BUCKLE - To Wear Your Water Bottle (PRINT IN PLACE BUCKLE)
Easy and quick to print !! Print in Place
- Pobrania
- 1250
- Polubienia
- 659
- Ocena
- 4,89
1043 modeli
Easy and quick to print !! Print in Place
Overview The GoPro quick release buckle has been an important component of the GoPro mount system since time immemorial. Somewhere around the release of the GoPro Hero 5, GoPro introduced a new version of the quick release buckle that had…
Suggested print settings: Layer height 0.2mm. Infill 50%. Perimeters: 5 (for strength). No supports needed. More durable when printed using PETG. Assembly The components fit together using a friction-fit mechanism. Push the "Lock" piece…
I designed this belt buckle to turn a broken laptop bag strap into a pants belt. Remove the parts in red on the picture.
I hate any bulk to my keys. So, I only carry around the keys that I need. This buckle acts as a quick disconnect for some of your keys. Maybe for 1 key or for a whole set. Colour code them even! These are both smaller and lighter than the…
So I wanted to try designing a hook on type buckle that can be used with some straps for easy release. Could be used with Virtual Reality trackers like SlimeVR if your strap fabric fits fine. Quick release waist band? If you find a use…
Version 2: Files with -v2 contain a slightly modified buckle with more space for the strap, which should work better when scaled down.
Replacement male side-release buckle for Quechua/Decathlon backpacks with a 40mm belt. This specific buckle was found on a “Quechua Bionassay 22” backpack, but will likely fit several other backpacks using the same design. The code on the…
Male part of a Deuter Backpacks belt / strap buckle. Fits 3cm wide straps, e.g. the waist strap on a Futura 22 backpack. The pictures show how the strap should be routed through the printed part. Prints in 41 minutes at 0.15mm layer…
I created a Paracord Magnetic Buckle V2 (10x5x1,5mm magnets) for everyone, who love making paracord bracelets, etc. :-) This model I created entirely by myself and i did 2 verisions. First version is “Paracord Magnetic Buckle V2 Vertical…
Webbing Adjuster for securing straps and a g-hook to connect to additional webbing. It is used as adjusters on backpacks straps, rucksack, luggage, harnesses, leashes, collars etc. Printing Suggestions: organic supports (it is slightly…
Replacement part for Meta Quest 2. Print in any filament you got (preferably PETG) with 100% infill.
Use Standard 3D printing slicer to Build this piece. Other Creations : https://www.instagram.com/leclubsandwich_studio/
Print Settings: -PLA +/PETG -80% Infill -Mostly <1.5 grams per item I used Ender 3 V2 to print this item. Thank you
This model replaces the female buckle piece on my Northface backpack. It may be compatible with other brands that utilize a 15mm strap as well. It is printable without supports when printed vertically on its “legs” (the STL should be in…
I created a Paracord Magnetic Buckle (3x1mm magnets) for everyone, who love making paracord bracelets, etc. :-) This model I created entirely by myself. Whole Paracord Magnetic Buckle have dimensions cca 35 mm x 17,5 mm x 5mm in folded…
I use ¾" strapping for handle projects. The buckle lets you loop the strap thru an eye and then back securing it. Here are the things I used for this project: * 3/4inch strap / Heavyweight Polypropylene Webbing ( https://amzn.to/39Lom93 )…
Buckle for 36mm/1.4inch width belt. Print Settings Printer Brand Prusa Printer MINIIS Resolution .15 mm Infill 100% Filament Prusament PLA Recycled Build Plate Textured steel sheet Added paint-on fuzzy skin to imitate the feeling of the…
This is a buckle anchor for an Artesian spa style cover buckle. Ours broke off with an overly enthusiastic child taking the cover off. I printed in PETG for durability to handle the temperature swings of the seasons.
Print a new belt buckle for your GRIP6 belt strap. Being plastic, it can travel with you and go through metal detectors. Printing the belt buckle with its iconic curve would require support and show horrible layer lines. Instead, I…
This buckle is for elastics. It is used to tigthen a cpap hose to a elastic For universial use I included severel versions. The example is the 12mm version. The naming is according to the width of the used strap. The printing settings are…
If you will need mount something on your backpack.
Holder for Grip6 standard men buckles (1.5” straps). I tested the holder with the classic aluminum buckles (3 mm thick) and with the carbon fiber buckles (4 mm thick). I suggest printing upside down (with the openings facing down on the…
These are various devices I have come up with to help the grandkids (&/or parents) un-do the release buckle on car seats. All work but every kid seems to have their own preference.
