1321 modeli
OpenSCAD Fletching jig If you have any suggestions, leave them in the comments or open an issue on GitHub Overview Simple yet effective fletching jig that will adjust to all your needs. Intended to provide new archers with access to 3D…
Wydruk około 0,92 €–1,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hi, this is my attempt to hopefully reduce the spread of the coronavirus or other germs, I call it the "Savegrabber". It is a hook-like device that allows the opening and closing of doors without touching the handle. There is also a tip…
Wydruk około 0,47 €–0,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Sure, you can buy a paper version at your local stationery store and it will cost you next to nothing, but printing this model will give you number of benefits: Both hands are moving independently Hands stay in position and do not fall No…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
UPDATE: My pattern didn't work properly so the measurements aren't accurate, just use them as a rough guide Workable area is 8.5", perfect for Letter (8.5"x11") sheets turned sideways, markings are imperial with 0.25" (6.35mm) spacing on…
Wydruk około 7,94 €–9,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The pupils listened to a lecture about schools in Africa, where they learned about what children in these schools lack. They decided to model and print simple teaching aids for mathematics.
Wydruk około 1,34 €–1,64 € nettoWstępna wycena jednego wariantu
I realized that I could put pegboard hooks onto anything. Suggest printing the pegs with an 80% infill for strength. Rest of print can be lower 10-20% Remixed from: https://www.thingiverse.com/thing:4382905 If you like what I am doing,…
Wydruk około 7,70 €–9,41 € nettoWstępna wycena jednego wariantu
Many of the other no touching tools do not have any type of enclosure which we will touch it with our hands or clothes eventually. Even those with an enclosure, it is a separate enclosure so it is not as convenient. This design is…
Wydruk około 1,66 €–2,03 € nettoWstępna wycena jednego wariantu
Double-sided mechanical curved switching track compatible with BRIO and IKEA wooden rails. Printable in place without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini…
Wydruk około 5,68 €–6,94 € nettoWstępna wycena jednego wariantu
Double-sided mechanical curved switching track compatible with BRIO and IKEA wooden rails. Printable in place without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini…
Wydruk około 3,55 €–4,34 € nettoWstępna wycena jednego wariantu
Seltener Fang (Rare Catch) by Ernst Herter Bildhauerei in Berlin Fixed Scan.
Wydruk około 8,62 €–10,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Overview Rocket with organic support in shape of thrust. There are three shapes of rocket. You can use it as a decoration or jewelry holder. I also added another version with place for pen or pencil. It looks like launching tower :)…
Wydruk około 1,68 €–2,05 € nettoWstępna wycena jednego wariantu
A friend asked if I could make a geocaching container in the shape of a bee skep that could be hung from a tree. This is the result.
Wydruk około 23,29 €–28,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These deck boxes are hinged and have a latching feature that allows you to open them by pushing the button on the front of the Pokeball. Print a base, top, hinge, and button for all versions. The great ball requires additional “Great Ball…
Wydruk około 10,62 €–12,98 € nettoWstępna wycena jednego wariantu
Designed for Coptic stitch bookbinding technique Workable area is 8.5", perfect for Letter (8.5"x11") sheets turned sideways, markings are imperial with 0.25" (6.35mm) spacing on center of each 0.13" (3.3mm) hole. Markings are recessed…
Wydruk około 5,38 €–6,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Double-sided short curved switching track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2…
Wydruk około 2,09 €–2,55 € nettoWstępna wycena jednego wariantu
The aim was to develop a lightweight hook system for the fishing rod that I use for Biltema geocaches. Because of the lever , each gram at the tip of a very long rod counts! The hook system consists of a tip holder and three hooks. The…
Wydruk około 2,24 €–2,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Double-sided switching and crossing track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2…
Wydruk około 6,18 €–7,55 € nettoWstępna wycena jednego wariantu
