161 modeli
My 6 year old wanted these for qite some time and there was not any nice model so i made him (pretty) safe pair that should not break easily. Should be printed with supports under claws, placed on the flat part. No post processing needed.…
Wydruk około 0,99 €–1,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I created my Velociraptor Claws Scratcher for everyone, who like Dinosaurs and need stylish Scratcher :-) I tried to design my new model like funny and useful tool, to can scratch on too far places, like back. I took a one original model…
Wydruk około 4,32 €–5,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
>> UPDATED VERSION OF THE SLOTH AVAILABLE HERE << The Flexi sloth with hooked claws - hang it from a plant or a string! Or just let it sloth around, your choice. It's adorable both ways. The claws can be snapped into place. The face has…
I know other models exist, but nearly all of them have a lip on the top which goes over the knuckle. I'm more fond of the design where the claw just comes out between the knuckles, so I made this. Just plug the blades into the grip and…
Wolverine claws for cosplay or display. Only one claw file. Placement on hand determined by how far forward the claw is on the handle. Recommend testing fitting each claw one at a time starting with the middle claw. July 2024: Added more…
And now Dummy 13 is also a Weapon X.
The model is to be printed in 4 parts: 3 claws and the grip, and then assembled and glued. Consider the horizontal expansion setting in your printer to make the parts fit. Dimensions are 21 cm long and 6,5 cm wide. To legally sell PRINTED…
Sorry for the wrong files last time. Now it should fit a 235 x 235 mm build plate. I would recommend gluing the center rod in place to keep everything from spinning. It's made for cosplay only.
Here's the V7 of my wearable set of claws, that extend/retract with your fingers movement. The ZIP file contains a wide range of sizes and a few variants, allowing for a good fit (hopefully) for most users.
Introducing the the Clawstrider from Horizon Forbidden West! This machine is to scale with the official board game and stands on a 40mm base. It is intended to be printed in one piece for stability. All credit for character design goes to…
Update 18/11/2022 Thank you all for sharing, printing and enjoying this humble print. As I found that many removed the logo, I took it off and uploaded a bookmark. I also added a longest version, for those that need something over 10 cm…
This is a model I designed to let people have a chance to make claws for a dummy 13
I have designed this version inspired by swords and other retractable models. I have noticed that depending on the filament the performance may vary. For example with PLA+ from Sunlu I have better results than with CosPLA from Polymaker.…
Recently I bought my mum gloves with claws for the care of flowers in the garden but the available size was too big. So i decide to use 3D printing, to solve this problem and now the claws allow for comfortable work. After dealing with…
Clamping Claw in two sizes with M6 thread for a CNC my recommendation: -> petg -> 250/70 degrees celsius
A awsome pair of claws for Dummy 13.
Hi Ryan, Here are two very clean cut model cowl versions of the black panther, but hopefully the Neckless and Claw will be ideal for you and your sons project, Please double check the sizing, as I try to generally make it round medium to…
halloween is coming! enjoy it with these claws
just repaired the model
I have improved some of the popular Stealthburner Patterns with the following attributes: transferred them to the release version of the Stealthburner Main Body made the color patterns 1mm thick, so that also weaker colors can shine and…
My goal was not to be as accurate as possible but to make an easy-to-print look alike krueger's glove. And it's really easy, you can't miss it, no support needed. You can easily modify the finger dimensions to fit your hand in the…
Material Frame parts ABS, ASA, or PETG Armor parts Any Layer height First layer 0.2 mm Other layers 0.15 mm Number of perimeters 2 Infill 20%, rectilinear First layer speed 25% of default Elephant foot compensation 0.15 mm Supports None…
This remix of user guillermytho 's Claws Bookmark allows an easier fit between the two bookmark parts. Spacing tolerance has been increased and is now deeper, allowing easier installation of the bookmark tab and potentially providing a…
Highly recommend printing in PETG, with supports. Be very careful when connecting the claw and finger hinge parts, and connecting the thumb to the hand, those joints are the weakest. If possible, add a make! :)
Sculpted in nomad, my first 3d print to offer the world! Here is a simple but toony styled fursuit claw. Don't worry, it's not sharp! It has a base for easy gluing. Just cut a hole in the tip of the paw, slip the claw through, and glue…
This is the Wolverine Claws that I remixed. Fixed the seam in the middle of the blades. Category: Scans & Replicas
An ancient Indian weapon that was designed to fit over the knuckles or be concealed in the palm Category: Art
This model is compatible with the lego system.
