1017 modeli
Update 2024-05-15: There is a new version that includes two side ramps for additional rainwater collection. It's available for the 2"x3" and 2 5/8" × 2 5/8" sizes so far. Update 2025-03-04: Added a “bare” outlet adapter to use as a base…
Wydruk około 0,79 €–0,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
ARL-99 HELLDIVER From the Japanese multi-media franchise PATLABOR: The Mobile Police, the ARL-99 HELLDIVER is a Labor used by the Japanese Self-Defense Ground Forces, manufactured by Shinohara Heavy Industries. The OpenFigure3D version…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
So the whole idea here was to, rather than have the gutter just be cut and dump all the time into the rain barrel, instead to give me the option to have the water go one way or the other. I fugred a simple flipper flapper doo dad would be…
Wydruk około 12,23 €–14,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a opener tool for a Citizen ProMaster Aqualand Divers Watch, size medium/ladies. Derived from the Parametric Watch Opener Tool from @BikeCyclist .
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
it is a Little Experiment. This Video Explained how it works. (Not my Video ;) ) All you Need is Filament (works Fine with PLA and PETG ) a PETG Bottle and one or two Paper Clips. Put the Paper Clips through the small hole to get the…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
I modeled this to replace the handle for my diverter valve on my Strong Spa 5 person hot tub. I printed this with SUNLU PETG color black but used the Prusaslicer “Prusa PETG” settings to print it. No supports needed. I bought the hot tub…
Wydruk około 0,47 €–0,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a companion to my Downspout gutter diverter for rain barrel , which allows you to send the overflow of the rain barrel back into the gutter for easier management. There is currently one size available, but message me if you'd like…
Wydruk około 0,79 €–0,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
DE: Habe eine Reihe Kisten in denen ich allerlei Bastel-Utensilien aufbewahre. Da sie sich viele ähnlich sehen, brauchte ich die Schilder. Brachte sie mit Doppelklebeband an. Die GCODE Dateien sind mit 0.2mm gesliced. Es steht Ihnen frei,…
Wydruk około 2,28 €–2,79 € nettoWstępna wycena jednego wariantu
Scuba save-a dive o-ring set for most common sizes (11 slots) AS003 AS010 AS011 AS012 AS013 AS014 AS015 AS111 AS112 AS116 AS214
Wydruk około 2,15 €–2,63 € nettoWstępna wycena jednego wariantu
I made myself corner water diverter as because of poor design current water divert does not keep all water away from wooden base, especially in corners, wood under does not like to be wet! Can be glued in place using silicone or montage…
Wydruk około 0,96 €–1,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple stamp based on vector logo, can be used to stamp things. Final effect will depend on haw you'll press it, which and how much paint will be used. Try it first on test surface, that will be similar or the same as the final one. Based…
Wydruk około 1,85 €–2,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is for an old Jacuzzi pool sand filter diverter valve model 24LT3 from the mid 1970s. I don't expect much downloads but I hope it helps someone save their functional filter for another decade since parts are no longer available. The…
Wydruk około 11,29 €–13,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A 1:12 and 1:48 scale Helldiver miniature! This model is 1 of 20 poses available in the full set of miniatures currently available on the Galactic Armory Patreon until June 1st 2024: https://patreon.com/galacticarmory The full set is also…
I pulled the 3d model from the game and started modeling it, because nobody should have to pay for 3d models here it is, in its unfished glory! A few more edits will be coming, however if someone can get this version to print (I'm getting…
To redirect the filament waste downwards The waste diverter should be printed from ABS, ASA or HIPS otherwise the hot filament waste can get stuck in the diverter -------------------------------- Der Abfall Umlenker sollte aus ABS, ASA…
Spread managed democracy across the galaxy and display your allegiance with this Helldiver Dogtag approved for FREE download from the Super Earth Ministry of Truth. The SELLING of this print is NOT APPROVED by the MINISTRY OF ARMED FORCES…
I have found some hard edges that were supposed to be smooth V1.1 addresses most of that. If I find time, I will try to fix the air intake holes, there are many broken triangles hiding inside I have it printed! Scaling it to 1000% was a…
The Model is scaled to MY head. You will need to make your own measurements and scale it to yours. I have a big head so you have been warned. The parts have non manifold edges you will have to right click them and repair them in the…
Eagle back from the nest! Help spread managed democracy throughout the stars, by printing out and assembling this model kit! Based on the Eagle multirole fighter from the video game Helldivers 2 . A fairly detailed model compared to past…
Helldivers skin adapted to Dummy 13 frame. The original Dummy 13 frame is required, with these changes: print two more “frame clavicle v3”. replace the “frame neck” with the “short frame neck” version. replace the “frame hips” with the…
This is the second iteration of my Bile Titan print from Helldivers 2
Plaque for the 500kg Bomb stratagem UPDATE: 3/4/2024: Added STL files UPDATE 3/5/2024: Added V2 files that includes some fixes for misc. symmetry and centering of objects, as well as updates to the stratagem model itself to be more…
I designed this deep sea diver helmet from scratch on Shapr3D. It is not an exact copy of any particular helmet but elements taken from several different ones. It is a detailed model and best printed on an SLA (resin printer). Could be…
I loved the original dog tag so made a variation on the theme using the Hell Commander rank badge. Printed on a Bambu Lab P1S with the 0.08mm extra fine setting, iron top layers.
