1264 modeli
Hello, I have a clothes peg for you, food. They work beautifully and only require very little material to make. Ideal for attaching laundry while drying. I used PLA/PETG Basic as the material No need to use supports If you are interested…
Wydruk około 1,84 €–2,24 € nettoWstępna wycena jednego wariantu
This is a chip clip design. Print two of the clips and a spring to make a complete piece. The spring is inserted using a screwdriver.
Wydruk około 1,13 €–1,38 € nettoWstępna wycena jednego wariantu
The normal version requires a 16mm M3 bolt to secure everything in place. Just print the model together; reserve the “filler block"; put the hook over the horizontal side rail of an Ivar shelving unit; hold the filler block in the bottom…
Wydruk około 1,07 €–1,31 € nettoWstępna wycena jednego wariantu
First modification on my rooftop tent. This little clip allows you to dry your clothes under your tent. I tested the clip in ASA PETG and CarbonfiberPETG, all materials stand our 3 week journey. !!You need to print it with 0.25 and 100%!!
Wydruk około 0,33 €–0,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It's a tiny clothespin, but as a single part and print-in-place. It uses a ‘snake-bite' to hold material together because it doesn't have any extra force pushing the clamp closed. The force is much less then you'd get from a clothespin…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
To replace the Ikea Pressa clothespin who's breaking all the time . My model have a print in place pivot point for a better life span. Print instructions Print in one part and press ( until you hear a clic) it before use. Install the…
Wydruk około 0,56 €–0,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Info + features: parametric source file (so you can create any length with any amount of hooks that fit your printing plate) it is on purpose NOT print-in-place , so anyone can have colored hooks just pick a rack and print required number…
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
This is my design of an intentional technical-looking hook to hang clothes or bags to a clothes rail. I designed it for a minimal material use and with a good compromise of stability. Update 2022-09-27: Added D18 for Ikea furniture. Added…
Wydruk około 2,03 €–2,48 € nettoWstępna wycena jednego wariantu
English I created these hangers for my granddaughter, because the number of doll clothes by far exceeded the number of hangers available - the situation was critical ;-) Because of the different sizes of the doll dresses I created 2…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu
Nachdem eine Halterung unserer Kleiderstange zerbrochen war, lagen die gesamten Kleidungsstücke unten im Kleiderschrank. Das passiert natürlich an einem Sonntag, alle Geschäfte sind geschlossen und wir wissen nicht, ob es überhaupt Ersatz…
Wydruk około 0,79 €–0,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Basic sewing patterns for barbie dolls (original size). If you want, add for example pleats, fastenings and slits for better fit. You can also add decorative beads, buttons, frill, lace, bow, pocket…I recomend an elastic fabrics. Cut the…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
Źródło oznaczyło ten model jako treść 18+.
Wydruk około 2,66 €–3,25 € nettoWstępna wycena jednego wariantu
This is an adapter that fits onto a clothes line. It holds its position through friction by weaving the clothes line between its body and arms. The holes at the bottom can hold a coat hanger or anything else. (We use them to hold party…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Addition to Leifheit clothes dryer as in picture - your robotic vacuum cleaner wont stuck anymore
Wydruk około 0,71 €–0,87 € nettoWstępna wycena jednego wariantu
Cap Hook for Hanger Turn any clothes hanger into a hat organizer. This clever little hook clips directly onto a standard hanger, instantly transforming it into a storage spot for your baseball caps. No more caps piled on shelves, stuffed…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Our clothes were getting some deformities from hanging on the IKEA clothes stand. To mittigate this issue I designed a small cap covering the pointy end. The inside diameter is 19,5 mm. The ball itself has 50 mm in diameter. It is…
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
Na výběr je ze dvou druhů - děrovaný s hexagonálním vzorem nebo plný. Modely a tiskové soubory jsou přiloženy. --- There are two types to choose from - perforated with a hexagonal pattern or solid. Models and print files are included.
