Wyniki wyszukiwania: drin

Sortowanie

1649 modeli

P
PrintablesFrancis

SUP Drink Holder, Paddle Board

UPDATE: 7/22/2025 YETI Colster/Koozie model added in the files section for standard diameter cans. If you use PCTG filament only 2 perimeters and 15% infill are necessary, no box modifier. Enjoy! UPDATE: 7/19/2024 Skinny can model added…

Wydruk około 3,75 €–4,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
4459
Polubienia
364
Ocena
5
P
PrintablesFreezingPixels

Freezing Pixels - Infill Drink Coasters - Set of 12

A set of 12 coasters with a storage container, all based on the different infill patterns that are available in Prusa slicer. The coasters are printed in two different colors with a color swap on layer 3. Print instructions The set is…

Wydruk około 3,27 €–3,99 € nettoWstępna wycena jednego wariantu

Pobrania
1972
Polubienia
555
Ocena
4,9
P
PrintablesGCV3D

Tetrahedrinsanity Bowl

Overview Introducing the Tetrahedrinsanity Bowl! This patterned bowl features dozens of tetrahedron facets which look really cool when printed in rainbow or silk filaments. Printing I printed using MatterHackers silky rainbow PLA on the…

Wydruk około 10,68 €–13,06 € nettoWstępna wycena jednego wariantu

Pobrania
1300
Polubienia
198
Ocena
5
P
PrintablesTyson Nielsen

Couch Armrest Drink Holder / Phone Stand / Remote Holder: For Cloud Couch / Lovesac / Large Sectional

TWO SIZES NOW INCLUDED. Drink holder + phone stand + remote holder for any large/wide sectional or couch armrest or back of the couch. The non-remote side is easily narrow enough to go between your sofa and the wall). I know that it fits…

Wydruk około 16,29 €–19,91 € nettoWstępna wycena jednego wariantu

Pobrania
454
Polubienia
124
Ocena
5
P
Printablesmweisshaupt

Drink holder camping chair Quechua Decathlon fully 3D printable

Print all 3 files with 100% infill and in a material that is suitable for outdoor use. E.g. PETG.

Wydruk około 0,82 €–1,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
359
Polubienia
129
Ocena
0
P
PrintablesMinietec

Bottle cap for Kavodrink Tritan / Deckel für Kavodrink Tritan Flasche

The bottle cap fits on ‘Kavodrink Tritan’ bottles. There are two versions: one without knurling and one with knurling. If you want to be extra safe that your print is food-safe: How to make food-grade 3D printed models - Prusa Printers

Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu

Pobrania
306
Polubienia
19
Ocena
5
P
PrintablesAlejandro

Beersaving Freezer. Cool your drinks in the water.

This float allows you to submerge the cans and then be able to take them out very fresh. The flexible tabs allow you to hold the cans well. Remember to tie the float well with a rope! For standard 330ml can measurements. 350ml or 500ml.…

Wydruk około 2,43 €–2,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
268
Polubienia
97
Ocena
0
P
PrintablesStoneman

Drink Carrier (door dash, grub hub)

Made simple drink carrier for gig drivers of DD And GH. 1st try leave comments if needs to be bigger or whatever. Category: Kitchen & Dining

Wydruk około 20,94 €–25,59 € nettoWstępna wycena jednego wariantu

Pobrania
252
Polubienia
24
Ocena
3

Fuzzy Acoustic Panel Drink Coasters

Cute coaster versions of acoustic sound-dampening panels. 50% version of the sound dampening panels.

Wydruk około 2,57 €–3,14 € nettoWstępna wycena jednego wariantu

Pobrania
234
Polubienia
69
Ocena
5
P
PrintablesSMACKMAX_

Stylish Drink Coasters

drink coasters, printed in PLA satin Gold Printed on Ender 6 Base file size is 150 mm, i print them at 75% scale (112,5 mm) but also made some at 50% scale (75 mm). Depends on the size of your drinks :). hope you enjoy :)

Wydruk około 3,33 €–4,07 € nettoWstępna wycena jednego wariantu

Pobrania
190
Polubienia
67
Ocena
0
P
PrintablesNGTHRE

Wandring Fenster Ring Osterhasen zum hinhängen

Ich habe hier einen schönen Wand Ring bzw. Fenster Ring mit zwei Osterhasen Konstruiert. Das Modell wurde in PLA gedruckt. Falls der Ring in ein Fenster gehängt werden sollte, würde ich ihn evtl. in PETG wenn nicht sogar in ABS/ASA…

