198 modeli
Deutsch Mit diesem Modell können sie bequem ihr Handy in Sicht- und Greifbarer Nähe platzieren. Schrauben sie ggf. den Halter noch etwas fest. Für die vollständige Funktion müssen sie die Datei zweimal drucken, damit ihr Handy von oben…
Wydruk około 0,96 €–1,17 € nettoWstępna wycena jednego wariantu
Printing instructions First layer: 0.2mm Other layers: 0.15mm Optional color change at: 0.8mm (layer 5) Detailed explanation of why and how this was designed: https://uwyn.com/tactile-patch-sheets
Wydruk około 1,16 €–1,42 € nettoWstępna wycena jednego wariantu
These small lock fit on the standard tension rods with a square head of 5.3 mm. Maybe I will add other sizes later for the Gretsch USA Custom, Pearl Reference of DW Collectors drums since they have different sizes. Send me a PM if you do…
Hello drummers, Hello hobbyists, Hello everyone else, this is the first Version of a traditional 5a-sized drumstick, which I designed. With this project, I wanted to see how far I could Push 3d- printing and test out if I could actually…
H0 1:87 scale models of oil barrels in 200L, 120L and 60L sizes. Designed to be printed with a 0.4mm nozzle at a layer hight of 0.1mm. It can be printed standing up and doesn't need supports.
Easy to print, just postition the model as shown in the screenshot and use any easy print material like PLA or PETG. To assemble it on the Hi-Hat just use 2x M3 x 20mm and two M3 square nuts. The model is designed for standard drum-sticks…
I have an updated version at the following link https://www.printables.com/model/753753-3d-printed-marching-tenors-with-attachements Small tunable drums using standard drum heads and 10-32 x 1-1/2" screws. This was modeled in Fusion 360.…
Added the Queen name to Roger's bassdrum :D Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 200 Infill: 20% Triangle Filament: SUNLU PLA Black Category: Other
A two-part drumstick holder for vertical 1.5" (38.1 mm) drum rack tubing or any vertical tube between 20 and 45 mm. The inner diameter of the holder cup and ring is 7 cm (2 3/4"), so it can hold 6 to 8 drumsticks ( a smaller version for 4…
A great Wall Art of drums. Do not forget LIKE and to upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) I used Flux.1 AI, Copilot and Hotpot
You should be able to use the existing hardware from your microphone to mount these to these little clips. I have not tested this on other kinds of rims , only on my Ludwig EPIC Funk drum rims. It is likely you will need to remix this to…
This DrumStick-Holder is working for the most drumsticks and HiHats. You can simply grab your stick without loosing time. Sizes: Stick-sizes: Diameter 1.3 - 1.6 cm HiHat sizes: Diameter 1.9-2.5 cm Print: Filament: ~ 3g PLA Printing-time:…
A set of skull-decorated cymbal mount nuts for a drumset (designed for Roland e-drum mounts, but will sure work for others too). The skulls were remixed from a wonderful design by bugman_140 (…
14" Snaredrum in Segments with Snarebed and as-good-as-possible hidden segment-borders... Print with support and as much infill as you can! A more solid snare shell makes a more solid sound… (my opinion). BUT: a infill-pattern can create…
A two-part drumstick holder for vertical 1.5" (38.1 mm) drum rack tubing. The inner diameter of the holder cup and ring is 5 cm (2"), so it can hold 4 drumsticks ( a bigger version for 6–8 drumsticks is available here ). It clamps onto…
I'm not one of the lucky ones that caught a drumstick during a concert, so I did the best next thing and bought me some and wanted something to display them. I printed them with 3 walls in PETG for flexibility.
This is a drumstick. I have designed it for use with my Whamola design. All sides are rounded like a normal drumstick, nothing is flattened for 3D printing. This was achieved through the addition of included supports. Because the supports…
S I Z E S INCHES MM outer diam. x height outer diam. x height BASS DRUM 22 18 558.8 457.2 FLOOR TOM 16 16 406.4 406.4 SNARE DRUM 14 6 355.6 152.4 TOM 13 13 9 330 228.6 TOM 12 12 8 304.8 203.2 Dimensions refer to the most common sizes. In…
3d Drums: 24" Bassdrum - Sci-Fi-Style: Unique features... unique look... great sound - professionally sound checked... 24"=60cm. Printed 3x yet. On Pro-XXL-Printers. ABS, ASA+Carbon. With infill or solid… No support needed… Sounds great……
DISCLAIMER: Don‘t judge this model by its performance as an actual musical instrument. Any fault in musical quality is clearly yours. Remember, practice makes perfect, you can do anything you put your mind to. No need for support, I did…
This drumset mic clamp is smaller than others in order to reduce it's footprint, as I didn't find it necessary to be that big.
