Wyniki wyszukiwania: ds

Sortowanie

29 265 modeli

Collapsing Broadsword (Print in Place)

This is a collapsing sword designed to be printed as one part. Its only 142mm high when printed but expands to over 860mm in total length! The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best…

Wydruk około 9,43 €–11,53 € nettoWstępna wycena jednego wariantu

Pobrania
8072
Polubienia
1002
Ocena
4,85
P
Printablesprntmkr

Earbuds cleaning tool - Remove earwax easy!

Intro A super-simple 3D-printed cleaning tool designed specifically for earbuds and in-ear headphones . It removes accumulated earwax and debris quickly and safely, helping restore sound quality and hygiene — all with a very short print…

Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu

Pobrania
5968
Polubienia
1293
Ocena
4,78
P
PrintablesSneaks

Adjustable Stand for Smartphones, Ipads, and Tablets :: 100% Printable :: No Hardware

Recently I designed a very rugged Tablet Stand for a Tradeshow booth that used quite a bit of unique hardware. After posting the design on Reddit and getting feedback, I decided to try and duplicate the design without using any hardware…

Wydruk około 10,61 €–12,96 € nettoWstępna wycena jednego wariantu

Pobrania
5180
Polubienia
1034
Ocena
4,94
P
Printablesoriddlero

Ultimate Printer Knob Upgrade - The Best Knob of Both Worlds (Precision/Comfort & Speed)

It seems most printer knobs are either good at precision/comfort, or they are good at speedy rotation, not both. This knob upgrade truly has the “Best of Both Worlds”, precision using an aesthetically pleasing, traditional “knurled knob”…

Wydruk około 0,34 €–0,41 € nettoWstępna wycena jednego wariantu

Pobrania
5042
Polubienia
1492
Ocena
4,89
P
PrintablesAltair3D

Simple Book Ends

These are simple book ends. My wife was need some while organizing her book shelf, so I sketched some up.

Wydruk około 11,73 €–14,34 € nettoWstępna wycena jednego wariantu

Pobrania
3206
Polubienia
347
Ocena
4,93
P
PrintablesNight Raid
18+

Źródło oznaczyło ten model jako treść 18+.

Wydruk około 2,81 €–3,43 € nettoWstępna wycena jednego wariantu

Pobrania
2868
Polubienia
329
Ocena
4
P
PrintablesPrintedGuy

Beautiful and elegant car organizer attached with velcro (for phone, cards, pen)

Here we go again next project for the contest This velcro organizer is specially design to have the most necessary things always at hand. How many times you get in and get out the car? Tired of looking the most necessary things to take…

Wydruk około 8,11 €–9,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
2809
Polubienia
1432
Ocena
4,88
P
PrintablesDoMakePrint

SanDisk Extreme Portable SSD (SDSSDE61) Compact Case

Project A compact case for the SanDisk Extreme Portable SSD (SDSSDE61) that holds the SSD, USB-C cable, and USB-A adapter. Cable and adapter fit comfortably in the case while the SSD has a snug fit and will not slide out accidentally. The…

Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu

Pobrania
2612
Polubienia
492
Ocena
4,85
P
PrintablesCalebTimoteo

Snoopy and Woodstock (Peanuts) - Home Decoration

Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 5% Supports needed Scale it as you like :)

Wydruk około 7,33 €–8,96 € nettoWstępna wycena jednego wariantu

Pobrania
2312
Polubienia
381
Ocena
4
P
PrintablesSaddamCZ

Customizable board game (Carcassonne) tile grids

My remix of a board game tile grid by garyacrowellsr with extended customization and minor bugfixes in the SCAD. Original version here: https://www.thingiverse.com/thing:25158 As is, the STL fits 45 mm Carcasonne tiles but can be easily…

Wydruk około 6,45 €–7,88 € nettoWstępna wycena jednego wariantu

Pobrania
1990
Polubienia
283
Ocena
4,97
P
PrintablesBobMcGlobus

Cable tie - powerstrip holder for Multiboard ("Underware" cable management system by HandsOnKatie)

Click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.)

Wydruk około 1,41 €–1,72 € nettoWstępna wycena jednego wariantu

Pobrania
1699
Polubienia
329
Ocena
4,33
P
PrintablesORDEEP

Logo Harley Davidson

Logo is made with 3 color changes per layer for those who don't have a color system

Wydruk około 3,65 €–4,47 € nettoWstępna wycena jednego wariantu

Pobrania
1630
Polubienia
164
Ocena
5
P
PrintablesPrintaUser

Tiny Toy Blaster V2 (6mm Airsoft Toy Gun) No Glue, No Fasteners: Just Rubber Bands and Prints

Summary Dinky little toy blaster. it shoots about 30 feet, is pretty small and is made out of purely printed plastic and two rubber bands (One for the trigger and one for the magazine). It requires no fasteners, or glue, and just uses…