Wydruk około 1,47 €–1,80 € nettoWstępna wycena jednego wariantu

Pobrania
167
Polubienia
13
Ocena
0
P
Printables3DPS

Camp chair drink holder (foldable)

My camp chair has hard arm rests and didn't come with a drink holder. So I've created one that folds up when not in use. Camp chair is a Boab brand. Prints in place and depending on your printer tolerance and accuracy, you may require…

Wydruk około 10,19 €–12,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
151
Polubienia
32
Ocena
0
P
PrintablesMatt S

Washington Capitals Drink Coaster with Ice Rink Holder MMU

The Wifey loves some large format coasters, so these Washington Capitals inspired ones are 100mm by default. I'm sure you can scale it if you wish. I took out the word "Washington" in the logo since my MMU was having issues drawing it…

Wydruk około 7,25 €–8,86 € nettoWstępna wycena jednego wariantu

Pobrania
129
Polubienia
33
Ocena
5
P
PrintablesMaHoGa

Ford Smax mk2 (2015-2019) - energydrink can inlay for cup holder

Die schmalen energy drink Dosen neigen bei unserem Ford Smax leider immer zum umkippen, da die recht groß dimensionierten Getränkehalter für kleiner Dosen nicht wirklich geeignet sind. Also habe ich Maß genommen und eine Art Reduzierhülse…

Wydruk około 2,03 €–2,48 € nettoWstępna wycena jednego wariantu

Pobrania
96
Polubienia
10
Ocena
5
P
PrintablesHarms3D

LED Diffusor Coaster for Coacktail / Drink / Bottle

A drink/bottle coaster diffusor with simple LED lighting. The goal was to construct a small housing for a LED sticker without support. I hope you like it. It consists of a lid and bottom that are held together with a bayonet catch. The…

Wydruk około 1,72 €–2,10 € nettoWstępna wycena jednego wariantu

Pobrania
90
Polubienia
42
Ocena
5
P
PrintablesKongolasse

Wall mount for IKEA Badring water sensor, with the option of attaching a cord to extend the sensor.

Wall mount for Ikea's Badring. This water sensor should actually lie on the floor, with the sensors in the floor to detect water. Now with this wall bracket you can connect other switches without having to do anything special to the unit…

Wydruk około 1,08 €–1,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
80
Polubienia
5
Ocena
5
P
Printableslogi788

Drink bottle holder for a bed / crib for example a PAIDI bed

I designed a drink bottle holder for my kids so that the bottle is always close by. The holder is simply attached to the bet and Suitable for boards up to 23mm thick. The board should not be too thin, as the grip will not be optimal. To…

Wydruk około 6,54 €–7,99 € nettoWstępna wycena jednego wariantu

Pobrania
77
Polubienia
13
Ocena
0
P
PrintablesFalling Entropy

I Read Books, I Drink Coffee, and I Know Things!

Provided file already has settings for 7 different PLA color changes on a grayscale from black to white. The colors used here were in order: Matterhackers Black PolyTerra Charcoal Black Overture Cement Gray Sunlu Gray Overture Light Gray…

Wydruk około 7,11 €–8,70 € nettoWstępna wycena jednego wariantu

Pobrania
77
Polubienia
33
Ocena
0
P
Printablesmweisshaupt

Summer Breeze drinking horn holder

I wanted a nicer way to display the plastic drinking horns from Summer Breeze festival.

Wydruk około 1,44 €–1,76 € nettoWstępna wycena jednego wariantu

Pobrania
76
Polubienia
10
Ocena
0
P
Printables3DHippo

Storage Container for Powder based drinks

Inside the container are ridges to see how many powder you used. You can use my cap, or you just can use every standard PET bottle cap. If you love this design and want to see more fun projects like it, consider joining my club on…

Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu

Pobrania
72
Polubienia
17
Ocena
5
P
PrintablesAnthem212

Beerholder - Drinkholder Foldable Wallmount / Bierhalter - Faltbar, Wandhalterung

A amazing Beerholder to screw in the wall. If you need a beerholder - fold it down ant put your drink in. When you finished push it back up. I have it in my livingroom because we often have visitros to watch a movie together. No where to…

Wydruk około 7,76 €–9,49 € nettoWstępna wycena jednego wariantu

Pobrania
71
Polubienia
6
Ocena
0
P
PrintablesPeter Farell

Bonk Radiation Power Drink : Blutonium : Can Koozie : Team Fortress

Bonk Radiation Power Drink : Blutonium : Can Koozie : Team Fortress

Wydruk około 8,85 €–10,81 € nettoWstępna wycena jednego wariantu

Pobrania
62
Polubienia
19
Ocena
0
P
PrintablesHWA

Grasping at Can SUP Drink Holder Remix

Printed In PETG @ .2. Have included files for one color and also for MMU.