Double-sided curved switching track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini…
Wydruk około 3,36 €–4,11 € nettoWstępna wycena jednego wariantu
Double-sided short curved switching track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2…
Wydruk około 1,97 €–2,41 € nettoWstępna wycena jednego wariantu
Double-sided curved switching track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini…
Wydruk około 3,26 €–3,99 € nettoWstępna wycena jednego wariantu
Angle 25°, 75 massage points, non-slip surface, easy grip, tread surface 250x290mm. material PLA, PETG no supports
Wydruk około 47,63 €–58,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Double-sided roundabout switching rail compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2…
Wydruk około 3,86 €–4,72 € nettoWstępna wycena jednego wariantu
Double-sided three-way curved switching track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track…
Wydruk około 4,42 €–5,40 € nettoWstępna wycena jednego wariantu
Double-sided roundabout switching rail compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2…
Wydruk około 3,86 €–4,72 € nettoWstępna wycena jednego wariantu
Case for MeanWell RS-25-xx switching power supply series with on-off switch and fuse (Schurter or equivalent). Print instructions Included rsdoc 3D source is easily modifiable, corner mount presented is designed for Ikea Lack tables.…
Wydruk około 2,65 €–3,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This cap lets you add an eyelet to your PET Geocaching container by gluing it onto the bottle cap. This model accepts bottle caps up to a diameter of 30 mm. Instead of a model with printed threads, this method provides a better,…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It's a remix from https://www.thingiverse.com/thing:3370199 This is a simple snap case print to keep you from burning your fingers on the hot choke coil of the MT3608 voltage boost module. - No additional screws required! - Please note…
Wydruk około 0,64 €–0,79 € nettoWstępna wycena jednego wariantu
Double-sided three-way curved switching track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track…
Wydruk około 4,24 €–5,18 € nettoWstępna wycena jednego wariantu
Double-sided parallel switches track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini…
Wydruk około 3,28 €–4,01 € nettoWstępna wycena jednego wariantu
Double-sided curved switching track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini…
Wydruk około 2,67 €–3,26 € nettoWstępna wycena jednego wariantu
Double-sided curved switching track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini…
Wydruk około 2,56 €–3,13 € nettoWstępna wycena jednego wariantu
Mit dieser Halterung befestigen wir unser Gardena Micro-Drip Bewässerungssystem an unseren Blumenkästen. Die Wandstärke der Kästen beträgt 4 mm und die Ausladung der Halterung 70 mm. Translation: DeepL We use this bracket to attach our…
Wydruk około 6,44 €–7,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ein Remix von Runkel (thingiverese.com) für Geocaching-Angelhaken. Meine Aufnahme ist M6-Schraubgewinde, für Freunde habe ich das auch für M5-Schraubgewinde angepasst. Für neue Ideen bzw. Verbesserungen einfach melden. Ich bin noch am…
Wydruk około 1,22 €–1,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Modified model from @PrinterIsComing to have the same color finishing on the same level - it makes it easier to print it in color with manual filament switching. The original badge it pretty thick, it can be scaled down to 75% at Z axis.…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
Double-sided curved switching track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini…
Wydruk około 2,03 €–2,48 € nettoWstępna wycena jednego wariantu
Geocaching container with PET-cork, like Mats E container, just with 8x3mm magnets instead of 12x3mm Dimensions outside: 30x30x85mm inner diameter is 21.5mm x 82 mm Non printed parts 1x PET-cork 3x Magnet 8x3mm Print instructions I…
Wydruk około 2,13 €–2,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a simple magnetic holder for a PET-ling. Those are commonly used for geocaches. With it the PET-ling can be easily attached to any magnetic surface. The holder itself has a diameter of 27mm and is tight fit, so the PET-ling does…
Wydruk około 0,80 €–0,98 € nettoWstępna wycena jednego wariantu
Stretching Cat model with demonstration gcode for proper support. Remix of content prompted by @Senk_3022469 .
