Cricut Maker Tool Box Organizer
This is an insert for the Cricut Maker tray that helps you organize your tools.
Wydruk około 6,23 €–7,61 € nettoWstępna wycena jednego wariantu
- Pobrania
- 2633
- Polubienia
- 462
- Ocena
- 4,96
423 modeli
This is an insert for the Cricut Maker tray that helps you organize your tools.
Wydruk około 6,23 €–7,61 € nettoWstępna wycena jednego wariantu
Prints PETG in 0.2mm layer height with no supports, a 5mm brim around adapter helps with bed adhesion. This is suitable for use with Stabilo 0.4mm fine pens. Print upright with thin part of the adapter touching the build plate. No…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Are you the owner of an insect-eating pet in your living room terrarium? Has it happened to you that insect food successfully escapes its digestor and makes it loudly apparent? You may have tried to trap him and end his loud preludes, but…
Wydruk około 0,05 €–0,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Pretty basic adapter to fit Posca pens in the cricut pen holders.
Wydruk około 0,30 €–0,36 € nettoWstępna wycena jednego wariantu
Hello, I propose a clamp for the GLITTER GEL CRICUT JOY pen to be mounted on your CRICUT MAKER 3. To be printed without support with a raft. Good print !
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
The Noisy Cricket (Mini Gaming Keyboard) A minimal keyboard with just the basic keys for gaming on the go. Mostly targeted at FPS games with a focus on W A S D . The layout can be customized via the QMK firmware. The default layout looks…
Wydruk około 0,86 €–1,06 € nettoWstępna wycena jednego wariantu
This is a scale replica of a cricket bat. Can be used in outdoor cricket games, although it will break if you use it with a real ball. Recommended use with plastic ball. Print with detail, and sanding and paint are recommended for a…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena jednego wariantu
Tool organizer for Cricut Maker Print instructions Tool organizer for Cricut Maker. Store your cutting tips inside your Cricut Maker. Printed in silk pink PLA. There is also a split version of the model for printers with smaller beds. No…
Universal pen adapter for the Cricut maker 3. Includes pen distance tool. works with anything up to the thickness of a sharpie. Pen distance tool rest/snaps on to the rail allowing you set a 3mm distance.
Had to print using 2mm raft to stick on build plate. Print with thicker side of the model upward shown in photo, no supports needed. May require some strands to be cleaned up when done printing. You can find adapters on Amazon but why not…
Prints PETG in 0.2mm layer height with no supports, a 5mm brim around adapter helps with bed adhesion. This is suitable for use with Sharpie fine point pens. Print upright with thin part of the adapter touching the build plate. No…
Mat Extension for the Cricut Explore Air 2 which can be disassembled and stashed in the right hand drawer. The handle itself should be rotated by 90° up when inserting it into the door recess and then by 90° down again so that it sticks…
Updates 2020-01-01: Several people have asked for smaller versions of this which will fit on slightly smaller print beds. I have uploaded two additional "mid size" versions. One has no cup on the end, the other has one less tool slot. The…
I designed this to fit onto the door of my wifes Cricut maker so the mat doesnt flex when moving in and out. This is designed for the 12x12" mat, but i also have a design for the 12x24" mat also. i printed mine with split colours so its…
This is an extension to clip onto the front of the Cricut Maker to add support for the longer 24" mat. Category: Parts
Keinen Bock slebst zu drucken? Kauf ihn hier in PETG! - bei Etsy….
Needed a way to hold the small Cricut vinyl rolls. Expand as big as needed.
Jiminy Cricket, the Walt Disney version of the "Talking Cricket", a fictional character created by Italian writer Carlo Collodi for his 1883 children's book The Adventures of Pinocchio. Jiminy was originally an unnamed, minor character in…
Printed it upside-down for a good top finish. Had to use supports and do quite some sanding for the bracket to be smooth. Recommending PLA as it is easy to post-process.