This eyelet buckle is for elastics. It is used to tigthen a cpap hose to a hook on the ceiling. For universial use I included severel versions. The example is the 12mm version. The naming is according to the width of the used strap. The…
The Buckle of the chest strap on my Everki backpack broke. This should work as a replacement. It's a first “design to fit” design, I would like to create a 2nd version where I do not have to reattach the belt. Printed laying on the bed…
I modeled a Big Magnetic Buckle Universal (10x5 mm round magnets) for everyone, who need buckle for universal purposes :-) This model I created entirely by myself. Whole Big Magnetic Buckle Universal have dimensions 88 mm x 50 mm x 16 mm…
Probably more suitable for a metal printer, but let us start with a PLA prototype. Designed from scratch with tinkercad.com
Momi Ofra Black - Buckle Replacement part. The buckle from my baby's stroller was broken and to find and order a replacement would take some days. Without it the stroller would be to no use and i had to keep the baby without daily walks.…
I made a satchel out of Monk's Cloth and wanted adjustability in the strap length. I was just tying them in a knot, but decided to try my hand at modelling and make myself a buckle. This was made in TinkerCAD with no prior knowledge, so…
Replacement buckle (male part only) for chest strap on Patagonia Black Hole 32l backpack The original male part broke, while the female part held on and strap was sawn in. So I decided to exactly replicate the male part instead. In the…
A few months ago the buckle of my Burton Dayback 2.0 broke down. So I decided to quickly model a replacement part and print it out! With this model, you can customize your Burton Backpacks to match your personal favor and try out every…
A replacement buckle for Ledlenser MH7 LED flashlight. Should work with any other similar strap. Tried to model it as close to the original as possible, there are some deviations, feel free to modify it. Printing Instructions Use PETG,…
Made this remix so I could attach a admin pouch to my harness. The mechanism of the clip is untouched from the original. I used the clip for 17mm straps. Fits straps that are 25mm in width. In my case (shown in the images) I attach a…
spare part new stronger version uploaded in addition.. . adopt if you like - FreeCAD file attached…
The goal was to create a buckle design that is durable and of course adapted to 3d printing. It often happens that the buckle (e.g. on a backpack) breaks when you step on it. I believe that these 3d printed buckles will last, since they…
This printable side-release snap buckle has been designed so that both sides print flat on the print bed, which allows the layer lines to be optimally oriented to create an impressively strong functional buckle. Carefully designed so that…
A buckle designed for easy replacement of a broken one without the need to unstitch your bag. Simple to print and assemble. Recommended materials: ASA or PETG. Supports are required – organic supports were used. Fits: 20mm strap 25mm…
AirTags are a great way to keep track of your valuables, especially while traveling. An AirTag thrown in your suitcase, or hanging from the handle of your bag will provide some peace of mind, and make it easy to recover misplaced luggage,…
A strap buckle, also included Step files for those wanting to tweak it :)
This is an S-shaped dual clip designed to organize and hold two tubes in parallel. in this case, the extruder cable and the filament tube for the FlashForge AD5X 3D printer. Shape: The S-shape forms two opposing curved channels, each…
Outside dimensions of the model: The holes are 6mm x 11mm This is version 5 of a plastic replacement buckle that I designed with the FDM 3d printing process in mind: No support is needed Prints in only 30 minutes Optimized print…
This is my remix of Jesses side release buckle over on Thingiverse: https://www.thingiverse.com/thing:312961 The male part now fits either way, also it is scaled down quite a bit from the original and the edges are rounded a little for a…
My version of a simple buckle, the clasp goes on a little hard but that's the intention for a tighter fit. Can be printed in both ABS and PLA.
Quick Release Buckle Clip (backpack & belt Clip)
A simple buckle is a versatile fastening accessory used to securely connect straps, belts, or bands. It is lightweight, durable, and easy to use, making it ideal for bags, backpacks , clothing , and various DIY projects. Perfect for quick…
This .scad can generate a back-of-the-head face mask holder of any length, width, with any number of "teeth" of any size (at any angle!). It even lets you customize it with a corporate logo, custom emoji, or whatever text you like. It can…
bunckle sam (sorry for using the original pic wanted it to be recognizable as pretty much the same thing)
There are two models, one with teeth and one without. I recommend the model with teeth. This will prevent slippage of the straps. Update 28SEP2018: I uploaded a strap keeper to hold the straps together. Although it looks very similar to…
Alarm Stopper Null insert Seat Belt Buckle Clip For all cars (Universal)
A snap buckle is a type of fastener. It can be easily opened and closed.
