P
PrintablesB0urne
12mm CW to 14 CCW threaded airsoft adapter
A 12mm CW to 14 CCW threaded adapter for fitting a tracer unit or mock suppressor on an airsoft gun.
- Pobrania
- 804
- Polubienia
- 72
- Ocena
- 5
Wyniki wyszukiwania: ccw
104 modeli
P
PrintablesMatthew 144
Pointy flash hider 14mm CCW for airsoft
flash hider for airsoft https://www.printables.com/model/578627-fgc-6-fgc-9-mkii-stingray-flash-hider-14mm-ccw-for
- Pobrania
- 39
- Polubienia
- 3
- Ocena
- 0
P
PrintablesRecticle
Airsoft Suppressor SOCOM 2 Series 14x1 CCW
Surefire SOCOM 2 Series (14x1 CCW) made in Fusion 360 This is not an “exact” replica of the Surefire SOCOM Series, I found a few on thingiverse but they don't print very nice, and need support. So I decided to make one myself (for airsoft…
- Pobrania
- 3895
- Polubienia
- 427
- Ocena
- 4,86
P
PrintablesGodlikeOne
Mock Suppressor For Airsoft - 14MM Counter-Clockwise (CCW) Threads - Fits xCortech Tracer
I couldn't find a suitable free tracer housing for my Airsoft guns so I designed my own. It fits an xcortech tracer down the end, so you can have extra barrel length inside the suppressor if needed. I added some electrical tape around the…
- Pobrania
- 1083
- Polubienia
- 97
- Ocena
- 3,67
P
Printablesmilspecmoehring
Airsoft Glock Compensator for 14mm CCW
Airsoft Muzzle device for Glock Models with a Threaded Barrel. Attaches via M14x1 LH threads. This Print consists of two parts. A threaded insert which goes onto the threaded portion of the outer barrel and the comp itself which simply…
- Pobrania
- 758
- Polubienia
- 113
- Ocena
- 0
P
Printablesmilspecmoehring
Barrett Style Muzzle Brake for 14mm CCW
Airsoft muzzle brake inspired by the distinctive muzzle device used on the infamous Barrett anti-material rifles. Attaches via M14LH threads. Print Settings i used: Printer: Prusa MK3S+ Prusament PLA 100% Infill 0.1mm Layer Height…
- Pobrania
- 675
- Polubienia
- 67
- Ocena
- 4,5
P
PrintablesUntangleWORKS
FGC-6: Sound Amplifier for 14mm CCW for airsoft
this is modeled so it can be threaded on the 14mm CCW barrels tips of airsoft replicas and the FGC-6 14mm CCW outer barrels. there is the normal version and a FGC6 version this will give a bit more sport by sliding a bit over the barrel.…
- Pobrania
- 594
- Polubienia
- 81
- Ocena
- 4,33
P
PrintablesUntangleWORKS
FGC-6: FGC-9 MKII Stingray flash hider 14mm CCW for airsoft
this flash hider design is from the designer Hotsauce, that is made for the FGC-9 MKII Stingray edition. that is modded so it can be threaded on the 14mm CCW barrels tips of airsoft replicas and the FGC-6 14mm CCW outer barrels.
- Pobrania
- 527
- Polubienia
- 57
- Ocena
- 4,67
P
PrintablesTiten
24MM RH/CW to 14MM LF/CCW for airsoft AK's
Print slow and with supports, high infill/multiple perimeters for strength.
- Pobrania
- 525
- Polubienia
- 26
- Ocena
- 0
P
PrintablesCitruspers
MP7 12mmcw to 14mmccw adapter (airsoft)
A simple adapter to mount common 14mm CCW parts on your 12mmcw MP7 AEG barrel
- Pobrania
- 501
- Polubienia
- 40
- Ocena
- 0
P
PrintablesUntangleWORKS
FGC-6: thread protector for 14mm CCW for airsoft
this is modeled so it can be threaded on the 14mm CCW barrels tips of airsoft replicas and the FGC-6 14mm CCW outer barrels. print settings: 0.2 layer hight should be fine. you can use the 8 layer walls and a 40% infill. but personally I…
- Pobrania
- 494
- Polubienia
- 46
- Ocena
- 0
P
PrintablesEdan farr
Honeycomb 14MM CCW thread Airsoft suppressor
Hey all, Made this Suppressor while I had some down time and had nothing to do. Fits a 14MM Counter Clockwise thread that is common on most Airsoft rifles. Made this for my G&G combat machine. Adds about 155mm of extra outer barrel length…
- Pobrania
- 465
- Polubienia
- 49
- Ocena
- 5
P
Printablestachanka71
Mock Suppressor for Airsoft-14mm CCW Threads
print with brim for better adhesion
- Pobrania
- 418
- Polubienia
- 26
- Ocena
- 5
P
PrintablesTommmy47
Airsoft Adapter 12mm CW to 14mm CCW
I'm re-designing it because I needed a 14mm CCW inside.
