Displate Multiuse Mount
This is an option to the sticker on the wall. You just stick the magnet in the center and drill the Mount into the wall. Still in testing! Ill upload more photos when its printed.
- Pobrania
- 72
- Polubienia
- 2
- Ocena
- 5
39 modeli
This is an option to the sticker on the wall. You just stick the magnet in the center and drill the Mount into the wall. Still in testing! Ill upload more photos when its printed.
Simple mounting bracket that fits the self-adhesive magnet included with Displates, to use screws or nails for attachment to a wall instead of the adhesive. I used two nails to secure it, and it's holding up and looking great.
Just a litte stand for the original magnetmount from Displate.
Some Notes: Printed 1,5 years ago, used support material, likely unnecessary. Printing is super easy, 15% infill. Warmed metal at folds with a hairdryer for 3D model fit (see last picture). When nailing to the wall, use a level for…
This is a fix for the problem of the Displate Wall-sticker, which does not really stick to a rougher wall. It is basically a tray, in which you can put the magnet, delivered with your plate. The “Displate close” file is the one in the…
This is a mount to use a LED strip as a backlight for your Displate. Additional Parts To build the backlight, like in the pictures, you need: Ws2812b LED strip (can be a different one, if you prefer another) ESP32 running WLED (see WLED…
Magnetic Poster / Displate Mount Why I designed this? I own a significant number of magnetic posters (Displate) and have discovered the shortcomings of their mounting system: - They are not re-usable and need to be replaced should you…
Description For those who already have a hook or nail on the wall and do not want to glue anything. Compatible with 80x80 mm self-adhesive magnet included with each Displate metal poster Printing instruction “Normal” settings, 0,2 mm…
This is a wallhanger to mount displates without magnets. It was designed with L sized displates in mind and I do not have an M sized displate to test it with. Mounts to the wall using nails. For each bracket you print you will need: 1x…
Easy to mount riser "3D magnets" for Displates.
I wanted to allow for an ethernet cable to run behind my Displate, so I created this. Screw holes are 4.5mm Standoff ~8mm
This is a simple spacer for mounting Displates to a wall. It has holes for 1.5mm nails. It was used to add LED lights to the Displate as an indirect light. The spacing is suitable for mounting a Shelly RGBW2 LED controller on the backside…
Too Many Displates and Not Enough Wall Space? You're not alone—I’ve been there too. Tired of leaving your Displates lying around, risking damage? Here’s my solution: A lightweight, practical storage system designed to securely organize…
A wall bracket to hold metal picture plates
Since Displate sticker magnet attachments don't stick to plastered wall, I made this small part to stick the magnet to and fix to the wall with 4 small nails. How to use: Print the model Stick the magnet Nail the part to the wall Place…
Had this idea, looked on printables, thought I could make one more lightweight, so I did.
Seen the original model but it was not made to fit around the original displate offset mount. I bought this already in the past and had it installed on the wall already. Made it so it easy slides around and holds the LED strip. Made the…
Luke R did a great job with his model, but I had a whole stack of 6x3mm magnets that I wanted to use so I didn't have to buy more, so this allows you to choose how many. My posters are hung using 10 magnets due to being on a sloped…
A model designed to make the protective leaf with the magnet more secure on the wall or to be used as a base for the Magnet to replace the leaf. The Support variant secures the leaf on the wall, the mount variant is supposed to have the…
For when the protective leaf fails and you need it to be fastened better, for me in the case of a 45 degree wall.
So, I was building the enclosure for my 3D printer (P1P), and I had not decided yet what to use for the side panels. I looked around and saw two displates laying around, and I thought : " what if ? " I grabbed one, put it next to the P1P,…
Long story short, my large displates wouldn't stay up on my walls with the included magnets since my walls aren't perfectly flat. These wall mounts are sturdy and work great for holding up these awesome metal posters. They're mounted…
This is a model I whipped up after a move to avoid shelling out money for replacement magnets from Displate and also make use of some magnets I had lying around. It uses a dovetailed Command strip holder part that mates into a housing…
Support for the Displate magnet and protective leaf on a wall where it usually not available to stick to. Nail it to the wall -> apply the protective leaf -> apply the magnet -> put your Displate.
This is an alternate wallmount for a metall displate. You have to stop the print at Layer 17 with 0.2mm layer hight to put the 10x2mm magnets in.
For those who already have a hook or nail on the wall. Compatible with 80x80 mm self-adhesive magnet included with each Displate metal poster Printing instruction “Normal” settings, 0,2 mm layer height, 100% infill I printed this in PETG.
This is meant to make the magnets reusable instead of waste once the stickiness wears out or you make a mistake. Mount with the bare magnet side outward, This is a friction fit, and it works. Be aware that screw holes are not countersunk,…
Easy to make magnetic mount that i used for a piece of art that a friend got me. This is cheaper than buying those sticker magnets. Last i checked it was $16 for 3 plus $14 for shipping and handling. Those ones aren't even reusable :/…
The Mount is 84mm x 84mm x 8mm large. The mounting bracket itself has the dimensions of diameters, up to down, of 2mm, 4mm, 8mm, 12mm and 16mm with head thickness of max 4mm. Version 2 supports screws head diameter up to 10mm. Category:…
Made for textured walls that the displate stickon magnet does not stick to very good. Can be hung with a single screw just like a normal picture frame.
I wanted a thin baseplate to attach the Displate Magnet, since the original protective leaf wouldn't work for me. You can stick the magnet on the baseplate and than mount the baseplate on the wall using screws, nails or double sided tape.…
Backlight for Medium Displates Description: This 3D-printable project adds a fully customizable LED backlight to your medium-sized Displates, powered by an ESP32 running WLED. The design is modular, easy to assemble, and ideal for setups…
Displate magnet holder / adapter
I had issues with the original Displate magnets staying on my walls, so I designed this low-profile mount to fix that. It’s 4 mm thick , so the plates are as flush to the wall as they can be, and by using foam grip tape the posters won’t…
Motivation For Christmas I got a special present from my son: A 45x32cm photo printed on metal sheet by displate.com For mounting this poster, a 80x80mm magnet needs to be glued to the wall. The magnet then can hold the metal sheet paster…
Changed it to use 10 mm magnets. Didn't change anything else, so there is a bit of wasted space/filament. Also re-added the groove for a thin rubber strip. I had roll of 10 mm wide and 1,5 mm thick, so that's what fits.
Fits to the Original Displate Mounts, 80mmx80mmx3,1mm The Model is designed in a way that you have to pause the print right before the last layer. Then insert the Magnet in the correct orientation (see picture) and resume to print the…
I wanted a thin baseplate to attach the Displate Magnet, since the original protective leaf wouldn't work for me. You can stick the magnet on the baseplate and than mount the baseplate on the wall using screws, nails or double sided tape.…
This is a replacement reusable mount that uses 8x3 neodymium magnets and rubber feet to hold the poster in place. The mount is held onto the wall using command strip style wall adhesive strips. The thin mount keeps the poster flat with…