1865 modeli
V3 Update: Removed the sharp part on one side and added reinforcement to the top and around where the spring seats. Also used the reinforcement to lay the part down. I have not tried this yet, so not sure if a raft or support would be…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
With these holders, you can neatly store your Dyson accessories. Update: Added STL Files
Wydruk około 2,35 €–2,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple yet very designful and unique plant pot inspired by the great Odyssey by Homer. Printing information: 1. Regular print: Use pot files. The models are ready to print with starter prusaslicer settings. The print is divided into two…
Wydruk około 1,46 €–1,78 € nettoWstępna wycena jednego wariantu
The Dyson vacuum cleaner toy is a great thing to keep your child busy while using the big vacuum yourself. But most of the time this thing just keeps lying (and flying) around in our closet which is quite annoying. So I made a wall…
Wydruk około 2,60 €–3,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UPDATE 09/2024 Add new version V8 for G93SC and G93SD with monitor clip. You can clip this version to your monitor without additional tape. Would be nice to get feedback for G95SC. Add new version V5 to fit G95SC. Description This is my…
Wydruk około 2,07 €–2,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wall mounted storage for Dyson accessories. The angled mount allows the storage of tools that do not fit on many vertical mounts. New version v30: Larger screw holes as per popular demand(4.5mm with 8.7mm countersink) Slightly larger…
Wydruk około 4,09 €–4,99 € nettoWstępna wycena jednego wariantu
I wanted the trigger lock switch by Ondrashek for my Dyson Outsize, so I remixed it with crash720's trigger lock model to clip on and fit snuggly around the handle of the Outsize and be able to switch the trigger when required. I found…
Wydruk około 1,10 €–1,34 € nettoWstępna wycena jednego wariantu
An adapter to use Dyson V8 and later accessories with an older Dyson V6 vacuum cleaner. I printed the final part with a 4mm nozzle, 0.10mm DETAIL profile in Prusa Slicer, just because I wanted a nice, clean finish. All the prototypes were…
Wydruk około 4,40 €–5,37 € nettoWstępna wycena jednego wariantu
I created a funnel to suck the air out of the filament zipper bags. It fits on Dyson V10 or newer vacuum cleaner. The release mechanism is a little bit stiff. I think this will be better than a lax fit. Happy printing ;-) Print…
Wydruk około 2,18 €–2,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Assassin's Creed Odyssey inspired coaster for your every day assassin's drinks. Be sure to resize the model to be between 85x85mm to 100x100mm to obtain the proper usable side/range of the standard coasters usually avaliable. You can also…
Wydruk około 0,99 €–1,21 € nettoWstępna wycena jednego wariantu
It is the odyssey for Super Mario odyssey.
Wydruk około 3,70 €–4,53 € nettoWstępna wycena jednego wariantu
I have a couple of small accessories for an old Dyson DC07 in the house, and wanted to start using the short Dyson brush nozzle (pictured) on my Shark cleaner because its bristles are stiffer and more durable - the Shark brush is too soft…
Wydruk około 0,87 €–1,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My Dyson DC07 hose has an arch on it and did not allow me to suck the air out of my vacuum bags. This attachment will snap into your Dyson hose and allow you to get all the air out. Printed with PLA but PETG will work as well.
Wydruk około 1,40 €–1,71 € nettoWstępna wycena jednego wariantu
Print with 0.15 mm layer height in PETG. 15% infill. A raft helps prevent lifting on the hanger print. A small amount of post processing might be necessary to get smooth attachment and detachment. See drawings for dimensions and assembly…
Wydruk około 2,28 €–2,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Added a thread on the end to screw onto a 27.4mm thread, like the one on the diy vacuum bag here: https://www.thingiverse.com/thing:6107866. (it is a really good diy vacuum bag by Johnnywatchbox on Thingiverse). If your vacuum starts…
Wydruk około 1,50 €–1,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
first design printed in prusament PLA with 15% infill used a brim and support for outer notch just to be safe
Wydruk około 4,21 €–5,15 € nettoWstępna wycena jednego wariantu
Original Dyson part number 906960-11 Does it differ from the original? Yes, although it's functionally the same. I haven't added those weird ovals around the outlet. I don't think they add much to structural strength. Underside brush is…
Wydruk około 3,07 €–3,75 € nettoWstępna wycena jednego wariantu
This in an older version of current, improved version: https://www.printables.com/model/329123 …please use that instead. This adapter installs into the main body of a Dyson v7 vacuum and allows you to attach the HEPA final filter. Print…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
I wanted an adapter for Dyson accessories that would fit a dust extractor with a 35 mm hose. There wasn't one, so I remixed an existing model from Printables. I have a Dyson V7 but I believe the connections up to V15 are interchangeable…
Wydruk około 2,13 €–2,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dyson accessory holder for wall mounting. Compatible with Dyson V7-V11. V15 (verified by me) reversible, works with front release mechanism or facing the wall. works with simple and motorized accessories Do not over-tighten the mounting…
Wydruk około 1,94 €–2,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Our kids love their Dyson toy vacuum. So it gets used quite often and from time to time looses its buttons. Most of the time we find them and put them back in, but lastly one got lost, so I made this replacement which fits very nice and…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
The 8-Bit Pipe from the game Super Mario Odyssey that leads to the 8-Bit Classic World. Created with Solid Works 2018.