Wydruk około 1,67 €–2,04 € nettoWstępna wycena jednego wariantu
Double-sided curved switching track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini…
Wydruk około 2,14 €–2,61 € nettoWstępna wycena jednego wariantu
This was a quick replacement for the original hitching rail, which was broken and made from a material that could not be glued back together. I recommend printing it upright to get a nice round rail. I used PLA from Das Filament in…
Wydruk około 0,69 €–0,84 € nettoWstępna wycena jednego wariantu
A remix of jerrydi's "Geocaching tube 50x30". The tray in the original model designed to hold the logbook was causing issues for me resulting in my log becoming stuck in the lid. Happy printing! 😀
Wydruk około 1,32 €–1,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a simple First to Find (FTF) badge fitting a PET-ling. As geocoins don't fit, I designed this badge. It has the same size as an usual logbook for PET-lings and both should fit easily together. Use this badge to provide the first…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
Wall mount for Ikea's Badring. This water sensor should actually lie on the floor, with the sensors in the floor to detect water. Now with this wall bracket you can connect other switches without having to do anything special to the unit…
Wydruk około 1,08 €–1,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Logo: Geocaching Opencaching Size 50 mm, 70mm (mirror reflection), thickness 2mm Of course you can change the sizes in Cura I glued the logo to a flexible magnet and cut it out with a scalpel.
Wydruk około 0,56 €–0,69 € nettoWstępna wycena jednego wariantu
I remixed @aosilver solution for the lid and it was pinching the tubes when I opened the enclosure lid. Now fixed! It's a snug fit to the tubes do not slide. Now my MMU Buffer (leading to a Sunlu S4) feeds smoothly into the Enclosure. A…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Log housing for use with geocaching. See attached “Log housing for 35mm film canister how-to.pdf” for details.
Wydruk około 1,32 €–1,61 € nettoWstępna wycena jednego wariantu
Tool to help pull a leather pricking iron out of a piece of leather. Inspired by something similar made out of leather wrapped metal by Ethan Carter (https://www.instagram.com/p/CsmaGKEJja8/). I printed mine in PLA with 25% infill to make…
Wydruk około 0,74 €–0,91 € nettoWstępna wycena jednego wariantu
Updated version MK2: https://www.prusaprinters.org/prints/26725-door-hook-button-presser-with-enclosure-mk2-no-tou Many of the other no touching tools do not have any type of enclosure which we will touch it with our hands or clothes…
Wydruk około 1,60 €–1,96 € nettoWstępna wycena jednego wariantu
Remove support cylinders in switch parts. Screw M3x8 DIN 912 and Nut M3 DIN 985 are necessary for assembling. Parts of switch are marked, place them to the body correctly.
Wydruk około 0,37 €–0,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Czech geocoin 2026: Here Universal Geocoin 2026: Here Universal Geocoin: Here
Wydruk około 0,72 €–0,87 € nettoWstępna wycena jednego wariantu
Teaching Aid for Platonic Solids Cube Geometry Print with or without infill your choice. Remix as desired.
Wydruk około 3,84 €–4,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model of a simple balancing scale was created to be used as a teaching aid in an “unplugged” activity regarding sorting algorithms. The material might be used in computer science or maths classes to give students the opportunity to…
Wydruk około 1,32 €–1,61 € nettoWstępna wycena jednego wariantu
This is the second model we have made today and we decided to make it another keychain ornament which is a geocaching ammo can!
Wydruk około 0,90 €–1,09 € nettoWstępna wycena jednego wariantu
Es geht um ein Gehäuse für folgendes Netzteil: https://amzn.to/3Q7t0pd Ich habe mich beim Amazon Partnernet registriert, verdiene daher als Amazon-Partner an qualifizierten Verkäufen und bedanke mich daher, wenn ihr die Links nutzt. Ich…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Please support this model it will go a long way and help with design better versions just by liking and downloading 😀 Print Settings Supports: Optional Rafts: Optional Resolution: 0.2mm Infill: 15% Filament: Pla Assembly You will need all…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu
It is a simple cubeish box with a working hinge. The hinge shaft comes in two pieces, make sure to glue on the shaft cap after putting the shaft through the hinge.
Wydruk około 3,82 €–4,67 € nettoWstępna wycena jednego wariantu
A broom stick can be used. It has multiples widths.
