Wyniki wyszukiwania: buff

Buffalo Bills Logo

Buffalo Bills Logo 1st Layer White 2nd Red 3rd Blue

H0 scale buffer stop

This is a generic buffer stop for HO scale model railroad. The model snaps to rails of around 1mm width (with 16.5mm gauge). I modeled it to resemble PIKO buffer stop, but it fits other track systems (I tested it on my mehano tracks).…

Loading aid for the MMU3 buffer segment R3

Threading the filament into the buffer is still very awkward for me. You have to remove the segmenter, thread the filament around the roll and then push it up to the MMU, start the loading process of the MMU and then reinstall the…

Loading aid for the MMU3 buffer segment R4

Similarly to remix from @ticat_105850 , this remix significantly simplifies the insertion of the filament into the buffer (but uses newer R4 segments). Simply insert the ribbon fully into the cassette, push filament all the way into the…

MMU2S filament buffer upgrade for Samla 22l Drybox.

With this upgrade you can keep your filaments dry and organized in a very small footprint. You do not need anymore the filament buffer. These designs should be compatible with all 200 mm Spools which has a round (Das Filament type) or…

MMU Buffer

This is my version of the buffer required for the MMU (or MMU2s) I based my design on other similar buffers but wanted to add some modifications so I redesigned this one completely from scratch. The wheel turns very smoothly on a 6200…

Filament buffer for Original Prusa i3 Multi Material upgrade

This filament buffer is placed between filament spool holders and Multi Material Upgrade for Original P313 MK3/S. Prevents tangling of returning filaments during color changes in multicolor prints. It can be placed on a table or mounted…

Prusa Mk4/MMU3 & Mk3S/ MMU2S Tower Print Buffer

August 20, 2024: Re-uploaded the unique MK4 parts as the original upload appear to be corrupt. This Tower Print Buffer has been updated to work with the MK4 and MMU3 system (It still works with the Mk3 and MMU2 as well). The frame mounted…

Slug Buffet (slug-trap)

This slug trap consists of three parts: The ring shaped 'feeder' is placed on the garden ground and is filled with slug pellets (based on Iron III phosphate). The 'peg' is pierced through the middle hole of the feeder and holds everything…

MMU2S buffer space hook - screwable

Buffer space hook which allows screwing the buffer to the wall.

Buffer Stop Track - S

Double-sided short-length straight rail compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2…

PRUSA MMU3-Buffer filament threading support, Loading aid

update october 2023: I added new optimized version V2. This works a little bit better for me. Feedback are welcome. I recently got my MMU3. Unfortunately, threading the filament into the buffer is very difficult if you have to hold…

Buffer Stop Track - R

Double-sided short-length straight rail compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2…

MMU2s Filament Buffer LACK Mount

I needed a way to mount the Filament Buffer for the Prusa MMU2s. I started with the existing "s-buffer-spacer" stl from Prusa ( https://www.prusa3d.com/prusa-i3-printable-parts/ ) and came up with this mounting plate for the side of an…

Buffer Stop Insert - Brio/IKEA Wooden Train Track

Print with the stop pointed up, no support, 15% infill. I did 1mm walls and top/bottom layers with a 0.4mm nozzle at 0.2mm layer height.

Hanging Buffer Mount

This is a hanging mount for the Original MMU2(s) Filament Buffer. [PC4-M6 Version] Features: Quick & Easy to load Reuses most of the original parts Keeps the Buffer out of the way Clean simple filament path to the MMU2(s) (Prevents MMU…

Top Loading Buffer Segmenter for MMU3

This attachment adds a spool buffer mounting port to the top of the Cassette Buffer. This attachment is made by modifying the official segmenter-R3.stl file. The usual rear attachment port is retained, so you can use either the top or the…

Buffalo Bills Coasters

Fun set of 4 Buffalo Bills coasters with holder. Print them all, or just a couple. Model files included for those of you who do not have the same set up as me, or if you want to print more than 1 coaster at a time. 110mm (~4.25")…

MMU2S buffer space hook - 10° angled, screwable

Buffer space hook which allows screwing the buffer 10° angled.

