Wyniki wyszukiwania: citrus

Sortowanie

83 modeli

P
PrintablesMakerTom

Citrus/Lemon Press - Support-free v2

Print this lemon press without support. Take food grade filament. I've printed it with PETG, 0,2mm layers and 0,4mm nozzle at 50mm/s. v2 provides larger juice volume and a optimized outlet, less dripping and better juice flow. The dome is…

Pobrania
713
Polubienia
74
Ocena
4,67
P
Printablesslipangle28

Measuring Cup Citrus Juicer

This is a citrus juicer that is designed to fit into a standard 2-cup glass Anchor brand measuring cup. My wife was annoyed with juicers that didn't have enough of an "edge" to release the juice from her citrus, so this one has sharper…

Pobrania
533
Polubienia
51
Ocena
5
P
PrintablesRobo3DDesiGn

Citrus Juicer.

Supports Are Needed. You Can Use It For Squeezing : Oranges Lemons / Limes Grapefruits and other citrus fruits. Enjoy & Share your prints with me !

Pobrania
499
Polubienia
32
Ocena
4,83
P
PrintablesMakerTom

Citrus/Lemon Press - Support-free

Print this lemon press without support. Take food grade filament. I've printed it with PETG, 0,2mm layers and 0,4mm nozzle at 50mm/s.

Pobrania
482
Polubienia
56
Ocena
5
P
PrintablesNextGen3D

Citrus Juicer

Citrus reamer for juicing oranges, lemons, limes, etc. Two versions are included, a solid version and a hollow one with internal ribs. The default size is probably too large (unless you want to juice grapefruits), adjust size before…

Pobrania
456
Polubienia
188
Ocena
5
P
PrintablesS8r1s

Citrus juicer

This Citrus juicer will allow you to enjoy your morning routine citrus drinks or squeeze citrus fruits with easy and leaving your workplace clean. Features: Easy to clean No cup required Allows you to pick out seeds Easy pour into any…

Pobrania
351
Polubienia
28
Ocena
4,5
P
Printablesjohny haky

citrus juicer

Juicer for orange or other citrus.

Pobrania
270
Polubienia
31
Ocena
5
P
Printablespyxlz

Fruit/Citrus Juicer

You can screw this on the top of a PET bottle and when you use it, the juice will flow right into the bottle. fits PCO1881 type bottles (like diet coke). Settings: any filament should work, but PETG, or another foodsafe and strong-ish…

Pobrania
261
Polubienia
99
Ocena
0
P
PrintablesIK3D

Squid Citrus Juicer

Just a hilarious juicer in the form of a Calamari, I hope you like it! You can print this with food safe materials, paint it with food safe epoxy, etc. Or just give it away as a joke! Easy and quick print in about 2-3 hours. Lay it on…

Pobrania
257
Polubienia
74
Ocena
5
P
PrintablesUko

Fancy Citrus Juicer

I liked the original design of Juicer - citrus reamer by milangladis In this remix I made a couple of important improvements: flattened the base because there is no way to nicely print such a shallow curve on FDM machines. hollowed out…

Pobrania
242
Polubienia
27
Ocena
5
P
PrintablesManfred Morgner

Citrus Press (all parts)

This is completely experimental, have no time now, to finalize the code, but possibly you simply need to print some of the STLs or you get the SCAD code as starting point of your project. Print Settings Printer Brand: Prusa Printer: i3…

Pobrania
219
Polubienia
27
Ocena
0
P
PrintablesTwirlygrlandMom

Easy Filament Change Multicolor Citrus Slice Wall Plaque Hanging - Orange Slice Circle, Lemon, Lime, Grapefruit Coaster

A basic citrus slice for a wall hanging or jewelry use. STLs available with or without a hole for your purpose. Scale up or down. Use the version with the hole for jewelry including earrings or pendant necklace, or scale large to put on…

Pobrania
206
Polubienia
64
Ocena
5
P
PrintablesNino Angelow

Citrus juicer

A simple citrus juicer with a large container. Rather, there is no need to say anything about it. it can be printed without supports, and one should use 3 outer walls

Pobrania
194
Polubienia
12
Ocena
5
P
PrintablesKimKim

Citrus Juicer top and base - REMIX

Citrus Juicer top and base.