- Pobrania
- 359
- Polubienia
- 22
- Ocena
- 0
P
PrintablesFaceHaver
Prop Bottle Silencer adaptor - PCO1881 to 14mm CCW / 1/2-20 UNF thread
Little part to fit a plastic bottle to an airsoft gun or airgun - files threaded for the standard airsoft M14 x 1.0 LH ("14mm CCW") fitting and airgun 1/2-20 UNF standard are included. This is to make a prop. While a big bottle has a…
- Pobrania
- 325
- Polubienia
- 38
- Ocena
- 5
P
PrintablesMatyas2603
Cyma Glock 18C Tac Rail and 14mm CCW Barrel
Cyma Glock 18C Tac Rail and 14mm CCW Barrel
- Pobrania
- 319
- Polubienia
- 52
- Ocena
- 5
P
PrintablesSchumo
Mini Wheels - CCW Classic
I recreated some classic (JDM-)wheels. They're approximately 1:3 scale and have an diameter of around 13.5cm and a width of around 9cm. They're not a perfect copy as I drew them just after some pictures from the internet. Print them as…
- Pobrania
- 309
- Polubienia
- 49
- Ocena
- 5
P
Printablesmladendeni
Airsoft 14mm CCW thread cap
This is a thread cap (protector) for airsoft rifles (AEGs). It could be screwed on the threads whenever you are not using suppressor or flash hider. It has 14mm CCW thread (left-hand). Total height: 11mm Diameter: 25mm The idea behind…
- Pobrania
- 277
- Polubienia
- 23
- Ocena
- 0
P
PrintablesHanzovski_
12mm cw to 14 ccw - remix
Extendet 12mm thread, I had problem with durabilyty in this place. Slightly shortened 14mm thread, didn't fit my tracer unit. This is my first work with threadet think in 3d programm, so don't except something excellent.
- Pobrania
- 276
- Polubienia
- 19
- Ocena
- 5
P
PrintablesH6K2L8
CCW 14mm airsoft silencer
I got the idea from Novritsch Modular Suppressor V2. Made it to fit in the holster with a pistol. This is 10cm long and it's threaded in 14mm CCW. Holes for M3 bolt and nut to tighten it well in place. This is for looks only! I printed…
- Pobrania
- 266
- Polubienia
- 28
- Ocena
- 0
P
Printablesmilspecmoehring
XM177E2 Flash Hider for 14mm CCW
Airsoft Muzzle device inspired by the infamous Muzzle Device used on the XM177E2. Attaches via M14LH threads. Print Settings i used: Printer: Prusa MK3S+ Prusament PLA 0.15mm Layer Height 100% Infill If you need anything, feel free to…
- Pobrania
- 258
- Polubienia
- 29
- Ocena
- 0
P
PrintablesMike Froehner
Modular Airsoft Silencer V2 - 14mm CCW - with different skins - completly parametric.
last update 24.02..2025 Hello and welcome to the second iteration of my modular silencer with different skins. If you like you can tip me via paypal: https://paypal.me/crazYm1nd ---------- description This is a complete refactoring of the…
- Pobrania
- 251
- Polubienia
- 28
- Ocena
- 4
P
PrintablesEszOzwierz
Gas L96 - Well G96 Project (Front rail and 14ccw adapter)
Hello there, As i really liked my SRS i have tried my luck with Gas Sniper, a classic, WELL G96 (ARES AW338 Compatible) which have some non-standard solutions for todays airsoft standards. First model which i have designed is simple 14ccw…
- Pobrania
- 250
- Polubienia
- 46
- Ocena
- 0
P
PrintablesSpacelion
Air Gun Silencer DX M14ccw
My Silencer from the Daisy 881 with a M14x1 counter clockwise thread. Also a short version for lower powered air guns or softair guns. You can use the test print file to test the fitting with your printer settings with minimal material…
- Pobrania
- 245
- Polubienia
- 16
- Ocena
- 0
P
Printablessmog257
Airsoft Silencer 14mm ccw
!! You need to print it Upside down!!
