612 modeli
UPDATE: New Card Stack uploaded (Update Card Stack closed) . Now little bit higher and closed walls on both sides. Updated Card Stack printed without support and much faster Finally i build a Card Tray that fits my needs. It holds up to…
This MTG EDH deck box is based on a number of other deck boxes already posted on other sites, however I have made drastic improvements of the overall design. I wanted a way to easily see which deck was which and have room for proxy…
A friend wanted to create this hilarious deckbox , but he couldn't find a food can with the required dimensions. So 3D printing saved the day! This deckbox is specifically designed to the dimensions of the label from the reddit post. It…
This is a remix of an older deckbox ive had saved. I reworked it to fit up to 110 standard sleeved cards, or 100 double sleeved cards, or about 100 proxied cards with real card backers. Ive added magnets to help hold the cover in the…
Commander deck box. Fits a double sleeved deck. Inside dimensions of 71x76mm and height 97 mm. Edges are slightly rounded and chamfered to help with fit. Print the lid at scale 100.5% for easier fit and 100% for a tight very secure fit.
Hey there, because i wasn't easily able to get the magnets Bmorr used, i remixed the design to use more standard round 5x2mm magnets. Yes, you can see them when the box is open. Yes, it will not be as strong as the original, but i can…
Little Green Army Men : Drone Commander : Robert ‘Magyar’ Brovdi
Deck box for MTG cards. Easily fits 100 single sleeved cards + some tokens. For double sleeved deck could be to small. Cover is a little loose so i would not recommend to throw it into the bag because it could open in transport.
This 3D printable deck box is designed specifically for Commander (EDH) players who want a durable and practical storage solution for their decks. The model is optimized to hold a full 100-card deck, including sleeved cards, ensuring a…
MTG Commander Deck Box 100+ sleeved cards. Default inner dimensions are: width 70, depth 65, height 93 mm but all can be adjusted. Parametrized Fusion360 file for easy adjustment included. MTG deck box for 100+ sleeved cards. Heavily…
Stackable deck boxes for Magic the Gathering, including: Commander deck box with a window to display your decks commander (or another card of your choice. Space for 100 card deck and 25 card side-deck (with sleeves) Standard deck box with…
Build instructions are identical to the original Rugged Box using same hardware. -Insert M3 bolts through bigger holes(outer) and thread into smaller holes(inner). -Latches are a single object. Use cut tool in slicer to separate them and…
Update There is a bigger version of this box with adjusted tolerances now! (As many comments suggested) You will get the more spacious version if you print every stl with a "+". I'd recommend printing the + version if you intend to double…
A deck box based on a design that I saw a few years ago but could never find it again. It's a simple deck box with no extra parts required and with the dovetail style lid, no disgusting plastic on plastic noise other deck boxes have.…
I made this model, because i couldnt find any deckbox that fits all my needs, and thought id share it with you all. It holds 100+ sealable doublesleeved cards, with a seperate room for tokens, i believe itll hold about 20 sleeved tokens.…
I loved the original dog tag so made a variation on the theme using the Hell Commander rank badge. Printed on a Bambu Lab P1S with the 0.08mm extra fine setting, iron top layers.
Step up your game with these visually enhanced deck cases, a creative remix of an existing design loved by TCG players. While the original functionality remains untouched, capable of holding over 100 sleeved cards with ease, it's the…
This is a remix of Gimpel's awesome expanding deck box with an unlocking movement. A slight twist of the top makes the six locking mechanisms slide out and release it. While I was building two of these, I made at least small tweaks to…
The deck box I remixed from is fantastic, but there were a few things I wasn't happy with. I also wanted to be able to fit the life counter inside the box. IMPORTANT: If you want to use magnets in the life counter, you need to set…
It holds 120+ standard-sized double-sleeved trading cards (i.e. Magic the Gathering or Pokemon) and includes dividers and an optional TPU seal. I seized the box based on Dragon Shield sleeves. No support or brimm required. Requires 6…
FEATURES Besides the eye-catching locking mechanism, there are also further features, wich make this deck box unique. There are two storage compartments for small dice or tokens . And the door also acts as command zone . Just slide your…
Do you like trash? Do you like raccoons? Do you want to feel like a trash panda when you pull out your deck? Then this is the deck box for you! Inspired by the raccoons of Bloomburrow, I designed this deck box for my wife and built her a…
