18 209 modeli
A portable cable organizer which is setup as an easy print-in-place and includes a knob on the side for conveniently winding up the cable when you're ready to pack it away. This model is an easy print that requires no supports, and three…
Wydruk około 2,76 €–3,37 € nettoWstępna wycena jednego wariantu
UPDATE! GET THE NEW VERSION HERE -Charger Cable Organizer 2nd edition- Due to many not reading the print instructions i've now put the instructions on top of the descriptions. PLEASE READ BEFORE PRINTING!! " Print instructions: Version 1…
Wydruk około 0,65 €–0,80 € nettoWstępna wycena jednego wariantu
Get the latest version here → Charger Cable Organizer final edition -- THE CABLE WINDER II -- This design is an updated and improved version of my popular design “ Charger Cable Organizer ” Thanks to all that posted feedback and makes of…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
If you don't have a 3D-printer you can buy a set of 3 pcs printed here → Buy it here! The cable organizer is designed to fit all standard USB type cables with a diameter of 3-5mm. 2 slots for 2mm cable. 2 slots for 3mm cable. 2 slots for…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
The charging cable always breaks at the same position, just right under the plug. Don't replace it, Repair it with this easy print! This works for Apple USBC and lightning, as well as for samsung charging cables! No glue or tape is…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
Simple but very usefull cable organizer for your cables. I was inspired by other clips in database but all clips are unsatisfying for me. For ex.: 1) Too big spaces and cables leave the clip. 2) Too long clip and unnecessary wasted…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Heatbed Cable on my MK3 was starting to sag and catch on the frame of the printer. So not wanting to pull it all apart I made a simple clip on support that does not require any tools or disassembly to fit. There is also a version for…
Wydruk około 0,53 €–0,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model is designed to utilize the last few meters of your filament spool to create a useful cable tie! My idea for the contest was I wanted something that would always be useful every time you printed it, and I've been wanting to try…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
Wind. Store. Go. Keep your charging cables neatly wound in a reusable organizer with a textured outer grip. Choose Large or Mini, with an open-bridge Mini option for larger connectors. Easy winding: a broad spool plate gives your fingers…
Wydruk około 5,14 €–6,29 € nettoWstępna wycena jednego wariantu
I seen the contest: last meters to make good use of the last meters you have. So i thought lets do something. im not a designer, but i wanted to make something to minimize plastic waste and make something useful. i made some small cable…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
Update: Stronger, better cable guide, better tolerances
Wydruk około 0,21 €–0,25 € nettoWstępna wycena jednego wariantu
Dock. Charge. Tidy. A charging stand with built-in storage for excess cable — for a tidy desk or bedside table. Tidy cable storage inside the dock. Size-specific versions for your Apple Watch. Easy to print without supports. Choose your…
Wydruk około 3,28 €–4,00 € nettoWstępna wycena jednego wariantu
What and why? Since i have been asked about my other design of cable glands if it could be available in other sizes, I thought about in and designed a parametric model. This didn't take long. Exporting the stl for all sizes was a bit…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
I designed this heatbed cable cover, because the ones available were designed to complex and too far off the original design. I needed an angled cable cover to reduce the length of the printer, so I can fit it inside an IKEA Platsa…
Wydruk około 0,51 €–0,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update: Extra hole for screw mounting ( d = 3 mm )
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
This is a cable reel for storing your cable quickly and in a compact manner. Just center it on your cable,wind it up and you're ready to go. When you need to use your cable, just pull the cable from both ends until you have the length you…
Wydruk około 0,93 €–1,14 € nettoWstępna wycena jednego wariantu
Update: Print in place hinge, better snap, better opening handle Print orientation: side
Wydruk około 0,57 €–0,70 € nettoWstępna wycena jednego wariantu
Electric Cable mounts, mounted using screws D=3mm or double sided tape. Parametric using the STEP file :)
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
Unstable fusion360 source file It seems like a recent F360 update broke the model file. Since it is not the first time, I'm in the process of ditching Fusion360 from my workflow altogether. I'm learning FreeCAD and will attempt a redesign…
Wydruk około 1,51 €–1,85 € nettoWstępna wycena jednego wariantu
Print in vase mode without bottom layer. With the Mk3 you absolutely need the new bearing clips https://www.prusa3d.com/product/bearing-clips-mk3s/ The mirrored part cover also the other end of the cables.