- Pobrania
- 230
- Polubienia
- 23
- Ocena
- 0
P
PrintablesDario Ordovas
Airsoft MK18 Suppressor / Silenciador Silencer (14mm CCW)
[EN] Airsoft MK18 Mock Suppressor / Silencer (14mm CCW) Custom tactical mock suppressor designed to fit the MK18 airsoft replica. Features a standard 14mm Counter-Clockwise (CCW) thread, making it fully compatible with most M4/AR15…
- Pobrania
- 197
- Polubienia
- 22
- Ocena
- 0
P
PrintablesRAMTING
airsoft outer barrel extender (short ccw14 - ccw14)
fits nice. made on a resin printer but should work fine on other types.
- Pobrania
- 193
- Polubienia
- 25
- Ocena
- 5
P
Printablesmilspecmoehring
Noveske Style Flash Hider for 14mm CCW
Muzzle device inspired by the distinctive Noveske Flash Hider. Both parts go together by a press fit. Attaches via M14LH threads. Print Settings i used: Printer: Prusa MK3S+ Prusament PLA 0.1mm Layer Height 100% Infill Recommended Print…
- Pobrania
- 186
- Polubienia
- 22
- Ocena
- 0
P
PrintablesCreavertor
Waterproof Bottle Pill Container Reverse Screw Counter Clockwise CCW
Waterproof bottles with o-ring 62mm high bottle and 42mm small bottle, both with 26mm diameter and use the same Lid with reverse screw antikids , counter clockwise CCW, with sealed O-Ring. Im printed it in PETG and TPU.
- Pobrania
- 182
- Polubienia
- 36
- Ocena
- 5
P
PrintablesEmil H
14mm CCW airsoft mock supressor with baffles
This is a basic airsoft supressor/silencer with internal baffles and printed threads. Easy assembly just put in the baffles (10x) with the narrow cone part towards the barrel and screw the back cap in. Btw you need to use 0.2mm layer…
- Pobrania
- 179
- Polubienia
- 11
- Ocena
- 0
P
PrintablesJA3D
14mm ccw thread for well r1 uzi airsoft suppressor
14mm ccw treads and a suppressor with removable front cap for well r1 uzi Category: Toy & Game Accessories
- Pobrania
- 158
- Polubienia
- 13
- Ocena
- 0
P
Printables3D_Gibby
Cosworth CCW MK3 Shifters Simracing Replica
I recreated these shifters using photos and datasheets provided by Cosworth. They originally are part of the entire CCW MK3 wheel design, but as that won't be finished for some time, I decided to release them as a standalone design so…
- Pobrania
- 157
- Polubienia
- 21
- Ocena
- 0
P
PrintablesRon Kloberdanz
Male Dewalt Table Saw 90 deg Hose Adapter 2.5 inch CCW Thread
I liked the dust collection hose adapter @ter_251579 made, but I wanted a threaded section for the hose connection end so I could thread my hose instead of using hose clamps. I used another model of a 4" CCW threaded adapter and scaled it…
- Pobrania
- 144
- Polubienia
- 17
- Ocena
- 0
P
PrintablesMNishima
UMP 14mm ccw adapter
This is an adapter for Umarex UMP so that you can use 14mm ccw muzzle devices such as suppressors found here on printables. It's made so that the muzzle device is locked in place with both outer barrel slot and printed lock piece. The…
- Pobrania
- 137
- Polubienia
- 10
- Ocena
- 0
P
PrintablesLotus
14CCW Airsoft Suppressor, FOAM!
The suppressor is 7" long and 1.3" (34MM) in diameter. I printed with %25 infill (Grid). No supports needed! Enjoy and leave a comment if you print it!!!! *Sorry i don't have the best pics for this model * This is free for you to print,…
- Pobrania
- 136
- Polubienia
- 10
- Ocena
- 0
P
PrintablesVincent
Airsoft barrel extender 14mm ccw - 6 cm long
Simple airsoft barrel exention of 6 cm
- Pobrania
- 132
- Polubienia
- 9
- Ocena
- 0
P
PrintablesKP design
Muzzle brake 14mm ccw
Muzzle brake 14mm ccw. (14mmx1) for airsoft.
