390 modeli
Intro Earbuds Cleaning Tool V2 is a small, easy-to-print earwax remover tool for in-ear headphones and earbuds . It helps you safely remove earwax, dust and debris from your earbuds without damaging the speaker mesh . The first version…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Say goodbye to dirty earbuds with the Earbuds Cleaner Tool ! This dual-sided design features a brush-like surface on one end for removing earwax and…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
A remix of the Lightning connector based version from @stripetuning_193054 to accept the new USB-C connector.
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
if for some reason the control panel doesn't line up correctly you can cut a small bit off the bottom and sand it flat. i will be editing this in the future
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
This is an improved version of my previous model https://www.printables.com/model/659917-wired-earbuds-holdercase. Has a better grip, but has the same dimensions as the previous one. Ideal to store you wired eardbuds. Printed in PLA…
Wydruk około 2,66 €–3,26 € nettoWstępna wycena jednego wariantu
احم سماعات CMF BUDS 1 الخاصة بك بهذا المكان! تصميمها المتين تحافظ على سماعات الأذن الخاصة بك آمنة من الصدمات والخدوش. لا تفوت فرصة الحصول على سماعات الأذن الخاصة بك الآمنة!
Wydruk około 1,20 €–1,47 € nettoWstępna wycena jednego wariantu
There are TWO versions of this one in the model section: Wired version, slide in and connect to a general usb c plug. I made this for a generic usb c plug, but they are different thickness so you might need to adjust the height of the USB…
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
Design: Charging station (wired – USB C plug) for in-ear buds in their pod. The containing pods for the in-ear buds are very smooth and all-rounded to be ergonomic to be comfortably stored in your pocket but they can easily slip out of…
Wydruk około 7,44 €–9,09 € nettoWstępna wycena jednego wariantu
Earphone Lion Holder for Samsung Galaxy Buds 3 I designed a 3D print model of a lion, where you can temporarily attach earbuds to its ears. There’s a storage space for the charging case at the back. The model features a low-poly design,…
Wydruk około 3,50 €–4,27 € nettoWstępna wycena jednego wariantu
Intro A super-simple 3D-printed cleaning tool designed specifically for earbuds and in-ear headphones . It removes accumulated earwax and debris quickly and safely, helping restore sound quality and hygiene — all with a very short print…
Beautiful designer organizer for cotton pads and sticks.
These designs are compact containers to bring toothpicks or cotton buds with you. I was inspired by this model: https://makerworld.com/en/models/525669?from=search#profileId-447641 But it is completely redesigned to make it significantly…
Galaxy Buds Case that snaps on. No glue or tape. It will fit Buds Pro, Buds Live, Buds2 and Buds2 pro, and Buds FE. I printed in PLA. 0.15mm QUALITY settings in Prusaslicer. Ironing for top layer only. Supports so it can be printed easily…
About I designed this cover to protect my new Buds 3 Pro case from scratches. It should also work with the normal Buds 3 since they are the same size. The cover has a snug fit and lets you access the case's functions. Print settings I…
Anti-Snoring Earbuds: a 3D printable solution for a better night's sleep. These earbuds are designed to fit comfortably and help reduce snoring, ensuring both you and your partner can enjoy undisturbed rest. Ideal for 3D printing…
Print in flexible filament. Mirror it for the other side.
A simple and fast print to help clean earbuds and phone charging ports. It features a textured side to help with grip, and the tools on each side are the perfect size for cleaning an earbud or getting dust out of a phone's charging port.…
Ready to catch 'em all? Print your very own Pokeball case for your Samsung Galaxy Buds2/Pro/Live with my 3D printable file – it's a fun and creative project for any Pokemon fan! This cleverly designed 3D printable file allows you to…
Simple lid for JBL Wave Buds Easy to remove, you can shake off the lid when it's upside down.
