198 modeli
This is a overlay for the moon tiles in Terraforming Mars - Colonies expansion to get them fully enclosed.
Wydruk około 0,79 €–0,97 € nettoWstępna wycena jednego wariantu
I was looking for a box insert for the game Terraforming Mars that is compatible with sleeved cards but could not find any. Therefore I decided to design my own. My insert is compatible with the base game and the two extensions Colonies…
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
Colonial Viper Mk 1 - OBSG Easy to figure out. This was made in Fusion 360 and off of original 3d scans of one of the show viper models. IMHO, probably as good as Alain Rivard's. Absolutely no sale of the printed model nor STLs. I monitor…
Aliens APC, connecting pieces of filament, pins and gluing, m3x8 and m3x10 screws needed viz galeri fotos APC wheels rotate and turn in sync, rotating and sliding cannon, rotating front cannon, sliding side doors, interior from side door…
Also known as the “Full Bird”! The head of this eagle faces it's right, towards the Olive branches in it's right talon to symbolize always seeking peace but holds arrows in it's left talons to show preparation for war. The one's who've…
This is a faceplate for Terraforming Mars - Colonies tiles. I tried this version , but the dimensions were slightly off. Labels were cut off, and I had a very slightly different design in mind, so redid it. If you have the broken token…
Battlestar Galactica Colonial Raptor. I couldn't find any models out there, so I took one from the game Diaspora. I extracted the model from the game, chose the highest detail mesh, converted it to stl and fixed the surface problems in…
Petrus Parlerii de Colonia Peter Parler Petr Parleř Print: - vrstva - 0,2mm - podpěry - NE Varianty: Peter Parler Black + white + red - běžný tisk, následně složit Peter Parler layers - změna barev po vrstvách (1 vrstva = 0,2mm) 1 vrstva…
For everyone obsessed with lighting, a full size lamp for your printing enjoyment. Hardware needed: 10x M3x30mm 6x M3x10mm socket cap screws super glue clip in bulb socket (E12) such as…
As a special request to Straeker. I did all that I could as far as my abilities go. I've split it up in such away that there should be no need for supports although there is a couple of pieces that will need a little. I saved all the…
This is my first attempt at a Bambu Studio complete “project”. The model was colored, then disassembled to fit on multiple plates. You can reassemble the rocket in the software to see where everything goes. It's been cut to fit onto 3…
Les colonnes Morris et leurs affiches de spectacle sont présentes depuis le XIXe siècle dans les rues de Paris. Les colonnes Morris deviennent très rapidement des éléments emblématiques du paysage parisien. Depuis leur création à Paris,…
A miniature lunar colony that works as a desk organizer. Domed habitat modules sit on a cratered base, with the domes hollowed into compartments and a deeper well among them for pens, pencils and brushes. Smaller craters around the edge…
Al Mon has a beautiful Viper MkI on Printables with 45 files. It is an awesome model. But, not everyone wants to build with that many pieces. I couldn't find a simpler one here, so I uploaded DavidBogearts two piece model from…
The white arrows for TM Colonies are underwhelming. I took BillZareks retro/futuramma as wells as Cycco's subs (they pass nicely for transport ships) and added a 9mm x 9mm square hole for the cube. Printed off a few fleets for TM friends.…
Organizer for Moon Colony Bloodbath. The main design idea was to make bringing the resources and cards to the table easy. For this, each deck has is own box with lid, and each resource has is own box. You may replace your resources for…
This is an upgrade for the Colonies Expansion of the board game Terraforming Mars. Special Colony tokens with the Colony symbol were created, along with a storage tray to hold the tokens. The tray fits nicely into the Terraforming Mars…
The trade fleets that come with the Colonies expansion are basic shapes - an arrow, with a spot for a cube (the white arrow in the picture). I may bundle more ship types into this project, sometime in the future - you may want to tag this…
Had some small gaps to fill after some renovation so I modeled my trim boards, rather than trying to find new ones to match and buying way more than I needed. I added a 40mm stl, and a 200mm that you can just stretch on the Y axis to your…
An old file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model,…
These models are designed to fit within the three open spaces beneath the character boards. Money in one large tray People in the other large tray. Small single tray for Crates and small double tray for Apples. Print without supports at…