This is based on the official Cricut scraping tool, however I didn't like the design so I made something more fitting for a guy. The edge is chamfered to ensure that it touches the surface evenly. The size of the model is 3.5"L x 3.5"H,…
I've messed around with a new cad/modelling software and just ended up with a pistol somehow… Hardware needed: A bit of 4mm bungee and maybe some tape for the bungee where it interfaces with the lever to avoid too much flex Assembly, put…
My wife asked me for an organizer for all of her Cricut tools. So I made this in Tinkercad and then cleaned it up a little in Blender. V1 is the original file from Tinkercad V2 is after cleaned it up and beveled the edges in Blender.…
I adapted Heleplanchiste's Trayextension to make a roll holder for Cricut Smart Vinyl. It is printed in two parts - left side and right side. If you flip the model onto its end, it can be printed without supports. Printed in PLA at .20…
Das ist ein Halter für die Matten von meinem Plotter. In der Mitte befindet sich ein Loch um es mit einer Schraube zu befestigen. Ich habe das PLA+ mit 205 Grad und 65 Grad gedruckt. Die Ecken sind abgerundet und passen sich super an.
Hi everyone! This is my first published model and it is a V1. My wife wanted something to hold her cups and tumblers while applying vinyl or etching. There are some commercial options but they are expensive and then the other 3D models I…
Update: Jan 19th - Got rid of the aligner tabs, they served no major benefit to the design and overlaps should be more than sufficient. Modular wall mounted vinyl/rolls storage for Cricut, Scisor or any other brand. Print only the Top and…
Remixed the original, because my wives name is different :)
Full tutorial: https://learn.adafruit.com/crickit-lab-shaker/ Build a lab shaker to agitate parts with PVA supports! This DIY shaker uses an Adafruit Crickit, Circuit Playground Express and DC motor. The speed is adjustable with a…
Cricut Pen holder for Sharpie. Extra fine has been tested, Fine is still under development. It should be adaptable for most pens. Check out the spreadsheet in the Freecad source. Print .2mm layer height, no supports. Flip it so that the…
I was getting frustrated with my mat constantly flopping onto the floor before/after cuts, so I made these extensions to bump out the tray just enough to support a standard 12x12 cutting mat. You can print and many or as wide of clips as…
Cricut Tool Organizer This is an organizational system for the Cricut paper / vinyl cutting system. The Cricut uses different blades and rollers and such for cutting different materials. For a given project, you rarely need more than one…
Lucky 13 Cricket bat If you like it --> press like it :-) Cricket bat for the funny lucky 13 figure. The katana model is from kh4rj0 . Take a look at my models, there you can find some more equipment for lucky 13. Would be happy to see…
Cricut maker 3 pen holders for: Sharpie fine point Sharpie ultra fine point IKEA MÅLA pen + Blank holders allow you to create your own custom pen holders. Added dummy cutting tool blank to avoid annoying rattle when cutting tool holder is…
Noisy Cricket From Men in Black.
I needed a set of legs to raise my Cricut Explore Air 2 high enough to allow my cricut joy to fit underneath so i designed these. they use the original screws that hold the rubber feet in place. I printed them in PLA with 5 walls and 10%…
Ikea Skadis Cricut Tool Holder Remix
Also in the READ ME.txt file: This version of the Cricket has a slightly larger grip, modified lever with better handles, and a redesigned receiver that allows for low power or high power shots, depending on the elastic draw length. It…
The Sharpie Fine markers will fit in the Cricut Joy, but the rim is different from the original markers. With this adapter you can use your Sharpie on the Joy without problems. Incl. Fusion360 file
Found this plan, print it and found there was some room for improvement, so I made my own one base on the general idea of it. The main improvement is that you can place this tray in the hole in the middle of the original part of the…
The original design (https://www.thingiverse.com/thing:5322891/) has the arms tilting up, I rotated the clip part down 10 degrees so the support arm is parallel to the cricut's platform. Extendable Design allows better support for a 24…
print horizontally / laying down for best stabilty and tight fitting pen
Each stack can contain 14 Cricut pens. I used PLA in 0.3 draft mode with my MK3S.
Permet le rangement des pointes à transfert de foil de la Cricut MAKER3. Je joint le STL afin de laisser les makers le modifier à leur guise et en faire profiter ainsi les autres user.
Cricut's $30 brayer is a scam, so I cloned it. This design requires 2x M4x12 bolts, 2x nuts, and 2 608 Ball Bearings This can be used as is or you can buy/glue $.99 foam paper from a craft store to the roller for a truer clone of Cricut's…
I designed this pen holder for my mom since she did not want to buy a pen organizer and any cricut design she found did not have a holder for all the pens she has, this will make sure she has more than enough room for extra or different…
Yes you can find dedicated furniture for your CriCut machine, but we have a 3d printer for many reasons including the “I'll do it myself”. So here it is, a simple idea to raise your Maker (or Maker3) from the table and have room to store…
Minor alterations to OEM part, to make the arms a little stronger. Took me 5 versions before it fit and functioned well. Tested on Circut Explore Air 2.
