1575 modeli
Replacement of the original broken part Suitable for rod diameter 17-20mm Print: ABS part Layer: 0.1 Perimeter: 4 Filling: 60% Gyroid Collar: yes Support: no FLEX Part Layer: 0.1 Perimeter: 3 Infill: 15% Gyroid Full Bottom Layers: 11…
Wydruk około 0,68 €–0,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print the Clip with a Layer height of 0.2 For better Quality use the .STEP File! Remove it from the Printbed, and it is redy to use. have Fun!
Wydruk około 1,21 €–1,47 € nettoWstępna wycena jednego wariantu
Introducing our 3D printed hanging hooks for curtains and blinds with pleat curtain tape. Designed as an alternative to IKEA RIKTIG. Available in three different variants. Two variants allow for parallel or perpendicular hanging of…
Wydruk około 0,15 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A plate for weighing down Lysel slatted curtains. Measurements: 89mm x 50mm
Wydruk około 2,04 €–2,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hello Support de tringle à rideau au motif nid d’abeille. Ecart de 4,25 pour les 2 vis avec passage pour le tournevis et bouchon pour l’esthétique. Fichier Fusion 360 inclus pour l’adapter à vos dimensions. Tringle de 33mm maxi (ou…
Wydruk około 6,43 €–7,86 € nettoWstępna wycena jednego wariantu
We have some side-light windows where we wanted to 3/8" down to hang some narrow curtains. This model solves that problem. Use a pair of these per dowel. Use the provided hole to mount to the wall with a small screw.
Wydruk około 1,22 €–1,49 € nettoWstępna wycena jednego wariantu
This curtain hook works for 20mm diameter curtain rods e.g. IKEA RÄCKA, IKEA BEKRÄFTA (19mm). Features: The hook is lockable and can be re-opened any time. The detent locks in a pocket, which prevents it from sliding out sideways. Print…
Wydruk około 0,22 €–0,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Weight plates for blinds sometimes become brittle and break when removed from the connecting chain. Several popular repair solutions ( https://www.printables.com/model/147266-89-mm-lysel-slatted-curtainvertical-blinds-weight ) suggest…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A curtain rod holder that accepts rods around 16 mm in diameter. Fits Kirsch wall fittings that are commonly installed in Sweden. Just like the original metal hooks, no tools are required for installation (assuming that the fittings are…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena jednego wariantu
Fits 12cm rods. An adapter for oval rod systems can be found here
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
Simple holder for a 20mm rod to insert into the IKEA tisken holder. You need 2 of the parts and a rod that is the length of the shower cabin, which is now simply inserted into the holder. printed with 50% infill made of PETG
Wydruk około 0,94 €–1,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a wall anchor for an Umbra Twilight curtain rod (tested on the Double Blackout version) with wider 32 mm spacing between the screws. Design features This is designed to fit into the slot on the curtain rod where the manufacturer's…
Wydruk około 0,42 €–0,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model is a simple replacement hook for the curtains on a hardtop gazebo. It was printed with PETG; however, ABS may be a better option. The brown hook is an original part and the orange one is the replacement.
Wydruk około 0,78 €–0,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Crochets pour des rideaux de pergola Hooks for pergola curtains
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
Made to fit the UrbanRed Ceiling Curtain Track Rail System https://amzn.to/43jKipe * * Amazon Affiliate Link
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
Unobstrusive Curtain Rod Holder for rod diameter <= 12.5 mm. Fix the holder part with 3.5 mm screw. There are two caps. One has two openings so that it can be fitted between two rods.
Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu
Our curtainholder broke. This replacement is for the broken part only :) The original holder was internal and had only one screw and a bit longer. This design is internal and external and has 3 screws. Printed with 7 perimeters to have a…
Wydruk około 2,95 €–3,61 € nettoWstępna wycena jednego wariantu
Curtain rings/holders for typical IKEA curtain rods with diameter of 20mm, 26mm or 30mm. Recommended print settings: Filament: PETG 0.4mm Nozzle Walls/Perimeters 12 NOTE: Do not print with PLA as PLA will creep/deform if put under…
Wydruk około 0,99 €–1,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple curtain tieback to keep your curtains or drapes open.