Why purchase a ready made set of meat claws for a few dollars, when you could spend a few days painstakingly designing a set in CAD (and starting from scratch over and over and over again), a day printing them and hours of sanding them…
Dummy 13 Wolverine Mask and Claws resize 250%
This model is compatible with the lego system.
Overview Ring holder for men in shape of knuckleduster with claws. Printing Printed with Prusa mk3s+: 0.4 mm nozzle, 0.3 mm layer height, filament Print-me Ecoline PLA (color: Polar White, Antracite Black)
A while back I made a sword from plywood. Recently, I wanted to display it in a less gathering-dust-in-the-corner-fashion. To that end I found models for squash claws which I modified. Usind Blender I bent them to hold the blade at a…
The model is a clamping set for fastening workpieces for further processing on different surfaces. A set of clamps consists of three parts: 1. a block 2. one clamp 3. one screw To clamp the workpiece, the block must be placed on a flat…
Gangcat - Claws out, shades on
print 6 claws and 2 rods for a full set, I would recommend putting some hot glue on the rod, and then slide the claws on.
Freddy Krueger finger claw. Print it better with TPU to have a better finger grip and tolerance
Dummy 13 Wolverine Mask and Claws resize 200%
A small model i made in tinkercad. use plastic cement to glue on the mesonet.
Remix of 'Claws Bookmark' by guillermytho and 'Witcher signs bookmark' by pszilagyi. The claws and bookmark print separately and are glued together (CA glue). Claws model requires support (I recommend blocking supports over the slot on…
This is a remix of a design by 16605346228. All i did was scale the finger rings up and down a little to fit my hands.
My Back Mech Arms/Claw Tentacles, But now remodeled for easier printing and assembly! Make sure to be VERY careful when attaching the claws to the hand! Assembly guide on how to build:
Keyrambit Edition Claws : I was inspired by claw-like plugs, everyone always does the same thing with secured holes. Keyrambit can be colored in BambuStudio. This is a cool gadget that everyone should have! Print Profile: Quality: Layer…
This model is compatible with the lego system.
This a 3D printer design based on laser cutter design I made in 2016. This is a large design so I included a split version that you can glue together. Original description: "A claw design based on wolverine. I tried to make them as movie…
Good for grabbing things that you might want to grab with your upper feet if you were a bird man that is.
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
I decided to make my own wolverine claws for Halloween. The facial hair is up to you. Instructions 1). Cut 6 of the attached files out of a sheet of steel on a laser cutter or something like that 2). Grind down any sharp edges 3). Cut out…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
These are some wearable claws that fit perfectly on my little fingers. If you are an adult, I'd recommend scaling up to 125% which makes it heavier, but at least it fits. They take 30 grams and 1hr 30mins for a full set of both hands,…
Wanted a wolverine to go with my deadpool Lucky 13
remix of wolverine claws by Carlos 3d print all parts on one bed
Scale to fit your fingertips. mimics the movement of a cat claw.
From the start of Deadpool 3 when he tied Logan's claws to his arms
There are two versions one direct to be able to print without support, and angled one allowing the better protection for the finger (see picture to support & tip strengthening needed) The stl-files are solid. This allows better scaling…
Tiled Wolverine Claws ================= I have remixed them from "Wolverine Claws in plastic" by user "chefmaki". I really liked this claws and my cousin wanted to have a pair of them for a costume party, but unfortunately they don't fit…
I made x 23's claws Print Settings Printer Brand: FlashForge Printer: Adventurer 5M **Rafts:** Doesn't Matter Supports: Yes **Infill:** 15% Filament: ELEGOOO PLA White Category: Toys & Games
I took @orangepiweb's model, added connection between the 4 claws, enlarged it by 25% and added holes for 4 magnets. The idea and that you can make red or black streaks and white claws and then connect it to a magnetic surface. its about…
Dire Crowley's mask and claws. Print the mask once and secure it to your head with elastic. The thumb claw fits 18mm. For the remainder of the fingers, scale accordingly to your remaining four fingers. Remember to account for the…
This is an old creation from the beginning of my 3d modeling journey. This has been made on Milkshape 3d and I decided to save it from the depth of my backup folder. Franc-fully, I don't believe the claws could survive the test of…
fallout's most deadly predators in the wasteland.