Wydruk około 3,74 €–4,57 € nettoWstępna wycena jednego wariantu

Pobrania
1519
Polubienia
193
Ocena
4,64
P
PrintablesDrFeelgood

Interlockable Sorting Cups (now with Lids)

[ Update 2: I redesigned the cups to make them stackable. You can find version 2 here . Version 1 will stay online in case anybody wants to keep using them.] [ Update 1: Added a snap lid and cups in two more sizes. See below for details.]…

Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu

Pobrania
1366
Polubienia
374
Ocena
4,93
P
PrintablesGlennovitS 3D

Beautiful Game Box (For Cards or Dice)

Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…

Wydruk około 5,04 €–6,16 € nettoWstępna wycena jednego wariantu

Pobrania
1358
Polubienia
454
Ocena
4,88
P
Printableshandell

Harley Davidson Plaque

made this for a friend, they loved it 9in flat black PLA could probably paint the front surfaces with orange and white to make it pop! If anyone needs the vector file please email me at [email protected] Print instructions I used…

Wydruk około 6,55 €–8,00 € nettoWstępna wycena jednego wariantu

Pobrania
1327
Polubienia
110
Ocena
4,88
P
Printableshandell

Harley Davidson Plaque 2

I made this for a friend, they loved it 9" plaque If anyone needs the vector file please email me at [email protected] I added a hook and raised the white lettering so you can swap filaments in order to achieve a 3 color plaque Print…

Wydruk około 6,09 €–7,44 € nettoWstępna wycena jednego wariantu

Pobrania
1256
Polubienia
124
Ocena
4,91
P
PrintablesFusedForms

Earbuds / Phone Port Cleaner With Grip

A simple and fast print to help clean earbuds and phone charging ports. It features a textured side to help with grip, and the tools on each side are the perfect size for cleaning an earbud or getting dust out of a phone's charging port.…

Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu

Pobrania
1187
Polubienia
155
Ocena
4,45
P
Printablesbaldsealion

Steam Deck + Dock Carrying Case Insert US Plug (two MicroSDs Slot)

Edit 9/25/2023: Per the comments, I have revised the micro SD slot to not be so tight, but snug enough to hold the sd card. Additionally, the slot will now only allow the micro SD card to go into it half-way, making it easier to pull out.…

Wydruk około 5,74 €–7,02 € nettoWstępna wycena jednego wariantu

Pobrania
1186
Polubienia
131
Ocena
4,67
P
PrintablesSheepMe!

Stackable Baskets Organizer System with Lids (Hexagon Edition)

I created the Hexagon Pattern Version of my Stackable Baskets Organizer System with Lids (Circle Edition) at the request of a user. Model Stackable Baskets with lids. Length [mm] Width [mm] Height [mm] Model XL High 204.0 124.5 117.5…

Wydruk około 3,00 €–3,67 € nettoWstępna wycena jednego wariantu

Pobrania
1014
Polubienia
521
Ocena
5
P
PrintablesDavid Kisel

Ashtray Harley Davidson

Ashtray with a logo. Harley Davidson. Colorchange if you want it original.

Wydruk około 2,99 €–3,65 € nettoWstępna wycena jednego wariantu

Pobrania
959
Polubienia
136
Ocena
5
P
PrintablesIan Foulds

Dragon Book Ends

These are bookends made using the MakerBot Longhuo model. I printed in tricolour PLA and black PLA+. I have made models so that you can print it in one piece DragonBookendFront and DragonBookendBack. Or as I did, you can print it in…

Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu

Pobrania
945
Polubienia
285
Ocena
5
P
PrintablesDanielAlex

Star Wars TIE Defender (Canon/Legends Versions)

Replica of the TIE/d Defender from Star Wars. It comes in two versions. The canon version is based on its depiction in Rebels, the other version is based on its (most common) depiction in Legends. The only difference between the canon and…

Wydruk około 1,44 €–1,76 € nettoWstępna wycena jednego wariantu

Pobrania
935
Polubienia
150
Ocena
5
P
PrintablesMiguelB.

sunflower seeds bowl / Bol para pipas, pistachos, etc.

