228 modeli
Hi Fellow Creators, I wanted to upgrade my old Ender 3 Pro with Dragonfly Hotend BMS. There was no appropriate Fan Duct so I create one, and now I'm sharing it with you. Dragonfly Hotend is low, and take a lot of space, so the fan is thin…
Wydruk około 0,75 €–0,91 € nettoWstępna wycena jednego wariantu
A Satsana variant that works with Dragonfly BMS and a 5015 fan with the ABL mount removed as i couldnt find any without the ABL so i removed the one from this and thought others might need one aswell. I reccomend printing this with the…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Stencil: Dragonfly
Wydruk około 0,84 €–1,03 € nettoWstępna wycena jednego wariantu
The Voronoi patterns flash contest immediately made me think of insect wings, and so this dragonfly was born. This snap-fit model features posable ball-jointed wings and an elegant display stand. Print Settings Print files are divided…
ATTENTION: as of 1/21/2026, The Phoenix FPV Drone has been "modernized" to compete with my other 5" drone, the Leopard. Though I maintain that the Leopard is slightly tougher, and the Dragonfly is slightly lighter, you need only choose…
this pack add dragon fly wings on your dummy 13 figurine
This is a dragonfly pendant that I designed. It was done with a Celtic style weave in the wings and tail. I printed with a couple of filament swaps to make the weave detail more prominent, and used silk PLA to catch some extra light. Enjoy.
I wanted to create a dragonfly model since my daughter and I found a dead dragonfly this summer. The overall proportions are based on the one we found. I tried to create a pattern for the wings which is similar to the real thing but with…
This is a digital 3D printable kit card of Dragonfly! Kit cards are fun, all-inclusive 3D prints that are printed flat and then assembled. This compact, 3D printable design combines the concept of a postcard with the joy of 3D printing.…
Once you print the sheet you have to break the thin tabs that hold them together and then you can assemble them as a puzzle. If you need a cheat to figure out how to put the pieces together correctly you can watch the assembly animation.…
As I created the Lucky 13 version I was asked if I could add a version for the Dummy 13 so here it is! No supports required.
Designed for injection molding, but you can 3D print it too :) Use 0.15mm or 0.10mm layer height, since the model is 1.5mm tall/thick. Support If you'd like to support me for the 3D models I distribute for free, you can use my AliExpress…
Dragonfly Earrings 0.10mm DETAIL Change color to 1.7mm
Best at this size, going too small loses detail. Created in ZBrush.
See the following link for video demo. See assembly instructions in photos. Adjust the offset angle between the cams to change the configuration in which the wings flap. Design intended for .4mm nozzle and <.3mm layer height. Use organic…
This is a dragonfly I created in Fusion 360 for a decoration on our fence. I am currently printing them out now, 1st one came out great, on to the second. The print time is around 24 hours when increasing the size by 216.5% on a Creality…
Scale to your liking. Pretty Delicate piece so be careful handling.
Steampunk Dragonfly Figurine
Can I fly with you on your trips outside of the garden??? Made with love, for everyone who would like to feel a bit safer out there. Printed in golden e-Sun PLA on the Anycubic Kobra 2. I advise setting the infill at 70-100% to give it…
New design, assemble your cyber dragonfly, and we recommend using color printing! We have separated the wings, so if you have a multi-color 3D printing system, you can try combining the model for printing. We recommend using a body with a…
Dragonfly with 2 versions if you use the g-code please note that it is using a .2 nozzle. In general, this model works better with a .2 nozzle. Please check your slices before printing with a .4 or above.
Model with or without additional articulated tail Update: Added redesign model and stand version2 To print in place without supports Ball joints: head, wings and tail Include stand Tip: Once printed, to loosen each joint first moves…
This Dragonfly artwork prints without supports. I would advise printing at 0.3mm layer height. You should be able to see the strings in the slicer preview (in Bambu Studio set wall generator to Arachne). You can achieve the change in…
Coraline Dragonfly hair clip base for a Halloween costume a friend was creating for her little sister.
