161 modeli
This is a dashboard mount for Fanatec's CSL DD wheel base along with a Google Pixel 6a. Feel free to tinker with the provided .ipt file (Autodesk Inventor or Fusion 360) or even send me your smartphone model and I'll gladly modify the…
If you have long legs like me, the only way you can get the correct foot position using the Fanatic CSL Pedals is to have them hang off your racing stand! This leaves just 2 m6 bolts holding the pedals on! Use these legs to support your…
Bigger foot support for the CSL Cockpit from Fanatec.
You need 1x screw m5x15 1x screw nut m5 Print base with suport.
Mounting solution for the Boost Kit 180 (8nm) power brick for the Fanatec CSL DD & DD PRO to Series 15 & 40 aluminum extrusion with M8 bolts and t-nuts. Print two mounts The Series 15 that I modeled the mounting to is from tnutz.com and…
As I've not liked the short travel of the brake pedal, I've created an elastomer replacement. I've printed it in different hardness TPUs with 4 perimeters and different infills with a 0.4mm nozzle and replaced two of the original…
Simple Pedal Mod for CSL Pedals. (TPU for sound damper required) Review of this mod: Thanks to Sim Racing Corner You need 4x M6 60mm Bolts and 4x M6 Nuts and a set of RC Car Damper with 140mm length like these:…
Measured up an original CSL DD t slot nut and modelled one with a home for a m6 nut and an extra 1mm in the "T" for strength Works well. For strength which this needs I print with 4 walls. Managed to give it some stress lines so v2 moves…
My mod is greatly inspired by some commercially available one but I've modeled it myself from the ground up and took the liberty of adjusting it to my liking. This mod will make the braking more linear and less stiff overall which is what…
Holes a 4mm wide You will need a 4mm bolt and nuts. Bolt should be 20mm long as the pieces when assembled are 15mm thick. Should look amazing if resin printed. Enjoy!!
Fanatec CSL Brake and Gas pedal
Made a simple mount to add the Dayton Audio TT25 Pucks to the CSL Accelerator and Load Cell Brake pedals(probably works on other pedals as well). The mount uses the original bolts and has just enough thread to hold the mounts and pedals.…
Phone holder 100% customized to MY PHONE and its protective shell. I can't guarantee compatibility with your phones, but this can serve as a basis for adapting this system to your phones.
Fanatec DD Pro / CSL DD mounting adapter for 8° tilt. With this mounting adapter the wheelbase can be mounted at a 8° tilt for a more comfortable use of the wheel. Designed for Marada and similar racing frames, but can also be used to…
fanatec csl dd base shaft cover used with metallic QR serves to cover the shaft and eliminate bending motion
Universal Playseat Challenge Fanatec Pedals Mounts After breaking the existing pedal mounts I found on Thingiverse I decided to design my own that would both be more durable and more versatile. This universal mount allows you to affix…
Description Sim racing is cool, but gear is expensive. That's why I try to get the most out of the most affordable stuff and build up my rig this way. Simagic has a relatively open ecosystem and provides the P-HPR force-feedback…
Fanatec CSL Pedals Pedal Plate Plug and Play with Fanatec Logo and F1 Logo. Multicolor printed on Bambu X1C
Remix of arbornoctis' excellent model. I redesigned the mount in Fusion 360 to fit my iPhone XS. Added slots on both ends for charging in any orientation while in the mount. Printed upright with: Extrudr NX2 PLA Black 0.3 mm layer height…
Remix della Dash di Wotever per VoCore 5" (Micro USB) e 4" (Micro USB) Diviso in tre sezioni: Front per chiusura Middle ospita il display Back ospita il collegamento Usb e tutti i dadi a fusione (M3 e M5) per viti di chiusura (M3x20) e…
Basically the same as the original model, just added grooves for gluing hose flat sealings ¾" DN20 30x20x2 to add grip. As the original one, this one also requires two Bessey TK6 60/22 table clamps and 3x 16mm M6 socket head cap screws.…
This is remix/heavily inspired (and redrawed from scratch) of @JoseJacobUK_230742 model for two reasons - original model didn't perfectly fit on P1 V2 wheel and its STL has errors (unable to import). Although original caps and stickers…
Orient print with logo on the side, supports not required. I used 30% Infill, but with 3 walls 20% should be fine. The holes are made to work with M6 socket cap screws which also hold the brick in place. If you've seen this print for sale…
These mounts allow the Dayton Audio TT25 transducer (bass shakers) to be mounted to the Fanatec CSL pedals. There is a separate model for the accelerator and brake pedal. The mount is secured to the TT25 via M3x15 bolts and then the…
Elevate your racing experience with this Magnetic Shifter MOD designed to enhance the shifting feel on the Fanatec CSL P1 V2 steering wheel. Say goodbye to spongy shifts and embrace a more precise, binary sensation with this custom…
I wasn't happy with the stock foam in the CSL Brake, as it was extremely soft and made the pedals feel too linear. Printed with 5 Walls, 5 Top and Bottom Layer, 25% Gyroid Infill with a 6mm nozzle. I only use the biggest insert and it is…
A mount to fastening Dayton bass shakers to Fanatec csl elite v2 pedals. May or may not print with support. Mount with zip tie. I use the mounting bracket shipped with the shakers, but might work without. *Updated version from the one…
Support for Fanatec CSL DD used for 40x80 aluminum profiles sim rig. No supports are required. M6 bolts for securing the CSL DD and M8 bolts for the 40x80 profiles.
