5 comes with a bunch of zip-ties for tying up all your cables neatly, but anyone who's actually tried to do this knows that the cables are all just a little bit too short. I was thinking about adding extension cables to my…

Pobrania
1365
Polubienia
269
Ocena
4,81
P
PrintablesMongrel

Centauri Carbon PTFE Brace Bracket.

I've made my mod interchangeable with Ccraft3D design so you can take your pick of which pieces suit your needs.

Pobrania
1348
Polubienia
250
Ocena
5
P
PrintablesGeekMomProjects

Lucky 4-Leaf Clover Bracelet (Print in Place)

NOTE: I've updated this print with versions containing looser tolerances that may work better for some printers. The angled leaves of the clover-shaped links on this print-in-place bracelet look very nice when printed in dichromatic PLA,…

Pobrania
1341
Polubienia
251
Ocena
4,89
P
Printablesburtronix

Geo-Cube Necklace-Bracelet with Twist-Lock Clasp

Geo-Cubes are interlocking print-in-place cubic shapes that I designed & posted last year. I've been experimenting with scaling them to different sizes & arranging them on the print bed in different ways to get longer lengths of…

Pobrania
1325
Polubienia
266
Ocena
4,67
P
PrintablesEnhe

Flexible Chain Bracelet

These bracelets feature a chain-like design, offering flexibility and adaptability for various uses. Their bendable structure makes them ideal for projects requiring a non-rigid connection or decorative elements. Durable yet flexible,…

Pobrania
1311
Polubienia
199
Ocena
5
P
PrintablesCisco3D

Soft Bracelet

Flexible bracelets that prints in Vase mode. A quick print that looks very nice Prusa PETG Yellow gold showing Some designs to pic from Scaling reference (roughly) 100% ----- 60mm Diameter 115% ----- 70mm Diameter 130% ----- 80mm Diameter…

Pobrania
1306
Polubienia
305
Ocena
5
P
PrintablesMakkuro

Print-in-place fidget bracelet / bangle

Have fun with this rotating fidget bracelet! It consists of two parts which can rotate freely around each other. I uploaded many sizes (inner diameter in mm from 54mm to 83mm, please use the conversion table below in case you are used to…

Pobrania
1279
Polubienia
222
Ocena
4,83
P
PrintablesDaHouzKat

Prusa MINI Z-axis brace REMIX

This is a remix of the original Prusa Mini Z-axis brace published by Hannes-b3 Small groove to fit with the Prusa Mini Low Profile Z axis Squash Ball by 4nthonylin Bigger holes to fit with M5 Hex Socket Head Cap Screws Added model Ultra…

Pobrania
1277
Polubienia
295
Ocena
4,91
P
PrintablesT4SKOR

Bracelet

If you can Buy me a coffee :)

Pobrania
1272
Polubienia
171
Ocena
4,5
P
PrintablesJack

Chain Bracelet

PrintInPlace bracelet chain

Pobrania
1244
Polubienia
231
Ocena
5
P
PrintablesPrusa Research

Big toe brace (splint)

Big toe brace (splint) Not suitable for walking! The brace is neither sturdy nor comfortable enough for that - only for fixation, but without stepping on the injured foot. For pain relief from non-dislocated fractures of the first or…

Pobrania
1209
Polubienia
426
Ocena
5
P
PrintablesAzumetrics

Cosplay Arm Bracer v1 (Djeeta Granblue Fantasy)

A cosplay armor/arm bracer in 2 parts. Need to be scaled to whatever size your arm is. This was the size that fit my slightly bigger arms. Also might be in an extremely tiny or large scale, might have to scale it up by 10000% or…

Pobrania
1207
Polubienia
522
Ocena
0
P
PrintablesNeozoen

Neo parametric frame brace

Update 20260914 I uploaded a fixed version as f3d and one .step-file with M5 bores. ____________________________________________________________________________________ The original design by VEZ3D looks awesome but i needed it in…

Pobrania
1205
Polubienia
223
Ocena
5
P
PrintablesGeekMomProjects

Print In Place Rotating Hearts Bracelet

A great print for Valentine's Day! The uploaded models of the bracelet have two sizes: 6 links (approximately 190 mm, 7.5") 7 links (approximately 215 mm, 8.5") You can remix the model to add more links or change the heart to a different…

Pobrania
1203
Polubienia
269
Ocena
4,91
P
PrintablesGP

Table angle bracket / corner brace (LACK-compatible)

Light tables like IKEA LACK family are not sturdy enough to withstand horizontal vibrations caused by a printer, they start shaking and wobbling worsening print quality, causing even more ringing, etc. This simple brace will make a table…

Pobrania
1189
Polubienia
196
Ocena
4,88

Humeral Brace

This is a 3D printed humeral brace which is designed to increase effectiveness of the fracture treatment by providing customized solutions as an alternative to conventional solution. The inner and outer part of the brace ensure better air…