Un nuevo diseño inspirado en: https://www.printables.com/es/model/678105-pistachiopeanut-bowl El diámetro es de 160mm , suficiente si los imprimes al 80%, en las fotos aparecen impresos al 100% y al 80%. Los archivos gcode tienen letras…

Wydruk około 2,29 €–2,79 € nettoWstępna wycena jednego wariantu

Pobrania
909
Polubienia
96
Ocena
5
P
Printablesmsystems

Lids for DeskNano x300

Lids for DeskNano x300. Supports pretty much any cooler. Cutout and Mesh styles. Mesh is a slicer based technique. To create the "Mesh" effect, just set top & bottom layer height to = 0, walls to 2mm, infill to 15%. Then experiment with…

Wydruk około 3,44 €–4,20 € nettoWstępna wycena jednego wariantu

Pobrania
848
Polubienia
17
Ocena
5
P
PrintablesAlain74Martel

Cylinder Maze Model 1 with Christmas themed Lids

Cylinder Mazes by 3DFabXYZ.com With 3 different Christmas themed Lids. Are you looking for an unusual gift idea? Or a unique toy for someone special? Do you like solving puzzles? For a truly multi-functional object, 3DFabXYZ is proud to…

Wydruk około 8,08 €–9,88 € nettoWstępna wycena jednego wariantu

Pobrania
846
Polubienia
98
Ocena
4,75

Altoids Knife, Fork & Toothpick

So this is a remix of https://www.printables.com/model/207534-card-sized-knife-fork-toothpick-kit made by https://www.printables.com/social/242064-ruben-martins/about I love things that fit in Altoids Tins. I made it so it fits in an…

Wydruk około 0,68 €–0,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
827
Polubienia
292
Ocena
5
P
Printables3DJG

Platonic Solids

Platonic solids, a classic. It includes an exhibitor with their names. You can print it in Catalan (Base_40_cat), Spanish (Base_40_es) or English (base_40_en). Combine your favorite colors. New: Also see this new version with a circular…

Wydruk około 0,56 €–0,69 € nettoWstępna wycena jednego wariantu

Pobrania
733
Polubienia
37
Ocena
5
P
PrintablesTaiwanRider

Harley Davidson keychain

easy print and cool keychain , cool if you print with black and orange PLA gcode include printer gonna stop at layer 23 to change filament

Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu

Pobrania
663
Polubienia
77
Ocena
5
P
PrintablesMrViddy

Harley Davidson Poker Chip Display Frame

Harley-Davidson Poker Chip connectable frame. Great for those collectors! chips are magnetic with thin metal in the middle There are pegs and holes on each side of the pieces to hold them together. These pieces connects together into a…

Wydruk około 3,01 €–3,67 € nettoWstępna wycena jednego wariantu

Pobrania
647
Polubienia
122
Ocena
5
P
PrintablesLupi

Wydruk około 4,63 €–5,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
605
Polubienia
103
Ocena
4,33
P
PrintablesDVs3D

Peanuts - Woodstock Freestanding Remix

Remix of Dom's Peanuts-Woodstock model for freestanding print display. Remix printed with Prusa Pineapple Yellow and Matte Black PLA; 0.20mm Layers; nice 15% infill; no supports. X and Y dimensions can be adjusted to fit display needs. A…

Wydruk około 1,54 €–1,88 € nettoWstępna wycena jednego wariantu

Pobrania
489
Polubienia
31
Ocena
4,67
P
PrintablesKen Levasseur

Archimedean Solids

The Archimedean solids are the 13 polyhedra that are convex, have identical vertices, and their faces are regular. They don't include the Platonic solids, which have identical faces. All 13 can be listed in Mathematica with the expression…

Wydruk około 7,55 €–9,23 € nettoWstępna wycena jednego wariantu

Pobrania
487
Polubienia
65
Ocena
5
P
PrintablesORDEEP

Harley Davidson Magnet

Refrigerator magnet. Requires 2 x 20x6x2mm magnet. It has two versions, one with cutouts for magnets and the other without so that it can be modified for other magnet sizes.

Wydruk około 1,40 €–1,71 € nettoWstępna wycena jednego wariantu

Pobrania
486
Polubienia
77
Ocena
4,83

Human skull / lidská lebka

Human skull model created by direct conversion from CT scans. A world famous doctor (and our good friend) actively working in the field of surgery provided us with her skull for study purposes. The model is created by conversion from CT…

Wydruk około 22,74 €–27,79 € nettoWstępna wycena jednego wariantu

Pobrania
458
Polubienia
242
Ocena
0
P
PrintablesTomek

Christmas gift boxes - super fast (vase mode) with slide-in lids

Three gift boxes to chose. Print both pieces in vase (spiral) mode. Use enough bottom layers to form 1mm solid base (i.e. 5 layers for 0.2mm layer height). Use 0.8 - 1.0 mm line width (this is External Perimeter parameter in Prusa Slicer).

Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu

Pobrania
453
Polubienia
213
Ocena
5
P
PrintablesPavel

footprint cookie cutter / vykrajovátko lidské stopy

of course it's a yeti paw, bon appetit samozřejmě že to je stopa yettiho, dobrou chuť

Wydruk około 0,27 €–0,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
451
Polubienia
65
Ocena
5
P
PrintablesSASSy Design

Bismuth Star - Winter and Christmas Ornament - 100 000 Downloads Special

Something special - a small amazing shiny star that has fallen right from the sky. A small thank you to all of our supporters and the people who downloaded our models. We reached lately 100 000 downloads which is just so amazing for us!…

Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu

Pobrania
450
Polubienia
261
Ocena
5
P
PrintablesPeter H

MICRO PAINTERS PYRAMIDS

EDIT TWO YEARS LATER - I know a lot of people actually like these a lot more than I did, but really I have a much better version now - if you are interested you can find them HERE. Because the world is a wonderful place full of diverse…

Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu

Pobrania
448
Polubienia
166
Ocena
5
P
PrintablesmoWerk

Photo Card Holder | Picture Frame | Kpop & Pokemon Collectible Cards

Present and display your collectible photo cards in these elegant picture frames Prints without support due to multi parts click connect design 75° angled to mitigate reflections 56mm x 88mm maximum size of the card Separate inner frame…

Wydruk około 1,25 €–1,53 € nettoWstępna wycena jednego wariantu

Pobrania
438
Polubienia
74
Ocena
5
P
Printablesalternatywny

Cotton Pads & Swabs Holder

It's a variation of simple holder for cotton pads and swabs. Printing Settings Print position: default orientation Material: any Supports: No Layer height: 0.2 mm Infill: 5% Nozzle: 0.4 mm

Wydruk około 5,61 €–6,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
433
Polubienia
35
Ocena
5
P
PrintablesFC2M3D

Heart Pyramids Keychain (Remix)

I printed in PLA Infill: 15% Layer Height: 0.20mm Variable Height: Change height from 2 layer to the end to 0.1mm Supports: No Check other Valentine keychains https://www.printables.com/model/1162970-my-sexy-valentine-keychain…

Wydruk około 0,28 €–0,35 € nettoWstępna wycena jednego wariantu

Pobrania
418
Polubienia
85
Ocena
4,5
P
Printablestobiwankenobi

Gridfinity 2x2 for 21mm Liquid Bottles e.g. Vape Liquids 10ml

A 2x2 Gridfinity Stand to store Bottles with 21mm diameter, e.g. Vape Liquids with 10ml.

Wydruk około 4,16 €–5,08 € nettoWstępna wycena jednego wariantu

Pobrania
410
Polubienia
42
Ocena
5
P
PrintablesMetikumi

Cotton Tips and Pads Container

I found several designs for cotton pads and tips holders, but none had the dimensions and shape I liked. So I created this parametric version for my purpose. The print you see was made using Prusament Galaxy Purple. Use the gcode file for…

Wydruk około 17,56 €–21,47 € nettoWstępna wycena jednego wariantu

Pobrania
397
Polubienia
81
Ocena
4,86
P
Printablesifon

Mini Cotton Pads and QTips holder

I printed it in a Creality Ender 3 V2 0.4 mm nozzle, 0.2 layer hight, 20% infill, 210C and 60C Also used a brim to get a better adhesion. And for the seam alignment I used the option “random”. Took me 6h to print at 60mm/s and turned out…

Wydruk około 4,32 €–5,28 € nettoWstępna wycena jednego wariantu

Pobrania
388
Polubienia
45
Ocena
5
P
PrintablesDom

Peanuts - Woodstock

This is Woodstock ! You can gift it or just make it for personal use. Some other possibilities include mounting it in a frame, or tacking it on the wall. The possibilities are up to you! The included gcode is sliced for the Prusa MK2.5…

Wydruk około 0,39 €–0,47 € nettoWstępna wycena jednego wariantu

Pobrania
341
Polubienia
48
Ocena
5
P
PrintablesColorsinbloom

Platonic Solids

Created this minus the cube to help learn with Fusion 360. My daughter is learning about Platonic solids in school at the moment. She asked if I could print her a set for each classmate. So this is the end result. Feel free to use however…

Wydruk około 2,50 €–3,05 € nettoWstępna wycena jednego wariantu

Pobrania
333
Polubienia
36
Ocena
4,75
P
PrintablesRichard

Thorin Oakendshield´s ring

Let me introduce you to my adaptation of Thorin´s ring from movie Hobbit. The ring is designed in Fusion360. The inner diameter is 20mm so anyone can scale it in slicer to own size of finger. I tried to apply some blue color to the place…

Wydruk około 0,71 €–0,86 € nettoWstępna wycena jednego wariantu

Pobrania
328
Polubienia
62
Ocena
5
P
Printablesrem

DS Lite / GBA SP / Boxy Pixel Unhinged stand for Game Boy and Nintendo DS Lite

Prints happily at 0.3mm layer height (or adaptive if you're using PrusaSlicer) - no supports required.