I wanted bigger buttons for my CSL elite P1 wheel like those on my Clubsport F1 when the caps are on so I designed and made new ones. These should also fit the WRC and BMW wheel which replaced the P1 in 2021 These replace the stock…
Took shoggot's remix of pseudoku design and turned it into a 3D printing service friendly version. These are MX spaced choc keycaps. Please note that if the material you use shrinks after printing, you may have to add tiny strips of…
BMW M3 E46 CSL Wall Art Silhouette model. Adjustable size. I accept model suggestions.
There were some mods for Fanatec CSL WRC Wheel, such as this from Thingiverse https://www.thingiverse.com/thing:4807028 or one from Sim Racing Addict https://www.youtube.com/watch?v=T6PnI21wbo4, but they are all very troublesome to use,…
Shaft support can be FDM 3d printed. I'd not FDM print the shaft, too brittle. The shaft in the picture is made out of Formslab Tough 2000 resin (tested, pretty strong). From my tests, it would do the job fine but I will be replacing it…
This model is heavily inspired by the version from Sim Racing Addict, i designed it myself so it's probably not that refined. So if you have the money rather buy the Sim Racing Addict version if you can. You are free to improve the model…
Side bracket for 40x40mm aluminum profiles for Fanatec Clubsport DD Pro / CLS DD / DD or DD+ Wheel Base's. The model is available for free download and use. If you still want to invite me for a coffee for my effort, troubles and time or…
This is my take on a base clamp for Fanatec. My desk has a quite a bit of depth, therefore, when using the wheel with the normal base clamp the wheel is hanging out too much off the table (see photos for comparison). With this design…
Super easy print, if your rubber damper for the CSL Elite is broken due to hard use. Change the infill to increase or reduce stiffness, I like it at 50%, I found 25% is too soft for me but that is my personal preference. Print settings:…
I created a heel support to replace the original cover in order to prevent my feet from sliding while using the pedals. There are two different versions : one without mounting holes and the other with two 9mm holes for bolting it down. I…
I just make the pedals wider, longer and as thick as the original CSL pedals with pre made holes for brass screw inserts to use the original screws or M4 screws. Brake pedal 3d model use for clutch
When printing the base increase the wall count until there are no holes/infill between the bearing hole and edge. I used 35% gyroid infill. When printing the arms use the orientation like in the 4th image and set wall count very high…
Wanted to create a compact mount that didnt require additional hardware. This uses the original screws that came with the shaker puck (originally used to mount to the adapter ring). Two zip ties are used to secure it to the pedal. It's a…
Orient print with logo on the side, supports not required. If using 3 walls, 20% infill should suffice but I used 30%. M6 screws should be socket cap to aid in keeping the brick from sliding out the ends. If you've seen this print for…
The heel stops can be attached using the standard screws. Model has been split in 2 in order to fit on most print beds. It's advice to print these with extra walls especially around the screw holes. - Example print done with the Bambu…
Die beiden Teile sind sehr einfach zu Drucken und passen Perfekt. Optimal ist es wenn man auch die Pedale mit ausdruckt. Für die Pedale braucht man aber noch M4 Einschmelzgewinde!!! Gedruckt habe ich das ganze mit 4 Außenlinien und 15%…
Uses 8mm x 4mm neodymium magnets. For the paddle parts, the bottom bit is a tight fit, so you'll have to wiggle it around a bit to properly get it in. Paddle parts require M3 x 16mm and M3 nuts. I've included all the .obj files, so feel…
You should print the model two times, for both the top end the bottom of the PSU.
