Wyniki wyszukiwania: cafe

Sortowanie

249 modeli

P
PrintablesP-atix

Vespa Cafe Racer

Model Vespa 150 Super (1965) It's not exactly scale model but is optimised for easy print with no supports. It is better to glue the pins, but it is not necessary. Printer setup: Nozzle diameter 0,4 Layer height 0.20mm 10-20% infill No…

Pobrania
1611
Polubienia
247
Ocena
5
P
PrintablesTomas

NESCAFE DOLCE GUSTO CAPSULE HOLDER / SOPORTE PARA CAPSULAS DOLCE GUSTO NESCAFE

Two designs capsule holder for Dolce Gusto Nescafe coffe maker. Both are mobile, you can attach the base to the table with double-sided tape to allow the capsule holder to rotate on its own axis. The expandable design has 10cm height…

Pobrania
88
Polubienia
16
Ocena
0
P
Printablesalberto

Embudo prensa cafetera

Pequeña prensa con embudo para no manchar y desperdiciar café. Para la unión de las dos piezas con un tornillo de m-4 x 16 y tuerca.

Pobrania
46
Polubienia
14
Ocena
0
P
PrintablesMotbrok

Dolce Gusto Capsule Holder (Nescafe)

Modular The cupholder is modular and you can stack the module vertically as high as you want. To have a nice finish there is a top that you can optionally add. Installation The system is not fixated by itself, and is meant to be fixed to…

Pobrania
860
Polubienia
136
Ocena
4,83
P
PrintablesEldar

Nescafe Dolce Gusto Kapselhalter

Coffee capsule holder for the Nescafe Dolce Gusto capsules

Pobrania
821
Polubienia
55
Ocena
4,85
P
PrintablesSigismond0

Ninja Cafe Luxe Portafilter Stand

Simple portafilter stand for the Ninja Care Luxe. Can be used to stabilize the portafilter during tamping, or just as a nice place to rest it when not in use.

Pobrania
816
Polubienia
44
Ocena
5
P
PrintablesPeter Farell

Cafe Racer

Cafe Racer. Fixed for printing.

Pobrania
687
Polubienia
118
Ocena
5
P
PrintablesM3D

Nescafe Dolce Gusto capsule holder

This is my holder for Nescafe Dolce Gustro capsules. I glued it (double-side tape) on side of fridge for saving space in kitchen. Double side tape is strong enough for weight of capsules. I made it from two pieces (Prusa MK3 working space…

Pobrania
594
Polubienia
85
Ocena
5
P
PrintablesOUBRECHT.com

Nescafé Dolce Gusto adaptér na odvápnění | Nescafe Dolce Gusto descaling adapter

Nescafé Dolce Gusto adaptér na odvápnění. Pokud ztratíte originální adaptér na odvápňovávání svého kávoru, tak si můžete vytisknout tento. Nescafé Dolce Gusto descaling adapter. If you lose the original descaling adapter for your coffee…

Pobrania
562
Polubienia
40
Ocena
5
P
Printablessacrilegor

Tamper guide for Cafelat Robot espresso machine

This tamper guide makes your ground coffee flat, so earth can stay round! It is a really tight fit on the tamper, so no screws needed. Print it on PLA or PETG. No support needed! (The inside of the model ends in a cone, so you can print…

Pobrania
470
Polubienia
32
Ocena
5
P
PrintablesJoe

Cafe sign

a cafe sign As with all of my 2D artwork and signs, using a small blob of removable/reusable Sticky Tack will help to keep this stuck to your table/desk/shelf.

Pobrania
400
Polubienia
46
Ocena
0
P
PrintablesWard

Cafe Racer polyester seat

you can print the design in all possible settings, if you want to use it to really mount it on the motorcycle you will have to print it more firmly.