When searching for a shower-curtain hook, I struggled to find one that was not flimsy or had odd design choices. So I made my own that meets my criteria! Goals I wanted my hook to: Be able to support heavy shower curtains and resist…
Simple elegant hook for your curtain :) The Ikea one was just straight ugly... There is a lefty and a righty one in the file. It prints flat without supports. I printed it in Carbon fiber PLA from Protopasta. They have been up for a year…
Curta-Type-I-3x 3x scale Curta Type I for FDM 3D printing Important This large project has become difficult to keep up to date here, so all of the latest changes can be found on the Github repository for the project. Contributions The…
Simple, effective, stylish, durable and you can use zip-ties to lock rod in place. This way you can attach them on the ceiling or some type of horizontal plane. Effectiveness guaranteed. Print Settings Rafts: No Supports: No Resolution:…
2 sizes: 10cm and 4,5cm depending on size of your curtain smooth edges and round format Printing instructions: any material any layer height 15% infill Version history: v1.0 21.6.2023 initial release
Set of threaded grommets for hanging the curtain. With these grommets I was able to make wardrobe curtains that cover coats and shirts. You don't need any other tools except small scissors (and of course a 3d printer). Variants: The…
Curtain rod holder for 35mm wood or metal rod. 2 x 3mm counter sunk holes for mounting. I printed in PETG 50% fill and 4 walls for extra strength.
A simple hook for the shower curtain. It has more strenght than the one you buy with it, so this is a nice replacement for the broken ones! Let me know if you like it, if you print one yourself, and also consider checking the other stuff…
This magnetic clip is designed in Fusion360. The model in fotos is printed on my Prusa Mini+ with 0,6mm nozzle and 0,2mm layer height. I used support cubic infill but check my G-code for more info. No supports needed. I used magnet of…
Simple curtain hook to retain your curtains. I've uploaded three versions, a long, a less wide one and one to attach to the wall with tape.
Use 3 walls. A simple and elegant ring designed to keep curtains neatly gathered without requiring wall-mounted tiebacks or hooks. Simply wrap the ring around the curtain to hold the fabric together, creating a clean and organized…
Lost the hooks for our curtain rod. So designed a replacement. Fits a 30mm rod. Print as many as you need to support the length of your curtain rod. We only need two for an 8' span. Print instructions 3 perimeters with at least 15% infill
Curtain hooks that look pretty cool.
I needed to keep the lights from tangling up in the wind so I put this together as one of my first OnShape parts. Onshape Link
Curtain Hooks. I could not find any curtain hooks for emergency purposes. The old ones had become brittle and as I touched some of them they broke easily. I eventually managed to piece one together and get some measurements. I then drew…
Created holders using Fusion 360. Printed on the Voxlab Aquila. Used Solutech Neutral PLA. The print using this filament blends in with the background wall color.
Wall mounted hook for drawing back curtains from a window
another curtain bracket...with a cat scratching the curtain ... typical of cats
I needed some Curtain ties so fired up Fusion 360 and knocked these up. I printed them in Fillamentum Metallic Grey Flexfill 98A*, https://fillamentum.com/collections/flexfill/products/flexfill-92a-metallic-grey and they came out great,…
I printed the model on a Bambu P1P using PLA. 3 walls ensured plenty of strength in my case. No support needed when printed laying on its side.
I wanted a simple, but wide holder for my curtains. I've attached it with double sided tape.
The Ropener is an open-source motorized curtain opener that retrofits onto your existing curtain rod. Silent stepper motor, ESPHome-native firmware, no cloud, no app required. Works with nearly all curtain types. WHAT IT DOES Pulls your…
This is the curtainator. It's designed to open curtains that use a rope loop on one end. I couldn't find any product like it so enjoy! I'll probably be making improvements to this as things break. Components: There are 3 main components…
Rings for IKEA RÄCKA, HUGAD. Hooks for attach curtain to rings with paspula. Print instructions Unassociated tags: RÄCKA Category: Decor Summary Rings for IKEA RÄCKA, HUGAD. Hooks for attach curtain to rings with paspula. Print Settings…
(Deutscher Text: Siehe unten...) This is a "standard" shower curtain ring. The top one in the photo is the original factory-made ring; the one, this Thing is modelled after. Can you spot the difference? If it doesn't fit your existing…
The Blind Chain Connector is a functional and durable component designed for connecting chains in roller blinds, venetian blinds, and curtains. The model is designed with easy installation and durability in mind, making it an ideal…
Strap to hold curtains. Small and large versions to accommodate different thicknesses.