Pobrania
179
Polubienia
21
Ocena
5
P
PrintablesClockspring

Citrus Box

No supports required - prints flat-side down for the main body, and detail-side-up for the lid :) Happy printing!

Pobrania
169
Polubienia
87
Ocena
5
P
PrintablesMTB3D

Hand held citrus / lemon /orange squeezer

A simpel hand held citrus squeezer. You can adjust for what purpuso you want to use it, by adjusting the scale in X and Y direction (and leave Z direction the same) No supports needed, Don't clean in dishwasher when you use PLA and high…

Pobrania
163
Polubienia
14
Ocena
4,5
P
Printablesfox

Screw on bottle citrus juicer

Creator:tammo66 https://www.thingiverse.com/thing:2205631

Pobrania
158
Polubienia
29
Ocena
5
P
PrintablesHahihula

Citrus Juicer fits on mason jar

Citrus juicer which can be screwed on a mason jar so the juice drips inside the jar.

Pobrania
153
Polubienia
29
Ocena
0
P
PrintablesTwirlygrlandMom

Citrus wedge half earrings - lemon, lime, orange, grapefruit, kids, summer, jewelry, charm pendant

Cute little lemon earrings ready for summer. You can also make a necklace or pendant for other forms of jewelry. For the findings to make earrings or necklaces: We like this set of hypoallergenic hooks and jump rings from Amazon:…

Pobrania
151
Polubienia
39
Ocena
0

Jar lid for juicing citrus fruits

Lid for juicing citrus fruits Perfect size for lemons and limes It can be twisted into a glass with a normal diameter of 78-80 mm

Pobrania
132
Polubienia
100
Ocena
0
P
PrintablesAlexT

Citrus Coaster

Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) This is a fun, fruit-themed coaster that…

Pobrania
131
Polubienia
38
Ocena
5
P
PrintablesTwirlygrlandMom

Citrus slice earrings with hole for post. Can be used as a pendant as well. Grapefruit, lemon, orange, lime earrings

Scale up or down to fit your tastes. I like printing at 80% for earrings (don't go smaller than that or the post wire won't fit through the hole.) You can also make a necklace or pendant for other forms of jewelry. For the findings to…

Pobrania
126
Polubienia
49
Ocena
5
P
PrintablesTwirlygrlandMom

Chunky citrus magnet, child-safe orange, citrus wedge magnet with hidden magnets. Change filament for multicolor. orange, lemon, lime, grapefruit

Another fun citrus slice. This one a powerful kitchen or play magnet, with the magnets hidden inside the part. If you haven't hidden magnets; it's easy! Program in a pause in your slicer at to drop the magnets in at 4.2mm Program a…

Pobrania
117
Polubienia
23
Ocena
4,67
P
PrintablesNozzleSting

Citrus-Peeler / Orange Peeler / Zitrus-Schäler PLR

(DE) Der Orange-Peeler PLR ist ein innovatives Küchenwerkzeug, das das Schälen von Orangen und anderen Zitrusfrüchten zum Kinderspiel macht. Mit seinem ergonomischen Design und einer scharfen Klinge ermöglicht er ein müheloses Entfernen…

Pobrania
108
Polubienia
15
Ocena
5
P
Printablesdavasny

Citrus peeler (orange, tangerines etc.)

During long and frosty nights, this little piece of plastic will be a lifesaver in a fight against a thick peel of orange. It will help you quickly with peeling those small fruits, so that you will no longer get your hands dirty. Grab the…

Pobrania
108
Polubienia
17
Ocena
0
P
PrintablesSzilamér Bódi

Citrus juicer

Nice practical citrus juicer

Pobrania
100
Polubienia
4
Ocena
0
P
PrintablesTsu
Pobrania
90
Polubienia
7
Ocena
5
P
PrintablesBlueberry Thor

Etrog (citrus) shaped dish for Sukkot

A small etrog (citrus) shaped dish / plate for Sukkot. For salt, sugar, honey or whatever you want in it - or flip it over and use as decoration.