Wydruk około 3,01 €–3,68 € nettoWstępna wycena jednego wariantu
Design Concept This model is inspired by the practicality and aesthetics of geometric designs. Its sharp lines and curves allow for a strong grasp with minimal material use. Use Ideal for securing clothes on a line or for indoor use on…
101.40 x 190.90 x 12.00 mm
I designed this clothespin that can be used on various garments as well as for clothes. The presence of some raised lines allows for a good non-slip grip during use. Printing tips: Material: PETG (for its elasticity and outdoor…
Easy to print, easy to assemble, easy to use. Recommends 10 laundress out of 10. 😀 Recommended print settings and material Perimeters: 3 (4 for spring) Infill: at least 30% Supports: no Filament: spring only from PETG and other materials…
I came up with this simple and quick yet strong 3d printed peg which doesnt require any assembly, one has smooth jaws and other one has small teeth. I strongly recommend print with PETG as the spring from PLA doesnt really hold up that…
🏆 Thrilled to share that I've been nominated for Platform Designer of the Year at the 3D Printing Industry Awards 2026! If you enjoy this model, I would be incredibly grateful for your vote. [Click here to vote for Thorin Oakenshield]…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATE Aug 27, 2024] Added a version of the tensioner…
淘宝上看到有在卖这种衣架挂钩，就自己画了一个，用起来确实很方便，希望大家喜欢！ 填充率高一些30%以上，比较牢固。 Taobao saw this hanger hook being sold, so I drew one myself. It's really convenient to use. I hope you like it! The filling rate is higher than 30%, which is relatively firm.
Dimensions (LxWxH) 70 x 30 x 10 mm (100% scale) Basic information Print in place clothespin. It's designed primarily for laundry, but you can use it for many other various purposes, such as sealing bags, holding stuff together, etc.. The…
Customizable sewing button for clothing repair. Requires OpenSCAD, BOSL2, and hkern0_scad libraries. Vary diameter, thickness, number of holes, size of holes, etc. 25-01-18: Added 9mm sample buttons 25-01-21: Added 11mm, 13mm, and 17mm…
Print-in-Place Clothespin Simple print-in-place clothespin with an integrated spring mechanism. The model is designed as a one-piece print without assembly. It was created and tested mainly for PETG. PLA is also possible, but the printed…
Repair Clip for Clothes Drying Rack The metal rungs of drying racks tend to snap off after some time, leaving the metal part dangling. This clip fixes that. You will need to bend the rung so that it securely attaches to the clip. The clip…
It's a medium sized clothespin, but as a single minimalistic part and print-in-place. It uses ‘snake-bite' style teeth to hold material together because it doesn't have any extra force pushing the clamp closed. The force is a little less…
Collapsible / Rotatable Clothes Hanger (Print in Place) This collapsible / rotatable clothes hanger weighs little, is easy to store and is perfect for on the go. The rotation locks into the open and closed positions with a loose fit. If…
Check out my updated and improved version here . In my pantry we always reach for the clothespin style clips first. This is a very simple and easy to print model that tries to capture what makes the clothespins work better. The “armpit”…
This is a remixed version of the excellent cord spool from Stubbsie to use it as a camping/travel clothesline. I added a hook to the shell of the spool and designed an another hook for the cord end. Printing Print in PETG or ASA/ABS with…
Update 22.03.2025 The files have been updated to simplify assembly, especially when connecting the parts using filament. Additionally, the left and right top parts can now be joined with an double hinge, allowing the board to fold…
Clothespin print in place Please adhere to the model's license terms. It is becoming increasingly common for my models to be stolen, distributed without permission, and resold.