3D Puzzle model of “Dragonfly”. Model is made of 28pieces. Original size has each piece width of 2mm. Printing information: PLA or PETG 15% Infill is enough printing time is ~ 9 hours in case of origin size
This STL works better the larger you print it when slicing. After several tests with my .4mm nozzle the details weren't all visible until 180%. I like to keep X & Y at 180% and leave Z lower ~115% to keep them nice and thin (use .gcode or…
Statue Dragonfly tamer by Artec 3D Selective offset (thicken) of wings legs and straps. Removed uneven base and replaced it. Decimated by 90% and minimal surface smoothing.
Printed with no top and bottom layers and 15% gyroid infill.
Easy printable dragonfly form / mold for fishing Enjoy
The 6burner V5 has been developed after several demands for a slimmer case with aligned fans. It can be used only in bowden mode with different hotend installed (stock, microswiss, mellow, primacreator, …) and other like dragonfly. The…
Pantala flavescens, the globe skimmer, globe wanderer or wandering glider, is a wide-ranging dragonfly of the family Libellulidae. This species and Pantala hymenaea, the "spot-winged glider", are the only members of the genus Pantala. It…
This is a DragonFly BMS mount (from Phaetus hotend) for EVA v.3, include nuts and inserts versions. NOW for the 6 and 7 fins version, from Phaetus DragonFly BMS. UPDATES: · 2023/05/25 The 7 fins version is about 2mm longer, so I made that…
Shoutout to Puhsketti for inspiring the flight mechanics! I traced a dragonfly's wings to make this version. I felt like a dragonfly is the perfect addition to the butterflies! Use a lighter to twist the top wings only into a propeller…
home decor for stand on your office or wall mount for more models you san visit me on cults https://cults3d.com/en/users/Elite_Medo/3d-models follow me on my ig account https://www.instagram.com/3d.abd.m/ or on my youtube channel for new…
Butterfly and Dragonfly silhouette Aprox. 100x70mm dragonfly and 75x65mm Butterfly (1mm height). Scale it to your preference. Print setting: 0.2 Layer 20% Infill Not Supports PLA
I wanted to be able to attach the amazing dragonfly wings created by soozafone and be able to create an insect flyer Lucky 13 a.k.a. Dragonfly 13. So I modified the existing part and added 4 slots to attach the wings. No supports required.
Original of this model is made by Dariam and it is decoration which you can put in the flower pot.
COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG PDF Y OTROS FORMATOS DISPONIBLES EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE…
Paint the body with oil-based magic marker to make it pretty. You can make the wings with transparent filament such as TPU or PET. You can have fun making it freely with your kids! Mosquitoes consider dragonflies to be their natural…
Hair Ornament dragonfly remix from Art Nouveau Hair Ornaments Print Settings Printer brand : Creality Printer : CR-10 Mini Rafts : No Support: Yes Resolution : 0.2 Infill : 15-25 Software: Cura 5.2.1 Nozzle: 0.6 Filament brand :…
Icarus 2 has been released which is the current version and it has a number of improvements: View Icarus 2 here Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this…
ZA13-c wireless mod with Dragonfly F1 internals using original top shell. You only really need two screws and a 3D printer complete this mod. You might have to trim down the battery JST connector a little bit to get the Side button holder…
Cool balancing dragonfly toy to give as a gift to others… I printed it in: Creality dual colour silk green and yellow pla; Amolen dual colour silk red and blue pla; and Amolen tri coloured silk red, yellow and blue pla. I am also selling…
Support for plants. Plant Trellis. Total length 25 cm.
This dragonfly is a traditional toy, typically made from wood or bamboo. It can balance on your fingertip (or any other
A beautiful minimalist painting of a Dragonfly on the wall. Size 200 x 200 mm Print Settings Printer Brand: Creality Printer: Ender-3 S1 Pro Rafts: No Supports: No Resolution: 0,2 mm Infill: 15 % Filament: PLA Notes: Top/botton pattern -…
Modified the awesome dragonfly wings using the backpack accessory from the Dummy13 V1.0 https://www.printables.com/model/794637-dummy-13-dragonfly @KiTsuki If you want to update your version with this one (or your own take) I'll happily…
Icarus 2 has been released which is the current version and it has a number of improvements: View Icarus 2 here Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this…
This set includes a sleek dragonfly and its twisted counterpart bearing a skull-carapace. Perfect for dark fantasy worlds, creature collections, or tabletop games. These are intended for resin printing, and are not pre-supported. I've…
Combined the Voron Dragonfly BMO Stealthburner printhead with files from the Filametrix project. Tested/working on my Voron 2.4R2.