Buffer tube sling point (nexus pro)

The nexus pro is devoid of any sort of sling point and I am planning on using it as a secondary to my Aeon pro. While the Aeon pro is just as accurate (if not more during my testing) it isn't as consistent as the Nexus because it doesn't…

Prusa MMU3 Low-Friction Drybox Filament Buffer

Overview For a video tour of this tower setup, please visit this reddit post . In this video I explain how this quick-release system works along with some of the other upgrades that I have made for my Prusa i3MK3S+ with MMU3! (: This new…

Buffalo Bills Josh Allen Bottle Opener

Printing and using this bottle opener will significantly increase the chances of the Buffalo Bills winning the Super Bowl. Printed in PLA with two colors. Insert a penny to allow this tool to open bottles. It is press-fit Enjoy! Go Bills!!

PrusaBox adapter hinged for "MMU2S Buffer (inspired by RMU Buffer)"

This is the hinged version of my design PrusaBox adapter for "MMU2S Buffer (inspired by RMU Buffer)" so that you can also open the side door with minimal effort. I kept the original box hinge design language so that it does not appear…

MMU3/MMU2s Buffer holder in back of Original Prusa Enclosure

MMU3 Buffer holder, which can be in the Original Prusa Enclosure behind the printer. Ideal solution, if you don't want to have it outside, but still “easy” access to it. It is situated in the right back corner. The depth of it is 67mm,…

Buffalo skull on the hood of an RC car

Hello, Welcome to my profile, full of models and miniatures :-) I have a Buffalo skull for you on the hood of your RC Car. The skull is very nicely done and you have 2 versions from me - 1:10 and 1:12. It can be attached to the hood using…

PrusaBox adapter for "MMU2S Buffer (inspired by RMU Buffer)"

I also designed a hinged version PrusaBox adapter hinged for "MMU2S Buffer (inspired by RMU Buffer)" so that you can also open the side door with minimal effort. I kept the original box hinge design language so that it does not appear…

Buffed Jesus figure

Hinged buffer assembly and loading fork for Prusa core one

I didn't like how the buffer held on (barely) to the printer, doesn't work with the loading fork, or was in the way when printing without the MMU. After trying other solutions without satisfaction, here's my attempt to fix all 3! More…

Prusa MMU3 or ERCF universal buffer, takes 900mm filament, mounts on IKEA Skadis or stand, USS compatible

Welcome, you MMU3 or ERCF users. I was kind of fed up with the spools standing around my Core One with MMU3 (former MK4S) so I installed 2 IKEA Skadis boards behind the printer to mount the spools. However, the Prusa buffer used a lot of…

MMU3 buffer hanger and corner ptfe support

Hier eine Möglichkeit den MMU3 Buffer aufzuhängen. Ich habe die Strebe an den Segmenter geklebt. Die kleinen haken in entsprechendem Abstand an die Wand geschraubt und schon kann man den Buffer einhängen. Da es sich in meiner…

Swiss-style Polishing Wheel Buff Rake/Comb

This tool acts as a mount for Bergeon item BG7118 “Reload for comb”. It is essentially a replacement for BG7116 “Comb to card” with some modifications for ease of assembly, printing, and usability. Once assembled, you will be able to use…

MMU3 Buffer Mounts

The M3 Square nuts (2 each) are sized for the more commonly available size (2.3mm thick) - the Prusa nuts are slightly thinner (1.7 mm) and will slide out of the slots. When used just to hold the buffer plates together, 2 M3x25 or M3x30…

Buffer Attachment for HOMCOM Bicycle Trailer [PETG]

I recently purchased a bike trailer (also known as fietskar/ Lastenanhänger). Its frame is made of 20 mm diameter metal pipes. (EAN: 4251774961240) I designed this “clamp and insert” buffer attachment to protect the frame paint when I set…

MMU2S Buffer (inspired by RMU Buffer)