Pobrania
344
Polubienia
22
Ocena
5
P
PrintablesOld Lady

Cafee Coaster

Make your morning happier

Pobrania
322
Polubienia
71
Ocena
0
P
Printablesmadhead

Cafelat Robot Pressure Gauge Mount

A little piece to move the pressure gauge to the head of your Robot. No gauge disassembly needed! The attached STL is for a 8 mm screw with 12 mm head, although the FreeCAD source would allow easy modifications. Some Robots are known to…

Pobrania
322
Polubienia
28
Ocena
4,67
P
Printablesglezmen

Dolce Gusto capsule tray for Nescafe Piccolo XS

All the Dolce Gusto capsule trays I found online have a different shape than mine (Piccolo XS), so I created a faithful copy of the actual tray. The file contains two versions, one has a rim at the top, like the original Dolce Gusto…

Pobrania
308
Polubienia
25
Ocena
0
P
PrintablesCeji3D

Nescafe Dolce Gusto Holder

This is a remix from https://www.thingiverse.com/thing:3445630/files I wanted a capsule holder printable with prusa mk3 :)

Pobrania
306
Polubienia
39
Ocena
5
P
PrintablesTom Interloper

Ninja Luxe Cafe X Bookoo WDT Tamping Station

I wanted to fix an issue I had when trying to use the Bookoo WDT Tool with the Ninja Cafe Luxe portafilter due to its unique dimensions. This project is intended to make a version of the funnel and portafilter holder that will work with…

Pobrania
303
Polubienia
36
Ocena
0
P
PrintablesD3DPrint

Schlumpf Cafe Diorama - Entspannung in Schlumpfhausen

Hier servieren Schlümpfe mit Stil! Diese detailreiche 3D-Druckszene zeigt zwei Schlümpfe in einem liebevoll gestalteten Café-Moment: Einer sitzt entspannt mit verschränkten Armen, während der andere ihm mit einem Lächeln eine dampfende…

Pobrania
240
Polubienia
30
Ocena
0
P
PrintablesLucía Castro

MINIATURA CAFETERA

Cafetera para hacer cocina en miniatura.

Pobrania
236
Polubienia
32
Ocena
0
P
PrintablesNathan

Aventon Abound Abus 4750XL Cafe Lock Bracket

If you enjoy this bracket, please consider making a donation to familybikeride.org. I made this bracket to help families get on an affordable bike that can conveniently haul their family. Please donate what you feel is fair to our group:…

Pobrania
235
Polubienia
3
Ocena
5
P

Ninja Luxe Cafe Pro Portafilter Mount

This is a mount I designed for my Ninja Lux Cafe Pro coffee station since there isn't a good place to store it normally. I originally tried to make it magnet-mountable, but the mini magnets I had were too weak. The features for the mini…

Pobrania
214
Polubienia
17
Ocena
0
P
PrintablesBecker Thorne
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
202
Polubienia
56
Ocena
5
P
PrintablesJoe

A Coffee or Cafe' sign

Two versions available. For the ones with the tab/base, use of a small blob of removable/reusable Sticky Tack will help to keep this stuck to your table/desk/shelf.

Pobrania
202
Polubienia
51
Ocena
0
P
PrintablesJakub

Gear for Miele Cafe Machine CVA 5060

I suggest to print with PLA or Nylon. 0.4 line width 3 perimeters 30% triangle infill Calibrate center hole to Ø4mm Lubricate axle and gear before assembly Simple replace gear in the drive module. Ensure that gear freely rotate on the…

Pobrania
188
Polubienia
15
Ocena
5
P
PrintablesBiny

Capsule holder for Nescafe Dulce Gusto / Nespresso / DeltaQ

Different sizes capsule holder for coffe machines Don't need supports

Pobrania
180
Polubienia
19
Ocena
0
P
PrintablesMaster Yoda

Cafe Racer Motorbike silhouette

I have created this ornamental sculpture of a cafe racer motorcycle entirely from the ground up. You have the flexibility to adjust its size, enlarging it, reducing it, or maintaining it flat, similar to the images I have provided. This…

Pobrania
179
Polubienia
23
Ocena
5
P
PrintablesIswep

Distributeur-de-capsules-de-cafe

EUMAKERS was founded in early 2014 has become a leader in Italy and Europe for the production and marketing of PLA filaments for 3D printing. Actually EUMAKERS can count on the widest range of PLA colors on the market (over 100 tones…

Pobrania
171
Polubienia
24
Ocena
0
P
PrintablesCrab

Cafelat ROBOT: Arms Up

Update: Nov 2026 : I added a 2.7mm thick clip for single arm use; and then two 1.3mm clips for use on both arms. (some like it symmetrical). Use enough walls/perimeters so they are solid. Recommend using PETG for longevity. Note: Each…