Pobrania
1167
Polubienia
395
Ocena
4
P
PrintablesNikoFly

Bracelet making kit

Hello maker friends, here is my workshop design for making bracelets, paracord or other fantasy of all kinds, have fun young and old with this support designed to be practical for making bracelets!! entirely print on mini <3 filament :…

Pobrania
1161
Polubienia
831
Ocena
5
P
PrintablesFilip

Lego Bracelet

Lego bracelet compatible with LEGO bricks. The bracelet is available in 2 sizes, but I also post all the elements separately if you want a different size. If you have any problem with the fastening, feel free to write to me and I will try…

Pobrania
1125
Polubienia
385
Ocena
5
P
PrintablesKalleKnall

MK3 PSU Bracket / Brace

Just an other Prusa MK3 PSU-Bracket / Brace. My Frame has a Skew-Value of 0.01 ! (Support Menue) Please have a look on my other Prusa MK3 Prints https://www.prusaprinters.org/social/1247/prints It fit's between Mainframe and Rearplate,…

Pobrania
1112
Polubienia
132
Ocena
4,7
P
PrintablesWinston Moy

xTool S1 Honeycomb Brace

I originally printed this in PLA since it doesn't need to be super rigid, a little compliance is good. However I would recommend PETG if you can. After a few months, PLA will creep and doesn't bounce back as much. Good amount of pressure…

Pobrania
1103
Polubienia
143
Ocena
5
P
Printableswimillie

Basic pla/tpu Bracelet

It be a bracelet A bracelet it be Turn your ears Listen carefully, This small bracelet Won't fit you If not made out of tpu! If you don't have tpu filament, the first version of this bracelet is not for you. Something very stretchy must…

Pobrania
1086
Polubienia
112
Ocena
4,75
P
PrintablesMTB3D

bracelet

A simpel bracelet designed by a friend of mine. Printed by https://www.mtb3d.com/

Pobrania
1058
Polubienia
142
Ocena
5
P
Printableseggy

Bracelet Holder

Two version of the bracelet stand, printable as a solid or a hollow stand. Both versions do not require supports. I printed mine out of Bambu Marble PLA which makes the layer lines virtually invisible. Printed on a BambuLabs P1S. Does not…

Pobrania
1051
Polubienia
144
Ocena
5
P
PrintablestbkMAKER

Rope Bracelet

3D printable wearable rope bracelet (I don't have TPU but you should print this in TPU) Model has no internal holes and was designed in fusion360. This simply means it will be easier to print as all dimensions have been calculated for 3D…

Pobrania
1029
Polubienia
181
Ocena
5
P
PrintablesJon

Voron V0 Frame Brace

In my search for a frame brace for my Voron V0, I couldn't find anything I liked. So, I created my own. This design is inspired heavily by the VzBoT frame brace . Because the brace will intersect with where the door magnets are, there is…

Pobrania
1012
Polubienia
189
Ocena
4,75
P
PrintablesOkan Özsoy

3D Printable Bracelet Holder: Stylish Organization for Your Jewelry Collection

Our 3D printable bracelet holder template offers you the opportunity to create your own stylish and functional jewelry organizer. This template allows you to elegantly display your bracelet jewelry while keeping your jewelry collection…

Pobrania
962
Polubienia
103
Ocena
5
P
PrintablesD!nu

VzBot Frame Brace for 3030 Extrusions

I adapted the great VzBot frame brace for my 3030 extrusions. Made it wider and added holes that fit M6x12 bolts. That would be the “medium” one, about 20cm long. Based on this one, I created a “short” (10cm) and a “long” version (29cm).…

Pobrania
959
Polubienia
182
Ocena
5
P
PrintablesAdrianGarside

Plain bracelet

Just a simple bracelet I made for my wife. Nothing special. I printed it with a sparkly purple PLA as that's her favorite color and it gave it some pop. That's the one in the picture but note that I doubled the height in the slicer before…

Pobrania
948
Polubienia
94
Ocena
5
P
PrintablesEasterlightning

Felixible bracelet

Found the 'Flexetki Skill-Toy' and thought it needed a closure so it could be worn as a bracelet. with a little extra colour to it. Also made it a little smaller in height and bigger in length. Works just as well in single colour like the…

Pobrania
946
Polubienia
151
Ocena
4,4

First Layer calibration/ Kalibrace první vrstvy

English version bellow. Buďte opatrní pro příliš nízké nastavení trysky, můžete si poškodit plát! Kontrolujte nastavení výšky pomocí očí v úrovni podložky! Model slouží pro kalibraci první vrstvy. Zvolte si počet “zoubků” podle toho jaké…

Pobrania
941
Polubienia
42
Ocena
5
P
Printablesskore87

Quick-Remove Storage Insert for SBA3 Pistol Brace

Modeled this to fit the SBA3 Pistol Brace. This is intended to be used for storage and display only as having this installed in your pistol brace while in use may constitute modifying your brace to be a stock. I would recommend using a…

Pobrania
927
Polubienia
57
Ocena
5
P
PrintablesJSB

Voron 2.4 Top Corner Brace

Inspired by the many variations of corner braces and brackets for smaller Voron printers Corner brackets that fit top corners for Voron 2.4 printers (tested on a 300x300 Voron2.4). Marginally increases rigidity of the frame. Various slots…

Pobrania
906
Polubienia
218
Ocena
5
P
PrintablesReso

MK3S+ black PSU replacement brace

I changed it a little. Added the hexagons for looks and a small chamfer around the model. Printed the brace with 30% infill. G-code is with standard Prusament 0.20 profile for PETG.