A simple test for ultra lightweight and robust bionic wing design for Micro/Unmanned Aerial Vehicles and drones. It's directly printed onto a 0.1mm thick plastic sheet for a wing membrane. This specific venation pattern is that of a…
This is a component set for the VXE VGN Dragonfly R1 ( NOT SE, Pro, Pro Max). The main purpose is to provide tools for making 3D printed mice using these internals. I've provided the STEP and F3D. The Fusion file is reasonably-well…
Icarus 2 has been released which is the current version and it has a number of improvements: View Icarus 2 here Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this…
Rotadraw is a retro drawing toy, where the children as young as 4 years old can participate. Attach a disc to a piece of paper using the push pin. Mark the dot on the paper next to the Start sign. Locate the hole on the disk near the…
The legs are rather delicate so they're in proportion with the dragonfly. I printed mine at 10mm/s for the 1st layer to really get it nailed down, then 60mm/s is fine for the rest of the layers. I used “initial layer line width” of 100%…
Depending on your filament, settings, and plate type you will get a very different transparent effect. The wings are ambidextrous - either set can go on either side - so you may find you prefer one or the other in order to have the right…
I needed to space out the Phaetus BMS hotend a bit on the Ender 3, so the silicon sock would be able to fit onto heatblock while still clearing the bottom wheel mount on the X gantry carriage. This part slips over the hotend standoff…
id : sa40011a7 name : dragonfly lamp size : 190 x 155 x 275 mm files : 7 pieces : 7 maximum size of the component : 273 x 85 x 27 mm total print time : 11h:24m raft : yes support : no Applicable Bulb type : tBulb S Instructions :…
Icarus 2 has been released which is the current version and it has a number of improvements: View Icarus 2 here Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this…
This is just a simple circular keychain with a cutout of a dragonfly for those who like dragonflies.
I designed this model for my printer. I tested a lot of versions and deleted all weakness. My final version is ready to go just paint correctly supports. After print, put inserts and then assembly whole thing. You will need: some M3…
These files will help when converting from the standard E3D Hotend to the Zodiac Phaetus BMO Dragonfly hot end on a Prusa MK3S+. Note this is not for a regular Phaetus BMO Dragonfly due to the addition of an anti-rotation feature near the…
UPDATED 26-JAN-2024 The only change was to scale the STL file from CM to MM.
It is remixed from Github Klicky-Probe/Printers/Voron/v0/v0_STL at main · jlas1/Klicky-Probe repository and credits goes to them. Any additional guide for installation please refer to the github.
Dragonfly BMO hotend without collar adapter. The original model didn't have a separate version that didn't have the collar and I couldn't find a model for it, so I modified the step file from Phaetus' website . Included step file and stl.
Dragonfly with loop to be used as a charm (necklace, bracelet or earrings) or a keychain
I cut the dragonfly body in two parts. Now I printed the wing roots in clear PETG like the wings, and the body in 3 colored PLA. I geot the looks of the PLA and the funktion of the PETG for the wings. printed with 0,15 mm layer and 0,4 mm…
Print both parts. Print in PLA or PETG. PETG is the better option. If you print in PLA use high printing temperature for better layer adhesion. Lower part needs supports. You can also paint the parts for better UV protection.
Print two pairs, one mirrored along X. You can mirror right in the slicer.
DragonFly - split the wings from the body so they can be printed separately.