Wydruk około 0,61 €–0,74 € nettoWstępna wycena jednego wariantu

Pobrania
319
Polubienia
41
Ocena
4,67
P
PrintablesDom

Peanuts - Snoopy & Woodstock

This is Snoopy & Woodstock ! You can gift it or just make it for personal use. Some other possibilities include mounting it in a frame, or tacking it on the wall. The possibilities are up to you! The included gcode is sliced for the Prusa…

Wydruk około 0,69 €–0,84 € nettoWstępna wycena jednego wariantu

Pobrania
316
Polubienia
70
Ocena
5
P
PrintablesSeppo

Eat sleep 3D-print repeat coaster for printing-nerds

This coaster is a perfect choice for every 3D printing nerd. It's easy and fast to print. Feel free to share your own experiences with the community. Design by Jaroslaw Krawczyk found on MyMiniFactory:…

Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu

Pobrania
302
Polubienia
79
Ocena
5
P
PrintablesCD PROJEKT RED

Cyberpunk 2077 — V’s Crash Pads

Damn, kid. Lucky you had these. Maybe stick to four wheels next time; leave the bikes to that partner o’ yours. These crash pads really do the job though, huh? Some of my patients rock just one or two, but four on each arm is the way to…

Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu

Pobrania
300
Polubienia
126
Ocena
5
P
PrintablesPeter Farell

Bill and Teds Phone Booth Time Machine

Bill and Teds Phone Booth Time Machine. Attention!! the gcode is for a .6 nozzle at .3mm layers. If you want to use a .4 nozzle you will have to load the .3mf file into your slicer and slice for that nozzle at .15 or .2 Im not sure if the…

Wydruk około 12,77 €–15,61 € nettoWstępna wycena jednego wariantu

Pobrania
288
Polubienia
72
Ocena
0
P
PrintablesPeter Farell

McDonalds Grimace Shake.

Mcdonalds Grimace Shake.

Wydruk około 8,70 €–10,64 € nettoWstępna wycena jednego wariantu

Pobrania
279
Polubienia
60
Ocena
0
P
Printablesvain1222

Russian Railroads (RZD) Keychain - Брелок ржд

Keychain with the logo of RZD - Russian railroads, best to print face down for better surface result Size on picture, print time with 0.2 layer height and 35 speed - 13 minutes Брелок с логотипом ржд - советую печатать лицом вниз,…

Pobrania
268
Polubienia
17
Ocena
0
P
PrintablesKirk.D

Windshield Washer Fluid Cap

This is a replacement windshield washer fluid cap for a 2010 Land Rover LR2 (I haven't tested others but I expect it may fit other models). While filling up the windshield washer fluid one day, the cap popped off and was lost. No problem,…

Wydruk około 1,58 €–1,93 € nettoWstępna wycena jednego wariantu

Pobrania
263
Polubienia
22
Ocena
4,67
P
PrintablesTeo_211

Harley-Davidson Street Glide Wall Art

Harley-Davidson Street Glide Wall Art Silhouette model. Adjustable size. I accept model suggestions.

Wydruk około 1,23 €–1,51 € nettoWstępna wycena jednego wariantu

Pobrania
262
Polubienia
37
Ocena
5
P

Kubek Harley-Davidson i Hellcat

Kubeczki z logo Harley-Davidson i Dodge Hellcat

Wydruk około 7,96 €–9,73 € nettoWstępna wycena jednego wariantu

Pobrania
256
Polubienia
39
Ocena
0
P

VALVE Index Knuckles and HTC VIVE Tracker 3.0 Charging Stands

These here are some simplistic Charging Bays for my Index Controllers and also my new VIVE 3.0 Trackers. I didn't like how all my VR Gear was just laying in my Drawer so i decided to get it all a bit more Cleaned up ^^ I Recommend using…

Wydruk około 2,77 €–3,38 € nettoWstępna wycena jednego wariantu

Pobrania
246
Polubienia
26
Ocena
5
P
Printablescq

Tin Can Lids for Fridge Storage

Cover up your pineapple slices, soups and baked beans easily with these lid than presses onto an opened tin can to store in the fridge. A simple press on lid for a can of Dole Pineapple Slices(85.5mm diameter), Standard Cans(e.g.…

Wydruk około 0,52 €–0,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
244
Polubienia
96
Ocena
1
P
PrintablesMrViddy

Harley Davidson Route 66 KeyChain

4mm base with 0.8mm lettering sticking out Strong keychain i Put 100% infill for better strength

Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu

Pobrania
243
Polubienia
51
Ocena
5
P
PrintablesSebastian

Motorized Camera Slider with WiFi (DSLR time-lapse)

The aim of this project is to provide an open source, top of the line camera slider for e.g. timelapses, that costs approx. $100. This project is somewhat advanced and requires several non 3d printed parts. This is to provide a slider…

Wydruk około 0,30 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
239
Polubienia
333
Ocena
5
P
PrintablesTim A.