- Pobrania
- 126
- Polubienia
- 16
- Ocena
- 0
P
PrintablesDERedneck
1/2" UNF zu 14mm CCW Adapter
Einfacher und schnell druckbarer Adapter von UNF auf 14mm CCW
- Pobrania
- 121
- Polubienia
- 5
- Ocena
- 0
P
PrintablesGumo Design
14mm ccw adapter for Quasar gel blaster
Self-designed and tested.
- Pobrania
- 121
- Polubienia
- 13
- Ocena
- 0
P
Printablesk125bw
flash hider 14mm ccw airsoft
Remix of the Russian style flash hider for airsoft by H3mpp4, https://www.thingiverse.com/thing:2376386 , made it shorter and uniform width. Made to fit the bespoke airsoft short outer barrel for ares striker
- Pobrania
- 113
- Polubienia
- 7
- Ocena
- 0
P
PrintablesBlysprutan
14mm CCW to 14mm CCW adapter
The thread on my brand new silencer did not fit all the way down on my airsoft weapon. So i made a simple adapter 14mm CCW to 14mm CCW
- Pobrania
- 112
- Polubienia
- 6
- Ocena
- 0
P
PrintablesLab3D
MOCK SUPPRESSOR CHAMBERED 14mm ccw 150mm x 38mm
MOCK SUPPRESSOR TRINITY 14mm CCW THREAD (most common) 150mm lg 38mm diam. Built in two part with an I.D. of 32mm. This supressor is designed to be use with internal foam to supress the sound of gas airsoft bb gun.
- Pobrania
- 106
- Polubienia
- 5
- Ocena
- 0
P
Printablesawcmon
A2 Birdcage Flash Hider for Airsoft, 14mm CCW
Found a pretty good A2 birdcage flash hider on Thingiverse, but it doesn't actually seem to have the correct threading, so I edited it and added the 14mm CCW (M14x1 LH) threading that's on most airsoft replicas you would want to put an A2…
- Pobrania
- 104
- Polubienia
- 4
- Ocena
- 0
P
PrintablesBismuth Oxide
V3 UPDATE: 12mmCCW to 14mmCCW Adapter for G&G UMG Airsoft Replica
Updated with better modelled threads and nicer knurling. Now works better with FDM. This a printable adapter for the G&G UMG airsoft replica. It exist because the name brand metal ones cost $50 shipped and that is unrealistic for me, so I…
- Pobrania
- 101
- Polubienia
- 10
- Ocena
- 0
P
Printableshrootzel
Loudener for Airsoft (14mm ccw) and Airguns (1/2-20 UNF) - Tractrix Horn Attachment
Another take on the Loudener design from the Simpsons. Print upside down without supports. Scale if the threads are too loose or tight. The design is based on the tractrix profile to better direct and amplify the pew pew sounds. The…
- Pobrania
- 96
- Polubienia
- 9
- Ocena
- 0
P
PrintablesTinUK
Xcortech 12mm CCW Tracer Adaptor (Raven Hi-Capa 5.1)
My first upload. This may prove useful to other people :) Adaptor to fit a Xcortech XT301 tracer unit onto a Raven Hi-Capa 5.1 GBB airsoft pistol. Other pistols with a 12mm CCW female thread may also fit. The screws, LED and push button…
- Pobrania
- 92
- Polubienia
- 15
- Ocena
- 0
P
PrintablesAndrew Nelson
KJW M700 Barrel to M14 CCW Thread Adapter
KJW M700 Barrel to M14 CCW Thread Adapter Fits (snugly) over the unthreaded KJ Works M700 Rifle and adds M14 CCW threads for threading on muzzle devices (E.g airsoft tracer). I made the sleeve that fits over the barrel long so it covers…
- Pobrania
- 91
- Polubienia
- 9
- Ocena
- 0
P
PrintablesKptnAutismus
12mm CW to 14mm CCW adapter
threaded adapter to convert the 12mm clockwise thread nuprol likes to use to a more standard thread. I used it to put an Acetech Blaster C on a Nuprol Raven R92F. lay flat in slicer before printing.
