139 modeli
Sticks from the canopy get used pretty quickly and fall through the holes. This little print helps to prevent it. You need: 4x M3 14mm 4x m3 nuts On the photos the nut hole is bigger, i've made it smaller later. Prints without support.
Wydruk około 0,33 €–0,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Why? My buddy showed me those when we were talking about a drywall ceiling I was about to put up in my living room. While many different tools like that exist already I wanted to make my own to practice CAD and add mounting for the “laser…
Wsporniki ułatwiające wypoziomowanie profili płyt kartonowo-gipsowych CD60. W połączeniu z laserem znacznie ułatwiają pracę, zwłaszcza w pojedynkę. I used ready-made M5 bolts and M5 nuts. Or you can use regular M5x20 screws and print…
This is a case for the RD6006 variable voltage regulator. The design accounts for some ventilation holes and 4 points with which you can remove the RD6006 from the case. Unfortunately in my print the top part broke off. I printed only…
Desk housing for the Riden RD6006 Power Supply Controller, for use with an external DC power supply. In use with a 19V, 5.5A external DC power supply. Hole the on back panel is 7mm to fit a panel mount DC connector. Handles are an…
Designed a mount to hold a Dell D6000 dock to the bottom of a desk. It is designed to slide in from the back with a clip built in to add friction to hold it in place. The holes are setup for #8 pan head screws. Features: Tool-less…
The first fully modular, no solder needed 3D printable shell for the Xbox 360 Slim! Key features: Fully modular - Being able to 3d print this in separate pieces allows you to swap parts out if they break or if you decide to change…
Use to mount a Dell D6000 dock to a flat surface
Socket pro počítačový stůl, D60 mm
Recommended to print vertically.
Two RD60xx PSU in one case using a single 1000W power supply as power source (800 & 1200W are also available, see link below). Support my work For non-Prusa parts and filaments, check out 3DJake ( International , UK , Germany , France ).…
Hi everyone, I tried double sided tape for some time and it didn't work really well so… 3D printing to the rescue! This is a simple mount that fit the Dell D6000 so it can be fixed under your desk.
A stand to prevent the inhaler from tipping over. In order for the front foot of the inhaler to reach all the way to the bottom, use a hair dryer to soften the plastic a bit and shape it exactly when you put the inhaler on. Stojánek pro…
Printed on Prusa MINI, 0.4mm nozzle, PETG, 0.20mm layer height, 15% infill, with supports
Printed with 100% Infill ~ 60g ~ 6h sorry for the poor pic - changed some details on my printer and used really poor filament with very wild changing cross-section…. horrortrip xD I packed different insulations and stayed with the one in…
To download the box of my idea and project for the laboratory power supply riden rd6012, the box fits a dedicated 800W power supply NVVV, the top of the housing is folded out for quick access to the power supply. Box in two options,…
Ideal RPG/Wargame Dice Each time you need to roll "one more than before", it becomes more difficult by the same factor (133%), approximately. Great for sensible difficulty increases in RPGs and Wargames that use a lot of Die Modifiers…
Riden power supply RD60xx panel case to keep your panel on your desk and hide the actual supply under your desk. Print best using PETG as PLA might get soft when it heats up. It's best to print it facing front of the panel (open wall)…
Good day, printhead's! Designed this for my workshop Dewalt DWE7492 power tool vacum connection. Also, because I use osVAC system all over the shop, added male end to both vacum connections. osVAC male ends M32 Dewalt outlet D60…
Attempting to tidy up my life and needed a little mount for the Elgato Capture card. Sleek design to ensure the unit sits flush with the front. Printing: Can be printed without supports Took around 60mins on Bambu Attaching: 4 countersunk…
This is a tool that helps in leveling of suspended ceilings with CD60 profiles and direct hangers "ES". Should fit hangers of most brands. Slot was specifically enlarged to fit Norgips brand ES hangers. Includes custom *.3mf PrusaSlicer…
part I used is: -3M bumper rubber feet -Pomona 2854-0 and -2 Banana Jack Connector -RD6012P (I haven't tested if other RD model fits) -One M2.5 countersunk screw I also made a single part variant
RIDEN® RD6012W USB WiFi DC-DC EPP-500-48 MEAN WELL - https://www.tme.eu/sk/details/epp-500-48/otvorene-zdroje/mean-well/ 4304.4023 SCHURTER - https://www.tme.eu/sk/details/4304.4023/konektory-iec-60320/schurter/ CP30090 CLIFF (only power…
The existing grills can be pulled off and re-attached without any problems, at least in my experience. They're held in place by an adhesive that is still sticky. So you can try this mod without any risk of damage or without any permanent…
The .stl files are the whole model and half, which you can also print as a mirror image and assemble the whole enclosure. If you would like to redesign something according to yourself, I have added the .step files.