Wydruk około 13,39 €–16,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
57
Polubienia
18
Ocena
0
P
PrintablesPeter Farell

Weathered Drinking Horn Vase

Weathered Drinking Horn Vase. Can't believe how much time I spent on this… The details just never came through. Learned how to use some blender sculpt tools correctly… at least I got that out of it. Sometimes you have high hopes for…

Wydruk około 12,40 €–15,16 € nettoWstępna wycena jednego wariantu

Pobrania
57
Polubienia
20
Ocena
0
P
PrintablesFalling Entropy

Eye of Sauron - drink coaster

Use the 3 color layer changes as specified in the .3mf file. Add an optional peel-n-stick cork backing.

Wydruk około 0,93 €–1,14 € nettoWstępna wycena jednego wariantu

Pobrania
48
Polubienia
7
Ocena
0
P
PrintablesAinon3Dtisk

Keg for pouring drinks into 4 glasses, aneb kdyz jste 4 ale mate jen jedno pivo

Hello, Today I have for you a Keg for pouring drinks into 4 glasses . It is the highlight of every party! Automatically divides drinks into 4 glasses. Absolutely amazing! Interesting appearance. For proper functionality, you need to use a…

Wydruk około 2,53 €–3,09 € nettoWstępna wycena jednego wariantu

Pobrania
47
Polubienia
14
Ocena
0
P

Octavia 1 první gen. držák na pití plechovky / Octavia 1 first gen. drink can holder

Držák Plechovek který pasuje do otvoru vedle řadicí páky jde tam pěkně na tucho ale sedl. (U mě nejde použít klasicky)

Wydruk około 6,48 €–7,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
46
Polubienia
6
Ocena
0
P
PrintablesTom Li

Stackable Drinking Cup

This is a nice curved stackable drinking cup. I've made it with prusament petg and it survives the dishwasher. I've used the following settings to make it water-tight: Ironing - Important to make the floating bottom water tight! In…

Wydruk około 6,46 €–7,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
43
Polubienia
5
Ocena
0
P
PrintablesFalling Entropy

Celebration Drink Coasters

You can apply cork to the underside of the coaster to help keep it from slipping on the table.

Wydruk około 2,12 €–2,59 € nettoWstępna wycena jednego wariantu

Pobrania
30
Polubienia
10
Ocena
0
P
PrintablesChodeec

Hamster Drink Holder

A practical drink holder designed specifically for hamsters. This model is a stable and secure container for your pet's water supply. It fits bottles with a lid diameter of 31 mm , making it ideal for standard small animal water bottles.…

Wydruk około 1,73 €–2,11 € nettoWstępna wycena jednego wariantu

Pobrania
24
Polubienia
5
Ocena
0
P
PrintablesStrayRow

Forza Horizon Drink Coaster

Inspired by Google

Wydruk około 0,93 €–1,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
22
Polubienia
1
Ocena
0
P
PrintablesGizmo Goody

Parametric xTool RAX Rotary Drinkware Adapters (RA3 and RA2 with magnetic chuck jaws)

Motivation xTool rotaries (RA2 and RA3) work well for many objects, but some drinkware can be difficult to mount. Externally, the surface is frequently threaded, tapered, textured, coated, or otherwise less than ideal for consistent…

Wydruk około 0,95 €–1,16 € nettoWstępna wycena jednego wariantu

Pobrania
21
Polubienia
3
Ocena
0
P
PrintablesAsus1357

drink beer ? decision maker

Utilizing mrmila's model with a few changes a couple of versions, depending on your needs ie table, wall, embossed, engraved multi coloured (in file) single extruder Drink responsibly

Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu

Pobrania
18
Polubienia
9
Ocena
0
P
PrintablesPavel M. Blaha

PRUSA RESEARCH drink coaster (MMU3/XL Multi)

Simple drink coaster for your coffee.