Hello all, when I saw the RMU ( LINK ) I was blown away ... unfortunately I miss the open source and community idea :-( So I decided to create my own version of a mountable buffer and yes I certainly got inspired by the RMU version. No…

Bambu Lab Filament Buffer PTFE Tube Removal Tool V2

This tool is used to remove the PTFE tube from both ends of the Bambu Lab filament buffer or AMS hub. *Edit - I added a hole for a magnet to hang it on the back for storage. Thanks to djwhouse for the idea. There are options for circular…

MMU Slot buffer

MMU Slot buffer – FINAL version Hi everyone, here is my new design of a MMU buffer. Thank you Juergen G. for test prints and wasted material on the development from BETA version to this FINAL SLOT buffer version. As I am changing…

Bambu AMS filament buffer fix

This adapter aligns the PTFE tube that delivers filament from the AMS to the filament buffer to prevent jamming that leads to filament loading errors such as “failed to feed the filament into the toolhead” (e.g. 0700 8006 142105, 0700…

Ikea Samla 45l Filament Buffering Dry Box V2

Summary Smart Dry Box designed for the Ikea Samla 45l box. It supports 6 spools, each buffered by a fully enclosed wheel buffer utilizing the complete box height. Spools, Buffers and Desiccant containers all can easily be loaded from the…

Spool Holder & Buffer for Core One MMU3 Community Version

CHANGELOG Main Instructions follow. 30/10/25 - Added spoolholder_spindle_mk4, spoolholder_roller_mk4 and buffer_mk4 by request. To keep things simple, these versions cut away some material to get them to fit on a MK4 bed. Reported to…

5 Wheel Buffer for MMU2

An alternate solution to MMU2S buffer. Easy to locate away from filament and easy to load. Somewhat of a remix (or at least inspired by) https://www.thingiverse.com/thing:3529934 from jgillick EDIT: Loop the filament around the wheel…

MMU3 Cassette Compatible Buffer

This unit is to replace some of the stock MMU3 buffer while using the new cassette system. I have included a bracket to hang the buffer assembly from the back wall of the enclosure but it may not allow the proper clearances as I have not…

Air Buffer Grow Tent + Filter

This is a Air Buffer to prevent light from coming inside the tent but still enable air to flow. I recommend printing it in black or any other dark color to restrict as much light as possible. Outer Diameter is 160mm such as the holes in…

MMU3 Cassette Compatible Buffer for Prusa Mk4 / R4 Casettes

Remix of the great, compact filament buffer by @Paul_75970 that makes it compatible with the MMU3 R4 cassettes (Version B). Since I also wanted to use the remix of R4 cassettes , I couldn't use @mikedmor remix which squishes the…

Buff Shrek

Shrek went to the gym.

**UPDATED** Integrated Spool Holder + Buffer for Core ONE & MMU3 MKII

Tired of managing messy filament tubes and bulky buffers? Here’s a sleek, all-in-one solution built for your MMU3 A compact filament management solution for multi-material printing. I needed a space-saving alternative to the stock Prusa…

Remix MMU2S Buffer (Inspired by RMU Buffer)

I wanted mine to look like the OG and have a top load option, so I remixed it do that. The mounting files can be found on the original post that I linked. This only includes the files I changed.

buffalo Bills helmet

a buffalo bills helmet remixed from "FootBall Helmet" by choochoo2121862 using "Buffalo Bills - Logo" by CSD_Salzburg Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: Doesn't Matter…

Fully enclosed MMU2 wheel buffer with screw holes and PTFE clamp

For my printer enclosure I needed something with screw holes so I added some. Also I designed a clamp for the PTFE tubes so they won't get sucked in. Just use a M3 10mm screw and a hex nut (there should be enough in the MMU2 spare parts…

Buffer Stop - Brio/IKEA Wooden Train Track

End track compatible with Brio, IKEA Lillabo (old plastic dogbone and current wooden-only version too), Thomas Train, Kaufland, LIDL Playtive, kmart, ebay,... wooden tracks. Print instructions Support: NO, Infill: 15 %. CHECK OUT other…

Buffalo / North American Bison skull

Best to print on resin printer, but can be sliced into pieces to print on FDM printers

LEGO City Train compatible various crossing, buffers, etc.