3Dsets Landy Mini Realistic Towbar + Trailer Coupling

This is a more realistic and functional towbar and trailer coupling for the Landy Mini by 3Dsets.com and the different trailers. The towbar is a remix of RearBumperForTowbar.stl by Matthijs2101 . Unfortunately, this design requires…

Wydruk około 0,63 €–0,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
231
Polubienia
33
Ocena
5
P
PrintablesUko

Cotton Pads Holder

Pairs well with the printable Mini Cosmetics Bin . You can also find a lid in the Extra folder if you're afraid that dust will collect on the pads

Wydruk około 0,80 €–0,97 € nettoWstępna wycena jednego wariantu

Pobrania
226
Polubienia
40
Ocena
5
P
PrintablesThird Dimension

Brown bear skull moveable jaw lifesize printable on the Prusa Mini+ 3Dscan

The original model was available thanks to the University of Dundee Museum Collections. Original scan available here with CC0 Public Domain license: https://sketchfab.com/3d-models/brown-bear-skull-e01dc94d20df4b888c7a6979bffb45a9 This…

Wydruk około 7,00 €–8,56 € nettoWstępna wycena jednego wariantu

Pobrania
225
Polubienia
72
Ocena
0
P
PrintablesMakafab

Sanitary pads dispenser

I design this model for my girlfriend She wanted a pads dispenser to make more elegant than just letting the box of pad in the bathroom. The cap snap in the box, i have print both of them in PLA I have pretty big hand but the hole is well…

Wydruk około 3,52 €–4,31 € nettoWstępna wycena jednego wariantu

Pobrania
221
Polubienia
38
Ocena
4,33
P
Printablesasphaltbuffet

Snap-in Lids for Desktop Dumpster

2025-01-31 UPDATE As noted in the comments, this snap-fit increases the risk of breaking a hinge on the dumpster. I recommend pressing in toward the edge of the dumpster so that it doesn't stress the hinge in a direction that is…

Wydruk około 1,05 €–1,28 € nettoWstępna wycena jednego wariantu

Pobrania
216
Polubienia
15
Ocena
4,25
P
PrintablesPeter Farell

Wizards Medallion

Wizards Medallion.

Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu

Pobrania
213
Polubienia
51
Ocena
0
P
PrintablesMartin

Washing pads and cotton pads holder

An addition to my home accessories collection. Holder for cotton swabs and ear buds. Wife loves this design. Printed with PLA white 2 layers 15% infill (I choose Gyroid) I would be happy for feedback. Thanks It's going to print tomorrow,…

Wydruk około 4,74 €–5,79 € nettoWstępna wycena jednego wariantu

Pobrania
211
Polubienia
15
Ocena
5
P
Printableskaje

Lathe Change Gear 7x10 or 7x12 Minilathe - 63 tooth for metric threads

This lathe change gears should fit most 9x10, 9x12, or 9x14 mini-lathes. This change gear makes it possible to cut metric threads on a lathe with an “imperial” (typically 16tpi) lead-screw. For details on using this gear, see this link:…

Wydruk około 1,63 €–1,99 € nettoWstępna wycena jednego wariantu

Pobrania
204
Polubienia
14
Ocena
5
P
Printablesmaxmar

Stands for Braun Razor/Trimmer/Groomer and Accessories (Ablagen für Braun Haarschneider und Zubehör)

Two stands for the Braun MKG5544 electrical razor/trimmer/groomer and its accessories. The accessory stand is for the different heads of the device. The stands might also work for similar models made by Braun. The accessory stand is…

Wydruk około 0,52 €–0,63 € nettoWstępna wycena jednego wariantu

Pobrania
196
Polubienia
27
Ocena
4,5
P
PrintablesNuvz

Two Simple Boxes with Lids - gift box - parts box

2 small boxes one is 79mm x 99mm x 55mm with a detached lid. The other is 50mm x 75mm x 30mm. They are light weight and basic. The box and lid print together. These work great for storage or gifting. Update: I added separate .stl files…

Wydruk około 3,67 €–4,49 € nettoWstępna wycena jednego wariantu

Pobrania
194
Polubienia
19
Ocena
5
P
Printablesravi72munde

Kitchen hook to hold lids

A simple as the hook can get. Use a command strip or fix it using a screw

Wydruk około 0,69 €–0,85 € nettoWstępna wycena jednego wariantu

Pobrania
189
Polubienia
72
Ocena
5

Pringles Cans with Press-on Lids

Didn't see them so I made them. Let me know if you want more sizes.

Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu

Pobrania
189
Polubienia
25
Ocena
5
P
PrintablesSteveW91

Functional Jar Lids

Let me know if you have any ideas for other functional lids I could design to add to the collection. Us Australians love our Vegemite, so this is a way to re-use all those empty Vegemite jars and make some cool functional prints! So far I…

Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu

Pobrania
189
Polubienia
78
Ocena
0
P
PrintablesPeter Farell

Mary Ann Atwoods Rosy Cross Pin

Mary Ann Atwood - The Rosy Cross Pin

Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu

Pobrania
188
Polubienia
41
Ocena
0
P
PrintablesJFKonstruiert

OLD (and G4) L-boxx SDS Plus drill bit holder

I adjusted Jevermeister's drill bit holder for mounting pattern in older style L-Boxx lids. It does fit the new G4 version as well, but not as universal as the original design. Fits 5 SDS Plus dill bits per holder. 2 holders can be…

Wydruk około 1,40 €–1,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
186
Polubienia
36
Ocena
5
P
Printablespjvenda

Prusa MK4/MK4S bin - modified with accessory cover and two clips + new lids

This is an accessory or waste tray for the Prusa MK4/MK4S 3d printer. It is a remix with a few tweaks of my preference: Added a second clip to attach box to printer frame extrusion Added an accessory cover out of another published model…

Wydruk około 4,21 €–5,15 € nettoWstępna wycena jednego wariantu

Pobrania
185
Polubienia
19
Ocena
4,43
P
Printablesspalex

Car sauce holder for KFC and McDonalds

Print it, shove it into your air vent and enjoy.

Wydruk około 0,68 €–0,83 € nettoWstępna wycena jednego wariantu

Pobrania
184
Polubienia
23
Ocena
0
P
PrintablesLevi

223/556 Ammo Box | 25 Rounds

This 223/556 25 round ammo box was designed in Fusion360 and printed on a Prusa Mk3s+ with eSun pla+. This was specifically designed to be a gift for my pap. I have 5 round boxes as well, but haven't posted them yet. 3mf and gcode files…

Wydruk około 12,87 €–15,72 € nettoWstępna wycena jednego wariantu

Pobrania
183
Polubienia
30
Ocena
0
P
Printablesgex

Ananas Pen Cup (Vase Mode) with Lids and Separators

Details I wasn't completely satisfied with my previous design so I fine-tuned that idea. And while I was perfecting those little bumps I started thinking about a solution to make it more rigid. The result is a lid that seamlessly fits…

Wydruk około 0,29 €–0,36 € nettoWstępna wycena jednego wariantu

Pobrania
180
Polubienia
64
Ocena
5
P
PrintablesRostaP

Windshield for YAMAHA XSR 900

One of my first practical models. I printed from PETG and it has worked perfectly for more than two years. Uploaded model of windshield is without picture of the biker. For assembly you need (windshield with the holders) 2x Allen screw M6…

Wydruk około 15,71 €–19,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
179
Polubienia
34
Ocena
2
P
Printablesgeokscott

Motorized Blinds Tilt Servo Control through Home Assistant

I wanted to control the tilt of my 2" venetian blinds through Home Assistant using ESPHome. My first setup was using a 28BYJ-48 stepper motor which worked but is was barely strong enough for the job. I had to use gear reduction to power…

Wydruk około 0,20 €–0,25 € nettoWstępna wycena jednego wariantu

Pobrania
167
Polubienia
24
Ocena
5
P
Printablestjjos

Cuckoo clock hands

The originals broke so I made replacement cuckoo clock hands. The little one is the hour hand while the long one corresponds to the minute hand. Might need light sanding in order to fit properly on the actual clock. I recommend ironing…

Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu

Pobrania
148
Polubienia
9
Ocena
0
P
PrintablesBigb8

SeedSorter: A mesh sieve converter for Prusament spool

I wanted to grow my bee-friendly-area of my little apartment garden, so needed to get the seeds from the plants. I needed to sort seeds from the dry plant residue and saw the empty spool in my workshop. You can use it for whatever, I made…

Wydruk około 6,93 €–8,47 € nettoWstępna wycena jednego wariantu

Pobrania
144
Polubienia
40
Ocena
0
P
Printablesschneems

DustyBoi: Under Table Vacuum adapter for Delta 52-963 Bandsaw

Here's a video in action: https://www.reddit.com/r/functionalprint/comments/myy667/i_used_to_have_a_dusty_bandsaw_now_i_have_dustyboi/ This attachment removes the dust from the bandsaw blade. The vac attachment is sized for a Festool D36…

Wydruk około 7,28 €–8,89 € nettoWstępna wycena jednego wariantu

Pobrania
135
Polubienia
32
Ocena
0
P
PrintablesSaphir

Molding Kit for Cardshuffler-Sealings

This mold is used to make a suitable seal for Lukas Cenovsky's card shuffler from basic materials that are easily available or available in the household. I used hot glue for this, but you can also use silicone, acrylic or similar…

Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu

Pobrania
133
Polubienia
16
Ocena
4,5
P
Printablestermlimit

Woodstock Coaster

I saw a few different Peanuts ideas, but no coasters. Created using https://www.thingiverse.com/thing:2248070 as the base Woodstock. Layer change after 2.4cm All rights to Peanuts. I do this for fun and no support is required. However,…

Wydruk około 1,21 €–1,48 € nettoWstępna wycena jednego wariantu

Pobrania
128
Polubienia
16
Ocena
0
P
PrintablesHB9GXS

Kids Play BBQ Tongs

my kids broke their play bbq tongs, so here are the new ones...