Wydruk około 1,28 €–1,56 € nettoWstępna wycena jednego wariantu
As the name in the Title might suggest, this is the Cabelcuff its a cable organizer/tidier to doing the same job, that a zip tie or a wire wrapped around your cable bundle would do, but quicker, reusable, 3d printed and with a really…
Wydruk około 0,20 €–0,25 € nettoWstępna wycena jednego wariantu
Update 16.12.23: STL files are now available English: A raised laptop stand with a honeycomb design. Additional I designed a fitting tray to hold the clutter of your desktop and a cable clamp that can bei fittet into the honeycombs where…
Wydruk około 5,31 €–6,49 € nettoWstępna wycena jednego wariantu
This a simple cable organizer that is designed to be screwed into place. Designed to be printed without support. ------------- UPDATE: In celebration of passing 100 downloads in one month I decided to give this model some love, so I have…
Wydruk około 2,39 €–2,92 € nettoWstępna wycena jednego wariantu
Introduction Inspired by "Cable Corners... keep cables in corners!" by muzz64 on Thingiverse Fusion 360 parametric design This is for bend-sensitive cables, such as Cat 6 and Cat 6A. In the case of these cables, the curvature of the bend…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu
Electric Cable mounts, mounted using double sided tape. Parametric using the STEP file :)
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
A simple cable organizer when you really have to many cables to manage. The design is similar to what you can find in computer room (usually it is several meters in length and you cut it to size, but here we are limited to the print bed…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Electric Cable mounts, mounted using screws D=3mm or double sided tape. Perfect for single or multiple cables :)
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
For bigger cabels: https://www.printables.com/model/1203677-gridfinity-cable-organizer-big-cabel-2x3 this is inspired by: https://www.printables.com/model/274250-ikea-alex-cable-organizer but it's completely redrawn with different sizes…
Wydruk około 3,22 €–3,94 € nettoWstępna wycena jednego wariantu
Pi Camera V2.1 Mount With Optional X Axis Cable Strain Relief for the Prusa MK3S & MK3S+ Printers. Note: added mount for MK3S+ (MK3SPlus_X-Axis_Bracket_Pi_Camera_Mount v1.stl). This is the only part that differs from the original MK3S.…
Wydruk około 1,67 €–2,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
After seeing @i6o6 “Simplest cable organizer” , I feel in love with the idea of a dead simple cable organization system but ended up wondering if I could make a similar model that would be suitable to be printed extremely quickly using a…
Wydruk około 0,83 €–1,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple yet effective corner cable mount designed for zip tie usage. This model allows you to secure cables neatly along 90° corners — ideal for walls, desks, shelves, or inside enclosures. Features: Designed for use with standard zip…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
A Multipart Pinecil Case remix that is a bit taller (+5.2mm) with a different set of cutouts and accessories allowing a full set of spare tips to be stored. The dimensions have been change to allow clearance for a 2nd tip mount which…
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
Update: Slim version → Fast print time :)
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
2026 Update: It looks like since the original launch of the Steam Deck some chargers might come with different length of cable now. My original release charger has 1.5m of cable and it is already a tough fit even when rolled up tightly.…
Wydruk około 4,46 €–5,45 € nettoWstępna wycena jednego wariantu
*/update: I added two more versions. They are both smaller than the original and have one single solid hook. This makes it stronger and it can be printed without supports, and I never used the hooks individually on the original version.…
Wydruk około 5,85 €–7,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UPDATED to V2 V2 now has a hidden mounting plate for a slim design and easy installation. Make sure to mount the plate with the hole named “up” in the up position. Use at least 4 perimeters on the mounting plate due to stress on this…
Wydruk około 11,54 €–14,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This my take on Prusa i3 MK3S Heatbed Cable Cover. I remixed the angled version so my printer fits better to the Ikea Lack table enclosure. Print instructions Unassociated tags: heatbed cable cover, prusa heatbed cover Category: 3D…
Wydruk około 0,78 €–0,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Support me & Join Printables Club The best protection for the cables laying on the floor.