This is my 1911 model. It is a solid (no moving parts) 1:1 scale model. You can of course scale it to whatever size you like in your slicer. You could scale it down for GI Joe if you wanted or make it full-scale for a costume or…
Saw a Commander Deck box posted to http://www.reddit.com/r/3DPrinting , but the original user deleted the post. Thus I took it upon myself to recreate it from scratch and adding in some neat things while I was at it. This is a deck holder…
This is my take on @Collingall 's version of the "Rugged Box (Parametric). Thanks for sharing the files - give them a like too: A slim and elegant deck box for Magic: The Gathering cards (or any other TCG with the same format). Fits…
Hi Darknight, this took many hours to complete because I've shifted premis and where we I am now the internet is dreadfull. Once finished these files were over 100mb + each and of course on damn near dial up speed, it was practically…
Created this deckbox to fit a 100 card sleeved commander deck, as well as 15 unsleeved tokens and a life counter. The walls are definitely thicker than they need to be, but as this was going in a backpack, I wanted to make it sturdy
Stackable deck box for Magic the Gathering. Commander deck box with a window to display your decks commander (or another card of your choice. Space for 100 card deck and 25 card side-deck (with sleeves) Dice-tray base that can hold dice,…
MTG Commander Box remixed from Ultimate Card Box v4, added commander card window, changed sizing to work best with single sleeved precons and added pins for non-magnetic mount. V4 alt: alternative hinge design that doesn't require any…
Based on the Rugged Parametric Box by Whity, i tweaked it to fit a sleeved 100 card commander deck (plus tokens). Split in half the cards fit nicely into each half and the commander can be in a top loader in the front "window". Requires…
If you like this model and it's not too much trouble, please hit the ❤ button - it helps out a lot 😀 This is an EDH/Commander tray. If you want something a bit smaller, check out the Compact Commander Tray ! This EDH tray can hold the…
Gyomeland M53R, a custom Magic: the Gathering Commander sized deck box. Inspired by the industrial kitchen ranges sold by Garland, this new and improved design features: Improved Oven Door, securing your 100 card Commander deck within.…
This deckbox is made of three main parts, which assemble by using 16 neodym magnets (6*3mm). UPDATE : Added some additional parts (window, top and front text panels), which can be glued (otherwise, you can try to paint the white parts of…
Commander Deck Box for Magic: The Gathering. On the front side you can insert an Art Card from the new boosters to customise the box (as in the previously published model for the normal deck). Alternatively, you can insert your commander…
I made this double-stack slim deckbox because I found standard single-stack deckboxes to be too bulky and wouldn't fit in my bag (this also happens to fit in larger pockets). I've also seen very little love for the art cards that…
I've tidied up this helmet and smoothed it where possible. I've added the extra ear piece and if you sand the nose a little, remove the visor and or change the mohawks around you could theretically change it to any model Clone Trooper you…
This deckbox is for EDH/Commander Magic the Gathering decks and can hold 100 double sleeved cards plus some extra. It has a slot for a thick toploader sleeve in the front. Best way to open it is to push the top forward from behind, see…
Dart holder for upper tactical rail on Elite 2.0 Commander. Might fit other models also, I designed and tested it on the mentioned model only. Držák šipek pro horní taktickou lištu na Elite 2.0 Commander.Může pasovat i na jiné modely,…
29. Dec. 2023 Improved the hand for easier printing Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 Get your Dummy 13 here: /model/593185 DUMMY 13 loves COMIC CON!…
Originally hosted at https://www.thingiverse.com/thing:5754524 by myself. This is a deck box for trading card games. It was designed specifically for the Commander format of Magic the Gathering. It fits 100 cards with a little room for…
The current logo of the former Washington Redskins / Football Team and now the Washington Commanders
This two-part shell-style deck box is designed to keep your MTG Commander deck safe and organized. It fits 100 double-sleeved cards , plus a token compartment , making it perfect for EDH players who want a reliable and functional storage…
This is a modified version of the original deck box to fit Ultra Pro 3" x 4" top loader card protector for the commander card and slightly increased in size to accommodate Dragon Shield Matte sleeves for the rest of the deck. The…
This is the PLA commander. i have a reg and am working on a heavy soldier, sniper/specialist soldier and a scout if you have any more cool guys you would like me to make tell me and i will look into your idea!
