Liczymy pasujące modele…
This is a set of accessories I designed for my Telescoping Mast. It contains 2 parts that will make your fishing pole easier to set up in the field. The pole this is designed for is the Goture Goldite 7.2 meter pole:…
Wydruk około 0,79 €–0,97 € nettoWstępna wycena jednego wariantu
I have been looking for a Bigfoot statue scan for so long which looks good, and matches the bigfoot statue at my local J&J's. @itsprestonm 's scan was the best I have found so far, but was a bit rough and unedited. I fixed it up a little…
Other requirements: 1. Gearbox (would be ideal but could also be used in a different way) 2. cylinder with no holes. 3. arduino or other fire control unit . (will work without it, just not efficiently at all.) 4. Air valve (I used one off…
This amazing 3D scan was made by Oliver Laric: http://threedscans.com/lincoln/aphrodite/ I sculpted and remeshed the scan and scaled it. The picture above is of a 3D print made on our FlashForge Finder, the print was painted light gray…
I came across a nice 3D scan of an Aphrodite sculpture, it's from the Cast collection in Zurich by Vincent Schmid: http://www.123dapp.com/catch/Aphrodite/3606512 I rescaled the model, sculpted and repaired parts that weren't meshed well…
There were a few errors with the meshes so parts were becoming separated and broken, they don't now. Also they are STL now instead of 3MF.
This is a Mediterranean house gecko toy. Yes, it is yet another gecko. More importantly, this model introduces a new type of joint that I have been working on for ... an embarrassingly long time, which I have very cleverly named FDMJoint.…
I saw that the original Rocke Engine for the XL has a significant issue that keeps coming up when you slice it. It shows as a model error. Turns out to be a ledge that it looks like two models were joined. I just removed the insides of…
Original Creator: https://www.thingiverse.com/thing:3388750 (All files are already in 50% Size!) i edited the original cube so you can print it in 50% Size and made some small improvements like: Logo looks more like the original. Added…
Model of Aphrodite: Printed with Prusa MK3S+ 0.1mm needs support
Źródło oznaczyło ten model jako treść 18+.
The original dragon burner ADXL mount needs a longer M3 screw. so I adjusted the mount with a sunken screw hole that uses the same m3 screw. !!DO NOT OVER TIGHTENING!!
updated! edit jan 8-9 2020 I had to edit a few files nothing major but improved the spacing on the doors so if they expand in printing it will be little or no sanding as well as edited the gap on the dungeon stick short and long walls so…
Ok this is an expansion for https://www.thingiverse.com/thing:3764187 and contains only some of the parts used to design the ship lay out in the pictures this could be used for a power plant a nuclear submarine or a scifi moon base enjoy…
edited model with enough space for chassis parts and holes for instalation added SL1S print profiles
3d warehouse to stl. Instructions Just print and enjoy. Category: Sculptures
Printed with PLA filament: Silk Gold Silk Magenta Silk Red Green Glow
artschool cleard AI cretion lesson fic nomanifold on FaceMeshes prints well in 0,2 layerhight HAVE FUN
Źródło oznaczyło ten model jako treść 18+.
Źródło oznaczyło ten model jako treść 18+.
prints in up to 0,3 for fastprint 20min use 0,15 to get the details Have Fun Please see the other fre stuff here in my account
This is an ant nest based on the Wakooshi Venus Nest. It holds 4 test tubes and has a small outworld. For 150mm x 16mm tubes Print the nest and lid at atleast 10% and the smaller parts at more than 30% 0.2 layer height Print the mesh…
Qiditech X_Plus_3 OG Front Cover
I took the models from: https://pdb101.rcsb.org/learn/3d-printing/3d-print-hemoglobin and sliced it in two parts. Then I added four holes (I modelled the holes for 10x2mm magnets but I used 3dprinted pins). The original Parts are also…
We received new pick carts. They decided to change the distance of the hook for the labels. I slightly stretched the design to accommodate the new distance. I converted the original mesh to polymetric so I could edit it in Fusion 360. I…
An edited model of the original arduino ventuno Q to add 4 mm on the lower part so that the components do not touch
This is a Base Plate and Loading Ramp to speed up magazine loading when using the Ludex Glock Speed Loader available from Amazon. There are two .STL files, one includes holes for 4mm screws/thumbscrews to secure the Ludex unit to the…
die hinteren Fender angepasst. the rear fenders adjusted.