Pobrania
168
Polubienia
12
Ocena
4,67
P
PrintablesMrRat

Ninja Luxe Cafe Funnel Shortened

We found that with smaller amounts of grounds the portafilter funnel included with the Ninja Luxe does not let you tamp down as far as needed resulting in a sour cup of espresso. I've therefore created a shorter version that will let you…

Pobrania
165
Polubienia
11
Ocena
0
P
PrintablesNahuel

Moka Coffee Pot / Cafetera Italiana

[English] This is a design I made out of boredom. It's based (aesthetically) on a Volturno moka coffee pot from Argentina. It's not exactly to scale, and I took a lot of liberties because I wanted to make it really small and fully…

Pobrania
164
Polubienia
48
Ocena
4,5
P
PrintablesMelt3d

Accesorio de limpieza para cafetera Dolce Gusto

Tras desafortunadamente romper la pieza original, y necesitando limpiar la cafetera, me puse manos a la obra. Teniendo como base una capsula de café, la pieza original rota, y utilizando un calibre y Fusion360, diseñe la copia, tomando…

Pobrania
157
Polubienia
16
Ocena
5

Geometric Cafe Racer motorcycle - model 3

Happy printing! Printing settings: Nozzle diameter: 0.4 mm Layer height: 0.25 mm Perimeters: 3 Top and bottom solid layers: 4

Pobrania
150
Polubienia
29
Ocena
5
P

Hardrock Cafe Drum Sticks stand

As a drummer it is almost a must to collect Hardrock Cafe Drumsticks from every city where you have been. So I created a nice stand for these

Pobrania
148
Polubienia
24
Ocena
4

Cup of Coffee - Taza de cafe

Practice 3d modeling for print.

Pobrania
141
Polubienia
3
Ocena
0
P
PrintablesNicki

Hard Rock Cafe

Hard Rock und Hard Rock Cafe kann in 2 Farben mit Filamentwechsel gedruckt werden. Dabei sind die Schichten jeweils 2 mm und das Objekt insgesamt 4 mm.

Pobrania
140
Polubienia
9
Ocena
0
P
PrintablesRepa

Cafelat Robot mitten round

Printing worked the best with the threads upwards.

Pobrania
138
Polubienia
6
Ocena
5
P
PrintablesDavid

curtain bracket ,Cafehausstange-, Gardinenstange-, Bistrogardine- Halterung D12mm (11,6mm)

Simple bracket for a curtain rod that can be glued or screwed in place. If you need different sizes or distances, just let me know. See: https://www.kaufland.de/product/315528404/ or: https://www.bestlivings.de/Cafehausstangen

Pobrania
134
Polubienia
9
Ocena
0
P
PrintablesSteven

Breville Cafe Roma replacement knob

An easy to print and assemble replacement knob for the Breville Cafe Roma espresso machine. The original knob is notorious for breaking off (thin plastic) and Breville just would not send us a replacement part, even if we offered to pay.…

Pobrania
133
Polubienia
2
Ocena
5
P
PrintablesWheresWaldo

Ninja Luxe Cafe IMS Basket Spacer

Want to use 54 mm IMS baskets with your Ninja Luxe Cafe Espresso maker. This first version of the spacer model works by sliding it up onto the replacement basket and then placing either a single 5 mm x 4 mm neodymium magnet on the left…

Pobrania
129
Polubienia
15
Ocena
5
P
PrintablesTech4You

Nescafe capsule holder

Simple capsule holder for Nescafe.

Pobrania
129
Polubienia
19
Ocena
4,5
P
Printablesslapjack

3d Printable Toretto's market & cafe sign

I don't own a normal printer, so I tried to make a 3d printable version of the sign. Original font was too little and thin for it to be 3d printed so I redesigned the whole thing from the ground up. Make sure to do a color change from…

Pobrania
127
Polubienia
8
Ocena
0
P
Printableswhoitwouldbe

Breville ESP8XL Cafe Roma Dosing Funnel

A simple dosing funnel for use with the Breville ESP8XL Cafe Roma 51mm portafilter. The outer ring of this model fits around the portafilter locking tabs to center it so I am unsure how universal this model will be with other 51mm…

Pobrania
127
Polubienia
13
Ocena
5
P
PrintablesPetr Novacek

Rick and Morty - Cafe Sanchez logo

Cafe Sanchez logo, from Rick and Morty Print instructions Category: Signs & Logos