You have to cut the hole for the power supply yourself in the desired place. The .stl files are the whole model and half, which you can also print as a mirror image and assemble the whole enclosure. If you would like to redesign something…
A quick simple desk enclosure for the well known RIDEN RD6006/60xx range of DC-DC power supply control units. This is for when you have a separate AC-DC supply and only want the handy and small RIDEN DC-DC unit on you lab bench taking up…
Riden RD6018 Basic Model
Should work with HD6xx, HD650, HD600, HD58x, HD580, HD660S, HD565, HD545 Depicted in the photo is an HD58x with Shure SRH1540 Alcantara Ear Pads. If you remove the stock foam and use the included foam on the Shure ear pads you get a very…
Hanger holder for leveling the suspended ceiling PROFIL CD60 ES G-K A professional bracket for mounting and leveling CD60 profiles in suspended plasterboard ceilings. This makes installation faster, simpler, and even possible by a single…
Using the infill on grill2 and removing the top and bottom layer thickness, you can create a infill design based grill for your HD650. Its designed to be printed on the face of the print so that the bedding texture can create a nice look.…
Marker for leveling aluminum profiles CD60 with magnet Width 60 mm Magnet 20x3 - 2 pcs
Needed a simple bracket for keeping my docking secured under my desk.
A case to house two RD6006 units and a PSU to drive both. [EDIT 28/05/20] - the RD6012 should fit as well, as the dimensions appear to be the same. I say should, as I don’t have one to try... but the sizes on the RD tech site are the same…
This is a die with 60 congruent faces and a matching holder. The die is based on the pentagonal hexecontahedron , a Catalan solid which means it is face-transitive (all it's faces are the same). Use cases (Mtg) Life Counter You can use…
This is a simple, functional, angled case for the Riden RD6006 buck converter. Designed to take a 10mm power jack in the back. Vented for airflow. M3 5mm screws hold the back in place (example in photo 4 available from Amazon) Main body…
This is another version (made by myself - inspired by many others though) for direct ceiling hangers (u-hangers) bracket and marker for suspended ceiling for CD profiles with 60mm width. You will need 2 M6 screws (at least 20mm long) and…
A semi accurate model of the popular RD6006 Power Supply. Use this to help model your own case like this one Includes STL, STEP Link to Fusion 360 file: https://a360.co/2QxLvUf Category: Electronics
Platforms to hang the Ultimea Poseidon D60 rear speakers to the wall. Infill: 20% Printed in 0.3 layer height
Kryt okolo trubky topení o rozměrech d=60mm, D=27mm, s=5mm. Nutno vytisknout 2 kusy pro složení.
Remix with case being 6mm deeper to accommodate the new P(W) series. Printed with back on build plate with support everywhere
This is a case for the RIDEN RD6006 variable voltage regulator. And a WX-DC2416 Power supply 36V DC 5A https://cutt.ly/69tJ8Ij The feet must be fixed with glue.
Hanging mount for soundbar using VESA standard and original hanging points of soundbar. Designed with 32" TCL tv and Ultimea Poseidon D60 soundbar, but dimensions and shape are customizable for any VESA and soundbar. Go to OnShape…
Remix from @sterinli27 s Edge Bracket for “free” under desk mount. So this is a symmetrical version. Printed in ABS black on an BambuLab X1 Carbon
The project: I got an awesome printer renovation and conversion project from a colleague at work. Converting and upgrading a Creatbot D600 industrial 3D printer. It has a massive 600x600x600 build volume and dual extruder with 5KG spool…
The stand needs an M15 washer (2.6mm thick and 28mm OD). It is best to glue it with epoxy. The slot for it is slightly deeper than required so there's some room for adjustment. I also made small slots with a Dremel on both sides of the…
Box for mounted power supply RD6006, RD6012, RD6018 (you have to drill the power supply mounting holes yourself) because not all power supply models have the same fixing holes. With HW-585 PWM Module Board :…
A simple desk enclosure for the well known RIDEN RD60xx range of DC-DC power supply controllers AND a Meanwell LRS-100 power supply Google the power receptable https://www.google.com/search?q=IEC+320+C14+male+panel+mount Google Riden…
Due to limited space on my table I made a housing for my power supply that I can put on the floor. I added a step file if you want to adjust lower part to your small part. Update: I moved the power supply to the left to make more space on…
The MD Helicopters MD600N is a light utility helicopter developed in the United States as a stretched, eight-seat version of the MD520N. It first flew in 1994 and entered service in the late 1990s. Unlike many helicopters, the MD600N uses…
Best with 30% infill, latches can be fit into the small space on the top. Messurements are 160,7 mm /76,5 mm/30,3 mm (l/w/h) so could be used for other dockingstation adapters.