Curtain hook with matching ring. If the ring is too small scale it accordingly in x and y dimensions. Should you wash your curtains with the hook attached use PETG. Im using them for years up to now and the hold still excellent.
Needed some S hooks for my shower curtain to replace some missing ones so I modelled these in FreeCAD. Print instructions You want these to be solid for strength so print with 10 perimeters to make them fully solid. (Works better than…
This was a Curtain rod holder bracket I designed to be used with a wood dowel. The hole for the dowel is exactly 33.5mm Diameter. Roughly 1 5/8th inches. I advise printing out the piece and bringing it to your hardware store to find the…
A shower curtain ring with a print-in-place roller bearing that will smoothly glide across your shower curtain rod.
I printed this in Nylon (bad finish because of 0 cooling but strong as heck) buy I assume this would also work in ABS or hard TPU. PLA I'm not sure because you need some flex for it to be able to clamp nicely Print with supports in this…
Needed a curtain rod holder my kids couldn't bend, so this is what I cam up with. Fits two 5/8" rods that should snap into place. The rods are 34mm center to center with the first 80mm from the wall.
Simple model yet working quite well
Raffhalter für Gardinen / tie-back curtain
curtain bracket - its name says it all
A small collection of different curtain end caps. They slide onto the rod without the need for screws by using a pressure fit. Designed for 20 mm rods, but can be scaled up to fit any size. The slide-on tube is rather long to guarantee…
Curtain rod holder replacement for broken original holder. Just print with PETG and 100% infill for maximum strengh. Place supports in the middle to support the hook. Gardinenstangenhalter als Ersatz für gebrochene originale. Gedruckt mit…
Never thought it would ever work when I designed this, but it printed flawlessly without any supports. And it's surprisingly strong. Clicks right in place. Just be carefull with the latches on the cover, those can be broken easily but…
Needed a hook to hold the curtains/black out shades during the day
This is a remix of "Katana Holder" by noordvyk. I smoothed-out a lot of the edges and made some minor changes to the model such that I think it'll now print nicer. While the original model was posted as a Katana specific thing, obviously…
un simple support de tringle à rideau diam. 22mm Don't forget to click on "like" and even better, to publish your creations and put a few stars if you liked it. Thank you. N'oubliez pas de cliquer sur "j'aime" et encore mieux, de publier…
This double shower hook provides an easy way to hang your shower curtain and liner. These allow the shower curtain and liner to be hung separately, making it quick and easy to replace either. The rod shown in the picture is 25.4mm (1.0in)…
Designed to be printed without supports when oriented upside down from how it will appear on the wall. You shouldn't have to rotate the object before slicing. Warning: If you try to print it in any other orientation, it will not be strong…
Upgrade your IKEA VIDGA curtain rod setup with this improved and highly overengineered connector! Designed to be significantly more stable than the original IKEA part, it minimizes wobbling for a cleaner, more secure curtain installation.…
I designed a rail holder for the IKEA PAX closet so you can use a curtain instead of sliding doors. It's intended for the RÄCKA rail with 16mm and 19mm diameter. I also encluded stoppers / end caps. Print instructions Prints without…
Wanted to create nicely printable hook for curtains - so this is it Just add 2 screws and your are ready to go! Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 30% Filament: PlastyMladeč…
Curtain rail stopper, 2 parts. Category: Household Supplies
Print in PLA and use 2 sided sticky tape (tesa powerstrips) I designed it with 29mm diameter for some play, still holds fine :)
The finishing trim piece that goes around snap studs in Volkswagen T4s (Transporter, EuroVan, Caravelle). Best printed with something flexible and near-zero infill for like-factory feel, but even plain gray PLA works well to enjoy the…
Curtain support easy to fix on the wall and holds the curtain well. Easy to mount and easy to move the curtain's bar. There is 4 different diameters for different pole size. Works with 0.75in, 0.65in, 0.5in and 0.4in bars. Material…
A basic hook for a shower curtain. Inner diameter (for curtain rod) is 28mm or about "the width of a thumb" in imperial units.