Pobrania
85
Polubienia
19
Ocena
0
P
Printablescaesar_1111

Citrus Juicer with handle

Thks Walter for the design! I just wanted to have a handle to easily apply more fore pushing the juicer into the fruit and twisting it. Benefit is, you do not have to use a brim or raft for printing any longer…;) Since the original size…

Pobrania
83
Polubienia
13
Ocena
5
P
PrintablesPhiRequiem

Citrus Juicer Black And Decker

Citrus Juicer Black And Decker

Pobrania
79
Polubienia
6
Ocena
0

Citrus Juicer

I remember a glass juicer my mother had that she extracted lemon juice to make lemon pies and fresh lemonade. this is similar except it attaches directly to a PET bottle to catch the juice rather than pouring it from the collection tray.…

Pobrania
73
Polubienia
18
Ocena
0
P
Printableseclyptox

Citrus juicer krups replacement

I have designed a replacement for my juicer krups.

Pobrania
69
Polubienia
2
Ocena
0
P
PrintablesBambu Lover

Orange Juicer — 3D Printable Citrus Press

Description A functional and easy-to-use manual orange juicer designed for 3D printing. Squeeze fresh juice from oranges, lemons, limes, and grapefruits right at home — no expensive kitchen gadgets needed! The juicer features an ergonomic…

Pobrania
67
Polubienia
9
Ocena
0
P
Printableskevin

True Citrus / Tea Dispenser - Wall Mount

I had made a few of the tea dispenser's by Val and they worked great, but I didn't have a good place to hang them so they just sat on top of my microwave. I also started drinking the True Orange packs, which are phenomenal but I needed a…

Pobrania
65
Polubienia
13
Ocena
0
P
Printablesholec

Citrusy insert - Grove insert

Printed with PLA, DRAFT profile, 10% infill.

Pobrania
65
Polubienia
6
Ocena
5
P
PrintablesAdrianM.

citrus juicer

citrus juicer

Pobrania
64
Polubienia
8
Ocena
0
P
Printablesdek

Citrus Press for Sodastream Crystal Bottle

Inspired by the citrus presses which can be screwqed on PET bottles, I designed a citrus press which fits the glass bottles which come with the Sodastream Crystal 2. I designed it around the GL36 thread of the glass bottles I have…

Pobrania
60
Polubienia
9
Ocena
0
P
PrintablesUko

MUM5 Citrus Juicer Support

The citrus juicer of the Bosch MUM5 kitchen machine is attached in a way that puts high stress on the machine's arm. This support locks into the mixing bowl slot. Print instructions The overhangs close to the top are ridiculous. Also, the…

Pobrania
56
Polubienia
9
Ocena
5
P
PrintablesOcelotzlasu

Citrus - fidget coin collection

This is a collection of a few fidget coins designs. If you want smooth or clicky action, bigger or smaller, you'll find something for you. Descriptions and hardware you'll need is listed below. These fidget coins require some magnets and…

Pobrania
54
Polubienia
25
Ocena
0
P
PrintablesAnton Karmanov

"Citrus slice" guitar picks

Well, home-made picks is not shiny smooth like branded. But are still playable. PLA is a relatively rough material, which gives significant attack. PETG are also but not as much as PLA. Check there is no seams on tips of picks. It is…

Pobrania
52
Polubienia
4
Ocena
0
P
PrintablesDokyCZ

Ruční lis na citrusové plody s redukcí na zavařovací sklenici a redukcí místo kliky pro aku-šroubovák

Materiál pro tisk PET-G, Tryska 0.4mm, vrstva 0.3mm. Použití podpěr s odsazením 0.2mm, min. 2 kontaktní vrstvy a pouzdro okolo podpěr.