I added a hole for the LED indicator, i also added the wireless charging symbol on the bottom side of the case and the text with the name of the product on the top. I recomend printing with PETG because PLA isn’t as flexible, the…
Remix of existing model with rounder back portion, nicer rounder keyring loop, small lip to top half for easier opening and changed front LED hole to be circular. Print with supports in the inside ( see picture ) Also using this…
Second of my bathroom accessories series of 3D models in modern minimalistic design. I am presenting Cotton Buds dispenser / hodler. I printed it on Elegoo Neptune 3 Pro with 0.4mm nozzle in PLA+ using 0.2mm layer height, 15% cubic…
I tried to find earbud case, but finally designed my own. Print without supports. Please share you makes and consider donation. https://paypal.me/novatormaker https://revolut.me/onovator
Dispenser for cotton buds for honeycomb storage wall. Zásobník na uchošťoury pro honeycomb storage wall.
Product: Customized Ear Hooks for OnePlus Nord Buds Elevate your audio experience with our custom-designed Heat Bendable Ear Hooks for OnePlus Nord Buds. Created for comfort and a secure fit during workouts and travel, these PLA-printed…
Simple, capacious (12 x 12 x 12 cm), 4 sections organizer for cotton buds and pads. To fight the mess in your bathroom :) I also attached some optional covers. Print instructions Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No…
A case made for the CMF Buds pro 2 Very simple print, supports are only needed for the overhang near the knob on the upper lid. Category: Audio
A remix of the USB-C connector based version from @ChrisBoorman_136327.
Do you prefer wired earbuds because of their crisp mic recordings but hate the tangles? Search no more! This holder is designed to keep the earbuds and the mic in the central cavity, protecting them from impact while keeping the wire…
Printing Material: PETG for a more reliable snap latch and its better for outdoor use. Seam: exclude the seam away from the front, looks better. Assembly Its uses a filament hinge that can be pressed in and use Flush wire cutters to cut…
Update: February 27, 2026 The new Galaxy Buds 4 and 4 Pro have gone back to a clamshell-style case that's bigger than the old Buds 2 case by 1mm in every dimension (51x51x28mm). I've added a slightly larger version, but it's untested…
A custom case designed for CMF buds Pro 2, with features: A lanyard hole A belt clip - but not for belt Physical protection I took advantage of the texture of the plate and printed top and bottom faces towards plate. I will suggest you to…
Allows for Pixel Bud Pro's Earbuds to stand on end.
Decorative holder for cotton pads (60mm diameter) and buds. Inspired by ancient roman columns, with a 'broken' top for the ruined look.
I recently went to treat myself a little bit and spent a little extra money for a new set of bluetooth earbuds. These WF-1000XM4 earbuds are amazing… and have the price tag to match (for a relatively broke university student, at least…
I scaled the original woven planter file up to 120% (100mm tall) , but even if you don't this should still work. The cactus will just be larger in proportion and not sit as deep in the planter. The base piece can be printed in the…
Once I saw a similar thing on this site, but when it was needed I could not find it. Made my own version of the organizer for cotton pads and swabs. Added a lid that completely covers the cotton swabs Print Settings Printer: FlyingBear…
Part can be printed vertically for best look and without supports. For best strength it should be printed horizontally.
This is a button cover for the Sony WF-C500 earbuds. The cover fits over the existing button and prevents accidental presses, while still allowing it to be pressed with your finger. I used small strips of 3M double face clear tape to hold…
I liked the original model by Neybao, but the power port on my buds case was quite a bit lower (almost 5 mm!) than the port on the original model. So, I had to widen that a little to make room for what I gues is a factory change in the…
Simple holder for the Samsung Galaxy Buds Pro charging case. It is a 2x1 Gridfinity case. This case is designed to be printed without supports. Printer brand: Creality Printer: Ender 3 V2 (heavily modified) Rafts: No Supports: No…
3D Printed Case For Samsung Galaxy Buds Live this is Ver. 5 and it doesn't affect the Wireless charging i Hope you like it thanks
Simple case for the new Samsung Buds4 Pro. I used double sided tape (20x20x0,8mm) to stick it on the top and bottom part.Uploaded the v2 with a tighter fit in the back. There are 2 versions with 2 options: Regular version with 2mm wall -…
The holder is designed to fit the Pixel Buds Pro case, the Pixel Buds 2 case also fits but since it's slightly smaller there is more room for it to move. The holder has a cut out in the bottom which allows a USB-C cable to charge the…
It is a small container where you can put earbuds or other little things. The inner diameter is 26 mm, and the height is 90 mm.