I like keeping my xacto knife and other pens in the larger side and I didn't have that many tools so I made it to fit the middle part. hope this is useful to some.
This is the perfect case to store your cricut tools.
Small hanger to fix with a very small nails on the side of a Bror Ikea table to hang all the different cutting mate for the Cricut Maker 3. If using the STL file, print it on the side. No need for support, but I recommend to add brim. If…
Radboudumc Cric & Trach model. This 3Dlab Radboudumc Cric & Trach model is developed by the departments of Anesthesiology Radboudumc and 3D lab Radboudumc, Nijmegen, the Netherlands. (Bruijstens, Loonen). The file and model are developed…
A quickly made holder to store Cricut cutting mats under a table surface. Holds the standard sized 36mm x 33mm mats. I'm sure there is room for improvement (especially the centre joint), so included the STEP files for you to play with.…
I had a problem with the original model - the weakest lip peeled off once I put it on Cricut. - Print on a side for improved strength, use rafts to avoid model warping. - Hole for pegboard
A simple clip for holding material rolls that I designed for my wife to use with her Cricut materials. I'm assuming the size is standard for other manufacturers as the Siser rolls also fit well with this. Print with a 0.4 Nozzle at 0.20mm…
I wanted to bag a disc at tournaments that I made , so I started the process of designing a putter that was fairly stable, but could handle some anhyzer/flex. During the design process I realized the disc also floats in water pretty…
I cut a lot of paper models on the Cricut Maker and I'm constantly changing between the scoring tool and the cutting tool. Putting the unused tool inside the pocket makes it hard to grab, and if it put on the desk when things are messy it…
Adapter for the Cricut Joy to use the Stabilo point88 pens. This prints without support, just remove the sacrificial layer with an Allenkey or with a 6mm drill (just poke it).
A remix of https://www.thingiverse.com/thing:3446829/files and https://www.thingiverse.com/thing:2751867/files IKEA SKÅDIS Cricut Mat Hook Reworked V2 20.05.2025: Print-in-place design : Enhances stability by using a single solid part.…
Untested. Print at your own discretion.
Add the ability to use Sharpie pens with your Cricut! Tested with the Maker, should work with other models too. Prints well with PLA, works well with the 'Avoid crossing perimeters' setting to ensure there's no stringing. I tried Martin…
Universal pen holder for Cricut Explore Air 2. The model has space for an M4 screw-nut. Make sure adding a stop at the right layer height to your gcode to put the nut into the space before the layer is closed . I have used an 16mm screw.…
Chevre moteur ou cric pour les diorama 1/64 ou hotwheels support nécessaire à l'impression
this is an adapter to use Stabilo pens in a Cricut Joy plotter/cutter Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.1 Infill: 15 % Filament: does not matter PLA does not matter Notes: I used…
Adaptor to allow for use of Gelly Roll gel pens with the Cricut Joy. Due to the diameter of the pen relative to the Cricut joy tool holder, there's not a lot of room, and a part of this piece prints with just a single perimeter. I found…
utilisez les options dans prusaSlicer, echelle et diviser en objet, pour mettre en place sur votre plateau.
This is an adapter for a normal Sharpie (Fine Point). This will work in a Cricut Explore 3 ( or probably any Cricut Explore version ). Print takes about 10 minutes and doesn't require supports. I printed mine in Hatchbox Black PLA.
Needed to write with a pilot G2 instead of the Cricut Pens. Hope this comes in handy for someone. You need to cut the grip off for it to fit.
After trying out a couple of adapters here, I decided to venture out on my own. The simple version seemed best. I've included the two files for Fine Sharpie pens and Ultra Fine pens, but there are instructions on how to alter the F3D file…
Case for Cricut tools. The inner part of the original Cricut Tool Case with a solid bottom for printing faster with no supports needed.
