Tormach BT30 tool tag
Tool tag for BT30 tool holders for easy identification. Print Settings Printer: Prusa Resolution: 0.250 Infill: 25% Category: Tools
- Pobrania
- 290
- Polubienia
- 21
- Ocena
- 0
Liczymy pasujące modele…
Tool tag for BT30 tool holders for easy identification. Print Settings Printer: Prusa Resolution: 0.250 Infill: 25% Category: Tools
We use this to wall mount tooling for our ZX45 mill at Stockholm Makerspace . You can use this for any kind of 30-taper tooling, and the bottom is open to accommodate different styles of pull studs if that is something you do have on your…
This is a printable zero clearance throat plate for the Ryobi BT3000 Table Saw. This is version 3 of the throat plate and should work as printed for most cases. I am working on a v4 that will have a joint for providing a more robust…
Simple BT30 Tool holder storage. Print one and store your dial indicator in it or slice 10 of them together to make a "job pack." Included is another holder the same footprint to hold additional tools (inside their plastic cases) for…
Original Fusion files included Printed on a Prusa mini in Polymaker PLA This work was based on other opensource work, and may inherit their license. Micrometer: https://amzn.to/3WaB8pG My other Gridfinity Designs: 1/8" Endmill Holder:…
BT30 tool tag holder. Print Settings Printer: Prusa Supports: Doesn't Matter Resolution: 0.250 Infill: 25% Notes: Use 1/8" x 1/2" magnets for the back of the holder Category: Tools
This tool caddie is quite large, I printed it on a K1 Max which has a 300 x 300 mm build plate and had to turn it 45 degrees. You can print it as one piece or print the legs separately.
Since the thermal design of the amp is exceptionally poor because the heat generating components aren't directly connected to the housing and do not allow the amp to be cooled properly I designed this housing which is designed for the amp…
This design tips holders up so the taper is horizontal. For tools ~60mm gauge length they sit perfectly but drill chucks or longer gauge tools may have too much weight forward of the taper to sit well. Made with a 3x4 Gridfinity pattern…
This holds 4 BT30 tool holders in a 2x5 sized gridfinity base. The main holder is by Jonny Wood (049machine on Instagram), and with his permission I mated it to a gridfinity base. Note that in the pictures, I haven't made the bases for…
I have some Audio Engine A2+ speakers and they're excellent but about a year ago the capacitors or something on the internal DAC started going bad and the right passive speaker was getting quieter and quieter. I was having to…
A simple tool tag with source files for editing
Blank router table insert for the Ryobi BT3000. Can be used to block off the opening or modified / cut for router use. You may need to scale just a bit for the desired fit.
This is a replacement part for the clamp on the sliding miter t able for the Ryobi BT 3100 table saw. I bough one second hand and the miter clamp had the tabs that hold the aluminum extrusion fail. The replacement part has the tabs run…
Honestly, I haven't even sawn thru my original end blocks yet. I just read about folks who were looking for replacements, so I wanted to try drawing these up. Then I found that someone on Thingiverse had already done it. Oh well - I think…
Bt30 tool tags and tag holders for the tools in the machine
Fits 14 BT30 pullstuds in a 1x3 Gridfinity pattern
Printed in PETG, 0.6nozzle, 0.32 layer height.
I bought a Huot ToolScoot 40 Taper, but use BT30 Tool Holders. Sleeve fits into the ToolScoot to snug up with BT30 Tool Holders. Model should be compatible with any Tool Holder trays that are for BT40 Tool Holders.
A Bt30 rack that is designed to be laser cut and bent from steel and then has 3d printed inserts. Inserts are designed to print without support in Pla or Petg 0.2-0.4 lather height The holes on the steel parts are spaced to suit 2040 alu…
Din-Rail mountable holder for BT30/SK30 tools.