Context Maybe my ears have an unusual shape, maybe I'm asking too much: I was unable to run without having to reposition my earbuds every 5 minutes. Since tapping/pressing the earbud is sending a pause command, it was annoying. I decided…
This holder fits the Pixel Buds Pro and can be used to wireless charge them in your Tesla
I printed it at .12 layer height but it would work just fine at the usual .2
Finally do sports without worrying for your earbuds falling. Printed on PETG, about 15 minutes print. Make sure to reflect the model on the X axis horizontally so you can print each side. They snap from the outside into position. For more…
The smaller model is for phone speakers, and ear buds or other small electronics where particles and debris may gather. The larger model is for larger electronics like keyboards or mice. One side has a “pick” and the other side has a…
Samsung Galaxy Buds 3 Pro Cradle for wireless charging in Tesla Model 3 / Y. Not sure about compatibility with the refreshed model 3 / Y. If you print it, please leave a make / feedback. I'd like to see your results :) Step-file added, if…
Organizer for cotton pads and cotton buds
Stylish case cover for your galaxy buds. It should fit the pro, the live and the buds 2 cases. The top and bottom of the case just snap in place and is easy to remove and put back on if needed. I have added a small hole so the front led…
Doesn't need any glue, you can slide it on/off pretty easily, but it won't fall off on it's own. Bottom case also has small hole for the led light. File includes 2 versions of bottom half of the case with and without hole for charging.…
Xiaomi Mi Earbuds Basic 2 True Wireless ear hook so they don't fall out of your ear. They can even be placed inside the charging box (but you need to take them off to charge. Printed in ABS. 0.2 layer height. It also let me use a slightly…
Reliable headphones require reliable protection. I decided not to buy a ready-made solution, but to make a model that will be convenient for many users of Huawei FreeBuds SE 2 headphones.
I found i was losing my Galaxy Buds in my pockets and couldn't find them so easily. Thought to myself it would be great if i could clip them to my keys or inside my bag or something and find them a lot easier. Voila, It holds the Buds…
Uses this connector: https://www.amazon.com/gp/product/B078M793HW/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
A remix of @jgentry's slick 3-in-1 charging stand designed to accommodate my new Pixel Watch 4. I essentially cut off the Apple Watch charger portion, then modeled on a Pixel Watch 4 socket in OpenSCAD using some measurements I took.…
This print is a simple, two part storage container to protect your earbuds' silicone tips. There are two sizes available: one that can hold 6 tips and one that can hold 8. The support pegs also have two sizes: a standard option and a…
EDIT: Added Fusion360 file or easier remixing, internal diameter and lenght are parametric. Heads up, the parameter for internal diameter should be set 2mm wider than the actual result, I made the inner wall 1mm thicker at one point so…
Tired of my buds falling on the ground, and not being supported. Tried a silicon case, but it just didnt work, so now, I have this. Update 1 : added charging light hole as an option Update 2: Put up better looking pictures
Google pixel buds 2 charging dock. It uses the cable that came with the buds to slot in and dock with. Other cables might work but haven't been tested.
You can stick the holder with double-sided adhesive tape
Could not find a Pixel Buds Pro Dummy file that I could use for creating/modeling a Docking/case for my Pixel Buds Pro. Added another challenge to modelling the charging case according to the official dimensions of the Google Pixel Buds…
This is my custom design for a case for the CMF By Nothing Buds Pro 2. The case consists of two parts — a top and a bottom — due to the hinge design. While it’s not the most protective case, being quite thin, it does help guard against…
a stand for charge your galaxy watch 4 and at the same time yours galaxy buds FE, perfect design for the original cable
Pixel Buds Pro stand for Gridfinity. Should fit OG Pixel Buds and Pixel Buds A-Series as well.