Print Tips print the male part flat on bed to get better strength print the female part vertical (standing) to avoid support inside put organic support for female part
A compact, easy-to-print snap buckle for straps in 20 and 26 mm widths The parts have been arranged so that they are on the right side for printing. For assembly, one part must be rotated so that it fits together.
Model Seat belt buckles have a pretty satisfying mechanism, but it’s not a great idea to play with them on the road! Now you can 3D print your own fidget and desk toy to play with anytime that you want. The design features a double action…
Protect ears from constant pressure from face mask, makes them more comfortable and secure to wear. Reduced printing time - 12min/piece. Tested in hospital. Print instructions PETG. It has 1mm height, so use 0.15/layer
This is version 2 of my Plastic Buckle, designed specifically for FDM 3D printing. This updated model brings major improvements, including: 2x pull force: Built to handle twice the pulling strength. Increased strength: Redesigned for…
After breaking and losing a bag strap buckle and searching for a 3d design to print and replace it, I realised that a fully parametric replacement strap buckle clip thing would be really handy, so I could … retro fit it to fix the one I…
!!! Quick Side-Release Strap Buckle !!! 2:30 Print time (Can surely be optimized) Max. strap width 27mm I recommend printing in PETG It sure does what a Strap Buckle do. Feel free to do anything with my precious Quick Side-Release Strap…
Ever since stumbling upon buckle designs made specifically for 3D printing I kinda got stuck on the idea of developing my own. So this is my first official attempt ;) All parts are designed to be printed without supports. You can mix any…
It's replacement for injection molded buckle I had. Works best printed in PETG. Make small cut in marked corner to sharpen it. It'll hold better. Print Settings Layer height: 0.12mm Supports: Yes Support top distance: 0.20mm Support…
Use case This buckle for a one-inch strap can be used anywhere where you would otherwise use the common strap buckles with the two hocks, that are released by pressing in from both sides. From a functional point of view, my design…
I came across the double D-ring buckle on my new motorcycle helmet. Soon after I learned on the internet that this kind of buckle was used in ancient times already. Even more importantly, until today it is one of the toughest buckle…
We created this little duffle bag buckle for individual use. Holds very stable and tight. Watch the video! https://www.youtube.com/shorts/DLxIzBYfSyA You can print it, scale it, whatever… The standard size is designed for 25mm wide straps…
Designed this to help my kids to unbuckle themselves and it's also a great aid anyone unable to depress the seat buckle release. Print Settings Nozzle Size: .4 or .6 Layer Height: .2 (.4 nozzle) or .4 (.6 nozzle) Infill: 20% Material:…
NOTE: This is an add-on to the pre-existing "QUICK-CLIP : Base Starter Kit" Post-Processing Difficulty: Easy (Ready to Use from Printer) Tools Needed: None Introduction & Instructions: QUICK-CLIP is a versatile mounting system that I…
Go ahead and divide 39 mm by your desired size and use that number as the size modifier to get a buckle of your desired size. Make sure to print with the flat side down and the tab facing up.
Found this print a long while ago on thingiverse. However, the file is gone and had to search my drive again… Wanted to grant you the opportunity to use it as well. Please be aware, that I personally use this device only, when I am having…
Frustrated with the seat belt buckle pushing down into the seat when you're trying to buckle? Look no further, the solution is here! My five year old daughter would scream in frustration when trying to buckle up in the car. Now with this…
Belt buckle in the roller coaster style, fitted for a 1.5in~37.5mm wide belt. It's fully 3D printable so you can scale it to other sizes, but I don't recommend going smaller considering there are small parts that aren't a walk in the park…
Application The double D-ring buckle for strap webbing is not the fastest to close, or the easiest to open. But it is the strongest there is to my knowledge (see video at the bottom of this page). If you need a quicker or more convenient…
Hang your belts with Cobra buckles.