- Pobrania
- 88
- Polubienia
- 9
- Ocena
- 0
P
PrintablesCc4Dayz
160mm ccw and cw outer barrel threads
For an muzzle device with 14mm c/cw
- Pobrania
- 88
- Polubienia
- 10
- Ocena
- 5
P
PrintablesAntherias
Airsoft Arrow Arms (ARES) APC9 14mm ccw barrel adapter
This adapter replaces the outer barrel of the airsoft replica Arrow Arms APC9. I created this adapter to be able to use most 14mm ccw muzzle device attachments for airsoft on the market. Flash hiders, thread protectors, muzzle breaks,…
- Pobrania
- 85
- Polubienia
- 6
- Ocena
- 0
P
PrintablesCube_Tech
14mm CCW compensator
It will fit the 14mm CCW thread. 32mm outer diameter. To be printed vertically on front, without support Some materials have different shrinkage factor, and and printers have different flow settings, please make sure that your printer is…
- Pobrania
- 78
- Polubienia
- 6
- Ocena
- 0
P
Printablescocun
Gel blaster hop up 14x1.5CCW thread
This is a remix of a remix. The original Matty's Gel Ball Hop up (don't think it's available anymore) was remixed to add a 14x1.5 counter clockwise thread. I have remixed it to add M6x6mm threads to adjust the hopup and to sceure it onto…
- Pobrania
- 75
- Polubienia
- 3
- Ocena
- 0
P
PrintablesDinoProductions3d
DIRECT THREAD ADAPTER 14MM CCW TO 24MM CW
3D model description This is just a simple little thread adapter for the DINORODUCTIONS Silencers, it is 14mm CCW to 24mm CW Dimensions: - Length: 15mm - Widest Diameter: 24mm !THIS IS FOR AIRSOFT OR MILSIM ONLY! (U CAN USE IT FOR…
- Pobrania
- 72
- Polubienia
- 4
- Ocena
- 0
P
PrintablesMaSa_0815
Silencer / Suppressor mounting M14x1 CCW to M12x1.5 CW
Time to share some stuff! I thought about a silencer / suppressor adapter for the really cool DeSteiner 1911 -> https://www.printables.com/model/1446099-desteiner-colt-m1911-mechanically-working-prop-gun Here I have 2 versions (short and…
- Pobrania
- 64
- Polubienia
- 19
- Ocena
- 0
P
Printablesmatthewbroyer
MOSQUITO Beta V2 Barrel Extension Suppressor 14mm CCW Threaded
This is a barrel extension (mock suppressor) designed to perfectly fit the M-LOK Handguard by Miki, for the MOSQUITO Beta V2 by HYBRID ARMORY. This will fit on your M-LOK Handguard, and most airsoft guns on the market, without…
- Pobrania
- 62
- Polubienia
- 8
- Ocena
- 0
P
PrintablesTheIronM
Begadi Airsoft Supersonic 9/45 Gewindeadapter 14 CCW zu 16 CW
Passend für das 16mm CW Gewinde für die Rückseite vom Begadi Supersonic 9/45 Modular Airsoft Silencer. Ich brauchte den Adapter, um den Silencer an ein Standard 14mm CCW Gewinde zu befestigen. 100% Infill PETG 0,10 oder 0,15 Schichthöhe…
- Pobrania
- 51
- Polubienia
- 0
- Ocena
- 0
P
Printablesdatapagan
HT-X3006 Chronograph - Airsoft 14mm CCW mount
Attach a chronograph straight to your RIFAttach a chronograph straight to your RIF printed at 0.2 height, 4 walls, 15% infill
- Pobrania
- 49
- Polubienia
- 3
- Ocena
- 5
P
PrintablesManbehindthemadness
EMAX AVAN 6x3.8x2 Long Range Prop (CCW)
A blank for design fitting. Original prop curvature was sourced from: https://grabcad.com/library/emax-avan-flow-props-1
- Pobrania
- 48
- Polubienia
- 4
- Ocena
- 0
P
PrintablesFaceHaver
Deodorant Can Prop Silencer Adaptor - 14mm CCW / 1/2-20 UNF thread
Little part to fit an aerosol can to an airsoft gun or airgun - files threaded for the standard airsoft M14 x 1.0 LH ("14mm CCW") fitting and airgun 1/2-20 UNF standard are included. This is to make a prop. While an average aerosol can…
- Pobrania
- 44
- Polubienia
- 3
- Ocena
- 0
P
PrintablesYAN
Flasshider 14x1 Negative (CCW) Linksgewinde
Flashhider for Airsoft m4 14mm Negative (ccw) 14x1 Linksgewinde
- Pobrania
- 40
- Polubienia
- 11
- Ocena
- 0
P
Printables《Quartz》
Umarex Airsoft MP5SD 14 CCW Adapter
I wanted a barrel adapter for my Umarex MP5SD so I made this. Bayonet fitting to 14 CCW. (Also compatible with some JG MP5SDs) A 0.4mm nozzle works fine for the threads.