This model is outdated, see the new version here https://www.printables.com/model/1165651-scuba-diver Making of This diver was a request by a friend of mine. It was given to him by his late father and wanted a copy of it that he could 3D…
Collection of 29 Helldiver helmets that were pulled from the game by the hard working folks at The Helldivers Archive! I merely converted the files to STL and fixed some errors for printing. These files may contain errors, and require…
This Collection was pulled from the game by the hard working folks at The Helldivers Archive! I merely converted the files to STL and fixed some errors for printing. These files may contain errors, and require editing. Dropship, Commie…
I have created a simple CAD model of the P - 2 Peacemaker This is my first model in this direction, so I don't have a lot of experience yet I would be very happy about feedback as I said I don't have much experience yet and if there are…
For Democracy! Charger with Behemoth var, Hunter and the dreaded Stalker! This Collection was pulled from the game by the hard working folks at The Helldivers Archive! I merely converted the files to STL and fixed some errors for…
Autocannon, Flamethrower, Autoshotgun, Pistol, LAS-5 Scythe and the Strategem Ball!
Be careful when removing supports on the right arm, it is sort of weak and can break easily.
now you can make the best gun in the game. uses a 1/4 in dowel as support .may need sanding and gluing. Category: Props
Description Helldiver remix using Dummy 13 version 1.0 frame. Much more poseable than the first version and accessories included. Printing: For the frame parts, print with ABS/ASA/PETG. Do not print the frame with PLA. 0.4mm nozzle, layer…
Helldivers 2-Fanart bust Personal fanart work from the game Helldivers 2 There were some deviations when making the model, so I just made it an original armor. But still democracy. Due to different printing environments, the finished…
Wanted to make a helldivers cosplay for comic con, found this great model by ZerekMasters that looked perfect. However it had some problems like too many polygons and other misc. errors. Fixed the models up in OrcaSlicer and sliced them…
Making of This diver was a request by a friend of mine. It was given to him by his late father and wanted a copy of it that he could 3D print. I first dusted the original (shiny black) plastic with the dirt by my door and set up a…
Second iteration of my Charger sculpt from Helldivers 2
Model improved from my previous iteration
This is the fan art of B01-Tactical armor from Helldivers2. The item is a .stl file for a chibi character, designed for 3d printing. Feel free to edit and use it as you wish. Also check out the mechs you can sit the little guy in! EXO-45…
Pen holder in Helldivers 2 style.
Liber-tea mug modeled like it's made from a 40mm grenade casing. Did make it a little large (more of a stein than a mug) but it can just be rescaled to whatever size you like.
Plaque for the Orbital Laser stratagem UPDATE 3/4/24: Added STL files UPDATE 3/5/2024: Added V2 files that includes some fixes for misc. symmetry and centering of objects, as well as updates to the stratagem model itself to be more…
Accurate logo recreated from scratch in Fusion 360. https://www.arrowheadgamestudios.com/
I love the model so much I wanted to gift a printed version to a friend who got me hooked on the game Helldivers 2. To make sure he could fully assemble and display it, I wanted to include the stand in the kit for him. This is the result!…
These canards were designed and oriented with inspiration from other functional designs for sale. The canards were designed to be printed standing up on the narrow end. It's not the easiest print because of this, but I didn't want the…
! The model shown in the picture was painted ! Already print-ready. The parts need to be glued together, while the connector helps to find the right position for gluing.The print plate model is a bit tricky to clean up and there will be a…
🌊Introducing the Dive Torpedo Toy!🌊 As soon as it hits the water, this torpedo toy springs into action, filling up and sinking to the bottom within seconds. Print Settings: Use safe and durable filaments such as PLA, PETG, or ABS (I used…
Alrighty, this should finally be wearable now! It's a large model that I have no clue how to cut up to be printable that aren't just clean cuts from PrusaSlicer. The fins are exactly the same as they were in the previous version of this…
Knee/Shin plates for the right leg, mirror the model for the left leg. Model ripped from the game and cleaned in blender
How 'bout a nice cup of LIBER-TEA?
