Liczymy pasujące modele…
A desk mount for the VPC WarBRD Base from Virpil. This mount turns the joystick base 90° from its normal mounting position, so the base isn't protruding from the desk so much. You should be able to mount it on a desk with a thickness from…
Wydruk około 1,23 €–1,50 € nettoWstępna wycena jednego wariantu
I created this collapsible Base so that i can first get out of my simrig and second that the Virpil Sticks are not in my eyesight when i play racing games. Apart from the print you will need 4x M6x20mm Screws 4x M6 Brass Inserts 4x…
Wydruk około 8,39 €–10,25 € nettoWstępna wycena jednego wariantu
ERCF EasyBrd/CAN Brd mount for TR. Add notch for CAN board XT30 connector. It is designed to be mounted under the LANE side
Simple remix of the existing ERCF Easy Brd mount to work with both the Easy Brd and Fysetc Rabbit Burrow Board
This model will allow you to mount your EasyBrd underneath the body of your ERCF. This retains the original mounting hole pattern. When the ERCF isn't mounted, the heat sinks will stick up past the feet. Be careful not to knock these off.…
The top lid will also fit the original designed base, so could just be added. Note that two versions of the lid exist - one with additional holes to fit the Easy Brd heatsinks.
Mount your Virpil Throttle and Stick to linear rails so you can slide them along your desk. This allows you to move your HOTAS aside when you use the computer for other work. When flying your aircraft or spaceship, a spring-loaded locking…
LEGO BRDM This is a model compatible with the LEGO system. Just print it, attach a LEGO chassis, and you're ready to play. Very easy, very simple.
just another tablet stand tested on mi pad 5 and galaxy s21 with bumper I printed it without supports
Removed the holes for the microfit connectors and added the EasyBRD text as for the original version which had both.
I made this bracket for mounting a Mellow Fly-ERCF-Easy-BRD to a Sturdy Bunny mod ERCF in a more aesthetic manner. I put a screaming gorilla on it because something needs to keep all those rabbits in check. Plus…gorilla. Print the…
No special parameters needed for printing. Should be easy to print, just like the original.
Please see original model. There you can find the print instructions, and a list of the screws/nuts needed. Since this is the WarBRD-D, there is no baseplate in the printfiles.
Press Like for encouragement. Comment for improvement. With the DCS module Mi-24 being released, I wanted the matching joystick. I added the missing safety cover to the WarBRD joystick Known Issues and Planned Solutions: Best used in…
Printed with 25% infill, 6 perimeters, 1mm top/bottom layer.
Brdská vločka Dlouho se nevědělo, kdo je jejím autorem, ale měl by to být spisovatel a výtvarník Jan Čáka. Má podobu směrové růžice, kdy světové strany ukazují smrkové větvičky. Diagonálně jsou pak větvičky listnaté, protože listnatých…
Press Like for encouragement. Comment for improvement. Specific cam for a Virpil WarBRD joystick that keeps the grip position when released instead of returning to its centre position. Youtube video of the 2nd version. Print: I uploaded…
I needed a way to mount a Virpil WarBRD base to my Obutto R3volution which has stick mounts for Thrustmaster Warthog. So I whipped this adapter plate up. You will need some hardware, Three M4x0.7 Hex Head bolts and nuts to attach the…
Press Like for encouragement. Comment for improvement. Specific cam for a Virpil WarBRD joystick that keeps the grip position when released instead of returning to its centre position. Youtube video of the 2nd version. Assembly: Remove…
A sock-like X and Y axis damper for the VPC WarBRD base. When you reach the end of the axis you won't hit metal with metal. The parts are really thin (0.5mm), so they don't limit the deflection angle much. I printed them in TPU filament…
This is a remix of the Virpil Controls VPC base adapter for 8020 profiles by sorcererlc (https://www.thingiverse.com/thing:4863358). This will work with the Vipril WarBRD base and has been revised to close the gap in the middle of the…
For use with : Virpil WarBrd-D Base Replacement of the metal base & can be modified to fit your needs ! Feel free to remix & Share Enjoy !