Pobrania
49
Polubienia
20
Ocena
0
P
PrintablesMirecXP

CitruSquee

Squeeze them all! :) My wife has just asked me to print some citrus juice squeezer, so I've designed it this way. It seems it works great, as it will squeeze 100% all the juice from your oranges, lemons or grapefruits, leaving just the…

Pobrania
48
Polubienia
7
Ocena
0
P
Printableswlfmario

Citrus press ( Zitronenpresse )

Citrus press (Zitronenpresse) Category: Kitchen & Dining

Pobrania
47
Polubienia
1
Ocena
0
P
PrintablesUko

MUM5 Citrus Juicer Shield

A shield that you can install on a Bosch MUM5 citrus juicer attachment. This thing will stop splatter from flying towards the wall behind the kitchen machine while you are juicing citrus fruits. Print instructions Print with a brim

Pobrania
35
Polubienia
7
Ocena
0
P
Printablesplanetar

Citrus

I had TPU in mind when designing this, a thin flexible layer between a coffee pot or beer mug and the desk's surface, just to shield off direct contact. A height of 1 mm works fine with TPU, change the Z-resolution in the slicer if you…

Pobrania
32
Polubienia
2
Ocena
0
P
PrintablesNotJannet

Sparkling Citrus Refreshment Bottle

FFXIV and MtnDew are doing a promotional event where you can exchange codes from real bottles for in-game items, including this “Sparkling Citrus Refreshment” bottle. So of course I decided to 3D print one for fun & now so can you.

Pobrania
32
Polubienia
7
Ocena
0
P
PrintablesMANIC 3D PRINTS

Citrus Lemon Keychain Sets

Add a splash of sunshine to your day with this cheerful lemon-themed keychain collection! Featuring four fresh lemon designs—including whole lemons, sliced lemons, and citrus cross-sections—this bright and refreshing set is perfect for…

Pobrania
31
Polubienia
3
Ocena
0
P
PrintablesGazzaladra

Citrus juicer “Boaty”

Would you like to support my work? :) Check out my full catalog with exclusives, early access and commercial licences. — A boaty-looking citrus juicer with two spouts. One with a separator for seeds and pulp and one without. The spouts…

Pobrania
30
Polubienia
13
Ocena
0
P
PrintablesTimo

arendo citrus juicer motor shaft

motor shaft replacement for arendo citrus juicer https://www.arendo.de/zitruspresse Mod. Nr.: 303323

Pobrania
30
Polubienia
2
Ocena
0
P
PrintablesCodyDSS

Citrus Fruit Container

A three-part container (body, drain, cover) used to store your lemons and lime slices so they don't go dry or bitter between your cups of tea.

Pobrania
29
Polubienia
10
Ocena
0
P
PrintablesTwirlygrlandMom

Citrus Slice Necklace pendant, multicolor with filament changes, fun, retro, punk, kids charm jewelry

A fun, dual mounted necklace pendant charm with two holes in the model to easily mount on jump rings and onto a necklace. .2 layer height. Utilize filament changes in slicer for color change. Enable ironing for a smoother finish. Check…

Pobrania
29
Polubienia
22
Ocena
5
P
PrintablesAtraout

Juicer orange or citrus

A one-handed citrus press, with a good grip thank you for your return

Pobrania
27
Polubienia
2
Ocena
0
P
PrintablesCyclone-6

Citrus Peel Slicer

A tool to allow easy slicing into the thick peels of citrus fruits. Layer height 0.15mm Infill 15% Perimeters: 3 Custom Supports

Pobrania
26
Polubienia
3
Ocena
0
P
PrintablesFerhat Karatas

Gear for Braun Multiquick 5 citrus press / juicer

No support needed Note: I increaserd the inner diameter with a drill to D = 4.0mm to ensure a close tolerance fit with the pin. If you appreciate my work By-Me-A-Coffee: https://buymeacoffee.com/ferhatkaratas Printer brand: Creality…

Pobrania
26
Polubienia
1
Ocena
0
P
PrintablesSopkmi

Citrusy insert (obalené karty) - Grove insert (sleeved cards)