Wydruk około 3,31 €–4,05 € nettoWstępna wycena jednego wariantu

Pobrania
11
Polubienia
4
Ocena
0
P
PrintablesMartin_au

The Laptop Saver - A sub-desk level drink holder

Working from home often results in beverages and computer equipment sharing the same desk. This is a perpetually hazardous arrangement (and I speak from experience). This design is for a cup/drink holder that places the beverage below…

Pobrania
33 510
Polubienia
12 970
Ocena
4,83
P
PrintablesTrilobyte3D

Leaf Drink Coasters with Decorative Plant Holder

A set of leaf coasters and decorative holders. These coasters will catch the condensation from your glass and you can use it to water your plants! Nothing quite like free water, right? When you're done with the coaster, plug it back into…

Pobrania
19 624
Polubienia
8638
Ocena
4,88

Drink dispenser (different models)

Drink organizer. New model 2024 https://www.printables.com/es/model/781648-2024-stackable-rotary-drink-dispenser New model 2023 https://www.printables.com/es/model/377642-2023-stackable-rotary-drink-dispenser And modular model :…

Pobrania
10 350
Polubienia
6381
Ocena
4,66
P
PrintablesEnigma

Drink can dispenser

Inspired by similar-looking can dispensers, but built from scratch to actually fit cans I use and hold more cans (accommodates around 11-12 standard-size cans). The parts are split to allow printing on a Prusa Mini, with joints hidden as…

Pobrania
10 164
Polubienia
4939
Ocena
4,74
P
PrintablesBeo666

Monster Energy Dosendeckel 330ml / 500ml Drink

Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke Monster Energy , dem Logo, den Schriftzügen,…

Pobrania
6928
Polubienia
1150
Ocena
4,79
P
PrintablesNolan3D

Ghost Drinking Coffee Keychain

Add a sip of humor to your keys with the "Ghost Drinking Coffee Keychain" – a whimsical, easy-to-print accessory that proves even ghosts need their morning coffee. It's a humorous and adorable nod to coffee lovers and ghost enthusiasts…

Pobrania
5951
Polubienia
1595
Ocena
4,91
P
PrintablesNoodlemeister

LEGO Cup Drink Holder (double-wall insulated)

Life-size double-wall insulated LEGO cup! fits standard cans and keeps them cool! Uses a small wedge to keep the cans from falling out of the cup, and a small venthole in the bottom. Make sure to drop a follow and a like if you want to…

Pobrania
5616
Polubienia
1456
Ocena
4,82
P
PrintablesBamBam Design

Bottle Cap/Marker V2 - Protect your Drink

Bottle Marker/Cap for Drinks & Beer Youtube Short Information about model maintenance: Due to the considerable administrative effort involved in managing models across different platforms, I have decided to maintain only the original…

Pobrania
5045
Polubienia
1629
Ocena
4,9
P
PrintablesMoshiBin

Table Clamp Drink Bottle Holder

Drink holder that clamps to tables. The holder has a large diameter to accommodate a large range of cups and bottles. After printing, simply slide the cup holder into the table clamp from the side. There are two parts at the back of the…

Pobrania
3495
Polubienia
721
Ocena
4,87
P
PrintablesNolan3D

Cat Drinking Coffee Keychain

Enjoy a sip of humor with the “Cat Drinking Coffee Keychain” – a cute, easy-to-print accessory that features an adorable cat drinking coffee from a mug. It’s a perfect gift for anyone who loves cats, coffee, or both, capturing the fun and…

Pobrania
3388
Polubienia
942
Ocena
4,98
P
PrintablesSheepMe!