Wydruk około 1,73 €–2,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EN: Simple coupling for attaching the plastic gutter to the gutter hook. The coupling is inserted or screwed into the half-slot in the gutter and then slid onto the plate at the end of the gutter hook. CZ: Jednoduchá spojka pro uchycení…
Wydruk około 0,76 €–0,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
its a mini swivel punching bag not much to it all you have to do is put the main stick through the plate you can tape it if you want then put the smaller stick through the hole in the bigger one then place the swivel part that you hit on…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena jednego wariantu
Teaching angular/rotational motion in physics, I was always looking for anything in my office to demonstrate rotation. I created this simple loop with four arrows -- it has been a huge hit with students. Use it to explain…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
Dieser Saumanschlag ist für die Bernette 42 cover Lockmaschine konzipiert. Das design wurde selbst getestet. This hem stop is designed for the Bernette 42 cover lockstitch machine. (Translate with deepl)
Wydruk około 0,31 €–0,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The project aims to introduce students to the 3D printer, Tinkercad and 3D printing and results in the printed picture dice for language teaching.
Wydruk około 1,14 €–1,40 € nettoWstępna wycena jednego wariantu
Zur Befestigung von Fensterdekorationen mit Abstand zur Fensterscheibe eignet sich dieser Haken. Der Haken wird durch eine Schnappverbindung in den Winkel eingesetzt und kann leicht entfernt werden, um z.B. das Reinigen des Fensters zu…
Wydruk około 0,79 €–0,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This 3D printable educational model demonstrates the basic principle of semiconductor doping using a physical, hands-on approach. The model consists of a base plate with recesses for individual atom pieces. Silicon atoms are represented…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
Aktualizace 15. 10. 2026: přidány soubory pro dvoubarevnou variantu (Prusa XL 2T) a tiskové soubory bgcode, doplněn seznam filamentů a nstavení tisku. Geometrie kostky se nezměnila. Hrací kostka na osobní zájmena v němčině: ich, du,…
Wydruk około 2,44 €–2,98 € nettoWstępna wycena jednego wariantu
Students will prepare joints for the purpose of teaching students in the subject of Technical Drawing. Studenti připraví spoje pro výuku žáků při přeměřování a rozkreslovní objektů Odborné kreslení.
Wydruk około 0,33 €–0,41 € nettoWstępna wycena jednego wariantu
Studenti si budou moci vytisknout, případně sami navrhnout budku pro ptáky, která bude sloužit jako schránka pro hru Geocaching.
Wydruk około 6,99 €–8,54 € nettoWstępna wycena jednego wariantu
I made this just as a personal project as I'm learning Fusion 360. I wanted to challenge myself to design a parametric box that would securely latch and print in place with zero assembly, this is the result. Note: Before printing you may…
A box/holder for your SD cards! It holds up to 12 microSD cards and 3 full-size SD cards. It also has an integrated lid connected via a print-in-place linkage, which latches securely shut to ensure your SD cards won't fall out on the go.…
CLICKbase , like the Clickfinity design it evolved from, is a latching Gridfinity baseplate that holds all Gridfinity compatible bins securely without using any magnets. The most significant difference with Clickfinity (and it's other…
Looking for an attractive and flexible storage system to organize and protect your trading cards? Don't banish your hard sought collectibles to flimsy generic cardboard boxes in the back of your closet, store them in style in these…
The remake of Puse RC1 and RC2 face shield. RC3 is mix of RC1 and RC2, it has extra space for glasses/goggles and better side protection. If you are printing it for someone else, please wash hands very well and carry mask/shield when…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
Plugs for original wall-attaching inserts can be rotated while pushed into the inserts. And I didn't like it at all :) So I designed a version that will always be in the correct position. Designed for ~4 mm diameter countersunk screw.…
Use my simple program to create fantastic switchable business cards. Before using the program, you need to prepare two images. The Program lets to combine the images to switchable card. Here is the link to download free version of the…
This thing is a great example of something useful you can do with your printer. It allows you to hang any broom or rake like object using a convenient click in, click out latch. This youtube video shows and example of one in action…
A female angel I sculpted in Blender. I didn't set a scale for the model so it will default to whatever when you load it into your slicer of choice - print it in whatever size you want. I printed mine 25 cm tall. The feathers needs pretty…