Pobrania
123
Polubienia
12
Ocena
0
P
PrintablesCrab

Espresso Maker Cafelat Robot Mittens

See V2 for most recent version of this The Cafelat Robot is a great manual espresso maker. Some complain that the stark metal ends are hard on the hands when pulling down with 9 bars of pressure. Robot “Mittens” have been one accessory…

Pobrania
122
Polubienia
4
Ocena
0
P
PrintablesTTGeek

Dispenser for Nescafe 2018 glass bottle

If your hands are shaking, this will help you out. See https://www.youtube.com/watch?v=tqcsF8uFTTg for a demo of how it works and how to assemble it. Obs, the video show the old bottle, not the new one. See the images for the bottle that…

Pobrania
121
Polubienia
17
Ocena
0
P
Printablesmadmaxx890

Umikot stand for Cafelat Robot

The stock 58mm Umikot works well with the Cafelat Robot - all except the stand. The Robot's deep basket requires longer needles than a typical portafilter basket. This deeper stand will allow you to store the Umikot with those longer…

Pobrania
119
Polubienia
11
Ocena
5
P
Printablesthrow ryuken

Ninja luxe cafe portafilter scraper

Portafilter Scraper for Ninja Luxe Café This custom-designed portafilter scraper is engineered specifically for the Ninja Luxe Café espresso machine. It features a durable, ergonomic form that fits securely into the machine’s portafilter…

Pobrania
118
Polubienia
14
Ocena
0
P
Printablesnotaseraf

Cafelat Robot Scale Pad with Shot Mirror Mount

A scale pad for Cafelat Robot with a place to mount a shot mirror. I used this: https://www.amazon.com/gp/product/B09YRJH57H/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 but anything with a base diameter 35mm or less would fit just…

Pobrania
114
Polubienia
8
Ocena
5
P
PrintablesDaniSC

Tamper 51mm Cecotec Cafelizzia

Tamper de 51 mm. Diseñado en Fusion 360. Relleno: 20% Altura de capa: 0.02 Material: PLA

Pobrania
112
Polubienia
8
Ocena
0
P
Printableskeks

heat plate stand for Cafelat Robot

This is a stand for the G3061 PD65W heat plate (the white thing in the middle) for using it with the Cafelat Robot. It securely holds the heat plate under the piston and has a opening on the bottom to store the heat plate when not in use.…

Pobrania
107
Polubienia
6
Ocena
0
P
PrintablesGweeto Mods

Ninja Luxe Cafe Premier Series Portafilter holder

By not inserting the empty portafilter into the machine I believe it saves the rubber gasket from wear. Also the handle sticks out a bit and that saves room on my counter. I designed it to press fit in to the lid for the water. It doesn't…

Pobrania
107
Polubienia
12
Ocena
0

Kirby inspired, Cafe-Staff Waddle Dee, Tabletop DnD miniature

IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles Kirby inspired, Cafe-Staff Waddle Dee, Tabletop DnD miniature 25 mm medium base which can be used for DnD and other…

Pobrania
106
Polubienia
16
Ocena
0
P
PrintablesLarry

Cafelat Robot Portafilter Handle

The stock Robot portafilter handle is chromed metal without much heft. This design pads it out a bit and makes it easier to hold. The top has a slight indention for your thumb. My original design for this was held together with tiny…

Pobrania
105
Polubienia
9
Ocena
0
P
PrintablesSantiago

Leveling Tamping Tool for Cafelat Robot

This is a leveling tool to be used with the original tamper of Cafelat Robot espresso machine. I've measured my tamper and the handle diameter is 26.3mm. I believe all tampers have the same dimensions, but you can check yours to make…

Pobrania
103
Polubienia
2
Ocena
0
P
PrintablesLarry

Cafelat Robot Magnetic Arm Latch

While using the Cafelat Robot there are times when you'd like the arms to stay in the up position without needing to use a hand. This design does this while staying relatively unobtrusive and small. These were printed in PETG as a bit of…

Pobrania
103
Polubienia
6
Ocena
0
P
PrintablesJura Švébiš

morning cafe

morning cafe

Pobrania
101
Polubienia
21
Ocena
5

Pokemon Cafe ReMix inspired, Sudowoodo, Tabletop DnD miniature

IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon Cafe ReMix inspired, Sudowodoo, Tabletop DnD miniature with or without 25 mm medium base which can be used…