Wydruk około 1,80 €–2,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update: redesigned version available here: https://www.printables.com/model/607312-ziptag-v20 ----------------- Introducing ZipTag. Easy and quick to print (5-6min per piece) zip tie style tag. Useful for cables, bags and other items. I…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A wall mountable cable hanger with 15 5mm wide slots for organizing audio, music, patch, and computer cables. I designed it to hold my 3.5mm eurorack patch cables and also sized it so that two could be printed on a Prusa Mini at the same…
Wydruk około 10,70 €–13,08 € nettoWstępna wycena jednego wariantu
This is a mount for the new Starlink Mini antenna. It has spacers that can be scaled in the Z axis to adjust for different van roof ribs. They also act as a cable wrap for the 50 foot cable that comes with it. For the 2023 RAM Promaster I…
Wydruk około 17,03 €–20,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Lighting cable saver for standard Apple lighting cable. Suitable for USB-A to Lighting cable ( does not fit newer USB-C to Lighting ). The cable saver clips together to completely protect the cable. Print instructions I printed this in…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update: 26.03.2024: complete redesign! Based on the linked remix I have completely redesigned the model. It is now fully compatible even with Elegoo Neptune 3 / 4 Plus and Max. No supports are needed anymore! Compatibility Fully…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Cable Wall Clip for Nails Hey maker! 👋 Keep your cables tidy without buying huge packs from the DIY store. Features: Simple, fast-to-print design using minimal material. Three sizes included, or scale it yourself for custom fits. Perfect…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
printed with PLA, but can be Petg or TPU. TPU would be best choice. If you need some help, or need change the sizes please contact me
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
It's specifically designed not to wiggle, as pre-existing LCD cable clips for the MK3(S) did and thus were unsatisfactory to me. The opening of the "hook" should point down for a clean look and easy insertion of the LCD-cable. If this…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I got annoyed by not being able to either print of fit the 90º heat bed covers for MK3. So I took inspiration from the last model that I've tried and built my own version from scratch based on the original Prusa source files.
Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple, quick, reliable, non-invasive protection for your Mk4 bed cable. During my time with a Mk3, the heat bed cable was always protected from undue flexing due to sag by INeedOneDesigns excellent MK3 Heatbed Cable Support (Easy Clip…
Wydruk około 0,70 €–0,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Highlights: Print time less than 20 minutes Uses only 5.5 grams of filament per object Screws in to desk using either #6 screws (M3/M3.5 equivalent) or you could use command strips for a less permanent solution Does not require supports!…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
Spin it by 90° to have the big flat face on the print bed. Prints easily without support. I printed it in PLA(Prusa recycled PLA), although it might be better to print in a material that resists higher temperatures. A cable tie can be…
Wydruk około 0,92 €–1,13 € nettoWstępna wycena jednego wariantu
This are protector for the expensive original Apple Lighting cable, develop this thing to try to avoid buying new cables twice a year. Better if printed in TPU or flexible material, but works with PLA and ABS or Petg Basic setting, 0.2…
Wydruk około 0,61 €–0,75 € nettoWstępna wycena jednego wariantu
I like to screw my cable clips instead of using nails so I did these. The bigger one for normal cables can be used with Ø3mm or Ø3,5mm screws. The smaller one with Ø3mm screws Printing They are designed to be printed on the side with no…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
This fits gridfinfity systems and is 4x4 in size. There are 27 pockets, 3 different widths, and each has a 10mm radius at the bottom. I always prefer using Polymaker filaments. They print very well even when not perfectly dry. Very…
Wydruk około 45,00 €–55,00 € nettoWstępna wycena jednego wariantu