Pobrania
872
Polubienia
125
Ocena
4,9
P
PrintablesMeister Edel

Kids necklace bracelet beads pearls DIY jewelry 100% FDM

Heyho Here I have various beads that you can use to make necklaces, bracelets or other decorations :) Scalability I used a 1mm thread. Theoretically, however, threads up to a thickness of 1.6 mm should also fit well. The larger the…

Pobrania
864
Polubienia
357
Ocena
4,83
P
PrintablesHamroš

Thumb brace

Thumb brace for fixation of the 2nd thumb joint. I designed the brace when I dislocated my thumb while climbing. It works pretty well for me, but I have small hands. You can just change the scale to make it fit you properly. If you extend…

Pobrania
854
Polubienia
96
Ocena
0
P
Printablesdriftrotor

Voron V0 / V0.1 / V0.2 / R1 Kirigami Bed Brace + Fan

UPDATED! these have all been made stiffer! Also please note that for the illustrative purposes the kirigami frame a brace are depicted upside-down. After running the LDO Kirigami Bed Kit and loving it for over a year I found only one…

Pobrania
853
Polubienia
182
Ocena
4,95
P
Printablesroman_hegglin

Voronoi Bracelet

Voronoi Bracelet: Two types to choose from. Which one do you like the most? Category: Bracelets

Pobrania
833
Polubienia
126
Ocena
4
P
PrintablesJeremyKMac

Kitchen Drawer Organizer Brackets/Braces

My wife wanted to be able to customize our drawers in the kitchen. She found some ideas on Pinterest, but I decided to make a system for all of our drawers. We purchased some poplar planks (1/4" x 2 1/2" x 48") and cut them to the various…

Pobrania
812
Polubienia
477
Ocena
4,89
P
PrintablesYpsilantea

MCXish folding brace with extra beef

Automatic support generation seems to work fine, use your discretion for what your printer can handle. Unlike the original version, the brace pieces can be printed flat on the bed. I used 6 top+bottom walls to add some stiffness. BOM is…

Pobrania
788
Polubienia
65
Ocena
0
P
PrintablesMongrel

Centauri Carbon PTFE Brace Bracket VERSION 2

Centauri Carbon PTFE Brace VERSION 2. This version you can push down on the guide insert to release the PTFE tube without having to remove the guide plate.

Pobrania
777
Polubienia
149
Ocena
4,6
P
Printablesjakned

modular chain bracelet

I made modular bracelet system - just for fun and to learn new techniques. How to make it - for a simple bracelet - print complete chain with proper lenght, connector and pin. Every extra part measures 1cm. Edit2921016: Sorry people,…

Pobrania
729
Polubienia
166
Ocena
4,67
P
PrintablesStangalang

Taylor Swift Eras Tour Stage Bracelet Holder

Modeled after the layout of the Eras Tour Stage. Customize text with secret songs and venue. I used a color change stop on my MK4 and 3 perimeters with a 10% infill printing in PLA. Can also change the center and bottom text to be joined…

Pobrania
724
Polubienia
106
Ocena
5
P
PrintablesAlexM

Flexi bracelet #2 (fun bracelet for kids)

Another variation of a flexi bracelet for kids. You can find my original flexi bracelet here .

Pobrania
719
Polubienia
90
Ocena
5
P
PrintablesMaxT

Prusa Mini Z-axis support brace, by MaxT (REMIX)

https://www.buymeacoffee.com/maxt ---------------------- What? This is a Z-axis support brace to stiffen up the Z-axis of the Prusa Mini/Mini+. You want it if you move your printer from time to time, if you raise it using Mini Base mod,…

Pobrania
710
Polubienia
148
Ocena
4,89
P
Printablesmijo11

Bracelet maker | bracelet tool

Bracelet making tool. How to print? 20% infill 0,2 mm layer Enjoy making your own bracelets!!! Post realization - THANK YOU!!!

Pobrania
699
Polubienia
261
Ocena
5
P
PrintablesUWcharlie1983

Bracelet Jewelry Display T-Bar (Short)

This a T-bar style jewelry display for bracelets. It can be used at home or to display bracelets that are for sale. The bar is one inch in diameter, eight inches wide and is four inches above the base. The base is six inches by two and a…

Pobrania
698
Polubienia
165
Ocena
5
P
PrintablesSnigel

Mars 5 & 5 Ultra drip bracket with extra brace

I felt the design of the origional model relied a little too much on layer adhesion strenght, so I added a brace to connect the two mounting points. This should decreace the sheer forces between layers by redistributing this force as as a…

Pobrania
680
Polubienia
36
Ocena
4,8