Pobrania
99
Polubienia
17
Ocena
0
P
Printablesalaso13

Soporte Plegable para Cafetera Portátil Outin

¿Tienes una cafetera portátil Outin y te encanta llevarla contigo allá donde vayas? Este soporte 3D ha sido diseñado especialmente para ti: ligero, funcional y plegable , ideal para los amantes del café que valoran tanto la practicidad…

Pobrania
98
Polubienia
10
Ocena
5
P
PrintablesCrab

Cafelat Robot Mitten V2

This is an upgrade to my older ‘mittens’ for the Cafelat manual espresso machine “Robot”. The original version used snaps that tended to come apart, over time, when 9 bar of pressure was applied to the handles. This version of the mittens…

Pobrania
97
Polubienia
4
Ocena
0
P
PrintablesTnirpD3

BMW Cafe Racer

BMW motor old school

Pobrania
97
Polubienia
9
Ocena
0
P

menu restaurant/cafe holder

menu holder max (16cm wide) with salt and pepper, sugar or other organiser. i designed this menu holder for my workplace. me and my customers love it you can personalise with your brand logo or drop me a text and i can try to write for…

Pobrania
93
Polubienia
11
Ocena
0
P
PrintablesW1nter

Cafe wall art

Cafe wall art na stěnu nebo poličku

Pobrania
91
Polubienia
13
Ocena
0
P
Printablesprintythings

Book Nook (Cafe' Scene)

Will print without any support. Optional front fascia will need to be glued on.

Pobrania
88
Polubienia
45
Ocena
0
P
Printablesbabalunda

Menu letter board for cafes, offices and homes, on wall or desk

I want to share with you about my new 3D-printed letter rails that you can use for making menus and signs at small cafés. It comes with entire alphabet, so is very easy to create words or phrases you want. I like that I can change the…

Pobrania
87
Polubienia
15
Ocena
0
P
PrintablesDAMorganWilkins

WDT Tool Parts for Cafelat Robot

This is a resized lower body component for the spirographic WDT tool, making the tool compatible with the portafilter on the Cafelat Robot. You need to print all components from the original design, except the lower body, and follow the…

Pobrania
87
Polubienia
6
Ocena
0
P
PrintablesF2-Beamer

Cafe Cup

Kaffee Tasse aus PETG Print Settings Rafts: No Supports: No Resolution: 100 Infill: 40 Filament: SUNLU PETG

Pobrania
86
Polubienia
5
Ocena
0
P
PrintablesJuan Agustin

Llavero tipo greca o cafetera

Llavero tipo greca o cafetera

Pobrania
86
Polubienia
2
Ocena
0
P
PrintablesTeo_211

BMW K1100 Cafe Racer Wall Art

BMW K1100 Cafe Racer Wall Art Silhouette model. Adjustable size. I accept model suggestions.

Pobrania
84
Polubienia
14
Ocena
5
P
Printablesmkrz

simple TPU lid for Red Bull can (EU 250ml), also for Nescafe cans etc.

It's a simple design but it works - it fits very good. Print with TPU, slow speed, infill 15%. If you want, you can also print the lid downscaled to 99% (all axes) to make it more tight - it's about 0,5mm less in diameter = 0,25mm radius…

Pobrania
83
Polubienia
3
Ocena
0
P
PrintablesSigismond0

Cafelat Robot Arm Lock

I liked the idea of an “arms up” print, but didn't want to have to deal with buying magnets, dialing in tension, or a part that I have to take in and out. My solution fits in the “armpit” gap. Raise the arms and slide back to lock them…

Pobrania
82
Polubienia
8
Ocena
5
P
PrintablesAlnomis

DF64 Bracket for Cafelat Robot Portafilter Basket (V2)

V02 - Updated the angle for the screw hole to make it 90° with the angle of the grinder, and made the bracket a bit longer to compensate with the new angle. - A simple bracket for the DF64 grinder to grind the coffee beans directly into…

Pobrania
82
Polubienia
7
Ocena
3
P
Printables3D LEE

Cafe board game 3D insert and custom action marker

Cafe board game 3D insert and custom action marker It doesn't hold sleeved cards. Just a simple print and shouldn't require any supports EDIT: Added a sleeved version. Based on sleeved cards 83x123mm. The room for the cards should be 85mm…