- Pobrania
- 38
- Polubienia
- 5
- Ocena
- 0
P
PrintablesFelipe Augusto
Adaptador Ares cw para ccw
adaptador para AEG ares saindo de cw para ccw
- Pobrania
- 36
- Polubienia
- 5
- Ocena
- 0
P
PrintablesVincent0711
Cheap cure wash module (CCW) V1
Update 01.02.2020: bean protector grill and cleaning basket were updated for easier use and more washing volume. Cheap cure wash (CCW) module V1.0: As a SLA printer operator, you quickly figured how annoying and messy post processing of…
- Pobrania
- 36
- Polubienia
- 5
- Ocena
- 0
P
PrintablesVincent reid
Phantom 4 Pro/P4P V2.0 Quick Release Propeller Mounting Plates (2CCW&2CW)
Print in Nylon or other resistant material (Preferably GF or CF Nylon for rigidity) Regular PETG or even less PLA will probably not hold up Layer height: 0.08 Wall loops (perimeters): 5 Supports: Use auto support printed flat with snug or…
- Pobrania
- 36
- Polubienia
- 4
- Ocena
- 0
P
PrintablesDinoProductions3d
8.5cm / 3.35 in outer barrel 14mm ccw Extension
3D model description Barrel Extension with 8.5cm / 3.35 in, has a 14mm CCW Dimensions: - Length: 85MM - Widest Diameter: 20mm 3D printing settings My advice so you can get the best quality on this print on Cura 5.3.1 - Layer Height:…
- Pobrania
- 35
- Polubienia
- 3
- Ocena
- 0
P
PrintablesDERedneck
14mm CCW zu UNF
Dieser Adapter ermöglicht es UNF Schalldämpfer und Mündungen an 14mm CCW Gewinden zu befestigen
- Pobrania
- 34
- Polubienia
- 3
- Ocena
- 0
P
PrintablesA_Swerv
13mm (M) cw to 14mm (F) ccw adapter
13mm (M) cw to 14.1mm (F) ccw adapter unfortunately there is not standard 13mm thread option in fusion, it is some weird 13.157? mm thread from a pipe thread option, might need to re thread whatever it is being threaded into but i can…
- Pobrania
- 30
- Polubienia
- 2
- Ocena
- 0
P
PrintablesSatsattonic
airsoft outer barrel extension 25mm CCW
Airsoft outer barrel extension of 25mm M14x0.1 CCW Must be printed with high density infill (80%)
- Pobrania
- 28
- Polubienia
- 6
- Ocena
- 0
P
PrintablesHZlejsacki
thread adapter from 25mm to 14mm ccw with underbarrel ris mount (AK TO M4)
I made this for my CM035 for airsoft underbarrel granade luncher
- Pobrania
- 27
- Polubienia
- 2
- Ocena
- 0
P
PrintablesFrank
H8R 14x1 CCW muzzle adapter
A 14x1mm CCW threaded adapter for the H8R. Folks have made a lot of these over the years. We all seem to run in to the same problem - There's a very narrow space between the interior of the h8r where the muzzle piece rests, the outer…
- Pobrania
- 25
- Polubienia
- 1
- Ocena
- 0
P
PrintablesB4by_dR1v3R
Airsoft 14mmCCW Blue Can replica
As-close-as-possible-according-to-pictures-found-on-the-internet™ replica of the long and short 'Blue Can' suppressor training tube for 14x1.0mm CCW airsoft threads, two seperate pieces - a base and a body (the tube) and they just push…
- Pobrania
- 25
- Polubienia
- 1
- Ocena
- 0
P
Printableshrootzel
Hippie Daisy Thread Protector / Flash Hider for Airsoft (14mm ccw)