This statue is part of an extensive series of ancient copies based on a very famous original (now lost) from around 400 BC, attributed to the sculptor Kallimachos. Aphrodite (Venus to the Romans) holds an apple in her left hand, the prize…
I was boring whe stay at home so decide made this remix of Milo. Head of the Smudge cat i made by myself in blender. Stay home, stay safe, print usefull and stupid things! Original model was: https://www.thingiverse.com/thing:1892710 My…
time 1h9m on Bambu P1P. 30.38g. default setting on printer
This drawer catch can be used on @DiTechFab's Mini Toolbox to prevent the drawers from accidentally sliding completely out. The design allows the drawers to be removed when desired by pushing up on the spring clip, and installed with a…
This part is designed to clip into position above the bowden connector on a plus 4 3d printer to add a radius to the PTFE tube and hold it off the glass lid when used. Testing has shown there is sufficient radius on the filament to allow…
Remix from: https://www.printables.com/de/model/425667-wall-mount-for-fire-tablet-hd-10-11th-gen-2021-cab For: The this Modell “ Medium Printer - Two Parts ”…
The models I created: A new axle to fit the new bearing A ring to fit around the bearing and inside the wheel A clip for the axle to not slip off the original model. (I had a problem of the wheel falling off the pully mount) PLEASE…
atelier-louvre-head-of-aphrodite repost of https://www.myminifactory.com/object/3d-print-head-of-aphrodite-at-the-runion-des-muses-nationaux-paris-14386 Category: Sculptures
Aphrodite Fortnite Skin
The modest size and crisp white colour make this cast of Satyr and Hermaphrodite stand out in the display on the western side of the Cast Gallery. The sculpture depicts a struggle between the two naked figures, though it is not entirely…
The Rat model used by the game Old School Runescape from 2004 – 2005, with an edited tail for printability. [The in-game model uses entirely flat polygons for the tail] Recommend printing it with the bottom of the rat to the plate, with…
I printed at 0.2mm layer height, 5% infill, 2top/3bottom layers, and a 6mm brim. Prints perfectly.
This 3D model is a meticulously designed replacement housing for the Ditec GOL4 gate remote control. It features a robust and ergonomic structure that perfectly mimics the original remote ensuring a seamless fit. The model is optimized…
prints in fdm Have fun
Joining two height maps, one of the relief and one of the sea depth I realized this mediterranean sea basin model. the aim was to see the coast during the ice age, lowering sea level by 150 meters as claimed by experts. It would be…
Ash vs Evil Dead - Deadite Grandma 3D printable model.
Źródło oznaczyło ten model jako treść 18+.
3 part clip easy to assemble all files are modified so ot doesnt work with the original parts follow the instructions on th original post, but instead of using filament cut to legth a paper clip and bend bouth sides so it dosent slide
Edit 2026 - added a new model which doubles the thickness of the walls to 2mm (four walls) - should hopefully add a bit of resilience! As the guy stuck with maintaining our communal driveway's gate (how? why?) I was getting tired of…
Aphrodite Bust is a detailed 3D printable statue inspired by Aphrodite , the Greek goddess of love, beauty and desire . The model portrays Aphrodite holding a bouquet of blooming roses , wearing a delicate floral wreath and flowing…
I used 60% infill but not necessarily needed.
A travel case for DJI flip, (not my model btw)
Hermaphroditus was the child of Hermes, the Greek messenger god, and Aphrodite, the Greek goddess of love. Hermaphroditus was both a man and a woman, their name is the base for the term hermaphrodite - a person or animal with sexual…
This “cut with bolts” should be used only as additional fixation. You should still glue it.
For storage off batteries Bosch 12Volt
APHRODITE greek mythology figure Recommend to print minimum 160mm height Printed on SLA Printed with FDM as 80mm statue (works bad, there is some cracks and errors, also removal support is almost impossible) Image and renders made with…
all instructions for assembly can be found here https://www.printables.com/model/920992-creality-k1c-k1-front-chain-riser-12mm ^ That is the original creator and i only made some small edits that i found helpful for my use case YOU may…
Edited rod to have smoooth movement of whole thing from > https://www.printables.com/model/1065442-traditional-czech-eas
Printed with silk PLA magenta
Deadpool on a Vespa Scooter with Sidecar Edit 22/04/'26: Finally had the time to work on the model, since the original AI model had several flaws (such as the wheels on the scooter not being in-line). I've cleaned up the model a lot and…
Dobré ráno, Vítejte na mém profilu, plném modelů a miniatur :-) Mám pro vás drzák na Airsoft pistoli. Je scela neviditelny, a tak neruší dojem ze zbrane na zdi. Držák je vhodny na pistol Glock 17/18/19. Vytištěno bez podpěr! Pokud vás…
A dispenser for plastic razor blades. (40x18.5x1.8mm³). Splits open for easier loading and has a lid. No supports needed
My take on possessed Henrietta from Evil dead 2. There are two files available, a small version that fills the build plate of an X1/P1/A1 and another that is 500mm long from the back of the neck to the tip of the jaw, this version has…
This is a re-upload of my edited neck of the Guitar Hero controller made by McDade01 on Thingiverse.