6" + 8" Concert-Toms My first REAL usable great sounding drums... Easy to print… Change the colour of your Filament after about 5mm printing hight, so you get a cool-looking ring… The mounting-system needs this special drumlug with a…
Camouflage Concert-Toms 6" 8" 10" - Multicolour Print Great sounding Concert-Toms in 6" 8" and 10" printable at once with my Multicolor Printer - Bambulab X1 + AMS 4 Colors I have been working on this design for several years now… and…
Modular Drumstick Simply print one grip, as many body sections as you want, one shoulder, and one tip and you will have a fully functional drumstick, no supports necessary. Simply flip and print on the flat side. Glue is recommended for…
This is a clamp designed to hold microphones directly from your drum hardware. is perfecly suitable to hold your hihat mic directily from it, your overheads if you want them under the cymbals (very common on live performances) or even…
I have Roland V-Drum TD-07KV, frame post diameter is roughly 38.15 mm. So I didn't know other Roland post sizes. So please measure before printing it. Printed with eSun ABS+ without Support. Between 20% and 40% infill is more than enough…
Roland drums headphone holder
Drumstick experiment. I modeled this after the Vic Firth Freestyle 55a drumstick. Printed flat with supports. Layer height: 0.12mm Perimeters: 12 Cubic infill: 100% Total estimated filament for a pair of sticks was 178.11 g These sticks…
Designed by Charles C 2024 #002 Drumstick Holder to keep drumsticks neatly bundled together when carrying them around. Fits with 7A/5A sized sticks - insert down from the tip of the drumstick along the tapered shoulder until fit is snug.…
Two section drumstick that has a hollow center for reinforcing wire. Sized to match a 5B drumstick. Print using PETG and laying horizontally on the bed for more strength. Also use 3/32" (2.38mm) music wire inserted inside for added…
A great Wall Art of drums. Do not forget LIKE and to upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) I used Flux.1 AI, Copilot and Hotpot
Drumsticks Holder for Roland SPD-20
Screwless clip on Drumstickholder 45° on d=19mm can additionally fixed with rubber bands (Support included), but it is noch necessary if just printed Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: Doesn't Matter…
Just my spin on the fantastic Pearl Philharmonic Snare Drum by Oier Caceres. I made the openings so you can keep matched pairs together and easily accommodate up to 2B. The clear acrylic sticks were ones I got from Disneyland many years…
Because I drop drum sticks a lot, I made this drum stick holder. It holds 24 + 2. I can the freely drop drum sticks as I practice, and pick them up when I'm finished, instead of during a song. Good times. I only printed the 24 + 2 because…
Hi Folks, This is a simple model of phone / tablet holder for Roland E-Drums. Fits my TD07-KV. 1x M4 Screw is needed to fix two parts
Print PLA bed 50 °C nozzle 220 °C
Works well, doesn't leak. This model was printed in PLA+ at 0.1 layer height
A great Wall Art of a drummer. Do not forget LIKE and to upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) I used Flux.1 AI, Copilot and Hotpot
Hello. I am a student from the Czech Republic. My passion is 3d modeling and 3d printing. I will be very excited if you follow me in my work on social media. It will help me a lot as a student. https://www.facebook.com/Vize3Dtisku…
Used with a velcro tape, it makes a perfect drumsticks holder for two pairs on my hihat stand
Hello, Today I have Drumsticks for you, Guitar Hero . The sticks are completely authentic to the sticks for the game Guitar Hero on Wii, PS3 or Xbox. Of course, the sticks can also be used for real drum sets. For proper functionality, you…
We have about 15 rain barrels around the house, most are converted from the standard 55 gallon drums. However, we don't need the bung plugs which are typically installed however we don't want debris or mosquitos to get in, but still need…
Super simple, quick printing ~15m print time for me, 5% gyroid infill - not that there's much infill, 0.3mm layer height, 3 layer perimeters. I printed in PLA. Added the FreeCAD file - I used the Link Branch (realthunder) version.…
Another pretend play kitchen protein to add to the collection- chicken! Flat on the back for ease of printing and playing. Filament colors used in photo- Panchroma Starlight Jupiter PLA and Polyterra Muted White
These are a mini rockband drums, it is a first version and needs a few small changes
A set of small crates and metal drum that are designed to be used in tabletop games with an urban or cyberpunk theme.
