Ikea carafe lid
Recommended settings: Layer height: 0.3 mm Supports: No Nozzle size: 0.6 mm Infill: 15% Materials: PETG or PLA Brim: None Printbed: textured Enjoy printing!
- Pobrania
- 40
- Polubienia
- 5
- Ocena
- 5
61 modeli
Recommended settings: Layer height: 0.3 mm Supports: No Nozzle size: 0.6 mm Infill: 15% Materials: PETG or PLA Brim: None Printbed: textured Enjoy printing!
This beautiful model can be printed in any material, and there is no requirements for the slicer settings, so just get going! There are 2 different models, one with straight sides and one with curved. Happy Printing!! and don't forget to…
Easy one-handed pouring from your 2-liter bottle with this carafe-style screw top and handle. Use it for serving or as a watering jug for plants. The wide mouth also makes it easy to refill. Prints upside-down without supports. Fits…
This is a thermal carafe for 1:12 dollhouse scale. This is not based on a particular design or model, it's pretty generic. While not intended to be functional, the lid screws on, the spout does have a hole that runs through, but the…
The sturdy, stylish drip holder for glass carafes (Sodasystream Crystal) and plastic bottles brings order to your kitchen! The design makes it easy to put the glass carafes and lids in the holder. Der robuste stylische Abtropfhalter für…
Une simple carafe à eau (ou autre). Je l'ai dessinée solide afin de résister aux éventuelles chûtes. Imprimée en PETG avec le profil 0.3mm de PrusaSlicer, sans supports et est parfaitement étanche. A simple water carafe (or other). I…
Our carafe lid started leaking when tipped, this was most likely due to a toddler dropping the lid multiple times… happens. This print replaces the lever inside, just take off the covering, pull out the old one, struggle to get the seal…
A small charm with a loop for mounting. Best printed using resin in batches. There is usually a little spoilage in removal when you print this small. Use 1 or maybe 2 sprues per piece. Disclaimer: Please refer to the manufacturer of your…
I just wanted to clean up some older stuff. But then I wasn't quite satisfied with the handle and I made what felt like a 20 different version. For me, this is a good compromise between appearance and surface quality.The last extension…
This is an attempt at making a dripper with replaceable bases to allow the use of different carafes and cups sizes and shapes. Please read up on food-safe 3D printing and food-safe filaments and sealants! Your morning cup of Joe shouldn't…
Ikea Bottle Cap Carafe 1L Recommended material : Flexible/TPU Post your makes!
The original IKEA 365+ Carafe 1L came with a cork cap. This looks great but when you want to include fruit or ice in your carafe you have to pour gently to not get any of that in your glass. This cap prevents bigger chunks from getting in…
I printed this for my Carafe that I got at a flea market. No lid so I designed my own. It works fine but NOT A TIGHT FIT, just a lid so I can store it in the fridge. Print with handle up. 1 hour & 40 minutes print.
voici une belle carafe ricard faite vous plaisir hahaha pour un été agréable entre pote
The Hoop is notoriously difficult to fit on anything. This was purpose-built for the Hario 03 size glass Carafe but I think it will likely work for most carafes. Please let me know what specific models it does and does not work for for…
I've used the base profile of original model and redesigned the cup to use while carafe is attached.
Coaster for a water carafe with a diameter of 11.5cm. The .gcode has two color changes.
These are designed for TPU flex There are two sizes of carafe lids provide based on the ones I own. There are two styles here. Both Generated with the TPU can lid generator : Angled Edge Square Edge You can make your own using the TPU can…
This is a stable dryer for my carafe, for example. The big one of the picture. I designed it in three parts to avoid large amonts of support, and printed the three identical pieces of the middle section upright with rims. The different…
After buying a Moccamaster KBT I realized sometimes I don't need to brew a full pot and wanted the option to use another carafe, like a large insulated thermos to brew into. The piece fits right in and presses the white button the carafe…
Retention for ice cubes. Fits on the 1l VARDAGEN carafe from IKEA. Can also be adapted to other sizes. Holds back the ice cubs Eiswürfelrückhalter für die IKEA VARDAGEN Karaffe (1l). Hint: Make sure to have >1.2 mm bottom/lid so it is…
Due to the decreasing diameter towards the bottom of the SodaStream bottle https://sodastream.com/products/glass-carafe it tends to tilt over, for example when you have them stored in the fridge door and you open or close too quickly.…
This carafe shaped vase can be scaled up to use as a carafe. The concave sides provide some grip.
I needed elastic lids for the many carafes we use to prepare our black teas. The original plastic lids for these carafes had long since cracked. Fired up Tinkercad and came up with this design. These work great as we use on a daily basis.…
Diameter is 30mm on the bottom and 36mm at its largest. Model can easily be tweaked to your needs using the scale tool in your slicer software. Have fun and please share your makes !
This is a simple stopper for carafes like this one from Rosendahl. Printed with 15% infill. Measurements (can be scaled in your slicer software): Bottom diameter 5,8cm top diameter 7,9cm height 4cm Use the rounded version if you prefer…
The Hario Dripper Size 03 (VDR-03T V60 03, Amazon_DE ) doesnt fit the Hario glass carafe with size 02 (VDD-02B VD, Amazon_DE ). This is an Adapter to use the beautiful carafe with the bigger dripper. Heatproof Materials recommended, but i…
Possibility of gluing 5x M8 nuts to make the stand heavier. Optional TPU-printed protective sleeve.
A simple "protector" for using the ceramic V60 directly on the cup/mug. I printed it using TPU, just for that extra softness but it should work well with any filament.
Just a simple Vase or Carafe. It depends on how you want to use it. You have to print in vase mode. If you want to use it as a carafe, I would suggest PCTG or something that is food-safe.