Curtain hook with a lock that can be used as a replacement for hooks from the discontinued IKEA Kvartal curtain system, as it fits into the Kvartal gliders. As the original hooks I used had seemingly quite low UV resistance, most of them…
Some simple improved hooks for Curtains hooked up on Rings
Are you tired of your SV07 and SV07 Plus sounding like that old Eureka vacuum that Grandma had? Would you like to be able to actually sit in the same room as your printer for more than 5 minutes without your ears bleeding or going deaf?…
Sliding hook for your curtains. It prints fast, slides well, has no overhangs, and no supports are needed. Print and use it right away.
I purchased a set of double curtain rods, and the cheap metal bracket bent almost immediately. After a few iterations in fusion 360, here's a strong replacement! Features a clamp, as well as through-holes for ease of installation. Holes…
Simple curtain wall hook that mounts to the wall by a command strip. The removal tab is hidden but accessible for unmounting. Model is for a medium 70mm x 18.5 mm (2.75in x 0.73in) command strip. Fusion 360 file is included if you need to…
A simple parametric vase design
This is curtain hook. I made this model, because curtain hooks are often broken :-). Be healthy! Print instructions Material: PETG Perimeters: 3
Remixed from the FlyingPurpleCow's awesome Screw Together Death Star model. These Death Star curtain rod finials were requested be a friend for his Star Wars themed home office. The design should fit a 19mm rod at 100% and can be scaled…
This is a curtain rod bracket that is sized to comfortably fit an 18mm rod, aka a curtain rod made from 1/2" metal electrical conduit painted black. The screw holes are 4mm, with 9mm recess which is countersunk. I only put a screw in the…
Set of rod holder. Anchored to the wall by 2 screws, while one is hidden. Designed for 22mm diameter wooden rods. Left, right and middle holders contains divider that prevents rods from shifting aside. Middle divider enables to continue…
Family needed a replacement for a broken curtain holder in the bathroom. Took some measurements, Spend some minutes with Fusion 360 and did print it. Fits on the first try. Everybody is happy. I've attached the Fusion 360 file, too. So…
My kid bedroom curtains had some eylets detached from the fabric, so as a replacement designed this simple model with 41 mm inner diamenter (similar to the original ones). .Printed on a MK3S+; . Filament clear PETG; .0,15 Layer height;
A simple rail to really block out the sun with regular blackout curtains. The rail is 175 mm long, making it printable on a wide range of printers. For my particular window I needed 1400 mm tall rails, which translates to 8 parts per rail…
C-rail version with additional disk added for improved bonding on the rail. Print settings: BRIM: outer only infill: 99% Walls: 3 Layer: 0.16mm Dimensions: Female part: 17.7 x 17.7 x 5mm Male part: 16 x 11.8 x 13mm
have you ever tried to sleep in a room that was way too bright? Are you tired of the floodlights that your landlords place right outside of your bedroom windows? The typical solution is to put up blackout curtains, but the light just goes…
Clip for 3mm rails to prevent curtains from being pulled out of the rails.
Two sizes and no supports needed on this print.
We have searched at many places for the right curtain rod finial which harmonise with our bedroom desing, but could not found the right one. Than with few ideas and hours it was ready&printed ! ; ) Print instructions I have used black PLA…
If you'd like to support me you can post a make, comment and/or pay me a coffee at PayPal , @paulorfo (Venmo), $paulorfo (Cash App) -------------------------------------------- Keep in mind this is not meant to hold the curtain open, this…
Print in horizontal orientation and with 6 Wall loops (100%) for strength. Should be printed with material that can withstand higher temperatures during summer. Support is recommended. Small pin needs to be inserted into the retainers…
I wanted a double sided hook for my shower curtain to make it easier to take the liner or curtain down individually to wash them. I found a couple options, but they were either different heights on the two sides, required multiple pieces,…
Liked the original idea, but did not have the correct magnets available. Remixed for 6x3mm magnets. Attached Fusion 360 file, step file and STL of the remix. Everything else as the original.
Small shower curtain hook. I printed it in Hatchbox PETG (0.2mm Quality, 15% infill) and it turned out pretty good!
When you need to mount curtain rods above a window frame, this template provides a quick way to consistently mark accurate drilling holes. Two holes are available, one at 3” and the other at 4” measured diagonally 45 degrees from the top…
Many older appartments in germany are equipped with rails for curtains. Several small plastic parts are required in order to use these. The actual curtain is equipped a number of small hooks, each equipped with a pair of little wheels.…