The new V2 pedals have a cable blocking the outer holes so I made the brackets 30mm longer to use the inner mounting holes. This is specifically for a two-pedal setup with a 5-hole gap between them. for the mounting of the base, use the…
When discovering the Sim Dashboard app I soon needed a mount for my base. The original was a great starting point, but didn't support my phone. So I did what everyone does here. Remix the sh*t out of it. It is my own model, but it is…
I've designed this “formula inspired” race wheel to fit the larger (70mm diameter) screw pattern on the Fanatec CSL Universal Hub V2, while wrapping around the buttons to provide a comfortable, but customizable steering experience. Neat…
Support pour pedalier CSL 2 pedales pour playseat challenge. Montage testé et approuvé, conception par mes soins, si besoin d'une modification n'hésitez pas. Pour le montage vous aurez besoin de M4x30mm 8x, ecrous M4 8x, vis M8 x35mm 2x,…
Needed to protect the shaft from dust so i knocked this up. Does the job. I did mine with a 2mm layer on the bottom and a sticker for a nice touch. (i dont like to waste filament so i glued on some brim i had to the inside hump instead of…
If you have Fanatec CSL pedals you probably noticed issues with mounting the back of the pedals to sim racing rig pedal plates. The mounting spacing on the back of the pedals won't match standard Fanatec mounting (275mm) or even Logitech…
Mounting solution for the Boost Kit 180 (8nm) power brick for the Fanatec CSL DD & DD PRO to Series 15 & 40 aluminum extrusion with M8 bolts and t-nuts. Print Left and Right Side mounts I added a Cage, and some Space for the Blue LED on…
Office chair hard mount adapter for CSL pedals. It works suprisingly well with a standard brake (no LC). Don't forget to set a high wall count at the dovetail joint region to avoid breaking. If you have a smaller print area you will have…
This set can help to enlarge back area of CSL pedals so you can push it onto something in case of sliding pedals. BOM: 2 x DIN912 M4x60 2 x DIN934 M4 WARNING: Do not overtighten screw, there is a danger of bending pedals metal frame.
Sieht super aus, viel spaß beim Drucken ;)
I wanted more exciting pedal plates so I designed plates based which were loosely inspired by Mercedes F1 pedals . Plates seems to be plenty strong with settings I have below. Designed so it can be printed easily with reinforcements for…
I adjusted the existing model to fit an iPhone 14 Pro (without case!). It was an quick and dirty adjustment, but it does it's job to fit the bigger camera bump.
So gemacht das man keine Stützen braucht. Es sind noch M4 Einschmelzgewinde erforderlich. Die Pedale bieten sehr viel Gripp und fühlen sich sehr gut an so das man auch Barfuß nie abrutscht. Drucker : Bambu Lab X1C 0,4mm Düse 0,2mm Layer…
Based on the video posted by amstudio https://www.youtube.com/watch?v=8aLqqcEaUVk&index=4&list=PLW_mVHJcIJmFL9AQvqOPWl9R9LVWlCZAX&t=399s my contribution is the rumble motor holder for the Fanatec CSL elite pedals with load cell. The…
Tuning kit includes: front, wing fences, top wing, rear wing and spoiler. Car in pics is not included.
Update V2_CSL_Wheel_plate much improved stability self tapping screws replaced with M5, you will need to insert 3x M5 threaded inserts from the bottom you can now use M2.5 screws to mount the outside ring The adaptor flange has 6x70 hole…
Remix of arbornoctis' excellent model. I redesigned the mount in Fusion 360 to fit my iPad Mini 4 with sleeve. Added the logo for fun :)
For more info about the model chech my first release of this here: https://www.printables.com/de/model/609752-parametricf3d-anti-carpet-slip-for-sim-racing-peda
FCU came and fits right in as first picture shows. ——————————————————— I did pre-order the upcoming Winwing Airbus FCU and then started to wonder how to attach it to my rig. Best place would be under monitor on the right side and thought…
Stops for Fanatec's CSL pedals to keep them further from a wall. You could modify the file to whatever length suits you.
These are angle brackets for Fanatec CSL pedals that can be fixed to the floor. There are two versions to choose from, 15° and 20°, with the 15° variant being my preferred choice. The included disks can be printed and attached to the…
This modification has been to be able to place a vesa75x75 universal support, in addition to the fact that my buttons did not match the original design. I have also added a support to be able to use it on a Fanatec CSL DD remix base of…
Adapt the GT Omega PRIME Fanatec Podium DD Bracket as the Fanatec CSL DD / GT DD Pro is 10mm narrower so needs 2x spacers. These spacers extend the profile ‘arms’ so you can securely mount your Fanatec CSL DD to your GTOmega PRIME cockpit…
Mounting brackets to attach a Fanatec CSL DD 8 newton-meter power supply to 4080 aluminum extrusion. Used M6-16 screws and printed T-nuts available here: https://www.printables.com/model/922383-updated-sabrent-10-port-usb-hub-mounts
Recommended print settings: Use the largest nozzle you have (E.g. I printed it with an 0.8mm nozzle and 0.4mm layers) Use 20% grid infill
Phone holder: 1x screw m5x15 1x screw nut m5 - Print base with support Tilt Components: 4x M6 x 15 2x M6 threaded heat insert
Vertical mount for Fanatec CSL Pedals. The model was not tested with the Clutch Pedal, but it should be compatible. Please let me know in the comments. Accessories needed for each mount: 2-8 screws (4 is more than enough) 4 M4 nuts 4…
Das ist eine Federmod für die CSL Loadcell Man Benötigt noch eine Stahl Druckfeder. Ich kann zwei Federn von Amazon empfehlen 25x50mm!!! NABUBV Liujia-Druckfeder Blau ca.15€ Sourcing map Druckfeder ca. 8,50€ Wer andere Federn will sollte…
Needed a simple model to extend the side, so I could add the ATS Accessories V3 Turn Signal https://www.atsaccessories.com/product-page/v3-turn-signal
Print an upgrade for your entry level fanatec wheel to make it more capable of controlling the many functions in modern race cars without having to let go of the steering wheel. Designed with Ruthex M3 Brass thread inserts in mind. I used…
Printed in Polymaker ASA, but PETG and ABS should work fine.