I was getting annoyed that the carafe was so hot trying to pour my coffee into my mug, so I designed a handle for it.
Replacement Moccamaster KBGT carafe plate. This model features (x2) cutouts for 2x6mm magnets for various mounts.
A replacement lid for the IKEA 365+ water bottle, designed as a drop-in fit for the original cap. Perfect if yours got lost, cracked, or worn out over time. Designed to match the standard IKEA 365+ bottle head. Note: it’s nearly…
wine carafe drainer with grooves designed for the ikea carafe on the photo, might need scale adjustments for your carafe printed in PLA, no supports
I dropped my carafe and broke the plastic lid off. This replacement fits perfectly and the hinge part works like factory
Cut out a coffee bag label to mark what's inside the coffee for event. Then take the cutout and put it on your Fellow Atmos for the rest of the beans: https://www.printables.com/model/235324-fellow-atmos-label-holder Use this template to…
This nice little adapter ring should fit into the opening of various thermal carafes. It makes it easier to use larger pour-over style coffee cones. In particular, this older 6-cup Melitta cone. The adapter never touches your coffee, so…
I designed these for use when my family is hosting parties or other gatherings, since we often put out coffee and hot water for tea for our guests. In the past we used sticky notes, but I wanted a more durable and visually appealing…
I use the Mighty Small Glass Carafe with an Aeropress most days. I made this coaster to provide a softer base than granite countertops when aeropressing — and it works great as a base for the carafe in general. Needs to be printed in…
rubber stopper not made. you may be able to print that in TPU. Mine works with just PLA but you may need to print in PETG or ASA if it gets too hot and melts
Water Tribe Coaster for Water Carafes Bring the spirit of the Water Tribe to your table with this elegant coaster. Featuring the iconic Water Tribe emblem from Avatar: The Last Airbender , it’s the perfect blend of fandom and function.…
Problem: I make cold brew and strain through a paper filter using the filter basket from Bonavita 5-Cup coffee maker(BV1500TS) and store in an Ikea Vardagen Carafe. I would have to filter into the Bonavita Carafe and then pour into the…
A chiller to allow you to leave the carafe out for a while without the milk going bad. This is designed specifically for the Philips/Saeco Xelsis carafe (https://espresso-experts.com/products/xelsis-milk-carafe). So far I have been able…
DeLonghi LatteCrema Milk Carafe Wall Mount / Holder I designed this custom wall mount for the DeLonghi LatteCrema (Hot/Cool) milk system. If you’re like me and want to keep your countertops clean while the milk carafe is not in use, this…
My first own 3D-model. Replacement of an broken closure for a glass carafe. Total height: 61mm Height of mid: 11mm Top-diameter: 56mm Bottom-diameter: 25.5mm Mid-diameter 48mm - 25.5mm
This is a replacement part for the lever that pushes the baffle inside the lid of a restaurant style coffee dispenser. This is similar to this models:…
Just upgraded to a De'Longhi Rivelia, and wanted to be able to have a dedicated place to store it. Didn't fit on our fridge door, mostly due to mustard/mayo/hot sauce inventory levels. These clamps slide on to my size fridge shelf, and we…
Carafe to replace the glass one that comes with a Presto Dorothy cold brew coffee system.
Print this model with supports enabled. I've printed it upright with a 0.6mm nozzle. It might print upside down, too, After removing the supports, you can place the holder on the dish drainer and turn it 90 degrees (Z) to secure it…
voici un sèche carafe avec deux diamètres selon la carafe Imprimé en Pla Noire de Roza en 0.2 et remplissage à 15%
I printed this model in Fiberlogy Mattflex 40D on blue tape. It has a nice snap fit to the carafe, but it needs to be printed out of a flexible filament. The model accounts for a shrinkage of approximately 0.8%.
Bouchon pour carafe ikea en remplacement du bouchon liège Ikea carafe stopper to replace the cork stopper Imprimer en PLA ,
I originally designed this for TPU, but ended up printing it in PETG HF with excellent results. 0.16mm layers with 3 walls and 5% gyroid infill. The sleeve features internal relief ribs that provide a smooth sliding fit and reducing…
A simple holder for a carafe while it is drying after use. Any residual water is collected.
A chiller to allow you to leave the carafe out for a while without the milk going bad. This is designed specifically for the Philips/Saeco Xelsis carafe (https://espresso-experts.com/products/xelsis-milk-carafe). So far I have been able…
Replacement Moccamaster KBGT carafe plate. This model features (x2) cutouts for 2x6mm magnets for various mounts.
The Hoop is notoriously difficult to fit on anything. This was purpose-built for the Hario 03 size glass Carafe but I think it will likely work for most carafes. Please let me know what specific models it does and does not work for for…
DeLonghi LatteCrema Milk Carafe Wall Mount / Holder I designed this custom wall mount for the DeLonghi LatteCrema (Hot/Cool) milk system. If you’re like me and want to keep your countertops clean while the milk carafe is not in use, this…
Just upgraded to a De'Longhi Rivelia, and wanted to be able to have a dedicated place to store it. Didn't fit on our fridge door, mostly due to mustard/mayo/hot sauce inventory levels. These clamps slide on to my size fridge shelf, and we…
Our carafe lid started leaking when tipped, this was most likely due to a toddler dropping the lid multiple times… happens. This print replaces the lever inside, just take off the covering, pull out the old one, struggle to get the seal…
This is a simple stopper for carafes like this one from Rosendahl. Printed with 15% infill. Measurements (can be scaled in your slicer software): Bottom diameter 5,8cm top diameter 7,9cm height 4cm Use the rounded version if you prefer…