This is a vertical case for RuiDeng RD6006 lab bench power supply. It is designed to fit a power supply unit that comes with RD6006 from official AliExpress store (216 x 114 x 50 mm). You will need some other hardware, which you can find…
I wanted to have a case for my RD6006 power supply that included a DC barrel connector. So I remixed the excellent design from Alberto Nidasio to add said connector. As I had it opened in Fusion 360, I also modified it a bit to reduce the…
Performance Kit Modify
Handle for the Godox AD600 pro studio flash. I printed at 4 wall thickness and 80% infill with gyroid fill pattern and it seems very strong. You will need slightly longer than stock bolts I used m3x16 bolts with small washers Aligned to…
A case for the Riden RD6006. Designed around this model https://www.thingiverse.com/thing:4073986 Features: Modular front plate so you can optionally have front facing outputs for USB, XT60, Banana plugs or whatever you like. Modular back…
Computer desk socket, D60 mm. Print and assemble
Simple stands for Dell's D6000 docking station. These are meant to sit on the table top. V1 has smooth edges, V2 is tight so that it can sit starting against a wall. The docking station sits pretty tight within the stand, going forward…
I don't like putting pressure on my headphones pads when I hang them on their holder. This one holds them on the plastic sides without touching the foam. You can basically scale them to hold any headphones that way. Tested succesfully…
I made eyecup consisted of two parts - the outer parts can be printed from TPU while internal - PLA or PETG.
I dropped my Moosoo D600 Handheld Vacuum cleaner on a brick patio, and broke the hinges off the canister. This print took care of it. Category: Replacement Parts
^ Title! Category: Electronics
To fasten Dell Dock under my desk. The model has no holes for fasteners, I just glued it under the table.
I wanted a super small case for my RD6018 power supply that had a built in step-up converter but also allowed for direct input. This way i can plug a battery into the power supply and use it remotely as well. The components i used: The…
Should fit various models. Print it with TPU. Ninjaflex is a little softer than the original part and is challenging to print with. Or, Ninjatek Cheetah is quite a bit firmer than the original part - maybe reduce walls to leave fins…
A replacement knob for my 60-minute wall timer from Intermatic. The original knob broke quickly, this one has held up for many years! I printed it in white PLA, and coloured in the little indicator on the top with black sharpie marker,…
I have seen a few filament dryers out there that require you to cut the trays apart on a dehydrator. I have also seen the 5 gallon bucket versions. The adapter rings on those usually causes turbulence because the heat comes out at the…
Full cylinder container that I am using to protect my USB microscope with its cable during transport inside my bag. Could be used for others purposes. Dimensions : Outer Diameter: 60 mm Outer Height: 145 mm Print Settings Printer Brand:…
CD60 Spacer/Distancer The whole length of the distancer is 40cm and the inside spacer is 34cm I made this model back in 2024, I don't really remember all the measurements thus I'm attaching STEP file for you to modify it for your own use…
Spindle adapter 1500w for cnc Stepcraft
My view of case for RD6006 with an angle (25 degrees). Backside as hexagons for airflow and modular base for adding connectors for power. To ensure that the case is secured with the device, there is there is a hole for screw and nut.…
This is a case I made to hold my D60 Soldering iron, the USB C power supply with cable, an extra tip, and a desoldering pump. It uses the Allen key (that is needed for the tip exchange) as a hinge. I wanted the case kept small(ish), so I…
Ventilation Grid to screw. Square is: 85x85mm The openings are in a diameter of 60mm Screw holes are d:3mm
RD6012 Backcover with Slots and screw in XT60 male connector (amas). Use some screws to hang it onto a wall.