On my Cricut Explorer Air my 12x12 mat was always flopping down while it was going back and forth while cutting. I designed this to help keep it stay in a straight plane while printing etc. Hopefully when i have some more time on my hands…
UPDATE: 4/2023 Added a new model with a small radius on each edge. I tried to add a gcode file that has the part oriented to minimize supports, but it doesn't like a line in the code from bambu slicer. Check out the screenshot for a…
I needed more room to store my tools with my machine, so I threw this together. I had a few revisions, but I think this one does the trick enough for me. Just slides into the built in storage slots and hangs off the edge.
Remixed to fit 55mm vinyl rolls from cricut. Also made it to hold 6 rather than 4.
It should work with most of the modern European gas cabinets.
designed an adapter to use the cricut joy infusible ink pens, i bought by mistake, in my cricut explore air2. Print instructions print it without supports
Make 2 faces and 6 holder to hold the all
A simple mount for your Cricut power adapter that allows the power brick to be easily slid in and out. Mounts can be adhered using double-sided tape or screwed in using provided holes. Parts are leabeled “L” and “R” for left and right…
01.30.2025 Update - Changed license to full Public Domain. Share, Sell, and make freely! Cricothyrotomy Unlimited Trainer or C.U.T. for short, Hospitals or medical facilities who need to keep their staff proficient, can easily go through…
i've print all the model using PLA 0.3 draft for faster printing. I've design the model to work with the hook on the drippy container model.
This is a great way to store your rolls of materials for Cricut and other machines. Print in pairs and then glue them together to create a fantastic honeycomb storage solution. This is also a great way to use up scrap rolls of filament.
Little container for CriCut blades (Maker 3) No extra parts needeed To buy blades i recomend: https://s.click.aliexpress.com/e/_oEYKBCK https://s.click.aliexpress.com/e/_oEYKBCK Deep Cut: https://s.click.aliexpress.com/e/_ooMSkxy
I made this up for my wife to hang her Cricut mats on the wall when not in use. It's designed to use a command medium strip. 15/11/2018 Uploaded a new version with rounded edges. Print Settings Printer Brand: Anycubic Printer: Semi-closed…
The quest 3 controller doesn't track well when attached to the IBCricket Bat's default adapter since the bat covers the controller occluding the sensors from VR goggles. The model adapter moves the controller to the backside of the bat…
Large printer (15ct.) and small printer (12ct) Vinyl Roll holder no supports needed. Recommend using a brim and no support are needed for this print for Ender 3 and similar size print beds I added a 12 hole file for smaller print volume.
use this print so you can use your Pigma Micron markers in the Cricut Joy Plotter. I used 100% infill, but less will do I guess
i remixed this to hold scissors and a squeegee and more tools and changed the cutter tool holders to a simpler design lessening the amount of filament and time to print and also they need no supports. i added a cameo logo holder and a…
Out feed extensions for Cricut Maker 3. The brace in the middle is a super snug fit -- depending on how accurate your printer prints it may need to be sanded a bit. Print Settings Printer Brand: Creality Printer: Ender 3 Supports: No…
Simple and thin (1.67mm walls) vertical holder for a Cricut Maker power brick. Included file is parametric so it could be used for other sizes of power supply but the 3mf file will give you a quick print to get organized. Printed mine…
Uploaded from Thingiverse from gschappelle.
A model for holding Cricut pens upside down so the ink stays at the tip.
Its a model of T20 Cricket world Cup 2024. Inspired from the original trophy
Needed a way to store vinyl rolls on a pegboard, this is it.
If you already have the container from Uko printed, you just have to print the new Top version. Do you own a Cricut or any other similar machine? Well then you're familiar with weeding and know how annoying it is to always have to clean…
This is a Cricut Maker mat support I made to keep the mat from drooping, causing my material to occasionally lift off. Printed (upside down) with support only on the Left side, 20% infill, PETG preferably, but PLA will work. Sized to fit…
Skadis hanging organizer for the Cricut tool set Print with the pegs parallel to the print surface with supports for maximum strength. Tools aren't heavy so it should hold up in any print orientation though. Requires 2 T-clips that can be…
My wife loves her CricutMaker and has a bunch of different heads/accessories, so I designed and 3D printed a custom accessory holder, specific to her setup. Holds six cricut accessory heads, plus some of the new #QuickSwap heads. I've…
This is a modified version of the "CICO Rescue Cricothyroidotomy Trainer - Vortex Approach" by drandybuck... https://www.thingiverse.com/thing:2530474 As per my comments in the original part, I've modified it to make it easier to print...…