Will you still need me.. will you still feed me… when I'm 64
Drumstick holder on Hi-Hat or other d=19mm Tubes with 45° angle. VERY strong / tough! to clamp with either M5 or 5mm Wood / plastic screw Category: Music
The gathering of all my work from over the past few years. Some are completely functional, some have never even been printed. I tried to relay which ones in the file names but i may have missed one or 2. Feel free to ask if you are…
Wall mounted holder for 10 drumsticks. The original make of this is @NoahSmet_592312 I took out the part where there were 2 conjoined cylinders and replaced it with 1 cylinder.
Do you feel tingling in your hands? Can't you stop moving them compulsively? Well, you're in luck, because here I bring you just what you need... drums for your desk, you only need 2 pencils and you can start hitting rhythmically. And the…
This model allows for two drumsticks to be clamped together in transit and storage. Let me know if you would like me to post additional sizes with the same formula. This was printed in Prusament PLA with 5 percent infill on my MK3s+ at…
This model is compatible with the lego system.
This ideas comes from a wooden pencil shaped like a drumstick. The idea is to place the cap over the tip of a wooden pencil and have fun pretending to be a drummer! Print instructions I don't have a working printer at the moment, but will…
i caught this one at a Rammstein concert. so it needed a special stand for it to display it properly.
English Version (print details below) Given that clips are no longer produced and have become horribly expensive for a few grams of plastic, I thought it would be useful to model them. I modeled the two clip types (normal & winged) to…
The stand is made out of two files, one is the stand itself, and a tube that is glued to the bottom of the stand, so it can rest ontop of the structure of the drum. It fits perfectly on my TD1-DMK. I haven't tested on other drums, but it…
SUPPORT MY WORK - DONATE 👉 https://wise.com/pay/me/victormarquesm1
This drumstick holder bolts onto our Alesis Nitro Max drum stand leg. The leg diameter is 35mm. For threads, I installed four M4 x 6 x 6 heatset inserts into the container. Then four M4 screws to secure the clamps. 0.6mm nozzle, 0.3mm…
Drumstick Holder for Alesis Nitro Max Frame (Ø 35mm) Fits two Drumsticks, less than 19mm in Diameter. Prints without supports.
made using the tinker cad drum model that was already there. (thank tinker cad)
Marching Tenor/ Quad drums with working harness and stick
Drums topper for cake 0.2 lh, 15% infill
Simple holder for drumsticks fitting the Roland V-Drums series
This drumstick holder is designed to tidy different types of drumsticks, in this case is used in a school music to help the students when they forget their drumsticks ;) Must be printed in vertical with supports for the lower part!
I thought about this holder, because its very anoying wheter you want to play drums an cant find any of your sticks. There are two ways to use it correctly: Using the bottom stand Mount it on the wall with a screw The version you can see…
This is a model of a little drumset with a drum and some drives. There is a “Playing stick” that lets you play both drums and drives with one hand. Also, this “Playing stick” was taken from the model thumb drum in Printables and modified.…
Drumstick holder for Ikea Milsbo cabinet Remixed from : https://www.thingiverse.com/thing:3703309 and https://www.thingiverse.com/thing:440988 Category: Music
I didn't see any stick holder prints that could hold many sticks for easy access so here goes. Just ziptie it to your kit and cut off the excess tie and your done. Just print it upside down, no supports needed. I made it for small…
If you have a Pearl 900 series cymbal stand and this piece broke for you, I got you covered. I designed this because mine broke back in 2018 and I was on a hurry. 7 years onwards and its still working perfectly ! If you don't want to…
Random Scans for your printers to enjoy! haha Random I know but why not?