Voronoi Drinking Glas Coaster

Model Drinking glas coasters with holder in Voronoi Pattern. The holder can hold up to 15 coasters. Dimensions The coaster has a diameter of 99 mm and a height of 5 mm. The storage container has a diameter of 110 mm and a height of 80 mm.…

Pobrania
3233
Polubienia
885
Ocena
4,89
P
PrintablesNolan3D

Dog Drinking Coffee Keychain

Start your day with the “Dog Drinking Coffee Keychain” – a charming and fun accessory that features a cute dog enjoying a mug of coffee. It’s a perfect companion for those who love dogs and coffee, capturing the cozy and relaxing vibe of…

Pobrania
2921
Polubienia
690
Ocena
4,88
P
PrintablesEyeZack

Clamping Camping Gimbaled Drink Holder

NOTE: Don't use Cura Slicer for the Dino Clip, it calculates voids in the print and will cause failures. (Hat tip to Ian B. for figuring this out the hard way!) The start of this description is that I'm a confessed “Dino-Clipper”, I have…

Pobrania
2810
Polubienia
1335
Ocena
5

2023 Stackable rotary drink dispenser

2023 Stackable rotary drink dispenser, improved from model 2022. which takes the same geometry, but improving aspects, gained 6 mm in height to fit better in your fridge, increased 2 mm in width to reinforce the height floors.…

Pobrania
2781
Polubienia
872
Ocena
4,79
P
PrintablesParadogo

Gyroscopic Can Holder – The Ultimate Drink & Drive Accessory

Tired of your drink tipping over while you're zooming down the sidewalk, weaving through traffic, or just trying to enjoy a cold one on your ride? Meet the Gyroscopic Can Holder. Designed for 22mm handlebars (bikes, scooters, strollers,…

Pobrania
2379
Polubienia
1161
Ocena
4,6
P
PrintablesDefozo

Lid for metal cans (Monster Energy Drink logo & no logo)

Lid for your metal cans, keeps it fresh and pests can't get in to your drink. Works with 0,25 - 0,5L cans. Print it 0.2 layer height, 2-3 walls and ~40 infill. No supports required. Tried PLA and PETG - Both works like a charm. Original…

Pobrania
2226
Polubienia
198
Ocena
4,94
P
PrintablesBeo666

Monster Energy Dosendeckel 330ml / 500ml Drink 2.3

Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke Monster Energy , dem Logo, den Schriftzügen,…

Pobrania
2098
Polubienia
488
Ocena
5
P
PrintablesDakotaWLacy

Halloween Disney Villain Potions: Kuzco's Poison, Mortality Potion, and Drink Me Potion

DISCLAIMER: I designed the potions for a friend and they wanted a poison apple along side them. I did not design the apple in the pictures I took but if you wish to get the full set you can support creator JAVIBU13 at…

Pobrania
1903
Polubienia
1591
Ocena
5

2024 Stackable rotary drink dispenser

2024 - New geometry of the beverage dispenser, modified shape of the upper can inlet, beams and more stylized shape. Compatible with previous model 2023. https://www.printables.com/es/model/377642-2023-stackable-rotary-drink-dispenser…

Pobrania
1883
Polubienia
273
Ocena
5
P
PrintablesBlue0724

Monster Energy Drink can holder mug

Remix of "The OG Kyle Cup - 16oz Energy Drink Can Can Holder!" by @MandicReally_151069 with the logo on both sides.

Pobrania
1844
Polubienia
148
Ocena
5
P
PrintablesIn3DSpace

JWST Drink Coaster

Drink coasters inspired by the James Webb Space Telescope primary mirror. Fits drinks up to 3.5" diameter. Available in four surface patterns: Triangles Circles* Linear Matte Gcode and 3MF files include color change and infill patterns…

Pobrania
1595
Polubienia
839
Ocena
4,98
P
PrintablesJohination

INTEX Pool / Drink Wine Holder / Getränkehalter Pool

Der Nutzer “Denis Ru” hat einen weiteren hacken designt für Frame Pools von Intex. Print Settings Printer: DIY Ender 3 & Anycubic Chiron Rafts: No Supports: No Resolution: 0.20 Infill PLA: 15% Infill PETG: 100% Filament: hook - PETG drink…

Pobrania
1575
Polubienia
354
Ocena
4,5
P
PrintablesMandicReally

The OG Kyle Cup - 16oz Energy Drink Can Can Holder!