<<<text and pictures are not mine but reuploaded along with original model and licence, my own comment and pictures will be in the “make” section>>> Summary Various lego compatible train track crossing , buffers and other bits Stuff iI've…

MMU2S Filament Buffer

Filament buffer to have the least amount of parts and improved wheel. The stands can be attached to the base using M3-10 screws, while everything else just slides in place. If needed a a small dab of CA on the ends will help secure the…

Buff Rock

rock but buff

Buffalo Bills Logo

Buffalo Bills logo, with integrated sawtooth hanger on the back. Print in one color and hand paint, print with MM, or print with color change at height (single extruder - see below for layers/heights). Color change at layer instructions:…

Quick load MMU filament buffer

5 July 20 update: Added a step file of the assembly If you're like me, you struggle loading the stock buffer. I've tried several auto rewind spool holders but have struggled to get them to work, particularly if the pool is full and not…

Fixed Picatinny buffer tube

A fixed AR-15 style, mil-spec buffer tube that attaches to Picatinny stock interfaces. Printed in a single piece lying flat for incresed sturdiness. Mounts with two M5x30 bolts and M5 Hex nuts. The tube has 4 postions for the stock to…

Picatinny Buffer Plug

Update 08/14/2021: Updated EndplateV2 to keep it from catching on the charging handle. Update 08/10/2021: Added a V2 Endplate that allows the use of metal endplates. Added a hole in the Rail so that the Endplate can be removed from the…

MMU3 buffer mount

I modified the plate holders to be able to mount them with 3.0mm screws. This way I was be able to mount it straight on my Ikea Lack enclosure. Now I am be able to feed the filament from my repbox on top, to the back side of the Ikea Lack…

buff hello kitty

painted using acrylic paint

Improved Spool Wheel (print without support) for RMU inspired MMU2S Buffer

I really appreciate Manzn 's awesome work on the RMU inspired MMU2S Buffer . Unfortunately a clean print of their supplied spool wheels is not possible without using supports, which are tedious to remove and often leave remains…

Buff Kitty

Printer: AnkerMake M5C Filament: Polymaker PolyTerra PLA (Marble White) Layer Height: 0.1mm Supports: Yes

Prusa MMU2S/MMU3 Slot Buffer Holder

This MMUS Slot Buffer Holder uses this others parts : Numbered Slot Covers by cjbeck : https://www.thingiverse.com/thing:4540766 See the Assembly.pdf file.

Fully printable Prusa MMU2 Filament Retract Bank (Buffer)

Update 1: I've updated the base a little - made the filament channel wider and added a chamfer on the entrance TNDave was kind enough to let me modify his awesome design, so I've made a fully printable version (you don't need the acrylic…

Bambu Lab Buffer Tube Removal Tool

Hi, this is based on similar models to assist with removing the tube from the input side of the buffer. Main changes were to make it more printable from the fitting side. Also changed to look more aesthetically pleasing.

MMU3 original Prusa Enclosure Buffer Plate Holder

English: You need 3x M3-Nuts and 3x M3 Screws with a minimal length of 12mm. Furthermore you need to print 4x my remix of the original plate holder (small hole on one side).…

Spike Buffies - Brawl Stars

Keychain may or may not work. Somebody let me know Supercell plz nerf

Buffalo 3D Scan

I am currently testing my open-source 3D Scanner: OpenScan Mini + Cloud Processing, where it took 10mins from start to finish :) This is one of many figurines, that I am currently digitizing. If you are looking for any particular animal…

Nerf Raider Inspired Buffer Tube Stock

Hello everyone! This is a 3D printed buffer tube stock that I have designed to closely resemble the Nerf Raider stock. I love the look and feel of the Raider stock, and I thought it would be fun to model the stock in case I ever wanted to…

Lego compatible train track buffers.