Riden RD6012 Power Supply Under Desk Mount Designed for 3.0x12mm screws attached to wooden shelf Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Prusament PLA Category:…
A small enclosure for a PoE injector and QC 3.0 charger designed to sit on top of the RD6012 PSU ‘kit’ sold all over aliexpress and banggood. PoE injector is nice to have from time to time and QC3.0 is useful doe charging devices and…
Add STEP file for people to make their own designs from. NOTE: 3d printed JAWS are not intended for metal cutting also holes can be smaller (untuned printers) and tighter. They will work you might need to run the bolt one or twice through…
Desktop case for the Riden RD series power supplies. I have the 6018 but believe the series (6006, 6012, 6018, 6024, 6030) are all the same dimensions. The display is angled back to sit at 25 degrees from vertical. Vents for air flow are…
This is a keyboard case for standard 60% PCBs and plates (e.g., GH60 and DZ60). It can accommodate both tray and gummy worm mounts. Those with build plates of >= 300x300mm can print out the "Whole Case" in one go. Those with smaller build…
TS80 Soldering adapter for power supply case with USB QC3.0 output: https://www.thingiverse.com/thing:4521874 Very often when I need a power supply in my projects is also involves soldering, therefore, I have incorporated a QC 3.0 USB…
Designed for the random banana connectors i had laying around. The stem is 5.8mm wide, I made the holes 6.2mm wide. The f3d file is included if yours are different. After printing it for the first time, the top broke of like the original…
Gridfinity tray for one set of aluminum soft jaws for your 6" milling vise. This fits jaws that are 1" thick by 6" long. The magnet holes in the bottom are sized for 6x3 magnets, press fit.
This piece can be fitted on any Riden 60XX powersupply to avoid excessive play when mountin it into the sheet metal case. Without, it wiggles around when unplugging cables or pulling(pushing on the knob. With the spacer it sits nice and…
Mount your Elgato HD60 X capture card to your computer with this magnetic mount! Use up to nine 6x3mm neodymium magnets (like these ). The magnets are press-to-fit, with very tight dimensions so no glue is required. I recommend using a…
RIDEN RD60xx Desktop headunit enclosure, includes XT60 panel-mount for DC power input. Remixed to fit the RD6030 which has larger inductor coils on the back. No special printing requirements, I used Polymaker ASA with 0.4mm nozzle.…
T-Slot Covers for Wabeco D6000 10mm These covers help you keep the t-slots of your machine clean and free of chips. The covers fit 10mm slots (nominal) but are slightly wider to fill a total of 11mm width. Adjust the length of the cover…
20 degree base to use with https://www.thingiverse.com/thing:4552134 Category: Electronics
this was my first very own model, originaly printed on my leapfrog creatr, fits perfectly for the HD600
Godox AD600 Gel and Grid Adapter This is a 3D printed adapter designed for the Godox AD600 standard reflector cap. It allows you to attach lighting gels and includes a built in grid to help control light spread and reduce spill. The…
The knop of d6021a Android 1 din radio was not working. I noticed it was becease knop was too lose it came of easly. I made new 3 due the filament shrinking depents on you filament. Knop is a bit bigger to it is easyer to handle.…
Simple small case for RIDEN/JOY-IT RD6006 or RD6012 Power Supply. Print instruction: To print position its back down to the printer bed.
I used double sided tape to mount it to my wall behind my tv. You can still take out the SSD to put movies on it from PC. Let me know if you have suggestions to improve :)
Box + holder for power supply Riden RD6006 to mount it to shelf - still possible to move out. Holdes for tempreature sensor with spool in bottom Functional draft version DC socket ON/ OFF button
RIDEN PSU RD6006 - Case wall mount including additional PSU for with 24&12V DC Note case is hold to the wall mount via 9 X round magnets 10mm X 2mm Note the RD6006 PSU design got from Grabcad…
A holder that can hold up to 4 Elgato HD60x capture devices and a small stick to hold them in place. I printed in PETG with 20% infill.
2.5U 19 inch rack front panel mount for RD6006 Power Supply (Joy-IT/Riden) These panel mounts require the DAP 2U MP-1 bracket. This bracket must be cut in half, with the two halves moved 2.5U apart. Print the front panel mount / cover…
Distanzhalter mit Innen-Ø 10mm und Außen-Ø 60mm, Höhe von 5mm - 110mm Sehr stabil Breite der Wandung innen und Außen 3,2mm Breite der Rippen 2mm
Simple sandwich case for the Split Alice. Used 3mm x 6mm magnets. Alignment lip is on the upper shells.
![Ultimea D60 soundbar VESA TV mount [CONFIGURABLE]](https://media.printables.com/media/prints/1235146/images/9259070_30c6d1de-34c7-40b2-943c-0a3d5c11e653_4b632cfc-2fc9-4b02-8671-f39221c494c4/large_display_side_1235146.jpg)