A MTG deckbox capable of holding up to 8x 100 card commander decks (sleeved). The last two slots are also designed to hold accessories for play (i.e. tokens, spindowns, dice, etc.). The model consists of two parts a lid and the body. The…
A fairly basic MTG Commander deckbox, featuring: A twist-lock top, turning the MTG logo will open the grippers, allowing the lid to be removed. The grippers close automatically thanks to the spring. Nicely fits 100 sleeved MTG cards…
An old file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model,…
osVAC conversion adapters for Dust Commander cyclone dust separator. With these adapters you can attach osVAC hoses directly to the Dust Commander. Also check out my osVAC pressure relief valve adapter. The female connector uses my osVAC…
This counter helps a lot when playing Magic the Gathering COMMANDER variant. It is made for D20 dice to keep track of your neccessary values in the game. Of course you can change the dice colors matching your own preferences. We choosed…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
2 versions of files are included: pre-supported and unsupported. All parts have been prepared and tested for 3D printing. We recommend to print in resin. Details The 2nd Death Division commander with 4 interchangeable right hands…
A six dart rail mounted magazine for (e.g.) the NERF Commander with its six shot revolver design. I added two extra ammo slots to the model by Oliver Boesch using Bambu Slicer (#workaround). I first tried it using Tinkercad, but the…
This is a slim deck box for a double-sleeved Commander deck that fits in a jeans pocket. It has a window for your Commander, which is sleeved in a CardCover Toploader from Ultimate Guard. It also has space for 20 tokens (10 per side). In…
A remix of @DocKuro 's great model. A Magic: The Gathering Commander deck box with token tray and resized the window to accommodate a Commander card in a top loader. I also removed one of the dividers in the token card area to create a…
Commander Deck Box Designed in Onshape
This box fits 100 double sleeved cards. In addition there are compartments to store tokens and small dice and a command stand. In case you don't need the commander stand, you can also print a version without it (B1 (no commander stand)).…
fallout inspired Vault-Tec supply box for magic the gathering commander deck or other card games. This box should fit sleeved deck of little more than 100 card in main area and tokens in side area, Top will fit full set of dice. use 5mm x…
This is remixed from another commander deck box. I like the original model but needed to make some modifications for my purposes. The primary motivation for this remix was adding a larger commander slot to accommodate larger slide card…
These mods are designed to improve the accessibility of regular Nerf Elite Commander 2.0. Once I noticed that my son was having a hard time reloading the Nerf gun because the regular charging handle was a bit too tight and the grip was…
I wanted to try my hand at a deck box for Magic: The Gathering which would fit a regular single-sleeved 100-card Commander deck as well as common extras like tokens and the precon life wheel, but with a twist: the front of the box should…
Commander deckbox designed to hold 100 double sleeved cards, with a side compartment for tokens or dice. Features of this deck box include: A securely fitting lid with detent to hold it in place. Interchangeable insert on the front for…
Originally hosted at https://www.thingiverse.com/thing:5215344 by myself. This is a deck box for trading card games. It was designed specifically for the Commander format of Magic the Gathering. It fits 100 cards with a little room for…
Magnetic Toploader Deckbox Hello, this is my custom deckbox design that I use to store and transport my commander decks! My goals while making it were: to not be much wider than your typical deckbox a strong magnetic lid that would be…
Magic the Gathering Flatpack Commander Deck Stand/Holder After printing and using other Commander Deck Holders, I ended up with a wish list of features. Number one on that list was to make it easier to pack, travel with, and store away .…
This Commander deck box is sized for 100 double sleeved cards with some extra space for tokens. It can be assembled with an extra compartment at the bottom for dice and other small accessories. This design is a base for my other deck box…
I wanted to expand on the excellent Rugged Commander Deck Box by making an Assassin's Creed themed build, in honor of the new set of Magic cards. I used white and red Hatchbox PETG, and I printed using a 0.4 mm nozzle, 0.2mm thick layer…
A very basic deck box for storing your Magic the Gathering Commander decks. It holds 100 cards double sleeved in Dragon Shield inner and outer sleeves with a little room to spare for tokens. When printed with 15% infill, it takes about…
I've seen multiple versions of this plate but it never QUITE matches what I want out of the plates. They try to do too much or aren't done just well enough for my organizational requirements. I decided to make my own versions of these and…
This 3D Model is NOT stretched out. it is resized varibles and face-shifting in onshape. If you would like a different Width dimension, please leave a comment. I am currently working on a way to adjust the height and depth as well. For…
An imperial Purge trooper version of commander cody's helmet Separated visor version for easier painting. Feel free to use/modify/sell prints along as you credit me and link back to here. Just don't sell the file.