Remix of satsana to fit dragonfly bms hotend with 5015 cooling fan Fitted for ender 3 pro only as thats what i have….will fit any printer that uses the same x carriage as ender 3 pro probe offsets are: x-53 y-15
Icarus 2 has been released which is the current version and it has a number of improvements: View Icarus 2 here Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this…
If you want to install the Phaetus Dragonfly hotend, you need a bit different fan duct. For that reason, I have created this one Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Doesn't Matter Resolution:…
I wanted to replace the hotend on my Prusa Mini+, but only had a Dragonfly BMO handy. I can not take credit for creating this remix, as i had Jakub ( https://www.fiverr.com/jakub_junek ) create it for me! and he did a great job.
Icarus 2 has been released which is the current version and it has a number of improvements: View Icarus 2 here Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this…
A printing head for Ender 3/Ender 3 V2 with very good cooling performance. Printing accessories: Dragonfly BMS hotend Orbiter V2 Extruder 5015 24V X2 (part cooling) 4010 12V (hotend) Hardware: M4x20 @4 (5015 fan mounting) M4x10@2 (blower…
Dragonfly with elongated polygonal body and sharp faceted wings.
Wall art: Dragonfly (three colours)
Liked the look of dadul96'sduct but wanted to run dual fans so cut it in half and mirrored it, also plugged some unused holes, changed the shape to fit around a dragonfly and changed the hole sizes to suit m3 screws too. Works well…
Have fun with this low poly dragonfly! Check out my profile for more low poly animals.
Took the original Prusa i3mk3s+ part cooling fan mount and made a better one for Phaetus Dragonfly hotend, now the air will not blow on the silicone sock, but will actually cool the part. It's just a little bit higher.
This is an adaptor that lets you use a Pheatus Dragonfly BMS all metal hotend with your Creality Cr-6 printer while keeping the ABL sensor function This is still a work in progress, there are a few things to improve on but I haven't had…
Mod of KTX992's MakerWorld model using 1.75mm filament stems; length tunes flexibility for different uses.
This is my first blower design for the Ender 3V2. This design is using the Dragonfly BMS hot end, orbiter V2 extruder, and 2x 4010 or 4020 fans on the sides and one 3010 fan on the front. There are now many variations of this, so please…
A remix of the excellent Satsana fan duct that has been widened a little to allow a Phaetus Dragonfly BMS to fit. There is already Dragonfly version(s) of the Satsana, but they use a 5015 blower, and I wanted to use the much, much quieter…
!!! PLEASE NOTE - THIS MOD IS ONLY FOR THE 7-FIN, HEAT INSERT MODEL !!! Great mod by @themacboy - appreciated and thx for sharing, and ofc not possible without the whole EVA thing going on before that. After the initial install (of std…
This mount requires 2 heatset inserts. A huge bonus with using the Dragonfly BMS is you can use 2 M3 SHCS instead of the tiny M2 or M2.5 required by the Dragonfly BMO. I find the BMS side mount with 2 screws is superior to the BMO top…
designed for heatset inserts, nozzle should be pretty much in stock location.' Update: If you have issues with prints after using this bracket for a while, check the tightness on the screws used to mount the hotend to this bracket, and…
cup/bottle holder for the bugaboo dragonfly stroller. would probably work with any stroller with that round knob on it
If you want to support my work, buy me a coffee RatRig V-Minion reverse Bowden w/PC04-M8 by dragonfly BMO 2 cap head M6x12 2 T-Nut - Drop In for 3030 - M6 1 Bowden adaptor by Phaetus dragonfly BMO
No re-wiring required. Ender 7 replacement toolhead with, bowden, or direct drive extruder and Pheatus Dragonfly HIC hotend. Giving a clear view of the nozzle from above, perfect for watching the first print layer going down. Cooling of…
no support needed.
Single shot tray for the Seneca Dragonfly MK2 .22 cal. No magnet, just friction fit. Should fit the Diana Stormrider since they take the same mags, but I don't have one personally to confirm.
!!!Warning!!!This model is still in progress!!! A shroud witch works very welll with hotend Phaetus Dragonfly BMS, 5015 fan on Ender 3 V2 Neo with have magnetic mount round and cubic. Print Settings Printer brand: Creality Printer:…
wings remix by https://www.thingiverse.com/thing:3369138 Category: Creatures