Pobrania
79
Polubienia
10
Ocena
5
P
Printablesakmiller01

Roost Cafe Coasters - Animal Crossing

A coaster set featuring Brewster's logo from Animal Crossing Roost Cafe. The embossed version is one file and straight forward to print. The multicolor version is designed to print with Z Hop enabled. If you want to slice your own…

Pobrania
73
Polubienia
41
Ocena
0
P
Printablespjtrone

True Umikot 58mm Base with tabs for Cafelat Robot

I created this because I disagree with the other Robot builds that suggest downsizing the 58mm Umikot to 94%, I want my as much of my bed as possible whisked. To this end, build the standard 58mm Umikot at 100%, and print this, it will…

Pobrania
72
Polubienia
6
Ocena
5
P
PrintablesPatrick S

Nescafe Vertuo capsule storage

This design allows you to easily store multiple coffee capsules (Nescafe Vertuo). Each insert can be pushed out and stores 7 capsules (size: Mug 230ml). The parts on the images was printed using following parameters: Color: Prusament PLA…

Pobrania
70
Polubienia
14
Ocena
0

Molinillo de cafe manual

El molinillo de café manual es un dispositivo diseñado para ofrecer precisión y control en la molienda de granos de café. Su estructura compacta y ergonómica facilita su uso en cualquier lugar, mientras que su sistema ajustable permite…

Pobrania
69
Polubienia
7
Ocena
0
P
PrintablesYogourt

Cafe - Boardgame insert

A small insert for the small box of the Cafe Boardgame. Easy to remove from box and put on table. Coffee beans tokens sorted by colour. Printed in PLA without support.

Pobrania
68
Polubienia
10
Ocena
5
P
Printablesmadmaxx890

Cafelat Robot Bookoo Scale inset base

Cafelat Robot base with inset for the BOOKOO Themis mini coffee scale. Allows the scale to sit flush with the top of the base. Bottom holes allow for drainage or more easily removing the scale. Updated V2 model includes a notch in the…

Pobrania
65
Polubienia
6
Ocena
4
P
PrintablesBoluge

Cafec Deep 27 Filter Shaper

☕ Enhance your brewing experience with this 3D-printed mold designed to give your Cafec Deep 27 coffee filter the perfect shape . Its precise design ensures an ideal fit in the dripper, prevent folds and bypasses to ensure even…

Pobrania
63
Polubienia
10
Ocena
0
P
PrintablesD2mian

Cafelat Robot Basked Grinder Adapter JX PRO

This adapter screws into a 1Zpresso JX Pro grinder and allows you to slide in the Cafelat Robot basket and grind directly into it. Project from : https://www.thingiverse.com/thing:4840975

Pobrania
60
Polubienia
4
Ocena
0
P
PrintablesSigismond0

Cafelat Robot Deluxe Portafilter Handle

Uses 3x M3x10mm (screws and heat-set inserts. Slot has a little extra clearance in it, which allows you to get a perfect fit by melting a little blob of filament or hot glue into the gap. Perfectly snug with no rattle, no reliance on…

Pobrania
58
Polubienia
6
Ocena
5

Mr. Coffee Cafe Barista Espresso Portafilter Holder

A little while after getting my espresso maker the little clamp that held the filter from falling out while dumping the grounds failed. I designed this and printed it in PETG with supports at 90% infill to maximum strength.

Pobrania
58
Polubienia
11
Ocena
5
P
PrintablesSantiago

Cafelat Robot Pressure Gauge Holder

This is a tiny part for Cafelat Robot espresso machine. It is used to move the original pressure gauge from the robot arms (which is visible from the front) to the top of the machine, so user can see the pressure from above the machine.…

Pobrania
56
Polubienia
1
Ocena
0
P
Printablesrad2905

Nescafe DolceGusto capsule holder (rotating)

DolceGusto capsule holder. It rotates :) You need a lot of superglue, so when putting together the sprocket and U-shaped holders, I recommend putting the holders and the sprocket together, wrapping them with a rubber band, and then, one…

Pobrania
55
Polubienia
11
Ocena
4
P
PrintablesRepa

Cafelat Robot Arms Up Shoulder Clip by JohnMichaelHauck

This is an accessory for the Cafelat Robot Espresso Maker. It is used to hold the arms up when attaching the portafilter: Here is a link to the Cafelat Robot Espresso Maker: https://www.cafelatstore.com/products/robotpowdercoating The CAD…

Pobrania
54
Polubienia
4
Ocena
0
P
PrintablesD2mian

Cafelat Robot Arm Stopper

Something to keep those arms from dropping. Designed just enough so you can raise the arms a bit and remove the print, while raised enough to attach the basket without any friction. Print Settings Infill: 15% Filament material: PETG…

Pobrania
54
Polubienia
1
Ocena
0
P
Printablesfloano

Nescafe Logo

Nescafe logo. Perfect for “engraving” into other models.