I wanted to make a small portable phone stand that was always on hand. This is a print in place file, no support required. Set your printer to at least 50% infill and pattern side up. There will be a slight fusion of all moving parts…
split for smaller printers, may updated once the warbond is officially opened and i get a better view. takes a ½ in dowel Category: Props
helldivers 2 deployment capsule, use it as a coaster, to distribute democracy as it should be with your energy drink or your beer, you have up to 4 coaster redeployments.If the model is accepted, I will make more versions that I think…
Pre-ordered the HD2 themed PS5 controller so I wanted a cool stand for it. Found 2 files by some talented designers and merged them together & this is what I came up with. *Also works with PS4 & Xbox controller, see images. Layer height:…
This marble run piece will split marbles entering it into two different paths. Multiple of these diverters can be connected to send marbles onto as many different paths as you want! This should work with almost any marble run set (ours…
Firstly, All credit for this model goes to Arrowhead Game Studios & Sony Computer Entertainment My son is a big Helldivers 2 fan and I originally sought and found a model but unfortunately after repeated attempts (printing it upside down)…
Becoming a helldiver shouldn't cost you all your hard earned super credits! So grab your helmet and get into the fight!
This is an original design for a 2x3 gutter downspout. It traps and diverts rainwater from a downspout into a rain barrel. Creating rain barrels is a great tool to collect and save rainwater for your home gardening needs and hydroponic…
Modeled using Blender and Scaled to Budwin's Sizing Head number 3 you can find Here Have not printed this as of yet but I have split it just waiting on Filament. be aware the top helmet portion is quite thick at the top may rework that in…
Plaque for the Eagle Airstrike stratagem UPDATE 3/4/24: Added STL files UPDATE 3/5/2024: Added V2 files that includes some fixes for misc. symmetry and centering of objects, as well as updates to the stratagem model itself to be more…
Looking for an efficient rain water diverter on a pretty busy 100mm (DN100) downpipe at my house I found that the few models that came close to my expectations were in the price range of 80 to 180 Euros. So I decided to make my own. Due…
I always wanted a spool with the following features: lightweight but still strong enough holds at least 15 m strong , thick cord can fit the thumb in the middle hole even when wearing a neoprene glove compact enough to form a loop around…
Thigh plate for right leg, mirror model to get the left. Model ripped from the game and cleaned up in blender.
“For Democracy! During your last drop, you recovered the tags of two fallen Divers. One of them had met their demise at the talons of a Shreiker and the other, well…that's classified and was absolutely not friendly fire.” This is my take…
This model is approximately 90mm wide, 140mm tall, good for small fish, but should easily be able to scale up. There are several overhangs requiring support, so I may return to this project to divide the model into more easily printable…
If you go in service mode and your Tesla says VCFRONT a210 coolant Valve Calib, you will need this tool to rotate the 5-way valve so it meshes with the actuator. You will also need their software called Toolbox and either a special cable…
Cartesian pacman ghost diver Recommend materials: PLA, PLA+, PETG Print infill: 100% Control the floating, sinking and rotating of object by changing the pressure in the liquid. Archimedes' law Archimedes' law is a physical law of…
by Frozen-engineering is licensed under the Creative Commons - Attribution license. posted here for ankermake
This remix allows diversion of water from a gutter downspout (common US 2in x 3in size) to a garden hose (3/4in GHT hose fitting). Great for channeling water in a different direction, to a rain collection barrel, or a garden. It maintains…
Getting Ready for the Halloween 24 season I have started designing and making some things to print. I wanted to print a topper as I am running a pirate theme this year for Halloween 24 license to match original Creator Peter Farell Octo…
Mechanical keyboard version with the Helldivers 2 logo on it. 0.15 layer height, 0,4mm nozzle I used Sunlu White PLA Print as it is with supports.