Wolverine collapsible claws
Hello, I have for you a Scorpion, a scorpion with claws . They are really true to their real sting. A little scary, but still suitable as a decoration, or for coloring. The scorpions are fully authentic, very detailed. Good luck with the…
A Santa Crab - a Santa with Claws. A Santa Claws. A test of https://www.blendergpt.org/app that ended up being printable.
dummy 13 wolverine claws enjoy
Unlike his adamantium-coated claws, these are not indestructible and can break in combat. They are less effective against armored foes, rely on brute force, and are typically considered a lower power level than his metal-coated claws.
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
A seamless phone stand with a pair of scary claws. Great for the coming Halloween. No overhang, NO sharp edges, No support, YES YES YES. Also check my other phone stand with various logos. Print instructions Category: Office
if you want mods to the fists or claws, please comment what you would like to see
This trailer is hitchable to toy tractors of unknown scale, please see photos for reference. Instructions (my way of building): there is no need of glue or screws - connections are made with mild overlap wheels and clamps are made for dia…
Replacements for B&D Workmates (old, Europe) Two sorts of claws, one needs a bit support on the round part and has the disadvantage that the clamping face is not sligthly tilted (as the originals are). I did not found it slipping on wood…
Santa claws sculpture. I may have made a typo :-)
Cylinder is 16mm in diameter which was designed to fit nicely in the pipe insulation I purchased. I added a small hole in the cylinder so that a wire or string can be threaded through the sides of the “arm” and the claw/hand to hold it in…
Biker armed with Tiger Claws Print instructions Unassociated tags: 1/48 Category: People
small size made for a full cosplay finishing up the mask
claws-pics coming soon!
Protective coverings for worn down dog toe-nails/claws. Simply resize to get the proper fit. Background: My boxer dog has developed canine degenerative myelopathy (DM) which causes her back legs to drag at times. When walking on rough…
just shortened the claws so the can be printed on a 200x 200 print bed but still fit in handle
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Claws that can pick up pixels for FTC during the 2023 season, they can attach to servos so they can be opened and closed. I made them for my FTC team, Titan 7831. The attachment points are intended to be used with GoBuild servo hubs.
https://twitter.com/trevwall/status/1143695664259325954 Then this: https://vinepair.com/booze-news/trevor-wallace-white-claw-truly/ It's like a Pierre that does squats. Print instructions one stl file. use Prusa slicer to modify layers…
Santa Claws Godzilla Cookie Stamper
Ported from HL2 zombie torso model, cut the model from its claws and there it is. All supports, size, parts etc. are up to user to tweak and change.
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
My kid's constantly losing/forgetting to charge her ipad. I thought making the charging spot dragon-themed might help solve this issue. That kid loves dragons. I've seen a lot of floating shelves that look like hands and thought surely…
The mouth is an 8 x 16 I2C led matrix sourced directly from freenove (it is the one they use in their ant robot among others), order from [email protected] There is something similar on the Otto DIY website…
Bird claw model for costumes/cosplay. I recommend printing at low layer height or in resin with supports enabled.
Insert holds base game with 2 expansions. Lid is elevated (check photos).
Miniature Display stand for Warhammer Underworlds Spiteclaws Swarm warband. Written in cadquery. Project page - Part specs, printing tips, and kit part counts https://miniforall.com/minidisplaytray You can support this project and other…
Wolverine Claws - Ice scrapers for Printables contest For fun, not for real use. I recommend using a stronger material.
“I ain't killin' you bub -- I'm not makin' it that easy on you! I've decided that for what you did, you're gonna pay for a long time!”
This model was printed in PLA with tree support. The model was drawn oversize and will need to be scale to your preference. The pictures show the bookmark at 30% overall scale.
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