Insert pro hru Citrusy, který nahrazuje bílou krabičku a tím pádem pojme obalené karty (vyzkoušeno s obaly Diamond). Doporučuji zajistit gumičkou, aby nevyjížděl z krabičky. Insert for card game Grove to fit sleeved cards (for example…

Pobrania
25
Polubienia
2
Ocena
0
P
PrintablesDarkR

Sodastream adapter for screw on bottle citrus juicer V2 from tammo66 / Sodastream adapter für screw on bottle citrus juicer V2 von tammo66

I really liked the idea of tommo66's Screw on bottle citrus juicer V2 ( https://www.thingiverse.com/thing:2205631 ) and I really wanted to use it with my Sodastream bottle. I made an adapter from Sodastream to normal PET bottel thread, so…

Pobrania
24
Polubienia
11
Ocena
0
P
PrintablesMarczan2501

Bosch Citrus press ring

The original part from the citrus press got lost during cleaning so I made a replacement. Część zamienna do MUZ5ZP1 Citrus press z serii Bosch MUM 5

Pobrania
23
Polubienia
4
Ocena
0
P
PrintablesPechi

ETA lis citrusu

Lis citrusu

Pobrania
20
Polubienia
0
Ocena
0
P
PrintablesRonster

True Citrus Organizer

A small set of organizers for packets of True Citrus flavors. Labels on boxes include "lemon," "lime," and "orange." There is also one blank version. I created this set originally for a friend who asked for a small, modular storage…

Pobrania
20
Polubienia
7
Ocena
0
P
PrintablesLayer3dprinting

The CitrusClaw

One thing I have always struggled with is peeling all of my citrus fruits. Since I trim my nails regularly, I have nothing to start the peel. Most times I just end up biting the peel, but that leaves you with an unnatural taste in your…

Pobrania
18
Polubienia
3
Ocena
0
P
Printablesklima3D

LebenLang Citrus Juicer

Ersatz Aufsatz für die Zitruspresse von der Firma „LebenLang“

Pobrania
18
Polubienia
2
Ocena
0
P
PrintablesGrimrreaperr13

Citrus Slice Coaster

I modeled this for myslef and figured i might aswell submit iit to the contest that it just so happened fit the theme of

Pobrania
18
Polubienia
3
Ocena
0
P
PrintablesPineapple Dan

Pulp tray for citrus press

Pulp tray for citrus press

Pobrania
17
Polubienia
4
Ocena
0
P
PrintablesJonybat

MUM5 Citrus Juicer Support (easier print)

The citrus juicer of the Bosch MUM5 kitchen machine is attached in a way that puts high stress on the machine's arm. This support locks into the mixing bowl slot. Modified original model for easier printing. Print in whichever solid…

Pobrania
16
Polubienia
2
Ocena
0
P

Lemon / Citrus Hand Squeezer — Reamer + Strainer Cap + Pour Spout

A two-piece manual citrus squeezer — print both parts, drop the cap on the bowl, and you have a hand juicer with a strainer and a pour spout. How it works Cap = strainer disc + swirly helical reamer cone . The cone is a…

Pobrania
15
Polubienia
2
Ocena
0
P
PrintablesJ H

Folding Citrus Juicer

Citrus juicer similar to one I saw on Amazon, but 3D-print friendly. Would recommend making this out of something fairly rigid, ideally with some fiber reinforcement. The one I saw on Amazon was PP-GF.

Pobrania
15
Polubienia
8
Ocena
0
P
PrintablesDe3DPrintman

Sieve For Professional Hendi Citrus Juicer

The original sieve is made from ABS and I needed a replacement fast so I opened Fusion360 and designed this one quickly. It fits great and I am printing it in PAHT (high-temperature nylon filament) so that it can be cleaned in a…

Pobrania
14
Polubienia
1
Ocena
0
P
PrintablesNeshi Models

Insert Citrusy

Insert pro hru Citrusy, který nahrazuje papírovou krabicku. Do insertu se vejdou obalene karty.

Pobrania
13
Polubienia
0
Ocena
0

Citrus press cup for GRS press

Replacement cup for GRS make citrus press. The cup fits into the base funnel. Printed without supports.