Hippie Daisy Thread Protector / Flash hider. 14mm ccw / counter-clockwise / left handed threading for most airsoft barrels. Without supports: Print hippie_daisy in white Print hippie_daisy_top in yellow for the ring on top, which you can…
- Pobrania
- 23
- Polubienia
- 7
- Ocena
- 0
P
Printablesarm00700th
AIRSOFT OIL FILTER M26 TO 14MM CCW
thread 11mm side im making like m8 nut for wench 11mm only long 10mm step file include UPDATE Added v2
- Pobrania
- 20
- Polubienia
- 6
- Ocena
- 0
P
PrintablesA_Swerv
12.1mm (M) cw to 14.1mm (F) ccw adapter
12.1mm (M) cw to 14.1mm (F) ccw adapter print 14mm side down made by me in fusion sometimes the threads get stringy but it works
- Pobrania
- 19
- Polubienia
- 1
- Ocena
- 0
P
PrintablesSarge324
HT-X3005 14CCW Front plate
Makes it easier to mount the chrono to front barrel. Can use original screws from the PCB that's screwed to aluminum housing. Made it for a friend with this chrono so I'm sharing here.
- Pobrania
- 18
- Polubienia
- 1
- Ocena
- 0
P
PrintablesEric
CCW Claw for Phlster Enigma
This concealment feature allows the user to offset a claw on the PHLster Enigma by one hole. It works by having three holes and one mounting position: The top hole is only for screwing a screw into your holster. This is partially…
- Pobrania
- 16
- Polubienia
- 2
- Ocena
- 0
P
PrintablesA_Swerv
16.1mm (M) cw to 14.1mm (M) ccw thread adapter
16.1mm (M) cw to 14.1mm (M) ccw thread adapter made by me in fusion
- Pobrania
- 16
- Polubienia
- 1
- Ocena
- 0
P
PrintablesA_Swerv
14.1mm (M) ccw to 14.1mm (F) cw
14.1mm (M) ccw to 14.1mm (F) cw print female side down made by me in fusion may come out with stringy threads but still works
- Pobrania
- 15
- Polubienia
- 2
- Ocena
- 0
P
PrintablesA_Swerv
11.5 to 14.1mm ccw (M) thread adapter
11.5 to 14.1mm ccw (M) thread adapter print 14.1mm side down made by me in fusion may print stringy, still works, might need to re tap or force thread
- Pobrania
- 14
- Polubienia
- 2
- Ocena
- 0
P
PrintablesJakub Machálek
Potentiometer (cap) CCW+
Potentiometer (cap) for guitar etc.
- Pobrania
- 12
- Polubienia
- 1
- Ocena
- 0
P
PrintablesHex Labs
Proxima Amplifier 14MM CCW AIRSOFT
FOR AIRSOFT USE ONLY INTRODUCTION Named after Proxima Centauri (Closest star from the sun) due to its slightly futuristic design. This model was made due to the fact that there is only a small amount of loudeners that actually looks good…
- Pobrania
- 10
- Polubienia
- 3
- Ocena
- 0
P
PrintablesGit_r_Printd
M14x1 CCW Airsoft Muzzle Brake
*****NOT FOR REAL FIREARM USE***** M14x1 CCW Airsoft Muzzle Brakes. M14x1 CCW threading Stubby brake is 28MMx28MMx43MM Bullet brake is 22MMx22MMx65MM Printed in PETG with .20 layer height, two walls, 15% infill, painted fuzzy skin. V1.1…
- Pobrania
- 10
- Polubienia
- 1
- Ocena
- 0
P
PrintablesBrunch
5mm Wheel CCW - 3mm gap.
5mm CCW wheel where the gap for the glass is reduced from about 3.5mm, to 3mm for thinner glass.