Remixed the P8P mount because there was no room for the camera bump. Also changed the mount holes to slits, so the holder cam be mounted more variable.
I have created a CSL Pedal for my own, but wanted to share it with you if you like it. I use M4 melting nuts to screw it from behind.
Printed in 85a and using different infill amounts to achieve desired effect. I personally like the solid design with 45% infill Also great if you've lost one and need a replacement.
This 3D printed adapter lets you mount rumble motors (e.g. from an Xbox 360 controller) to Fanatec CSL pedals for improved tactile feedback. The motors can be driven via SimHub using an Arduino and motor shield. Perfect for adding…
I was inspired by rrigby49's mod, but wanted a custom pedal plate and a little better mounting/wiring etc. Designed to use with m3 Heat inserts on the back of the face-plate, and M3 screws from the back. I printed a blue layer in the…
a adapter to mount a fanatec csl elite pedals on to a 4040 aluminium profile
Button Box for CSL Elite using a cheap num pad. The num pad is held in using double sided tape and can be brought from amazon using the link below:…
This brace is designed to prevent the CSL DD from getting damaged when used with the playseat challenge. More Information: https://github.com/team-sillex/simracing_mods/tree/main/CSL%20DD%20Playseat%20protection%20brace Category: Automotive
Video where I go over this: Provides about 8 extra degrees on steering angle. Also makes it easier to take on/off since you don't have to deal with the T nuts other than on the initial install of the adapter. Hardware needed: 3 - T Nuts…
I used two M4/M5 Screws and self-locking nuts to attach the swing bar, as well as two M4/M5 Screws and bolts to secure the pedal. The AliExpress spring bolt is an M6 top and bottom. Depending on which file folder you want to use, two…
I bought a used Fanatec CSL Elite wheel base without a clamp so I decided to design my own. Additionaly you need M10x80 bolt and M10 washer. I printed it with PETG with 30% infil with 5 perimeter lines. It is better tp print it on a side…
BMW M4 CSL as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
I hate printing and removing supports. Here, i've blanked unsupported holes 0.2mm thick so you woulndn't have to. Just punch through or remove them with something sharp after it's printed. No other changes made. I'm unsure what license…
Un petit remix du modèle original pour un peu plus de rigidité
A slight modification of the original model to accommodate ¼ hex bolts and nuts since they are much easier and cheaper to get in the US. Printing Recommendations 0.20mm layer height. Use at least 4 walls. Use PLA+ or PETG for strength,…
Bracket for mounting an EAF to a Moonlite CSL 2.5" Large Format SCT Focuser.
I bought a set of pedal shakers from Simsonn for my Fanatec CSL pedals but could not find mounts so here you go. This mount is compatible with the VAM Pro, Neo, and V2 motors. Because of the orientation it is best suited for the VAM Pro…
It's great to have such bright LEDs. However I mostly don't do manual shifting, so they are drawing too much attention. So I've designed this Revolution LED Dimming Plate. The amount of dimming is directly related to your choice of…
Printed on 0.20mm on Bambulab P1S worked fine for me. The design is tight.
i used pla with 15% infill and 0.2mm layerhight with this plate you can use long screws and mount it directly on your rig.
This is a 1:1 scale model of a standard PCSL target. The design is based off the diagram from Section 7 of the PCSL rulebook linked below. The “K” and “A” targets are highlighted with a small “lip”.…
I created this to mount the Simagic HPR modules to my CSL Elite pedals. These may also work for the CSL Elite V2 pedals but I dont have those to test. Use the countersink screws included with your HPR actuators to mount them to the…
![CSL Pedals Office Chair Hard Mount Adapter [Parametric]](https://media.printables.com/media/prints/1224764/images/9183203_e1efcd62-2519-4575-b321-280abe468ffc_6539c19a-a502-4072-a393-3dead5bae638/tempimagebpth0t.gif)