This thing allows one to mount their 690 Porter Cable Router to a Ryobi BT3100 (Sears Version). I made it solid in PET-G to accommodate the 5kgs weight of the router, and it needs to be safe. There are 4 x 1/4-20 nuts embedded in the…
Replacement end caps for the Ryobi BT3000 table saw. This should not require supports if printed on the 45 face as shown / downloaded. Note that the left and right caps are mirrors of each other so if you only need one, make sure you…
Printed in PLA 0.2mm Layer hight 25% Infill Mount with a M6x25 Screw
I take the Mavic on long hikes and needed better protection from the elements so I made these cases for the Mavic Pro controller alone or with the controller for the Epson BT-300 glasses attached with this adapter:…
This wheel can get its center slot-hole stripped if you try to turn it too hard as it is the only non-metal piece involved in the blade raise/lower mechanism. Lubricate your bevel gears! It's a tight fit and I had to file both the crank…
I designed this for the aftermarket audio unit that I installed in my 2003 Toyota MR2 Spyder. The dimensions are very specific to my need so I'm not sure how useful it will be to anybody else, but, I'm going to upload it anyway. Maybe…
Designed to help me keep track of which tools I have in the machines at the Toolpath shop. You can use just the tag if you like, or the tag with rubber bands. I made a TPU strap to be a little more coolant resistant. I suggest printing in…
This clip fits under the sliding miter table. it is the clip that fits closest to the table rides on top of the aluminum rail. I printed in PLA and it slides fine but Nylon may be a better choice for longevity. Category: Machine Tools
Bt30 Probe mount for inside the machine, Uses 95lb Pull weight screw hole magnets from amazon https://www.amazon.com/gp/product/B072K586ZW/ref=ppx_yo_dt_b_asin_image_o05_s00?ie=UTF8&psc=1 Print Settings Printer Brand: Monoprice Printer:…
The Epson Moverio BT-300 controller will securely snap into these cradles. Two iterations, the longer version protects the cable attachment in the back of the Epson controller. I suspect this may be a point of cable breaks if you use a…
BackPack pour KayouMini BT3 Un mini backpack pour inclure proprement une mini antenne et un mini connecteur BT3 pour votre mini Kayou. Vient se prendre sur les mini entretoises arrières qui stabilisent le TPU. Mini protection pour la mini…
Remix of the3droom’s under-counter mount for the Fosi BT30D amplifier, adapted for compatibility with cyb’s Fosi Audio BT30D Pro open housing mod . Features a honeycomb ventilation structure aligned with the enclosure to preserve…
Very basic stand specifically designed for pairing a Topping D10s DAC with a Fosi BT30D Class D mini-amp. 140mm X 150mm. Top could be glued to the base if you wish, but sits fine when left loose. Print Settings Printer Brand: Creality…
I made this shade to allow better view of the projected image in bright sunlight and as a protection for the glasses. Insert the glasses from the back. I printed this top down or standing on the back which needs much more support. Printed…
I'd recommend printing with supports so the slot for the catch doesn't get malformed. Really up to you the other settings but I did this on 4 wall perimeters at 20% infill. Fit and clicked into place just fine.
A tool rack for 6 frequently used BT30 milling tools
I used my soldering iron to secure the two halves together, and to secure the battery plugs to the case. I also used e6000 to secure the LED panel in the front… never used a screw, but its there if you want to, m2. Keep wires short. I…
This is a BT30 style holder for the Tormach TTS Probe. It mounts directly to the side of the control cabinet and utilizes the existing screws.
Printed in PLA at 35% infill. I used tree supports for the overhangs, but not sure they are necessary.
Simple wall mount for the BT360 Battery tester Should suit other models of similar size, internal measurements are 79x28mm, cable cut-out is 24mm wide
Holder for BT30 tools that I use with Menards slatwall (3" spaced slats). I printed the main body (blue) upside down and the hanger piece (black) on it's side. I then just superglued them together. Oring (green, McMaster 9452K208)…
a tool for quickly getting a rough gauge length of a tool before using auto tool length measurement. I marked the scale with a fiber laser but there are many other options if you have a mill you could engrave the profile or print a paper…
BetaFPV RA BT 3.0 connector mount for Kayoumini. Prints with supports. Tight fit all around.
BT3 Plug and antenna holder on 2m stand off.
Made this to mount my indicator inside of my Tormach CNC Mill. I didn't like messing around with unplugging it and taking it out all the time, so I just kept it in there. It needs to be taped to the wall. I used 3M VHB tape and it works…
Hi this is the GuyLK4. This model I made because my father just got Tormach machines and asked me to make tool numbers. So I made this with Fusion 360. Enjoy. #1-4
The original clip that secures the plate holder (foldable tine row) in the lower basket of my Haier DW10-198BT3RU dishwasher broke, so I designed this printable replacement. It has been in daily use for dozens of standard wash cycles with…
An extended version of the original tool holder from bortech88.
Made this to mount my indicator inside of my Tormach CNC Mill. I didn't like messing around with unplugging it and taking it out all the time, so I just kept it in there. It needs to be taped to the wall. I used 3M VHB tape and it works…
BetaFPV RA BT 3.0 connector mount for Kayoumini. Prints with supports. Tight fit all around.