Allows you to use the EasyBRD in the ERCT electronics box, which is currently only available for the Biqu MMB
Old car toy with new design. Whithout crew, but may be later... Wheels axis - 2mm Category: Toy & Game Accessories
you need 3x voron spec heatinserts and 2x m3x8 + tnuts the rest you can see on the pictures. first screw down the holder to the extrusions then the brd to the holder. the hole spacing is 74.2mm
Press Like for encouragement. Comment for improvement. This system add detent marks to the Virpil WarBRD base. I designed them to get a tactile feedback when the stick wanders outside of the normal flight envelope of the aircraft.…
Press Like for encouragement. Comment for improvement. I designed this cams so the forces on the grip feel like the stick of a real propeller aircraft of the end of WW1 to the beginning of WW2 area. Return force is soft and constant from…
I've been searching for a good, compact personal marker light to be seen by traffic or hunters when hiking in the dark and the BRDRC drone strobe off Aliexpress has proven itself to be very suitable for that task. This case allows for its…
Virpil Warbrd Stick Axis Scaler to adjust the throw of X and Y axis. For players that like higher saturations this mod adds the option to insert different physical edge saturation plates that the joystick can be calibrated against. Other…
Pravý a levý závěs pro virpil WarBRD. Držák je navržen tak, aby USB kabely vedly rovnou pod desku stolu. Nastavení tisku - PLA bez podpor 5 vnějších perimetrů , 5 vrstev spodní a horní plochy. Vejde se i na prusa mini+ ale bez 3DLaku ani…
For optimal print use the same settings as original. Happy Fox3-ing :)
I got fed up with my old X52 and decided to spring for a set of VPC sticks, but couldn't find any good mounting solutions for them. This mount is designed for a 45x45 aluminium slot profile and will pretty much not allow any unintended…
This is a mount for the EasyBrd/Burrow to be used with my ERCF Ceiling Mount BOM 4x M2 heat-set inserts 3x M3 heat-set inserts 4x M2x12 screws 3x M3x6-8 screws Instructions Install 3 M3 inserts into the board mount. Install 4 M4 inserts…
i maked a blueprint just for make the model i hope if you enjoy disclaimer the toy has some parts also can hurt no recommended for0-3 years old kids
Just some BRD-Tags. Eagle: with keyring hole Eagle: neutral Eagle: molle Molle-Flag Molle-Eagle
Remix of the mount that allows for use of 5mm bolts for the EZBRD / Easy Board / Easy BRD / EZ BoardRemix of the mount that allows for use of 5mm bolts for the EZBRD / Easy Board / Easy BRD / EZ Board
Mount for the Enraged Rabbit Cotton Tail (ERCT) for the EasyBrd
The pipe joining team bought me a broken tool and asked if I could reverse engineer a replacement handle. Working on a remote mine site we quite often need to repair tools and replace plastic parts that would otherwise take weeks to source.
I liked the look of the fixed ez brd mount for the tradrack by The Printing Shark, but didn't have enough space to mount it to the front. The clippable mount that screws into the bottom of the extrusion had a different design, so I merged…
After ordering a new Virpil WarBRD joystick and proper mount, I needed an adapter for my Thrustmaster T16000M joystick until the new joystick arrives. I took a mounting plate design by mayoms and added a possibility to mount the T16000M…
This is a case for the CNC controller board from bdring: https://github.com/bdring/4_Axis_SPI_CNC Also has space to mount a PWM 0-10V output module for spindle control.
This is a cable chain mount for the X carriage of Creality CR6 SE/MAX that fits on top of BRDD LGX Lite mount: https://www.thingiverse.com/thing:5274916 (It fits on top of the wide cable holder) The chain that it's used with is this one:…
Quick Release https://www.aliexpress.us/item/3256806823650864.html GX12-4L https://www.aliexpress.us/item/3256802442302567.html Bolts/nuts to suit your rig plus M3 6mm round head for the connector plates Epoxy glue It's been a while since…
The model comes in 3 parts, the base plate, and the two mounting brackets for the diwangus arm. The plate replaces the bottom plate of the warbrd-d base. The brackets replace the existing mount bracket for the diwangus, this enables the…
Enlarged the mount to add space for a LM2596S Buck Converter
Detachable USB-C Mod without cutting or drilling into the body of the Virpil WarBRD (non D) !!MODIFICATION AT YOUR OWN RISK!! Print does need support Assemly: Put the USB-C inside the printed body with the leads sticking out of the hole…
muuxBRD Quick Lever Pro 18 slat case with snap cover. These are great to print in different colors and with names/logos to identify your equipment after the show. Slats can be mounted using any M5x6mm machine screw: https://a.co/d/elhXcOY…
Omnibox Lower Bay Mount for a ERCF Easy BRD. Remix based on: https://www.printables.com/model/422526-omnibox-lower-bay-s
A base mount for Virpil WarBRD/CM model bases. This is a remix of the mount that I found on MakersWorld https://makerworld.com/en/models/475312-virpil-warbrd-d-rig-base-plate?from=search#profileId-386063 . The key complaint from a lot of…
I used this as reference https://support.virpil.com/en/support/solutions/articles/47001275913-cdt-aeromax-r-flightstick
This is a case for the CNC controller board from bdring: https://github.com/bdring/4_Axis_SPI_CNC Also has space to mount a PWM 0-10V output module for spindle control.
Enlarged the mount to add space for a LM2596S Buck Converter
This is designed to bottom mount your Virpil WarBRD base to a piece of 4080 (40mm x 80mm) aluminum extrusion using 4 M8x16mm bolts. I have been using these mounts for a few years now printed in PLA and have had so signs of weakness. but…
The model comes in 3 parts, the base plate, and the two mounting brackets for the diwangus arm. The plate replaces the bottom plate of the warbrd-d base. The brackets replace the existing mount bracket for the diwangus, this enables the…
This is designed to bottom mount your Virpil WarBRD base to a piece of 4080 (40mm x 80mm) aluminum extrusion using 4 M8x16mm bolts. I have been using these mounts for a few years now printed in PLA and have had so signs of weakness. but…