Insert for the board game Moon Colony Bloodbath that fits sleeved cards and makes set up faster and easier. No lid lift. Includes the following pieces: Player Board Storage: this must be printed in 2 parts and then glued together. Card…
🇺🇾 ¡Bienvenidos a Uruguay! Welcome to Uruguay! This model was designed by Dany Sánchez . This famous landmark of Uruguay is located on the Río de la Plata river in the old town of Colonia del Sacramento . This settlement is of great…
Good luck Bianca, Hope the file works for you, Cheers Jace Print instructions Category: 3D Printing
🛰 FOR THE GLORY OF ZEON — LET THE COLONY PRINT! Citizens of Side 3 — and makers across the Earth Sphere! Today, we present not a toy, but a monument to Zeonic engineering pride: A 1:150,000 scale replica of the legendary space colony —…
Best Viper model out there. I just added some plugs to make the engines and wings easier to assemble and sturdier. The main fuselage was clipped to fit on a Flashforge Adventure 5. I also played with the Viper base from:…
This is a modular colony I made for a role play board game. The game isn't finished yet, but simply building a mars or underwater colony is just as fun as using it for a game. The buildings snap nicely in place using 6x2mm round magnets .…
I designed a set of dungeon sticks for science fiction fantasy with starfinder/starwars style in a mind Category: Models
Hi guys, after Nanolongrange comes Picolongrange! This is my take on a tiny FPV drone with good range. It is based on a 3d printed 70mm frame and small 1.6" propeller. By using Tinywhoop parts you can keep the costs down. It features -…
M.A.S.H. - Colonel Sherman T. Potter - 1972-1983
This is a set of pieces that can be used to recreate the Cavalry Colonel (Colt Carlson) figure at 500% scale. This figure was released in 1996 and appeared in 4 sets between 1996 - 2002. All of the stl files needed to create this have…
I needed 6 sets of shoe buckles for an upcoming theatre production of Sleepy Hollow. We didn't have a large budget then I realized that I could just 3d print them so here it is. It's 100% print in place, all you will need is 1" wide…
Formicarium for ants. Fits a 16mm test tube. The glass is from a 10x15 inspire LILA photo frame, available at Leroy Merlin. You need a few m3 screws
Modèle réalisé à partir de photos, les dimensions on été déduites d'un plan trouvé sur internet. Imprimé en plusieurs partie. Le modèle complet n'est là que pour avoir une vue de l'ensemble monté. --- Modello ricavato da foto, le…
M.A.S.H. - Lt. Colonel Henry Blake - 1972-1983
An insert/organizer to hold all the components for Moon Colony Bloodbath. This works with sleeved or unsleeved cards. If you are using sleeved cards, print 1 of the card holder. The Tokens holders are designed to work in pairs, so each…
A simple toothbrush holder. Modification of Dutchcolonial's original design.
I made this stand for DavidBogaerts model from Thingiverse. His original file is X=63.51mm, Y=119.03mm, Z=45.17mm. I scaled it up 140%. I chose that size because I had a Cylon Raider model that I scaled up to 387%. I estimated the…
Hello, KFC's Colonel Sanders figure. Thanks for your download, enjoy the print!
Bras d'aspiration articulé pour perceuse à colonne. Conçu pour un tuyau d'aspiration standard de 35 mm. 2 possibilité pour fixer la base, 1 avec la pièce "socle 2" pour la fixer sur le bord de l'établi et 2 avec les pièces "demi cercle…
This is a case for Colonel Panic's OUI SPY that includes SMA antenna and USB socket holes. There is a built in channel under the OUI SPY for cable management. Use the included wedge to help secure the PCB in place. Everything fits best if…
Apocalypse Now - Colonel Walter E. Kurtz (Marlon Brando) - 1979 3D printable model.
This design is based off of: https://www.thingiverse.com/thing:4495280 I redesigned it to optimize for print time, material usage, and printability. For the base game, you will need to print out 3 shipyards and 2 colonies Category: Toys &…
Colonne courbe compatible OpenLOCK
Voron V0.2 Fridge Door / Colony Clacker Stealth Skirts 2.8" Waveshare screen as the tittle suggests, you are now out of breath reading it… lol but this is the Stealth Skirts option if you want to fit the Waveshare 2.8 inch screen to your…
This is a simple, interlocking card grid designed to neatly organize the "shipyard" and "colony" cards for the game Space Base. Unlike nearly all of my other game models, this one does NOT support sleeved cards. These can be used by…
The on-off switch is easy to accidentally push. I have pressed that little stick-out black button so many times by accident already. This puts walls around the switch, to prevent this. Put over the top of metal plate, using same screws.