This is a "Stein" sized to accept a standard 16 fl oz Monster Energy can. Included is a blank version and one with a modified Monster Logo cut into it. Neither is intended to hold liquid, simply to be a silly way to hold your Monster can.…

Pobrania
1549
Polubienia
402
Ocena
4,9

Robert Planters - Drinking Collection

If you like my work, please consider joining my patreon! This is ideal if you want to sell your prints. patreon.com/JBNeto This is my own take of the famous Robert Planters. There is a whole collection done in the same size so it's all…

Pobrania
1458
Polubienia
221
Ocena
5
P
PrintablesRegis

Adjustable drink can dispenser

Thanks to Enigma you for her work and sharing. Following a request from Everspace I just added adjustable parts for these typical American-style cans : - 120 mm Energy Drink Can - 86 mm Regular Soda - 68 mm "Mini" Soda Thanks to Pulsar…

Pobrania
1389
Polubienia
290
Ocena
4,89

Extendable and modular stackable drink dispenser TOP downloads

Extendable and modular stackable drink dispenser, multiple combinations and configurations in heights, levels, rotations, etc. Model measures The model is designed for the 66 mm diameter x 115 mm long can. You can make other dimensions of…

Pobrania
1388
Polubienia
268
Ocena
4,82
P
PrintablesStasiek

Energy drink dispenser

This energy drink can dispenser is designed to hold up to 10 slim cans (such as Red Bull). The model consists of two parts , which should be glued together after printing for optimal stability. It's a great way to organize your drinks and…

Pobrania
1308
Polubienia
656
Ocena
5
P
PrintablesGuido

Measuring Spoon & Funnel Set for Protein Powder & Sports Drinks.

Measuring Spoon & Funnel Set for Protein Powder & Sports Drinks. Ideal for Milkshakes & Shakes, Perfect for Kitchens & Restaurants. Print the different parts and glue the parts together with the right amount of superglue. The sliding flap…

Pobrania
1226
Polubienia
155
Ocena
4,83
P
PrintablesSteven Erickson

Beachside Drink Holder

Nothing worse than having a relaxing day at the beach (or the snowy slopes!), with a nice cold drink, and not having a good place to set down your cool refreshing beverage! So I designed and printed these Beachside Cup Holders and the…

Pobrania
1213
Polubienia
384
Ocena
5
P
PrintablesBeo666

Monster Energy Dosendeckel 330ml / 500ml Drink v2

ACHTUNG: HIER IST DIE NEUE v2.3 VERSION: LINK Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke…

Pobrania
1177
Polubienia
178
Ocena
4,5
P
PrintablesSpragmatic

Harry Potter Drink Coasters

Here is a set of multi-colored Harry Potter drink coasters with holder. I used these for the coasters - https://www.thingiverse.com/thing:4135988 I designed the holder with pockets in the base to accept (4) ½" x ¼" self-adhesive rubber…

Pobrania
1138
Polubienia
299
Ocena
4,82
P
PrintablesNiH

Glamdring - prop replica 1200mm

Replica of Gandalf's sword Glamdring featured in the LOTR movies. This is a work in progress. As of initial publication some things are still missing or represented in simplified ways. The runes on the chamfered part of the hilt are not…

Pobrania
1136
Polubienia
183
Ocena
5
P
PrintablesNolan3D

Raccoon Drinking Coffee Keychain

Start your day off with the "Raccoon Drinking Coffee Keychain." This delightful keychain features a curious and mischievous raccoon enjoying a cup of coffee, capturing the spirit of those who love both wildlife and their daily caffeine…

Pobrania
1129
Polubienia
211
Ocena
5
P
PrintablesNolan3D

Bunny Drinking Coffee Keychain

Start your morning off right with this delightful “Bunny Drinking Coffee Keychain.” This adorable keychain features a cute bunny happily enjoying a mug of coffee, reminding you to take a moment to savor life's simple pleasures. It's the…

Pobrania
1119
Polubienia
271
Ocena
4,81
P

Dragon Scales Energy Drink Sleeve

Keep your energy drinks cool and "Dragon-y"! My drink sleeves have an awesome feel and they look sweet! I recommend 3 walls and less infill for better insulation and greater strength. This version fits a tall (1pt) Monster Energy, or any…

Pobrania
1117
Polubienia
434
Ocena
5
P
PrintablesSpike Mix

Voronoi Drink Coaster

Size: 10cm diameter x 4mm height To legally sell PRINTED models, you may obtain my permission through this link: https://www.patreon.com/SpikeMix3D

Pobrania
1023
Polubienia
275
Ocena
5
P
PrintablesErnesi

Viking Drinking Horn (Remix)

Remix of https://www.thingiverse.com/thing:5171468 size approx 33cm x 19cm if printed at 100% it holds 0.5 liters print without supports