To bypass the safety alarm in cars BUT Whatever the reason for using it, I would ALWAYS recommend riding with a seat belt .. Take care of yourself, If not for your own sake, then for the sake of your loved ones…
Seat Belt Buckle Dacia Duster, Volkswagen Touran, Citroen C4 Picasso (II. Gen) and others Note: Not intended for use while driving with a passenger. -If you decide to use this adapter for tying small animals, it should be more suitable…
Buckle Latch for doors and boxes consists of 3 3D-printed parts, and can be screwed in place. It is an overconstrained mechanism using an overcenter-linkage, Teaching Tech made an excellent video about the concept of this mechanism. I…
This buckle can be used with 25mm (roughly 1.in) strap in order to make it a sturdy tie down fastener. Makes it easy to attach stuff to your backpack, like sleeping bags, mats and jackets. Also great for straping your bag together in…
TPU Belt with rigid buckle TPU is my favourite material. It can be sometimes a pain to print, but it has some great qualities and it is well worth the trouble. Its flexible but not stretchy just like leather so thought i would try…
For my 100th publication at Pursaprinters.org, I have chosen to upload this magnetic strap buckle for one-inch straps. I find it very easy to print and very useful for everyday usage. It can be used on backpacks, to tie down garden…
Introducing my latest creation: A 3D-printed Velcro strap buckle. Key features: You can remix & improve the model freely! All the files are orientated for convenient printing in STEP, STL & 3DM formats! No supports are required! Easy &…
This is a classical strap buckle as can be found on backpacks and other kind of low-load applications. The commercial, injection molded buckles of this kind are cheap to buy online. But hey, why buy if you can print in your favorite…
A sturdy buckle replacement for 26mm straps. I printed it in PLA with 6 walls (so it's basically a solid piece)
Belt buckle with glue on clips to attach to any generic belt. Best printed flat on build plate with ironing enabled Clips attached with superglue Main buckle can be heated gently and pressed around bottle or curved object to give a better…
A tight side-release buckle for 25 mm straps. Final dimensions (width x length x thickness): 31 x 67 x 9 mm Do NOT use in places or situations where life depends on the device! It was not load tested. Print Settings Printer Brand: Prusa…
I had some issues with the available GoPro buckles so I made my own. Easy to print and use. Edit: Be careful with 3D printed mounts, they are not as robust as the real gopro ones Edit2: Forget that, I got a new real Gopro buckle and it…
Printed in PLA and PETG-CF. But Preferrably in a material which: Does not creep over time (PLA does creep) Has good layer adhesion However the springs are only tensioned while inserting, so even when printed in PLA creep should not be a…
Printed from PET-G with 3perimeters and 40% gyroid fill works fine. The “outside” part contains integrated support (blue part in model image). Remove the support when printed. Check how the part (especially bridge at 10.7 mm layer) is…
Want your young kids to be more self-sufficient and get out of the car on their own? This allows for them to be able to unbuckle the lower buckle of a car seat on their own. Ideally only given to kids who are mature enough to not unbuckle…
[Update Nov.23, 2021 : I came up with a variation on the original design; this second version works betters on some seatbelts. See the additional files with “06” in the name.] You can mail order one of these for $1 and wait a week or…
12. Feb. 2024 V1.0: First release Based on DUMMY 13: DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 Get your Dummy 13 here: /model/593185 Content: Belt Different buckles Pocket Ammo Get more:…
NOTE: This is an add-on to the pre-existing "QUICK-CLIP : Base Starter Kit" Post-Processing Difficulty: Easy (Ready to Use from Printer) Tools Needed: None Introduction & Instructions: QUICK-CLIP is a versatile mounting system that I…
This guide keeps your seatbelt buckle securely in place, making it easy for children to buckle up independently.
This Face mask buckle is smaller. It can help child to use. Also you can cut the long parts.
This buckle is originally made for a replacement. The width of a strap should be around 16mm or less. I assume you could just scale it up if you have a wider strap. You can print this with no supports (and if you print with them, I'd…
This is a support for the facemask with ear band. Wear this kind of mask in Hospitals all DAY, which will lead to lesions and wounds on the ears. With this, the tension is given to the support, on the back of the neck. Questa banda serve…
Seat Belt Buckle Dacia Sandero Nyní dostupný jako příslušenství k tomuto modelu https://www.printables.com/model/1855441-key-ring-for-belt-silencer-or-shopping-cart-coin – klíčenka. Užitečné, pokud přecházíte mezi několika auty a…
Needed a replacement for a buckle that was broken. Works well with 23x1.3mm straps.
Use PETG or possibly ABS/ASA (PLA does not flex well enough). Designed to be printed without support. Note that one of the pieces should be reversed when connecting them.
A remix on my AirTag Buckle design. I added gaps to the buckle to make it compatible with a wider variety of straps.
Simple 3d printed buckle with no nosupport and flat underside.
My remix: http://www.thingiverse.com/thing:1614456 I removed the extra slots for a flat belt and added a slot for the paracord. Both parts are printed laying down. Print the female part with internal supports. PLA extruder 210C bed 60C…
This is a buckle mechanism I designed for any type of use You could attach it to your backpack or luggage bag. Wherever you need! It may require a bit of supports depending on your printer.