Das ist ein Ersatzteil für den IKEA Pax. Es ersetzt die Kleiderstangenhalterung die gern mal ausbricht ;) Druckt es in PETG oder einem anderen flexiblem Matierial - der Schnappmechanismus muss sich etwas bewegen können. Es handelt sich um…
English This is another variant of doll clothes hangers I created for my granddaughter, because the number of doll clothes by far exceeded the number of hangers available - the situation was critical ;-) Because of the different sizes of…
Second iteration of my Minimalist Clothespin Chip Clip. This one has a serrated flat spot that makes it hold bags a little better. I print them with the .2mm Quality preset in PETG with perimeters increased to 4. No supports or brims…
I made this collapsible, print-in-place clothes hanger for the fashion challenge. The idea was to take up a small area so smaller printers can print too, and to design the hanger so that it can collapse for easy travel, all with just one…
A simple and effective design, when you just miss some clothespins. No supports, no brims, no sharp edges. Available with 4 different gap sizes to suit every need. L (4mm gap) M (3mm gap) original design S (2mm gap) XS (1mm gap) Ready to…
Would you like to support my work? :) Check out my full catalog with exclusives, early access and commercial licences. — A print-in-place foldable clothes hanger. It can be printed on a standard-sized fdm printer (220 x 200 mm). It folds…
Parametric Clothes Hanger Hook (Closet Hook) Hook to allow daisy-chaining of clothes hangers. Improved and parametric remix of the original by goprinttech: https://www.thingiverse.com/thing:5254835 Improvements: Smaller size for quicker…
Remix of the clip to hang it on a cloth line I added a stronger version.
Basic dimensions are down in a drawing, you should scale the model to fit your bag and clothes rod. Print on the side, no supports needed. Add enough wall layers to achieve your required strength.
This is a heavy-duty version of the clothes hanger that I designed. For lightweight items like shirts etc, the standard clothes hanger is more than sufficient and uses a lot less material. These are a great way to use up spool ends or…
This is a clothes hanger for Barbie. I designed it by measuring the original one. You can see a comparison of the original and the printed one in the photos. For the logo I used https://www.thingiverse.com/thing:1152706 It has to be…
I needed some clothes hangers so I designed these neat foldable ones which fit on a 22x22cm Ender 3 build place. No supports are needed for this print. I recommend printing it in PLA with 4 walls and 5 top and bottom layers at 0.2mm layer…
This design provides strong clamp. Just download then print and use. You don't need to add anything else. Don't forget give me a like!
Clothes rack for 1:6 scale dolls that looks realistic and elegant thanks to the combination of 3d printed sides and embedded wooden skewers. I recommend for assembly 10 pieces of ordinary skewers (diameter 3 millimeters), shortened to 15…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATE Aug 27, 2024] Added a version of the tensioner…
Tendedero Caravana Tendedero que se inserta en el rail de la caravana, autocaravana o camper. Simplemente con ponerle una cuerda tienes un tendedero para cuando no tienes un árbol cerca. Impreso en Petg. Al 20%, menos la guia que tiene el…
Printed in PLA, 15% infill with the standard Bambu Studio values. AMS is not required to print the colors. A skewer stick has been used to make the bar inside the closet. The pieces are glued. Door pivots need to be trimmed and sanded a…
A few years ago I found this clothes peg on Kickstarter. As usual, they were charging a lot for it. I'm cheap, and Kickstarter has a poor track record. So, I made a copy of it. Given this is not, technically, my design. Please don't sell…
General Saves space in your wardrobe. Based upon a ready made product, which was only for sale per 30 pieces. Now you can print one or two. Printing Choise of 2 sizes. Print with support on build plate. For optimum strength: 5 perimeters,…
Print with multiple periphery layers (6+) to increase stiffness.
This is a sample set for my my frogfolk Kickstarter, link here if you're interested: https://www.kickstarter.com/projects/jamiekorte/frogfolk-3d-printable-minis
This is a close replica of the original Barbie Clothes Hangers that come with Barbie accessories like the "Barbie Style Ultimate Closet". I've included three designs. A plain hanger, Barbie's Hanger and Ken's Hanger (Or Kendal's for that…
Description I was replacing the clothesline with a new rope but the old tensioner was rusty and wouldn’t work. This is the replacement that can be used with up to half inch (12mm) rope. You may need to manually rotate the cams to lock…
Clothes Hanger for dolls, Perfect for doll outfits like T-shirts, dresses or jackets. Can be also used as Clothes Hanger for kids clothes if you scale it up.