Designed a Hellpod base from scratch in blender and converted it to a PS5 controller stand for my HD2 themed controller. *Also works with PS4 & XBOX controllers. (see pics) This is one of my fist models done in Blender, I feel it turned…
original https://www.thingiverse.com/thing:6503180
A plaque for the Orbital 380mm Barrage UPDATE 3/5/2024: Added V2 files that includes some fixes for misc. symmetry and centering of objects, as well as updates to the stratagem model itself to be more accurate to the in game version.
Model courtesy of the excellent folks at the Helldivers archive, uploaded as an STL for your optimal printing experience
Show your elite social status with the Super Citizen dog tag! Printed on Bambu Lab P1S 0.08mm extra fine, top layer ironing.
Some modeling practice I did in Blender, today a Charger from Helldivers 2!
2 models. One for single filament swap, the other one(_3colors.3mf) for 2 swaps.
The Focke-Wulf Fw 190, nicknamed Würger[b] (Shrike) is a German single-seat, single-engine fighter aircraft designed by Kurt Tank at Focke-Wulf in the late 1930s and widely used during World War II. Along with its well-known counterpart,…
Simple Helldivers 2 themed keychain. change filament color for last 3 layers, easy peasy
The G-16 impact grenade from Helldivers 2! I tried to model it as accurate as possible, and the size should be correct. If there are issues I will go in and touch it up.
Show off your super elite status, Zim would be proud! Only the very few reach the dizzy heights of Super Private. This is the perfect way to reward your victories over the scourge that plague our Super Earth. I once heard somebody say…
takes a couple of pieces of 1/2 rod. file is split for smaller printers. Category: Props
So I took the helldiver helmet and put a stick in it. thats about it lmao Edit: I re did the model a bit. all i did was make the ball joint and the helmet 1 piece instead of 2.
I don’t think freedom tastes very nice if you’re an enemy of the Helldivers. It largely consists of shotgun shells, missiles, and a sprinkling of napalm. I’m starting to think “how’d you like the taste of freedom?” might be a rhetorical…
TAKES SOME 1/2 IN AND 1/4 IN RODS. MAG IS RMEOVABLE. SPLIT FOR SMALLER PRINTERS. Category: Props
turn you dummy 13 into this epic helldiver dummy. that is a perfect addition to your dummy 13 collection. you will need to make the frame pieces.
Inspired by: https://www.thingiverse.com/thing:2463713 A more agressive Version of the Original I re-designed the whole thing from scratch, so measurements will differ, i also taylored it to materials i use for the hook hangers ect. Main…
A great wall art of a diver. Do not forget to LIKE the model and upload your makes, thanks ! Inspired by a sticker
Scuba Dive holder for camer and light Im print PLA NEBULA
takes some 1/4 in rods for the handle and rod for the hinge. could use 6mm x 2 mm magnets for the mag as the hole is around 6mm/0.24 inch. had a removable mag, and is split for printing. Category: Props
Keycaps for Helldivers 2 strategems Inspired by the plaques of Cysterion
This simple remix was created for CarcanoM38. The original stand was created by Cura9. This is an easily printable low-poly stand for model ships or rockets. The Helldivers logo has been engraved into the front plate and the top mounting…
Made this out of request, should fit a average sized head. Split for smaller printers. This is the way to spread democracy. Category: Props
A plaque for the Autocannon support weapon
A great wall art of a skydiver. Do not forget to LIKE the model and upload your makes, thanks ! Inspired by a sticker
A plaque for the Orbital Railcannon Strike UPDATE 3/4/24: Added STL files UPDATE 3/5/2024: Added V2 files that includes some fixes for misc. symmetry and centering of objects, as well as updates to the stratagem model itself to be more…
hell divers 2
HANDLE HAS A FITMENT ISSUE, IT WILL FIT IF YOU SAND OR FIDDLE WITH IT It's almost a 1:1 recreation of the LAS-7 Dagger from the game Helldivers 2. The only detail it's missing is the grip, where I could only manage to make it smooth,…
![Scuba diver [OLD VERSION]](https://media.printables.com/media/prints/762079/images/5938852_a3a16ea1-064b-40fd-8cd9-3b230b90ccc7_76b5d0b5-da2b-4f98-9f3f-544cd67d90ea/large_display_pxl_20210726_070126328.webp)
![Dive Torpedo Toy [No Supports]](https://media.printables.com/media/prints/767379/images/5974251_8e66d367-0d90-4154-a72b-b37b631f00d4_d903432c-7cda-4c49-bf63-c3bb1d0571a9/untitled-v52-1.jpg)