For some reason the original owner of the house omitted a good 2" section of moulding from a wall panel in a dining room - and I couldn't find a place that sold the same type of trim. To make things worse, the margins were cut at a 45…
Still a bit of a work in progress, but overlay that should snugly fit around the planet ovals for the TM Colonies expansion. Print one first to see if sizing fits, and adjust accordingly by a percent up or down as needed.
Description: This 3D-printed model is an educational tool designed to illustrate the inner structure of an ant colony. Shaped like a foldable book, it opens to reveal the key chambers and tunnels typically found in a real ant nest. It's…
A cookie cutter for the Colonel rank (Army, Marines, Air Force) or Captain rank (Navy). Tall cutting edges and a thick/reinforced base for stability and ease of use. Print instructions Rafts: No Supports: No Resolution: 0.2 Infill: 20%
This is a replacement sear to reduce the trigger weight on the Colonel wasp 77. It needs 2 ZZ692 ball bearings, a M2x12 screw and a M2 nut. Greatly reduces the trigger weight, and makes the blaster a lot more nice to use.
was asked if I could print off a set of tags for the marines from the Aliens move and to my surprise I could not find a set to download so I created these. They are not movie accurate in there style but the information on each tag is…
These are some mods I made for the Colonel Wasp 76 AEB Nerf Blaster. Shroud & Dart Gate New barrel shroud with picatinny and a quick swap barrel collet. Hardware: 2x 016 o-rings, and some 4-40 or Nerf toy screws. REMEMBER: Lubricate the…
This is a shell catcher for the Colonel Wasp Firefly, to prevent the hassle of littering shells all over the field! The catcher is on a swivel to allow easy access to the breech and shell bag. Field tested and very reliable! I recommend…
Night light lithophane for Battlestar Galactica fans.
accion de gracias colona sexy con tarta de calabaza y cornucopia
I already own some real nixie clocks and so want to have a lixie looking and acting as similar as possible like the nixies. So, based on Folkers lixie digit, I created digit positions for colons and used an ESP8266-Module ESP-12E for…
Holds the 8 Trade Fleets from the Terraforming Mars Colonies expansion. I had a little space to spare in my Terraforming Mars setup, and the quest against plastic baggies drove me to make this. Holds them nice and tightly, but they pop…
If you have ever been in a Craftsman house, you might have noticed a feature called the colonnade. Colonnades are usually a pair of pillars mounted on plinths or bookshelves, that mark a division between two rooms, such as the entry and…
A simple holder for Colona sauces. This way, you will never need to shake it up! You can print a simple one, or up to 4 sauces holders. I can make more if needed.
No requiere soportes Altura de capa 0.2 con boquilla 0.4 3 colores necesarios, blanco, rojo y negro
Thicc skirts for the Micron 180 with a proper Colony Clacker door.
I designed small sections for floor trim. I find these useful for getting into tight spaces by doors and corners Printed in ovature Matte White PLA 0.15 layer height 0.40 nozzle
This is a stand for the Colonial Viper Mk 1 made by Al Mon. This stand is modeled in 66% scale to fit my smaller print. To print it for the original Viper, please scale up to 151.5%. Printed in PLA Viper Mk1 found here: Colonial Viper Mk…
🪖 Colonel Afterlife Meet Colonel Afterlife – the undead officer who’s seen it all... and then some. Whether he's leading spectral troops through the underworld or just keeping a close eye on your shelf, this grim and stylish bust is the…
A colone tester holder.
7/16" x 3" Colonial style baseboard moulding. Contains a blender file, so you can modify the length, or modify to match your use case. Modeled from…
This cupcake topper can be for a promotion to Major (yellow or gold filament) or to Lieutenant Colonel (silver filament). You can sharpie the top layer to add some pop or do a filament swap to black.