This is one of my most favourite projects I've ever made! It took me about 35 hours to design it , 80 hours to print it and a few more to test it out. Im running it now for hours and never had any problems or struggles with it. It looks…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
Remix of https://www.prusaprinters.org/prints/27742 . I needed a compact solution for the X-arm chain because my printer sits in a very tight space. The heatbed part worked perfectly for me and is unchanged. Print instructions Additional…
Wydruk około 1,04 €–1,27 € nettoWstępna wycena jednego wariantu
I have created better back cover of the cables going out of the heatbed used for PRUSA BOX. The original one has unsufficient space inside for the cables to be placed comfortably. My upgrade cover is almost of the same size, but the…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Added a 60° tail to the MK4 version of the strain relief. Made some additional cosmetic tweaks to the original files. Model is backwards compatible with MK3/S/S+ heatbed. Print per Prusa recommended settings. Update 10/6/23: The …btm.stl…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET
To follow on from and finish off my Ultimate Prusa MK4 casing I wanted to create a center tray similar to the original for the MK3 version . I was shown this cable cover and wanted to take this design and use it as the basis for the whole…
Wydruk około 2,99 €–3,66 € nettoWstępna wycena jednego wariantu
A clip to hold 5mm brake housing and 4mm shift housing together on your bike to keep things nice and tidy and rattle-free. Flat front design solves the problem where cables may pull away from each other ( see this design ). Also, its a…
Wydruk około 0,42 €–0,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Inspired by the viral tweet , modelled by me and printed by you, this VGA cable cover for your Apple Lightning cable is just what your inner 90s kid needs. Included is a Fusion 360 parametric model so you can change the cable plug size…
Wydruk około 0,92 €–1,13 € nettoWstępna wycena jednego wariantu
Notice If you don't need a magnetic holder check out my latest design HERE ! This is my design of the idea seen in some of the latest LinusTechTips videos. I am sure they will eventually come out with a great product so do check out their…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena jednego wariantu
Compact pebble shaped traveling case for the Pixel Watch 2 charger, with cable winding feature and power adapter mount.
Wydruk około 0,39 €–0,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Just another cable organizer for ROG ALLY power charger Change Log. V1.1 - Change fitment dimension - Add hole for cable outlet
Wydruk około 2,93 €–3,58 € nettoWstępna wycena jednego wariantu
I was sick of tangled cables on my desk, so I made this cable organizer/spool that keeps them organized. Now it's not the most pocketable but it's made to be on a desk. made to fit 1m long, 3mm thick cable (most of mine are this size) can…
Wydruk około 2,52 €–3,08 € nettoWstępna wycena jednego wariantu
A very basic print that can be mounted using a single screw. Works very well to organize wires underneath a desk. Support If you'd like to support me for the 3D models I distribute for free, you can use my AliExpress affiliate link:…
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
This is a replacement part based on the WindTech CC-6 Mic Stand Cable Clip for microphone stands and boom poles. My brother has a set of these from Sweetwater they work great. Eventually a couple ended up breaking, so I designed a…
Wydruk około 0,21 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A wall-mounted holder for your iron. Coiling up the cord every time seemed too fussy so I incorporated thegrateman's latching broom holder for cable management…
Wydruk około 4,12 €–5,04 € nettoWstępna wycena jednego wariantu
I created this remix because the original version was a bit larger than I needed, and I wanted to fit the cables in more snug. The original also broke when I went to attach the zip-ties, one bit snapped off. It was still usable, but I…
Wydruk około 0,95 €–1,16 € nettoWstępna wycena jednego wariantu
Best printed in Vase Mode with a large brim in the wrap is small. Can be scaled to fit any number of cables or sizes, using a FLEX material allows for a more bendy wrap, while a PLA offers a stiffer wrap for more rigid applications.