Pobrania
973
Polubienia
300
Ocena
4,8
P
Printablesfrez_knee

Nintendo Switch Joy Con Drink Holder (Remix)

After using the original to hold drinks, I noticed that the joy cons had a tendency to slide out of the rails due to the weight of the beverage. So instead of trying to modify the original STL, I figured it would be easier to just model…

Pobrania
968
Polubienia
178
Ocena
4,93
P
PrintablesPetos Safarik

Bees water platform to drink with bottle reservoir

I failed to find useable water station for bees, therefore I created this one. It's 130x130mm, with 114 hex-shaped platforms for insect to drink from. It's compatible with any PET bottle with standard top. I tested up to 0.7l big one and…

Pobrania
957
Polubienia
391
Ocena
5
P
Printablesmoose

Nametags for drinking glasses

I made nametags for the guests of my wedding that we could hang into the drinking glasses. I used the lovely hanger made by “syca lol” and added individual names using the font “daily” by https://scratchones.com . Give this site a visit,…

Pobrania
953
Polubienia
160
Ocena
5
P
PrintablesOlgu Umuroğlu

Glass / Cup with Straw (Pipette) for Kids and/or Coffee and/or any other Drink Lovers

The design idea started with the need for a glass with a straw that my son would like. Then I wanted to increase the varieties that children would like. While I was designing varieties, I felt like I needed an iced coffee so I designed…

Pobrania
924
Polubienia
101
Ocena
5
P
Printablesmfraz74

Peugeot Boxer, Fiat Ducato, Citroen Relay (2006-2023) Drink Cup Holder

Printed in black PETG with 0.2mm layer height, 4 walls and 30% infill. I would recommend using PETG as a minimum, for layer height you could go to 0.24. 4 self tapping screws are required per side. Update 10/11/24: Added modified cup…

Pobrania
906
Polubienia
100
Ocena
5
P
Printablesroman_hegglin

Drinking glass

Ordinary drinking glass, found in so many kitchens all over the world. Category: Kitchen & Dining

Pobrania
901
Polubienia
45
Ocena
5
P
PrintablesSpradlinb

Drink Can Dispenser - XL Frame

I wanted a faster way to print the drink can dispenser model by Enigma, especially with my larger XL printer. I merged pieces for one side together and mirrored them for the opposite side. I also split out the three connector pieces so…

Pobrania
892
Polubienia
344
Ocena
5
P
Printablesleonllrmc

Bee water drink platform

This is a platform intended to be placed (floating) on a water container to allow the bees to drink safely without drowning . printed in PLA with gyroid 10% infill. model is now exclusib^ve to makerworld:…

Pobrania
877
Polubienia
109
Ocena
3
P
PrintablesIronman-rocks

Drink Can Dispenser Modified

Thank you Enigma for the very nice design. It printed well and snapped together with ease. I did find that using the original lower lip dispenser design, if you pull a soda can too quick other cans wanted to follow. So I designed a quick…

Pobrania
867
Polubienia
473
Ocena
5
P
PrintablesJoe3D

TMNT Manhole Drink Coaster

Sample is printed with .6 nozzle and tops ironed out.

Pobrania
847
Polubienia
133
Ocena
5
P
PrintablesRetromanIE

Monster Energy Drink Koozie - Vase/Spiral Print - V2

A can Koozie for a 500ml Monster Energy(or same sized cans). A full can should slide in with a slight push and stay in there pretty securely until empty. This is much stronger than my previous version:…

Pobrania
829
Polubienia
123
Ocena
5
P
PrintablesVictoria Mills

Energy Drink Can Holder w/ Bow

Holds your favorite slim cans, but cute!

Pobrania
821
Polubienia
71
Ocena
5
P
PrintablesHumblePrinter

Foldable Drinks Carrier

What is it? It's a drinks (beer) carrier that can hold four standard-size cans and/or bottles and can fold down for easy transport, can lock down with magnets. Great for taking beer to parties, sporting events or drinking it alone in a…

Pobrania
818
Polubienia
545
Ocena
4,8
P
PrintablesJura Švébiš

Bee drinker

Bee drinker

Pobrania
790
Polubienia
379
Ocena
5
P
Printablesk2thestank

16oz 3in1 Can Cooler - The Ultimate Drink Buddy - Private Use

More options and upgrades available soon, free version includes very basic features! Free Version includes: Clean Cooler Grooved with Spout Model Features: Layered STEP files so under the objects tab you can easily color customize without…