I designed this stand because the one from the Dutch Cylon was to big for my bookshelf and took up too much space. This unit includes a spot for the three recharge cylinders made by the Dutch Cylon as well. *******If you want one that…
American Standard handle adapter, model: M918021-0070A. This 18-teeth adapter can sit on top of a plastic cartridge, in which case it is secured to the stem of the cartridge with a 3/4" long #8 sheet metal screw. It can also sit on top a…
This insert includes: 2 Card organizers (inspired by @SoyUnBonus_1782397 at https://www.printables.com/model/843807-dead-of-winter-insert ) with 3 slots each, also including special slots for the combat tracker and the tactic cards 1…
English description (deutsch darunter) These parts are used to tidy up the colonies and uprising box, and there is then a place for all the material. All boxes are printed as shown in the picture, black, gray and in player color. The…
Public domain scene of a fictional palace interior by lucasassone . Originally uploaded to Blend Swap . I've extracted some of the solid useful elements from the scene. There are several more elements within the scene that could be…
Vintage Ethan Allen Nightstand by Baumritter Colonial in Playmobil Diorama Compatible Scale (1:24) & Dollhouse Scale (1:12) I laid it on it's back and used standard tree supports on build plate only to avoid additional support cleanup and…
Doesn't the trigger hurt your finger every time when you pull the trigger of your beloved firefly? This is a small mod for thickening the trigger, so that it won't hurt your finger anymore. Print guide Print vertically on the bed, apply…
[Updated Jul 31 2025] Added bin sizes 1x2 through 4x4 to the 1x1 Corrected bin shape to be stackable with factory tweaks to the large bin spacing - model is correct, but some printers may struggle with the small studs Looking into a…
A replacement dart gate for the colonel wasp 77 nerf blaster. Nothing fancy, just use if yours break
boquilla de 0.4mm - nozzle altura de capa de 0.28mm - layer height generador de perimetros arachne
Created this mod to keep my Micron style all in sync instead of exposing bare blind joints or using other covers that don't follow the Micron aesthetics.
These are boxes for the board game The Colonists. It's designed to be combined with this project: www.thingiverse.com/thing:1945649. (That project gives you trays and covers for buildings, hexes, resources, and the supply sheds. My copy,…
Have you ever taken plant cuttings, then left em lying in an ugly glass of water for weeks? Well no more! Instead, buy yourself a bunch of floral watering tubes and print out these columns to hold them. The columns interlock into a nice…
Witness the modular marvel as your colony ship gracefully transforms into a habitat building and nuclear reactor facility upon planetary touchdown. Navigate the challenges of space colonization, from resource management to forging cosmic…
These pumpgrips were desigend to be compatible with an auxiliary priming bar. Print 1x Spacer and 1x Pumpgirp. The spacer goes between auxiliary priming bar and the ram (see 2nd picture) BOM: 6x M3x8 2x M3x12 or M3x15 (both should work)…
Elegant two-story mansion inspired by classic American colonial architecture.
I am a big fan of DutchMogul's Pocket Tactics. I also use the hex tiles for making modular world maps for my players. Herein, you will find a bit of modular hex terrain for expanding your game of Pocket Tactics, or for making more…
Added a small hoop at the top so you can attach a chain. These will get used for an O-6 promotion ceremony.
Modeled after Borg pyramid colony ship from Star Trek Armada video game. Custom edit of model by Momir K. originally made in Sketchup. If you print in green and color with black marker it looks really cool. Feel free to check out my other…
Fairing Pin Reinforcement Collar Honda Transalp 650 - Collarino di rinforzo colonnina perno Carena Misura 42mm Transalp 650 Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx
Colonial Style Door Case Moulding 11/16" x 2-1/2" Contains a blender file, so you can modify the length, or modify to match your use case. Modeled from…
STL file is to 100% scale. If you'd like to make a scale model, feel free to resize it in the slicer. Wave Amplitude is not 100% accurate.
This remix is meant to accommodate storage for some lipped or other 3D printed player overlays. There is central storage for extra dice or cubes, as seen in my pictures. I printed in PLA, but it also works well with PETG. This is my first…
Colonial Style Door Case Moulding 11/16" x 2-1/4" Contains a blender file, so you can modify the length, or modify to match your use case. Modeled from…
Porte savon clipsable sur colonne de douche de Ø22 mm.
Pollinator Hotel Design This pollinator hotel is designed to provide an ideal environment for insect colonies that help with the pollination of garden plants. The smart and straightforward design includes three recycled cardboard tubes…
Colonial Cup and Ball Game, just add string.
Angepasste Version an die deutsche Ausgabe
A colony / military tiles holder for Hadara. Works well in the box, as well as put on the table for quick setup. The lid is optional and just there for some extra protection in the box. The lid is not a tight fit, just protective. Printed…