Introducing a latch that can be locked by turning the handle. This practical design is perfect for securing doors, windows, or other elements that require additional protection. Features: Locking by Turning : The latch handle can be…
Squid Game Gonggi Clicker – Keychain Version Take the stress relief on the go with the Keychain Version of this Squid Game-inspired clicker! Featuring 1 tactile button, it’s compact, lightweight, and always ready to help you fidget…
Large (as large as my printer allows) multiple entrance wood textured cave. ~15cm X 12cm X 20.9cm. Designed with 2mm walls and meant to be printed with 100% infill and no supports; thin walls in design make it unsuitable for significant…
Dimensionally accurate three-part design that can be printed and used without painting or post processing. Designed to be backlit for illuminated marker line Main switch body printed in matte grey PLA, though can be printed in any colour…
UPDATE 16/8/2024 Somehow I uploaded bad spring design but now it should be okay. If it does not work try pulling the spring out a bit or cut it a little shorter. In case of any problems do not hesitate to reach me in the comments. (I was…
The Voronoi Stretching Cat is a beautiful 3D model perfect for pet enthusiasts and those who appreciate contemporary art. The design employs a Voronoi pattern, which creates a mesh-like structure that is not only aesthetically pleasing…
The Latching Button Fidget Toy has a piston that can be pressed in. It remains hidden until the button is pressed. The button releases the piston and it snaps forward with a satisfyingly loud "click!" Simply, press the piston until it…
A standalone design that beautifully complements the design of the thorny rose stem, but could also go well with other flowers. The sheets are simply printed flat on the print bed, also with a colour change. The twist of the matter is…
Like options? This set of files has a lot of them! The matching looks makes them look great. The ability to pick the exact size for your needs makes them work great! The sizes 1, 2, 3, 4 relate to number of M-LOK slots that the cover or…
A metric Artemia or Brine Shrimp Hatching Bowl complete with lid, divider, instruction and net. After hatching the Artemia eggs, the nauplii swim towards to the light into the net to be feed to raise young aquarium fish. The bowl and lid…
More sizes are available here: https://www.printables.com/model/682920 A meticulously designed storage box with latching lid - the perfect organization solution! Ideal for small parts, tools, stationary, and other light-duty organization…
My version of a crouching xenomorph ready to strike. Enjoy! Update July 2024. I scaled this up to full size and will use him as a prop for Halloween. You can view the video about this alien on my YT channel at
Overview If you've printed a Lucky 13, you know how hard it is to keep track of all the accessories. Mr beeps' model was a great way to solve this problem, but I wanted a smoother, more secure design. This organizer includes spots to snap…
This model has three parts and prints with no supports, the bag screws together with threads and has holes to put catnip inside. It may be smart to scale down the top of the catnip container in the X and Y, but I was able to wear in the…
Spiderman crouching Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of…
These containers are nice for a fun puzzle geocache, but oftentimes they are just as hard to reset as they are to open. I made this in an attempt to fix that! To open it, you have to normally solve one of these puzzles. It takes about a…
Stretching cat phone stand, designed to hold a large phone the gap is 14 mm. Printed with supports, but I think if you drop the model 1mm under the build plate it would be possible to print without. I used a model from Cults3D ( Free STL…
STL Files and more free models on: https://makerworld.com/en/@mishirostudio Self-designed Pokeball for the 3D printer Dimensions I invested a lot of research and time to achieve the most realistic proportions possible. The diameter is…
Take out some stress or just fidget as you think with this miniature punching bag. Built using a 24mm long, 4mm OD spring I got from a pen. Used tape to stick to secure to desk. For sizing the gloves, what worked for me was using calipers…
A simple latching lid for barkeepers friend. The lid will snap over the container and the latch will catch on the lower lip. Printed in PLA with a .2mm layer height and 100% infill (the only space for infill is in the sidewall so it…
It's the Russian Doll Maze Puzzle Box, with the GeoCaching logo engraved in the lid. Get the other STL files from: https://www.thingiverse.com/thing:2607374 NOTE: Requires OpenSCAD version 2019.05 for the SVG file SVG file grabbed from…
My cat, Ghost, has taken to perching on the tower (GPU water cooling exhaust on top) and when she wants to play or is watching out of my room she had a tendency to stand RIGHT ON THE BUTTON! So, taking inspiration from RangerYogi's cover…