Cotton buds jar is a second model in MakeUp Acanth style collection. See also: https://www.printables.com/model/1298497-sponge-jar-acanth-style https://www.printables.com/model/1306444-liquid-soap-jar-acanth-style
A dock for charging the first generation of Beats Studio buds earphones
My initial design caused too much echoing, so here is a version that seems to give a slight white noise effect at first, then just dampening. There are two versions, the first model has a short stem to the fitted earbud. The second has a…
I tried to find container for cotton pads and buds - but all were bulky and heavy. So I decided to design my version, which can be printed in vase mode. It's important to use the exact layer height and other settings as I mentioned to get…
Printed in ABS, your mileage may vary with other filaments. The watch charging puck does have a very tight fit. The design uses this magsafe charger: Anker 313 magnetic wireless charger
The case is made of PLA, but it can easily be reproduced using other materials, although I recommend using rigid materials since the body and lid snap together. To open the lid, a slight force on the corners is required. Additionally,…
A holder for your Galaxy Buds 2 Pro headphones that can be mounted on Skadis pegboards. This model allows for secure attachment, as well as giving you access to the USB port from below, for easy charging. You can even keep the case…
If you want a practical holder for your favorite Samsung Galaxy Buds3 (or Pro version) headphones that will be compatible with the Honeycomb storage wall system (or Multiboard if you want...or if you want to stick it somewhere) - you've…
Simple stand that holds the Pixel 9 Pro Fold and is compatible with the JSAUX wireless charger and generic Pixel watch charger (links below). The a USB-C will be needed for the Pixel Buds Pro. My primary goal was to be able to accommodate…
This was a design I had drafted after seeing Tonitom AirPods Pro Case Molle Clip. This is for the first generation Skullcandy Dime Earbuds case. I did not duplicate the design for the Molle Clip from the original. As stated in the…
Uses this 90 degree connector: https://www.amazon.com/gp/product/B078M793HW/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I am a motorcyclist and I created this cover for the CMF Buds Pro 2 case to take advantage of the case controls when I am on the move (answer calls, voice assistant, volume control, etc.). These headphones are really great for this…
It's simple dock for CMF Buds Pro 2 using OG USB-C cable. No supports, 0,2 layer For custom back use provided .3mf file, for different designs just change infill of inner part.
Gridfinity 1x2x4 for Galaxy Buds Pro 3.
It gets pretty hard getting the earwax out of your earbuds some times and it would be nice if there was a tool for doing it. Well worry no more because here it is! This earbud cleaning tool is super easy to print, and it takes only a few…
A Remix of the Pixel buds 2 charging dock by user 'ben_bionic'. Here's a Remix that removes the Google ‘G’, as i really prefer a cleaner look. If the type-c cable tends to come up with the Pixel Buds, I suggest wrapping the end of the…
If you accidentally loose one of the ear buds… Print with soft filament (TPU) standing on the connecting end Only 1 perimeter, 2 top layers, brim at least 3mm
Remix of bottom part of case with added clip. Print with diagonal orientation on photo.
Can someone with a Model Y try this out to see if the width is the same as the Model 3?
I like to carry my Buds Pro 2 on my belt or sometimes I like to hook it to my back pack. I've made two different models with each of these uses: one for your pants to hook onto, and one that you can add a keyring to to hook it onto your…
Prints upside down without supports. I personally printed in PLA with 0.24 layer height and 15% infill.
2x1 Galaxy buds holder for the Gridfinity system. Print details: Ender 3 S1 PRO PLA 15% Infill CHEP EXTRA FAST 0.28MM CURA SETTINGS
It's a makeup removal holder that I designed quickly for my wife. From left to right you can have your makeup bottle, cotton pads and cotton buds stored by the sink or wherever. The cotton pads holder is tall so you don't have to refill…
Use any material , on ay printer . I have used 0.4 nozzel , 0.2 step , with PLA
Hallo zusammen, ich habe für mein Büro eine Ladestation entworfen, welche folgende Geräte aufnehmen und laden kann. Platzsparend alles an einem Ort. Google Pixel 8 Pro über induktion mittels Magsafe zuladen…
Stand for cotton buds and cotton swabs in the shape of a heart for your wife or girlfriend. Added two print files for 0.2 layer printing. Box is resealable to prevent dust from settling on cotton swabs.
Remixed JBL tune flex holder with Ikea Skadis peg board "connector"
An F-15 Themed charging station. This station supports most cell phones, as well as apple watches and some galaxy watch models. The tower was made to charge galaxy buds, however it also works with AirPods, and possibly other earbud…
A 3D Scan of the Samsung Galaxy Buds