After having some other 3d printed deck boxes fail on me after using them for a while, I decided to make one that should hopefully hold up to extensive use. The space for cards is roughly the same as an Ultra Pro Satin Tower, and the…
As my first foray into complex 3D design, I created a custom deck box to house my “Gyome, Master Chef” Commander Deck for Magic: The Gathering. Modeled in Fusion 360, based on the Garland M43FTR restaurant-grade range. Features: Main oven…
This commander sized deckbox will keep your cards safe in your bag or serve as a standalone box fit for a day at the convention hall. Designed with durability in mind, the main compartment is sized for double sleeved cards and an…
Simple MTG Deck Box. Enough room for a 100 card commander deck. Can also be used for normal 60 card deck as well. There are 3 models: No Logo All land logos MTG logo
Magnetic latch - requires two 10x2 mm magnets
As promised, more G.I. Joe characters. Cobra Commander is another one of my favorites and I had a lot of fun making this remix. On top of downloading all of my files, you will need to download mini13-armor-foot-2x.stl as well as a full…
Use this cyclone dust separator to collect large amounts of dust (e.g. sawdust) in a bucket while keeping your vacuum filter clean. Very helpful in a workshop! The idea is that particles are sucked into the cone, get slowed down by…
This is an update to a previous model I made Magic the Gathering Deckbox 6-8 EDH/Commander Decks . The previous model was too large for most buildplates and required extra hardware to assemble. This new version, while holding only 6…
This is a hexagonal shaped magic the gathering commander deck box, based on the mechanical movement nr. 221. If you turn the top in the right direction it unlocks and enables you to slide the side door up, so you can reach your cards.…
Modular MTG EDH box. It is designed to attach to another box for easy organizing and carrying. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 15-20 Notes: Ender 3 V2 Post-Printing 2…
This is a deck box for a Magic: The Gathering Commander deck. It has a commander compartment, a small compartment for token / accessory cards, and a larger compartment that easily fits 99 single-sleeved cards. The box has a lip on top and…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, buying me a coffee would be a wonderful show of support! Good quality designs take time, effort, and CAFFEINE! ;-) And then check out my other models for…
This was an 18h print at 0.2mm layer hight. No supports. I printed v_1.1 and have made minor adjustments to the v_1.2 (spot differences from photos to model). Will need make additional refinements. Like the second tone fillers are way too…
Lightweight commander box that can showcase the commander card, with a lid to close the box. Can holds 100 sleeved cards or 100 sleeved proxies.
Doom-styled SVG files that inspired the build are included. I added them as modifiers for MMU printing. Recommended settings for single-extruder MMU are here on this remix of the Parametric Rugged Box:…
This is a remake of a vintage template produced in Poland in the '70s by the Tracing Instruments Manufacturing Facility in Paczków. I got mine from my grandpa, and it was a ton of fun back in the day. I’m pretty sure at least half of…
A pressure relief valve is a handy addon that prevents your cyclone dust extractor system from imploding or collapsing, if the hose is blocked e.g. by too much dust or debris. This is a mount for the pressure relief valve from Dust…
Deckbox can hold 100 double sleeved cards + some tokens. This model doesn't need any supports, just print it orienting the back side in the printing bed. Printed using an Ender 3 V3 SE. 0.4mm nozzle with PLA Deckbox accepts toploaders…
sword was remixed from a everything model i can no longer find the upload fore sorry, Note the thickness of the belt boxes have been thinned down since the photo was taken they wont look as bulky Feel free to use/modify/sell prints along…
To see the build video of how I made this design please see my YouTube video added below or visit my channel @froooch I added a dice caddy that can be stored in the box over your deck or be attached to the top of the box during play. The…
I have made "TheJackall"'s MTG Commander Box with Commander Display a bit sturdier. After printing and using a number of these I found all had the top break and the lid would not stay on any longer. I restructured the sides and top to be…
Comfortably fits dragonshield or similar sleeves, and has the height to fit penny sleeves that I use for my tokens. When taking the lid off, grip both sides of the lid and pull up one side at an angle for the easiest time opening. Before…
Refer to all instructions and tips @kwfredeen posted (the model this was remixed from). These magnets are expensive but hold MUCH better than random cheap amazon ones, and fit perfectly:…
Rank Badges for the purple upper levels! Check out my other badges For the whole set! I’m putting together a display for them too. Printed at 25%
A mighty hero cares not for ranks, but only for glory. Supports required. Scalable. Tree Supports on build plate only (shown at 150mm high scale vs 75mm) Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
120card deckbox for sleeved cards U WILL NEED 5mmx2.7MM magnets
![MTG Commander Box [v4]](https://media.printables.com/media/prints/763363/images/7385852_1280f58f-c9b3-4784-817b-a23507d46db4_b0e39541-7345-41a5-abb9-10860e449896/img_20240808_095036.jpg)