I was playing around with thin films and had the idea to make a finger drum, here it is! If you have an idea of possibly trying to tune it, lemme know! If you liked this project, you can now support me by buying me a pizza :)!…
This is a small drum and drumstick set.
A great Wall Art of a drums beat. Do not forget LIKE and to upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) I used Flux.1 AI, Copilot and Hotpot
A pair of lightweight drumsticks with classic tapered shafts and rounded tips for beginner practice, grip training and musical props. They can be scaled for different sizes and used on practice pads, soft surfaces or toy drum kits. Not…
I've designed a simple clamp to move Roland Module to different location to make e-drums even more compact. 2x M4 screw + 2x M4 nut is necessary
This is a remix for Ryo Kosaka's Arduino UNO Trigger to MIDI Converter. I made this model to fit a LCD Keypad Shield using no extra parts for the buttons. [PT] Esse é um remix do módulo de bateria feito em Arduino de Ryo Kosaka. Foi…
Treat your pup to a feast-worthy favorite with this delicious chicken leg snack 🍗🐶 With its rich, golden-brown look and satisfying shape, this treat feels like a true reward — hearty, comforting, and impossible to ignore. It’s the kind of…
3D Model Description – Alesis Drumstick Holder (37 mm Tube) 3D‑printed drumstick holder compatible with Alesis racks, designed to mount securely on a 37 mm tube. This holder can store up to 4 drumsticks, giving you quick and easy access…
This model is a drumstick holder to be used as an attachment to the Honeycomb storage wall . The diameter is 1.7cm and it fit all drumsticks I had available. I have also added a small lip, so it doesn't go in further than required.…
Printed with PLA and a 0.12mm Layer Height. Infill of 15%. No supports needed.
This is a wall-mounted version of the tabletop model I have made before, there are 2 backplates for mounting, one to put the screws through, and one with hidden slots for countersunk screws
A Bell cymbal pad for electronic drums. [PT] Um pad de cúpula para bateria eletrônica. Print Settings Printer Brand: Anycubic Printer: Kossel Rafts: No Supports: No Resolution: 0.4mm Infill: 23% Filament: Material 3D / National PLA / TPU…
If you have a drumstick of your favourite band, this is exactly what you need. Category: Decor
This is a crow shaped drumstick holder that I designed to proudly display a set of drumsticks of my wife's favourite band, the mighty THOSE DAMN CROWS. (#crowfamily). The design prints flat on the bed with no supports needed. There are no…
roland drumsticks holder Need a piece of dubblesided tape tostay on place
Simplest possible headphone hander for e-drums
A wall mounted drumstick holder that I designed. DO NOT resell/sell it by itself DO credit me if you use it Print Settings Rafts: No Supports: No Infill: 10% Filament: Any PLA Any Notes: Printed with a 0.6mm nozzle at 0.24mm layer height.…
This is a stackable drumstick dilspay, for drumsticks up to 18mm. Conical 3mm screws are needed to assemble it. In the picture there is a plate missing between the two top, it is supposed to be printed the lower one 2 times.
The bucket fits in both 2800 lid types (one model requires you to push the bucket into the lid, the other requires you to turn the bucket in the lid to lock it). The bucket works as expected. If you want change something, I put my .F3D…
Ludwig USA Drums light box for the drum lovers out there. This was the older logo that an old drummer asked me to create so I thought I would share. Just add in some LED lights and watch it glow……. Note there are no lights in the model…
The very first upload in our "Unlimited Adventures" line of accessories and playsets for 1/18 scale (3.75") action figures. Included are two versions of an oil drum, great for serving as a backdrop for industrial scenes or (in the case of…
it uses NO SUPPORT at all you will need supper glue to combine the two parts together I would recommend to print them together. but it works fine if you don't
I created a series of small boxes for holding stuff inside my toolcase I use as an event technician. This box contains some small drum equipment: DrumKey Cymbal proctection sleeve with some felt CymbalNuts These boxes fit the inlay of my…
The Overheat Drum Belt Holder is a belt carrier for drum mags like the Overheat drum. It uses a catch and release similar to a magwell to ensure that the drum only comes out when wanted. It works with any talon-sized magazine with a…
Drumstick holder replacement for guitar hero world tour drumkit.