We needed some extra space to hang clothes from so I made this wee attachment to stack multiple hangers off one hanger! Ideal for small clothing racks or organising your clothes better!
This is a simple close hanger that I designed because I needed some more and I thought it would be a good use of spool ends or filament I'm not going to use for anything else. The design can be printed stacked. You will need a relatively…
I got inspired by a public domain design of a clothes peg that is printed in one piece and decided to create it in Solvespace. The spring on the peg works surprisingly good even with regular PLA. EDIT: I've added a modified clothes peg…
A clothing hook designed to hang your clothes on the window of your shower. Step included to make it fit for your showerscreen. Comment if you need adjustments !!
Wäscheleine für VW T6.1 mit drei Leinen / Clothesline for VW T6.1 with three lines
Two variants available PLA works, but PETG may be better (?)
Update [2024-11-12]: Just to make clear, there are several versions to use according to printer capability: 0.20 clearance 0.35 clearance 0.50 clearance Original Also changed the position of the model, to half-open, so it is easier to…
Modified clothes peg. Looks the same but completely redesigned. I use PETG for Top and Bottom part and PC for String.
3 tension strengths: Utilizing one, two, or no tension blocks, the inserts compress the spring, applying a preloaded force to the tips of the clip for optimal performance.
Ein steckbarer Kleiderbügel in 43cm Breite. Druckbar auch auf kleinen Druckern mit 200x200 mm Druckbett. Print Settings Printer Brand: Anycubic Printer: i3 Mega S/Pro Rafts: No Supports: No Resolution: 0.2 mm Infill: 25 Filament: extrudr…
Clothes rack in lightweight and foldable version, no need to glue. Clothes hanger is inpired by Barbie silkstone hangers, but easier to print. You can adjust high as you need. Scale 1:6, without supports, material PLA, layer height 0.2…
The wife wanted some colorful hangers for the new baby and asked that I whip some up. Super simple and easy to print and strong. 195mm (7.75") wide Does not fit standard closet bar.
Stackable clothes hanger connection hooks can be used to hang on one clothes rack to connect the next.
A clip for clothes, fabric, curtains, etc.
Designed this on shapr3D on iPad. I's a clothespin with a classic shape. No metal spring needed. 100% Printable. As requested I'm uploading a second version with a thicker body where you push it open with the fingers. Print instructions:…
Simple clothes dryer hook. Are you tired for the fact that the side parts of the dryer rack fall off all the time when you store it? This model will help you to forget about this issue!
Simple foldable travel hanger. Print in place, no support, no required hardware, no assembly. Print Settings : It is REQUIRED to put additional external perimeters: 0.4mm Nozzle : Perimeter = 4 0.5, 0.6mm Nozzle : Perimeter = 3 High…
Ein vollständig druckbarer “fully printable” Kleiderbügel in drei Teilen. So paßt er auf das Druckbett des Prusa i3 MK3S/S+. Einfach jedes der drei Teile ausdrucken, sieben Nieten dazu, alles zusammenstecken, fertig. Wem der Halt der…
Intended for outside use so PETG is recommended, for inside use PLA would be fine. Recommended to print with 0,4 mm nozzle and 0,2 mm layer height.
It is designed to fit over any clothesline with a line diameter of 5mm or less, and has a spring clip embedded in the central support tower that prevents the basket being knocked or bounced off the clothesline. It is quite large, with a…
A mount that holds a pipe and can be used to hang clothes or other hangable objects. The original model used 6 screws with a 13mm cap diameter and an outer thread diameter of 6.75mm. The pipe I used was 26mm in diameter. F3D File: To…
Really love all the various sock clip remixes, adding one more that hooks onto a clothesline instead of a drying rack. Should be much easier than fiddling with clothespins for drying socks outside. Originals provided by @ Bike Cyclist and…
I loved the version @Pippa made but wanted to also give the option to pull a zipper if needed, so I added a hook on the other end. It's sturdy enough that I could pull up my jean zipper (sorry about that POV) lol. I wouldn't go yanking on…
Take a german Wäscheklammer and get the spring out of it. This works like a charm. Supports needed!