Pobrania
11
Polubienia
0
Ocena
0

citrus from objectified model (FREE)

this is the citrus model i made! this took me around 4 days in total to make i remember making one similar last year! but i never published it cause i was unaware where i should post it but now i do! and now you can have your fruity bat…

Pobrania
9
Polubienia
0
Ocena
0
P
PrintablesCeco Gatev

Citrus Juicer / Hand Reamer — Lemon & Lime Squeezer (Customizable)

A simple hand citrus juicer: press and twist a halved lemon or lime onto the ridged cone to release the juice, which collects in the bowl below. A pour lip makes it easy to tip out. Parametric: scale the cone and bowl for limes up to…

Pobrania
8
Polubienia
0
Ocena
0
P
PrintablesDirectedHunt42

Multi-Sized Citrus Juicer

Screw together citrus jucier with compatability for small and large fruits. Features: Screw together design to allow for changing for either large or small citrus. Lid meshes with small juicer head to allow fully encolses twisting. Funnel…

Pobrania
8
Polubienia
0
Ocena
0
P

Funny citrus Keychain

Funny citrus keychain for a cheerful mood.

Pobrania
5
Polubienia
1
Ocena
0
P
PrintablesForgeFiles

Handheld Citrus Juicer Reamer, Lemon Lime Orange, Ergonomic - 3D Printable STL File

A unique 3D printable creation — this Handheld Citrus Juicer Reamer, Lemon Lime Orange, Ergonomic Handle, Juice Strainer Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…

Pobrania
4
Polubienia
0
Ocena
0
P
PrintablesMilanS

Odšťavňovač citrusů

Odšťavňovač citrusů

Pobrania
4
Polubienia
2
Ocena
0
P
PrintablesDstrangio

Citrus Slice Whole - No Hole

I needed a print with no holes

Pobrania
3
Polubienia
0
Ocena
0
P
Printablesmathieu-abati

Electrolux citrus juicer nozzle

This nozzle is probably compliant with several Electrolux citrus juicers. The open/close nozzle feature is lost with this replacement part, but for me is was quite useless and moreover was the reason to build a new nozzle, as the original…

Pobrania
3
Polubienia
0
Ocena
0
P
PrintablesSnoreo

Citrus Plant Label–Meyer Lemon Tree Garden Marker

🍋 Meyer Lemon Tree Plant Tag – Deep Spike Garden Marker Tired of keeping the original nursery tag wrapped around the stem because you’re afraid you’ll forget what the plant is later? Upgrade to a clean, durable label designed to live in…

Pobrania
3
Polubienia
0
Ocena
0
P
PrintablesTony Hanma

Citrus Juicer - Ribbed Cone on a Pouring Cup

Two-part citrus juicer: a 12-rib reamer cone that seats inside a 70 mm cup with a pouring notch. No supports. Cup Ø93 × 70 mm (about 350 ml below the seat) Cone plate seats on a 45° ring inside the cup, so both parts print without…

Pobrania
3
Polubienia
1
Ocena
0
P
PrintablesDstrangio

Citrus Slice Halve - no holes

I needed this with no holes

Pobrania
2
Polubienia
0
Ocena
0
P
Printables

Citrus juicer “Boaty”

Would you like to support my work? :) Check out my full catalog with exclusives, early access and commercial licences. — A boaty-looking citrus juicer with two spouts. One with a separator for seeds and pulp and one without. The spouts…

P
Printables

Handheld Citrus Juicer Reamer, Lemon Lime Orange, Ergonomic - 3D Printable STL File

A unique 3D printable creation — this Handheld Citrus Juicer Reamer, Lemon Lime Orange, Ergonomic Handle, Juice Strainer Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…

P
Printables3DPmom

Clicky Citrus Spinners (2-in-1 Fidget Toys)

You get twice the fun with these two-in-one fidgets: a rotating magnetic “ratchet” fidget and a spinning top 🙌 Important: You will need (8) 6mm x 3mm neodymium magnets for each fidget (4 magnets for each half of a fidget) Here is an…

Polubienia
32
Ocena
0