Pobrania
53
Polubienia
4
Ocena
0
P
Printables3DBorx90

Tapa Tanque Agua Cafetera l'Or

Se trata de la tapa del tanque de agua para la maquina de cafe automatizada de la marca L'Or. No es necesario imprimirlo con soporte. Se coloca en tu laminador con el perfil que tengas y listo

Pobrania
53
Polubienia
3
Ocena
0
P
PrintablesMakerDeMadrid

Mango de cafetera italiana / moka

Mango para cafetera italiana / moka grande de 9/12 tazas. 5mm de grosor en el encaje x 11cm de largo x 5cm de ancho Puedes imprimirlo en ASA // ABS No imprimir en PLA o PETG normal, ya que no aguantan el calor y se derrite En tu cortador…

Pobrania
52
Polubienia
5
Ocena
0
P
PrintablesHatsuseno Rin

YKK Cafe Alpha Sign

Cafe Alpha's sign in Japanese manga ヨコハマ買い出し紀行 (Yokohama Kaidashi Kikou). 3D model is created based on Hitoshi Ashinano's manga illustrations. The easiest way to print is to pause and change filament after the bottom layers are done. I…

Pobrania
52
Polubienia
3
Ocena
5
P
PrintablesFengshie

Nescafe Gold 47.5g cap

Nescafe Gold 47.5g cap.

Pobrania
52
Polubienia
6
Ocena
0
P
PrintablesVentisca

Cafetaria / Snackbar 1:87 H0 scale

Description This is an old cafetaria that once stood near the railway station in the Dutch city of Enschede. All parts are printed with 0.4mm nozzle and 0.20mm layers. I printed the parts in the following batches: Batch 1 - Floor and…

Pobrania
49
Polubienia
9
Ocena
0
P
PrintablesKyle Polich

Umikot 58mm Stand for Cafelat Robot

Full load of files below for a one stop shop to print everything needed for the Umikot 58mm for Cafelat Robot bundle. The files attached are for the Umikot 58mm - Upper (30mm needle handles)

Pobrania
48
Polubienia
2
Ocena
0
P
PrintablesProjunk

Cafe Racer

Cafe Racer. Building instructions: https://www.toysperiod.com/lego-set-reference/technic/model/riding-cycle/lego-8810-alpha-racer/ As Headlight can be used: TileRound_2x2.stl or PlateRoundWithAxleHole_2x2.stl + Dish.stl As Tire can be…

Pobrania
48
Polubienia
9
Ocena
0

Cafe racer front fender

I designed this front fender for my 1977 Yamaha XS750 cafe racer, this fender might fit other bikes to. Measurements I designed this fender for: Distance from front axle to front fender bolt holes ±220mm Distance between front fender bolt…

Pobrania
45
Polubienia
12
Ocena
0
P
PrintablesPotter77

NESCAFE' DOLCEGUSTO POD DRAWER

0.20mm x 10 loop wall x 100% infill

Pobrania
45
Polubienia
2
Ocena
0
P
Printableskeks

Cafelat Robot base

An alternative to the original base plate of the Cafelat Robot with the following changes: - flatter center profile for increased filter basket and scale clearance - leveled bottom surface for accurate scale readings - flush-mounted base…

Pobrania
44
Polubienia
3
Ocena
0
P
PrintablesCrOwN

Prensa Cafetera

Prensa para compactar el cafe de la cafetera

Pobrania
44
Polubienia
7
Ocena
5
P
PrintablesWilly Ray

Replacement Knobs for 2010's GE Cafe Range

Knocked together these replacement knobs for the gas range. The old ones were designed to fail… thinnest material at the most load-bearing spots. These aren't exact duplicates for the look of the knobs, but they're solid where they…

Pobrania
41
Polubienia
5
Ocena
0