Wydruk około 2,55 €–3,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
120
Polubienia
17
Ocena
0
P
PrintablesSan G Dice

Dice Mold Housing With Built In Keys/Registers For Making Molds

This is a simple 2 piece, easy to use mold housing for dice, but you can use it for anything you want. It has to pieces which you can attach together with clamps or clips, then fill with silicone over the dice. I use Cricut Transfer Tape…

Wydruk około 3,68 €–4,50 € nettoWstępna wycena jednego wariantu

Pobrania
119
Polubienia
5
Ocena
0
P
Printablesdaroz

Motor Controller Mount for SDS MK4 Swerve Drive (FRC)

Primarily for use in FIRST® Robotics Competition robots that use the Swerve Drive Specialities MK4 Swerve Module , this is an integrated motor controller and CAN bus connecter mount. Designed for FRC team 5881, the Tech Valley High School…

Wydruk około 5,23 €–6,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
119
Polubienia
11
Ocena
0
P
PrintablesRob Latour

Encloser for two 8 module Max7219 display boards (joined together)

This 3D printed enclosure (three parts: left, middle, right) holds two 8 module Max7219 display boards. Included are the .stl files and the Fusion 360 (source model) .fd3 file. It also requires a front piece of red acrylic plastic 1/8"…

Wydruk około 8,67 €–10,60 € nettoWstępna wycena jednego wariantu

Pobrania
117
Polubienia
13
Ocena
0
P
PrintablesJonathan Hofman

Modern look Odroid N2+ NAS housing with 2 HDDs

I created a sleek housing for my Odroid N2+ NAS. It was printed with white PETG to give it a modern look and make it more temperature resistant, but I could imagine that with the current cooling (80mm FAN) PLA could be used as well. It…

Wydruk około 22,82 €–27,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
115
Polubienia
20
Ocena
0
P
PrintablesFranziska

Vitamin effervescent tablet modular holder/stand. Very small print. Fits most brands.

My effervescent tablet tubes kept falling over on the shelf, so I just needed something simple to keep them standing up. I remixed an egg holder to fit the purpose, allowing me to add as many holders as I need in various configurations. I…

Wydruk około 0,28 €–0,35 € nettoWstępna wycena jednego wariantu

Pobrania
107
Polubienia
16
Ocena
5
P
PrintablesPeter Farell

Basic Ukulele Chords Chart

Basic Ukulele Chords Chart Color Change at z-height included in gcode.

Wydruk około 6,72 €–8,21 € nettoWstępna wycena jednego wariantu

Pobrania
99
Polubienia
60
Ocena
0
P
PrintablesMatěj Bartoš

Zelmer heads to Kärcher- vacuum cleaner adapter/redukce hlav vysavačů zelmer na vysavače kärcher

This simple model is only my desing it isn´t remixed or download on thingivers or others. (i know i poste it twice, bacuse previous print is printed more than hour)/Tento jednoduchý model je z mé hlavy a není stažen z internetu ani není…

Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu

Pobrania
99
Polubienia
20
Ocena
5
P
PrintablesPlatzhalter

Benq Screenbar adapter for displays deeper 3cm e.g. from Eizo -- Adapter um die Benq Screenbar für Bildschirme tiefer 3cm zu verwenden z.B. von Eizo

I'm a big fan of the Benq Monitor lights as they offer a simple genius light for your desk. Unfortunately I couldn't use it stock on either of my workspaces without modifications. You can now benefit from my struggles ;D This adapter…

Wydruk około 2,06 €–2,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
96
Polubienia
8
Ocena
4
P
PrintablesQualith

Stands for boardgames table lids fun & tables and others

I printed mine with 0.6 nozzle, 3 walls, 10% grid infill with PLA. If you print it with 0.4 nozzle, maybe increase to 5 walls. PETG should be even sturdier.

Wydruk około 12,79 €–15,63 € nettoWstępna wycena jednego wariantu

Pobrania
91
Polubienia
14
Ocena
5
P
Printablesmweisshaupt

Customizable SDS Drillbit Case

This drill bit case is inspired by the hexagonal drill bit set from Hilti. I liked the design but already had a few drill bits so I didn't want to buy a whole new set for the case. So I made a similar design :) This case is quite simple,…

Wydruk około 2,01 €–2,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
90
Polubienia
22
Ocena
0
P
PrintablesPeter Farell

Badassasaurus : Borderlands 2

Badassasaurus : Borderlands 2

Wydruk około 16,73 €–20,45 € nettoWstępna wycena jednego wariantu

Pobrania
83
Polubienia
31
Ocena
0