This is a remix of: https://www.thingiverse.com/thing:5266343 by vaxx1969 for easier printing and better connection to original LEGO tracks. Printed from eSun PETG The licence matches the original.

Bambu AMS Buffer Hub Remove Button

This is a remake of https://www.printables.com/model/272302-bambu-lab-ams-hub-ptfe-button, the difference is that its been shrunk with the bowden tube inside, so it fits on the AMS Hub PTFE Tubes which makes it backwards compatible with…

Airsoft Buffer Tube, Castle Nut, and End Plate

I had an airsoft rifle that needed a new buffer tube. The threads were metric (29mm, 1.5 Pitch) and nothing quite lined up with mil-spec standards… so I made my own. I hope it helps someone else. Might at least help in a pinch while…

The Shark Filament Buffer and Drybox System (V6)

The Shark filament dry box system has been through many iterations, and is finally at a a stage I'd say is “finished”. It's named because of the shark fin shaped filament guide that makes it possible to load filament easily. The main…

UNW: FGC9 / FGC6 / MKII or MKI thread in AR buffer tube adapter TAKE2 and TAKE3

this model is made to work the MKII but I have fitted it on a MKI model als well and the mount looks good on that one as well so you can use it for that as well. for FGC6 users this is model ready to use with out any risk. for FGC9 users…

DLD Filament Buffer for MMU

This is a “ground-up” model inspired by "The Wedge RMU Mk3" Buffer. https://filamentbuffer.co.uk/ I did a lot of research on buffer systems and found the approach taken by their design was almost exactly the form factor I wanted. I didn't…

FGC-6 MKII: Partisan 9 folding stock and AR buffer tube ver

(SF bolt checked: works with the SF bolt ) this model is designed for the MKII version of the FGC6 but it should also clear the MKI model. also a note this folding stock is compatible with the FGC6SF models credit note: most parts in this…

H0 Rail Buffer Stop Prellbock 1:87

Modell train rail buffer for scale H0 1:87. Works on Märklin C-Gleis. It should also work on ather main manufactured H0 rails, like Fleischmann, Piko, Roco Settings Value Infill 15% Perimeters 2 Layer Height 0.2 mm Material PETG (PLA)…

SOVOL SV08 MAX AUTO FEEDER BUFFER PTFE TUBE FILAMENT GUIDE

Help guide your PTFE tube out of the top of your auto feeder buffer to ensure reliable operation & stop it getting pulled over too far & jamming! BOM: No hardware needed PRINTING: Print PETG/ASA/ABS 0.2-0.3 layer height, 4 walls. Lay…

Filament PTFE Buffer Tool

This is a simple filament PTFE tube tool used to disengage the PTFE tube from the connector. On the Bambu Lab X1 the connector is recessed in the buffer assembly and per Bambu Lab instructions, you need to detach the buffer, then press…

MMU2 filament buffer

This is a modification to the filament buffer kit that comes with the MMU2s. I think that the original design of the buffer is to much of a hassle to load, since you don't have enough room to grab and push the filament towards the MMU.…

Buff KUROMI

I used acrylic paint

buff dummy 13

my buff dummy 13 reuploaded from maker world! this is my first model on printables so I don't know if people will like it. you can find more of my work here! https://makerworld.com/en/@FA11 if you are wondering about the extra necks they…

MMU2S Buffer (RMU Inspired) - Top part only

I need mine to be loaded from the top as spools are on top. I also added "washers" to properly center the 5 wheels, it prevents from touching the other parts while rotating and they press properly the bearing axis. Make sure to assemble…

Buffalo

A strong yet cuddly buffalo with a rounded, compact body, tiny curved horns, and a soft, chunky silhouette. Its gentle dot eyes and stubby legs give it a calm and approachable feel, perfect for vintage toy lovers. Finished with a smooth…

CMMG AR15 .22LR AR22 Buffer spring spacer

I made this spacer for CMMG .22LR conversion kits. It's installed in place of the stock AR15 buffer weight, and uses the stock AR15 buffer spring to apply pressure on the back plate of the CMMG BCG so that it has no movement when the bolt…