Wydruk około 1,18 €–1,44 € nettoWstępna wycena jednego wariantu
This is a slightly modified version of the MK3s heatbed bottom cover. I added a rear support for the cables with a channel for a zip-tie. This does add an additional 9mm to the length of the part, so tight enclosure/wall spaces should be…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This simple and stylish device holds your computer mouse cable above the desk, making use of the mouse more comfortable without the cable dragging around. Additionally, it has storage for the excess cable in the base, eliminating some of…
Wydruk około 6,99 €–8,54 € nettoWstępna wycena jednego wariantu
V1 is a rought adaption to fit the mini+ at all. V2 is a theoretical better fitting version as 3D-File. I haven't printed it yet but its verified through the comments. Probably works for mini as well. I just own the mini+ to test it. Use…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
After creating https://www.printables.com/model/717326, I wanted the chain to have a tighter curve as I lacked space behind the printer. Then I found https://www.printables.com/model/717488 which seemingly has a tighter curve. Since I…
Wydruk około 0,58 €–0,70 € nettoWstępna wycena jednego wariantu
cable slots 4 mm size W=30 x H=35 x L=164 mm best wall mounting with 3 x 20 mm countersunk screws. screw hole diameter 3.5 mm Print instructions print settings: PLA filament fill density 20% layer density 0.15 mm filament consumption:…
Wydruk około 4,25 €–5,20 € nettoWstępna wycena jednego wariantu
printed with petg, 20% infill.
Wydruk około 0,37 €–0,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
1] print the cable protector according to the diameter of your cable (2.5 / 3 / 4.5) 2] break the base : 3] insert your cable printing tip : print at 200°C (for PLA) activate the fan
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
Cable management clip for the Apple 70W USB-C Power Adapter. Based on the 67W adapter model from Petr Albrecht (the V2 model), I made a new design to fit the smaller 70W adapter (28.6x65mm). The adapter suits the Apple MacBook Air with M2…
Wydruk około 0,40 €–0,48 € nettoWstępna wycena jednego wariantu
Easy to print Print instructions Rafts: Not needed Supports: Not needed
Wydruk około 0,52 €–0,63 € nettoWstępna wycena jednego wariantu
I designed a clip to hold the G Sensor cable for the Ender 3 V3 SE printer, as I didn't like it hanging loose. I found another clip that attaches it to the top frame, but it wasn't functional for me because it stretched the cable too much…
Wydruk około 1,43 €–1,75 € nettoWstępna wycena jednego wariantu
14mm tall, solder cover for the heated bed cables.... Use M3 cap screws and 2 M3 hex nuts. Printed in ABS .015 mm layers... Print instructions You will need to clip the screw cap ends from the wire, strip the insulation from the end of…
Wydruk około 2,46 €–3,01 € nettoWstępna wycena jednego wariantu
I wanted something for my tester to just clean off the lines of all the sockets. My goals were to keep the LED and test-points exposed, but I also wanted the case to be slim rather than the larger clear Perspex one Treedix sell. My…
Wydruk około 0,92 €–1,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update 2nd March 2024: Version 2.0 is now available , based on very useful feedback, thanks all. stl files can be dragged into any slicer for gcode. STEP files and SolidWorks files are provided if you want to add your own holes (for…
Wydruk około 1,06 €–1,30 € nettoWstępna wycena jednego wariantu
über likes makes und follower würde ich mich sehr freuen, Peace MazZe I would be very happy about likes makes and followers, Peace MazZe
Wydruk około 0,84 €–1,03 € nettoWstępna wycena jednego wariantu
I was looking for a smartphone stand with the option to charge the smartphone while in the stand. Since I couldn't find one, I designed my own stand. The current stand is actually the 5th revised version. This version has a hole on the…
Wydruk około 3,42 €–4,19 € nettoWstępna wycena jednego wariantu
I got tired of reaching down to the floor to find my cable everytime i wanted to charge my phone in bed, so i made a cable clip so that it's always attached to my nightstand. Been using it for one month before this upload with no…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