The print file is in multiple parts to allow for printing in TPU if/where needed as this may be useful for some individuals to provide extra grip and comfort to the handle scales. The STL as provided creates a friction fit and did not…
I thought that this would be cool with bat wings, so I made it. PETG is best. Please post photos of your bat clothes pegs !
This is a minimalistic clothes hanger for pre school children. The with of the hanger is 262 mm (10,3 inch) and it can be scaled if needed. The slopes of the shoulders and placement of the hook were modeled after the best fitting hanger I…
strong compact no print supports (optional) can be reinforced with M6 washer (optional)
Print with PLA or PETG with 0.25mm or 0.3mm layer height. Place on one side left or right doesn´t matter. Turn on “ Brim ”, otherwise the print might get loosened due to small adhesion surface on print bed. No supports needed. You can…
this design is made for M3 threaded inserts. You will need a 35mm M3 screw for an drawer with 15mm wall thickness. All parts are aligned correctly and can be printed without support. For the best contrast switch the filament color at an…
Intro: These are some simple hook for your wardrobe. They are mounted from the back with M3 inserts and screws. For customization every hanger can be “redesigned” in Prusa Slicer by removing the top and bottom solid layers and change the…
Other designs and store-bought items inspired me. It fits perfectly on a 35mm wide door and most can still be closed. Perfect for hanging coats and drying laundry Printed in PLA+ 2mm layers, 0.6mm nozzle with 20% infill
A soft edition of Tvorim3D design . There are a couple of clothing items that are delicate, and when used with regular pegs they can wrinkle, for those items, a soft peg is ideal. Printing The two parts can be printed in different…
Since the original mounting mechanism is quite poorly designed and breaks easily when disassembling, I designed a more robust one. It does not rely on clips and makes gravity do the job of keeping your rail in position :)
Space-saving hangers. The published models save from 2 cm to 18 cm over a normal sling bar of 200 mm length (also published). And look the commemt below stl The total length of the hanger is given by the diagonal of the bed of 300x300,…
Having a bunch of brocken pegs I spent a few hours to extend the life of their metal springs and to convince my wife of the advantages of a 3D printer... There is 2 versions for 2 different size of springs: 50-18-55: 5.0mm diameter of the…
Place up to 12 clothespins in the jig and hold them stable for engraving. Makes it easy to engrave names on clothespins for party nametags. Edit the SVG to use the jig. Import it in Lightburn and change the text or put images in the…
Should fit most basic irons. Y = 113 mm (from the back to the cable hole) X = 126 mm (thickest part of the iron)
![#0178 [UPDATED] Automatic Paracord Clothesline Tensioner (spring loaded, for 4mm cord)](https://media.printables.com/media/prints/962703/images/7574921_253a05d3-b794-48ef-9bfe-458d80461001_e08b1156-15dd-4fad-b664-246a109e7b5a/rl-20240819-012.jpg)
![IKEA Pax Kleiderstangenhalter [Clothes rod holder]](https://media.printables.com/media/prints/10395/images/86352_da05d17d-0974-48e4-ab49-c5e30a91a323/ikea_pax_10395.jpg)
![#0179 [UPDATED] Automatic Paracord Tensioner for Clotheslines [spring loaded, for 4mm cord]](https://media.printables.com/media/prints/962702/images/7581598_122262e0-2234-49ee-be2c-d0307a9276db_a2d9492a-091a-48f9-9736-3e0258748626/rl-20240819-011.jpg)
![Customizable clothes hook [mounted-from-the-back-edition]](https://media.printables.com/media/prints/75587/images/817825_0ace74fd-9fe2-4019-b475-0ed9380de7a7/20210908_170722.jpg)