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
PrintablesMatthew 144
Airsoft Micro suppressor 14ccw
A smallER version of a silencer built for my AAP01
- Pobrania
- 8
- Polubienia
- 4
- Ocena
- 0
P
Printablesarm00700th
Tisha 14CCW (Airsoft)
no longer work with real one' tested with petg glossy af need lil print look better infill part no wall/buttom/top gyroid infill
- Pobrania
- 8
- Polubienia
- 0
- Ocena
- 0
P
PrintablesWinston3D
Toroidal Propeller CW CCW
This is a toroidal propeller for underwater (well that's all I've tested it with anyways) I originally used it on an ROV and with some small brushed motors they produced a good amount of thrust. I just printed them at 15% infill with…
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
PrintablesGSDM
WELL MB-03 14mm CCW Thread Adapter
A simple thread adapter designed for the WELL MB-03 stock outer barrel . It converts the MB-03 barrel thread to the common 14mm CCW (M14×1 LH) standard, allowing the use of most airsoft suppressors, tracer units, and muzzle devices.…
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0
P
Printables
MOCK SUPPRESSOR CHAMBERED 14mm ccw 150mm x 38mm
MOCK SUPPRESSOR TRINITY 14mm CCW THREAD (most common) 150mm lg 38mm diam. Built in two part with an I.D. of 32mm. This supressor is designed to be use with internal foam to supress the sound of gas airsoft bb gun.
P
Printables
Cosworth CCW MK3 Shifters Simracing Replica
I recreated these shifters using photos and datasheets provided by Cosworth. They originally are part of the entire CCW MK3 wheel design, but as that won't be finished for some time, I decided to release them as a standalone design so…
P
Printables
12.1mm (M) cw to 14.1mm (F) ccw adapter
12.1mm (M) cw to 14.1mm (F) ccw adapter print 14mm side down made by me in fusion sometimes the threads get stringy but it works
P
Printables
13mm (M) cw to 14mm (F) ccw adapter
13mm (M) cw to 14.1mm (F) ccw adapter unfortunately there is not standard 13mm thread option in fusion, it is some weird 13.157? mm thread from a pipe thread option, might need to re thread whatever it is being threaded into but i can…
P
Printables
16.1mm (M) cw to 14.1mm (M) ccw thread adapter
16.1mm (M) cw to 14.1mm (M) ccw thread adapter made by me in fusion
P
Printables
11.5 to 14.1mm ccw (M) thread adapter
11.5 to 14.1mm ccw (M) thread adapter print 14.1mm side down made by me in fusion may print stringy, still works, might need to re tap or force thread
P
Printables
14.1mm (M) ccw to 14.1mm (F) cw
14.1mm (M) ccw to 14.1mm (F) cw print female side down made by me in fusion may come out with stringy threads but still works
P
Printables
8.5cm / 3.35 in outer barrel 14mm ccw Extension
3D model description Barrel Extension with 8.5cm / 3.35 in, has a 14mm CCW Dimensions: - Length: 85MM - Widest Diameter: 20mm 3D printing settings My advice so you can get the best quality on this print on Cura 5.3.1 - Layer Height:…
P
Printables
DIRECT THREAD ADAPTER 14MM CCW TO 24MM CW
3D model description This is just a simple little thread adapter for the DINORODUCTIONS Silencers, it is 14mm CCW to 24mm CW Dimensions: - Length: 15mm - Widest Diameter: 24mm !THIS IS FOR AIRSOFT OR MILSIM ONLY! (U CAN USE IT FOR…
P
Printables
Brrr 14mm ccw threaded amplifier
I made this do then I can dominate the field with a lousy gun. The shots sound scary while shooting and it works. This is a 14mm ccw threaded amplifier designed for only 14mm ccw threads. This works and is perfect. Print this as 101% (one…
P
Printables
14mm CCW airsoft mock supressor with baffles
This is a basic airsoft supressor/silencer with internal baffles and printed threads. Easy assembly just put in the baffles (10x) with the narrow cone part towards the barrel and screw the back cap in. Btw you need to use 0.2mm layer…
P
Printables
H8R 14x1 CCW muzzle adapter
A 14x1mm CCW threaded adapter for the H8R. Folks have made a lot of these over the years. We all seem to run in to the same problem - There's a very narrow space between the interior of the h8r where the muzzle piece rests, the outer…
P
Printables
HT-X3005 14CCW Front plate
Makes it easier to mount the chrono to front barrel. Can use original screws from the PCB that's screwed to aluminum housing. Made it for a friend with this chrono so I'm sharing here.