Really simple wall mounter holder for the Entrematic fob that allows access to both buttons while still in the holder. Can be inserted and removed easily. Its held to the wall using one 3mm countersunk wood screw. Functional print so I…
Bring a little piece of Italy to your home with the Lemon Gioiello Tray 🍋💙 This compact jewelry dish is inspired by traditional Sicilian tiles and the ever-iconic lemon slice motif. The deep cobalt blue and intricate embossed patterns…
Edited the height of each module connector so they would fit into a 220mm build area printer. Ran into a slight issue of some filament spools being too tall to fit in-between the filament support rods. So I edited the filament support…
Step into a world of ancient beauty with this detailed sculpture of Aphrodite, gracefully poised amidst the remnants of a once-magnificent archway. The intricate steps, crumbled stonework, and gentle folds of her attire portray a sense of…
I had some issues with the middle part snapping off at a party. so I made it a bit stronger. by adding a core to the middle parts, and a fillet where it snapped off. print without supports
Rotated model removing 2mm of material to allow it to sit flush on the print bed. You will lose the soft edges on the back side from the original but the benefit in reducing post print processing was a winner for me. Print without…
Coffee knockbox, slightly modified to have larger volume.
Ředitelka Eliška z knihy ON-LINE ZOO. Kniha je volně ke stažení ve formátu pdf i mp3 na https://knihy.nic.cz#zoo. Kniha ON-LINE ZOO seznamuje nejmenší čtenáře se základy bezpečného chování na internetu. Tvorba modelu byla realizována v…
White hello kitty plush with no bow
Modified the arm to be longer. Will crash into the screen if in use. Moved to Klipper so don't need the screen anymore. Because I added a second cooling fan I could not see my prints anymore. Also modified the camera holder to support the…
print the gutter end cap and this plus what the legs need to be made. also you need all of the basic board stuff.
It's a nice model that doesn't require supports and is great for organizing your stuff! Also has gridfinity on the bottom.
Edit 4-11-24: Found that I didn't have the nut cutouts on the main body deep enough, resulting in it hitting the hotend insert when the belt clamps were screwed in place. Revised to make the holes deeper (so the nuts insert farther,…
Das Badische Landesmuseum in Karlsruhe stellt zunehmend Ausstellungsstücke in digitaler Form zur Verfügung ( katalog.landesmuseum.de ). Die 3D-Digitalisierungsstation wurde mit Mitteln der Klaus Tschira Stiftung finanziert. Viele dieser…
zatka riditek pro babettu 210 a 207, funguje bez problemu.
Minecraft waffle from eggs waffles
This is a simple holder with magnets for the Ditec Zen4 garage opener to be used in the Hyundai Ioniq 5. Download the scad and use OpenSCAD ( https://openscad.org ) to adjust the variables to suit your needs Draw on support at the overhang
Just a few tiny improvements to an already esxcellent model
These are stands and tools to work on your aprilia SR50 fuel pumps! The round part with the square hole can be used to lightly tap down on the fuel pump cover to help work in some silicone lubricant for removal. The stands just help you…
support de capteur d'humiditer de aliexpress : https://s.click.aliexpress.com/e/_olXxvYW j'ai laisser le plus d'espace a l'arrière pour avoir le plus de donnée. n'hésiter a me contacter pour des question .
This is a remix of: http://www.thingiverse.com/thing:588423 I used the ShrinkSmooth brush in MeshMixer (free at http://www.meshmixer.com ) to edit the surface, and some other brushes to edit the face and tail of the model. I remeshed it…
Dodaj odrobinę ponadczasowej elegancji do swojego projektu lub wnętrza dzięki tej pięknej sylwetce bogini w stylu klasycznym. Otoczona okręgiem postać ma delikatne, falowane włosy, wieniec laurowy symbolizujący mądrość i małe serce na…
i add my name and credits to the owner who make this case
This is a model to help you find your way between week A and week B. Il s'agit d'un model pour se repérer entre les semaine A et les semaine B. Dies ist ein Modell, das Ihnen dabei hilft, sich zwischen Woche A und Woche B zurechtzufinden.…
Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 15% Filament: PETG It is printed in multi-color with manual filament change at layer height.
Hi, 🙂 And now I’m sharing the cherry blossom tree I created with you. I modeled the bare tree myself. / It wasn’t hard, but fiddling with the pins was a bit of a hassle. 😅😂 I created the flower using AI and then tweaked it. Yeah, it…
photogrammetry model of chlorophyllum molybdites before the vale breaks. photo is of the 3d model before making print ready. haven't personally printed yet. my first model. will update if successful
Power connector cover, edited. Now wires go more easily. Using this in my printer. Print Settings Supports: Yes Category: 3D Printer Parts
a normal looking tv stand and a good friend
Remix of the pump grip parts from Dan's Battle Cannon mod, found here: https://www.thingiverse.com/thing:3058433 Too lazy to machine internal priming bars, so I made it longer and added holes at the back for bolts. Not sure what size…
![Old School Runescape Rat Model [with edited tail]](https://media.printables.com/media/prints/734892/images/5745147_396f5808-a9df-4025-a8b5-e23cf1337b3f_8d144ebb-5ec4-41c1-9781-6dfa96fd22af/pxl_20240123_100450142.jpg)