Pobrania
719
Polubienia
279
Ocena
5
P
PrintablesBamBam Design

Bottle marker with hinged Cap - Protect your Drink

Bottle/Beer Marker with Cap Perfect Party Gadget! Every Crown Cap Bottle could be marked with the snap fit Bottle Marker! Never ever someone drinks your Beer😎 And you can simple close it with the integrated Cap! Kind of fidget toy…

Pobrania
718
Polubienia
120
Ocena
4,88
P
PrintablesNolan3D

Owl Drinking Coffee Keychain

Embrace the night and day with the “Owl Drinking Coffee Keychain” – a charming, easy-to-print accessory that features an adorable owl savoring a mug of coffee. It’s the perfect blend for those who adore the wisdom of owls and the warmth…

Pobrania
712
Polubienia
209
Ocena
5
P
Printablesromcoromcoromco

Viking drink horn

Viking drink horn

Pobrania
697
Polubienia
134
Ocena
0
P
PrintablesPatrik

Drink can dispensers

I love the can dispenser by @Enigma , but it did not fit my refrigerator. So I created a parametric Fusion 360 model, that could be scaled to different lengths. When using the parametric model, be careful, and change the length in baby,…

Pobrania
681
Polubienia
384
Ocena
5
P
PrintablesAndreas Helmer

Wedding Drink Name Tags Generator - OpenSCAD

UPDATE! - April 2025 I made a little github project page where it will generate the right python script for you and make this super simple. Improved Windows support and Mac support too.…

Pobrania
671
Polubienia
104
Ocena
5
P
Printableskriswillcode

James Webb Space Telescope (JWST) Drink Coaster

This is a simple drink coaster inspired by the mirror of the James Webb Space Telescope. The panels are raised, so condensation can easily drain away. It's not 100% accurate, but an artistic interpretation of the mirror. If you're looking…

Pobrania
655
Polubienia
269
Ocena
5
P
PrintablesWojciech Kapura

Sup board / kayak can drink holder

Hi! This is Sup board drink can holder i created for my friend which you might enjoy as well! Model is inspired by some video i saw online, but i couldn't find one for my requirements so i made one myself. No supports required

Pobrania
649
Polubienia
177
Ocena
5
P
PrintablesRadim Mach

Cat drinker with fish toy

Jedná se o spojení pítka (misky s PET lahví) s hračkou rybiček. Rybička v misce je navzájem propojená s rybkou v PET láhvi. Při pohybu rybky v misce se začne pohybovat rybka v PET lahvi. Postup: Jednotlivé komponenty vytisknout.…

Pobrania
634
Polubienia
208
Ocena
5
P
PrintablesSamuelCui

Drink Can Dispenser - For All Sizes

Drink can dispenser for all sizes that you could find in the market, and can be printed on only one X1/P1 plate. No support is needed.

Pobrania
631
Polubienia
67
Ocena
5
P
Printables___Sam___

Paddle Board Drink holder

Use the bungees from your paddle board to secure your can of beer while you're actually paddling … The original used more material than was necessary and i hate infil So this version strips it back into a more ribbed shape which should…

Pobrania
619
Polubienia
60
Ocena
5
P
Printablessquinn

Intertwining Drink Coaster

An intriguing coaster designed so that two of the same shape can be interlocked together for compact storage, and then used either separately or together under your drinks. An optional coaster storage base is also provided which will hold…

Pobrania
610
Polubienia
317
Ocena
4,25
P
PrintablesMythor

Star Wars Drinks Coasters

Hello there! Simple single-colour Rebel Alliance and Galactic Empire themed drinks coasters, plus a caddy to put them (or any other 90mm or smaller coaster) in for storage. Dual-colour filament swap coasters for the Mandalorians…

Pobrania
593
Polubienia
197
Ocena
5
P

Soda Drink Sleeve for 12oz Can Comfort Grip Hexagon Pattern Koozie

Keep your 12oz can drink refreshingly cold with our Hexagon-themed can koozie sleeve! This stylish accessory is perfect for keeping your favorite beverage icy-cold on a hot day, without compromising on taste or quality. With our…

Pobrania
588
Polubienia
122
Ocena
5
P
PrintablesPeter Farell

Drinking Horn

Drinking Horn

Pobrania
582
Polubienia
202
Ocena
5