Cable Clip for the Multifunction (Small) Arm mounting system Features Fits on the “ arm-small-hex-honeycomb-wall-compatible ” Fits 4.50mm diameter cables
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Updates since initial upload: Date Description 02/23/2023 Added a USB-A version, to fit 3rd party adapters. The USB-A version is ~2.3mm thicker, and has been tested for the GEEMEE charger. Thanks to Martin Th. for providing me with the…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Differences against original: parts are less robust (as I dont think some parts must be that thick, it holds only headphones..) so I have made some parts thinner (with the same overall dimensions) as a result also desk can be thicker to…
Wydruk około 4,47 €–5,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have designed these easy-to-use cable tidy spools to store a variety of cables in a neat and compact manner. My previous method of using rubber bands and cable clips was still problematic due to the cables tangling and the difficulty in…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
This is a small cable clip that can hold a standard 3.5 mm auxiliary cable, and help keep it tidy. It can be placed on a desk or can hang from the audio device depending on which end you loop twice through it. To use it, snap the cable…
Wydruk około 0,57 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Needed some non-trip cable floor covers. Most coiled rubber covers do not lay flat, and silicone is too soft to protect cables from heavy downwards pressure e.g. electric wheelchairs. ‘Prusament Galaxy Black’ works well to hide dirt from…
Wydruk około 36,10 €–44,12 € nettoWstępna wycena jednego wariantu
A low RJ45 cable guide for 19" racks. It uses less than 1/2 HU and the holes are big enough for bigger plugs. To fix the dovetail better, use 2x M3x18 screws and 2x M3 nut. Some glue might also help.
Wydruk około 5,39 €–6,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wallmount and cable organizer for Tesla's Model 3 Type 2 plug. This is a remix of designs from users turtel89 & MB96 from Thingiverse to add a top piece to hang the cable. Update 21.01.17: Added version without Tesla Logo Print…
Wydruk około 3,51 €–4,29 € nettoWstępna wycena jednego wariantu
Simple desk grommet for a ø60 mm hole, covers ø75 mm in total ø64 mm hole, covers ø79 mm in total, table top thickness 37.5 mm ø73 mm hole, covers ø88 mm in total Lid snaps into insert so it doesn't come loose. If you need another…
Wydruk około 1,37 €–1,67 € nettoWstępna wycena jednego wariantu
I've used to have a lot tangled cables behind my computer, at my router, behind the TV, all of them of different diameters. To unplug one of them or to find out where the other end leads, used to be a nightmare (and a training in…
Wydruk około 0,21 €–0,25 € nettoWstępna wycena jednego wariantu
Made the following adjustments to the original remix: MK4: Added a hole to fix the nylon filament provided with the MK4. Opened up the hole for the cable bundle to provide more space. Cut a bit off the top where the thermistor wire enters…
Wydruk około 0,82 €–1,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I saw that the cable for the print bed always run between the frame and the cross brace. Sooner or later the protective cover and the cable are defect or block the print bed when moving. An energy chain is too long at the back for me, I…
Wydruk około 1,25 €–1,53 € nettoWstępna wycena jednego wariantu
Utilizing a retractable badge holder to keep the cable up and away from the print area.
Wydruk około 0,62 €–0,75 € nettoWstępna wycena jednego wariantu
Headphone holder like the source model, but with a large enough mount to fit on thicker desks. Made to fit on a butcher-block counter slab standing desk conversion.
Wydruk około 5,02 €–6,13 € nettoWstępna wycena jednego wariantu
A set of elegant and simple clips to tidy up and secure your cables. Clips just snap onto your cable housings and hold strongly with a snug fit. “5” Hole is for most brake cables / hoses. “4” Hole is for typical shifter cables. Wall…
Wydruk około 0,61 €–0,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
![Cable Repair and Protect for iPhone and Samsung [lightning+usbc]](https://media.printables.com/media/prints/590112/images/4827822_b916b887-676b-4723-b0c9-90881c40951e_31bb8182-a7ba-4745-adfd-b9d44646baac/195cfe9b-40fc-4570-b695-c540798fc979.jpeg)