LEGO Train Buffer Stop

LEGO Train Buffer Stop

Anycubic ACE Pro Buffer Guide

Anycubic ACE Pro Buffer Guide — designed to improve PTFE tube alignment with the ACE Pro filament buffer and reduce feeding errors caused by the limited travel of the buffer mechanism due to angled PTFE tubing. This helps prevent filament…

filament buffer (airtight, compact & easy to fill) for Prusa MMU2.0

This is an "airtight", compact and easy to fill filament buffer for your MMU2.0 setup. It uses a check valve for the filament so it is not pushed back on to the spools. Watch the video below on how it works. Print instructions How to fill…

MMU BOX – Rewind Buffer System for Prusa MMU3 (Modular Multi-Material Filament Management)

MMU BOX is a mechanically engineered, mostly 3D-printable rewind buffer system designed specifically for the Prusa MMU3. It replaces the stock filament buffer with a compact, modular system featuring independent active rewind per spool.…

IKEA Lillabo / BRIO Wooden Train Buffer Stop

This is a buffer stop female and male version. Have a lot of fun with it. Print Settings Printer Brand: Anycubic Printer: Predator Rafts: No Supports: Yes Resolution: 0.2 Infill: 25% Filament: Filemantwerk PLA light ivory Category:…

Ikea lack mmu3 buffer holder

I remixed the segmenter-R3 from : https://www.printables.com/model/531604-mmu3-printable-parts https://www.printables.com/model/638915-closed-segmenter-mmu3 I now made another remix of the mmu3 buffer segmenter. I designed one which is be…

MMU3 buffer holder(for IKEA LACK enclosure v2)

This is a remix of original prusa mmu3 buffer holder. No supports are needed to print this file. Part 2: https://www.printables.com/model/610056-mmu3-top-ptfe-holderfor-ikea-lack-enclosure-v2 I made this model so i could keep my spools on…

Bambu AMS Disconnect tool for 4 port HUB and 1 port filament buffer

See “ Differences of the remix compared to the original” section for changes description.

Multicolor Deep Rock Galactic Buff Mug

This is a model of the beer mug used for “buffing” beers such as Pots O' Gold, from the video game Deep Rock Galactic. It's sized to fit a 355mm/12oz can precisely. The color scheme in the photos and file uses the color scheme from Pots…

Samla 22L - All-in-One - Compact Drybox, Silica gel container, MMU2 buffer, Storage, Auto-Rewind for 4 standard filament spools

Hello, I have been using my Samla 22L - All-in-One - Compact Dryboxfor for more than a year. The operation is still problem-free. Now the time has come to add silica gel trays and small improvements. I incorporated the comments and here…

Buffalo Bills Logo Stand

I've made two versions: Single Color Modell (or MMU but unpainted) Multicolor Modell by Layershift You will need Support - But thats realy easy.

Bambu Lab Filament Buffer Outlet / AMS Hub Outlet Tool

*Note: Newer version available here This tool is to remove the PTFE tube from the outlet end of the Bambu Lab Filament Buffer or the AMS hub (the device on the back of the printer that joins multiple AMS units, not the device inside the…

Lego trains - buffers, magcoupler, wheels

When you have enough bricks around to build lego trains attachment car, but no spare couplers, buffers and wheels - and all stores are actualy closed due to holiday season :-)… Print settings Modelled according to actual lego pieces and…

Drybox Plug with Filament Buffer - for PTFE / Bowden Tube

A simple print that is used to close the end of a PTFE/Bowden tube. The special feature: The plug has a buffer for the filament so that you can easily pull it out of the tube after you pull the plug off. I use this plug with my (dyna)…

Ptfe clip for mmu2s buffer

Ptfe tube clips

Prusa Enclosure buffer adapter MMU2S/MMU3

This is a printable model for the Original Prusa Enclosure with the buffer of MMU2S/MMU3. How to print Use the default Prusa Slic3r Settings for PETG or ABS/ASA. No supports required. Printed with layer 0.2. Parts to print To use this…