Wydruk około 8,79 €–10,75 € nettoWstępna wycena jednego wariantu
We lost our windshield wiper fluid cap. I designed and vase-mode printed a new cap that should pop over the top of the fill tube. The fit was pretty tight. I set the extrusion width to .8mm in the vase mode print and had it print 1mm of…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu
A 2001 lithophane using the iconic scene of Dave Bowman walking down the corridor. I have also included a gcode using 0.15 mm layer heights using my settings. Supports shouldn't need to be used if placed on bottom face but if you are…
Wydruk około 2,01 €–2,46 € nettoWstępna wycena jednego wariantu
This holder works well when printed in PLA+ or PETG. There are two screw holes M4 to mount the holder to your wall.
Wydruk około 1,47 €–1,79 € nettoWstępna wycena jednego wariantu
Simple 1 screw mount for Dyson attachments, designed to be mounted on a horizontal surface like under a shelf or on a ceiling. Works with both standard and powered attachments.
Wydruk około 1,36 €–1,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This attachment snaps into a Dyson DC07 Hose. Printed with PLA but PETG works as well.
Wydruk około 1,88 €–2,30 € nettoWstępna wycena jednego wariantu
Dyson DC25 upright vacuum wand cap, part number: 914114-01 modified from original design to fit the larger dc25 including cutout/alignment tab. Print tested at .8 nozzle with .4mm height. (.4 nozzle with .2mm provided as well). I like the…
Wydruk około 0,57 €–0,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Filament : Devil Design. Blue / Green / Orange Transparent. PETG 0.20mm. Infill : 15% Gyroid. Nozzle : 230c. Bed : 90c. Support : None. Vertical Shells : 1. Horizontal Shells : Top / Bottam : 2.
Wydruk około 1,73 €–2,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ein freigeformter Telefonständer. Mehrfach überarbeitet und abgerundet. Groß genug für diverse Smartphonemodelle.
Wydruk około 5,08 €–6,21 € nettoWstępna wycena jednego wariantu
A replacement part for the Dyson DC14 upright vacuum cleaner. This part replaces the wand release catch. Printing: Printed with ribs facing up Build-plate supports for at least 35 degree angles PLA, 0.15 layer height resulted in…
Wydruk około 3,99 €–4,87 € nettoWstępna wycena jednego wariantu
Dyson Outsize Absolute+ Vacuum Seal Bag Attachment I created this using the template from @M3D3. You can use it from most newer Dyson stick vacuums.
Wydruk około 1,69 €–2,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model is an experimental adapter designed to connect a Dyson vacuum to the silicone air-removal tools commonly used for vacuum storage bags for 3D printer filament. The idea: no more manual pumping — just attach your Dyson and let it…
Wydruk około 1,67 €–2,04 € nettoWstępna wycena jednego wariantu
Description I like to spend time with my friends connected online. Mostly when I'm checking the printing. The idea of this remote controlled pourer I had for many years in my head. It's much better feeling when I don't pour the shot by…
Wydruk około 6,16 €–7,53 € nettoWstępna wycena jednego wariantu
Purchased some Jumbo Vac bags on Amazon. Couldn't find an adapter, well I designed and made one. https://a.co/d/9Y6o5Eo I had to figure out what threads it used. Weird 23mm x 2mm pitch. I designed 23mm x 2mm pitch threads. Then designed…
Wydruk około 2,43 €–2,97 € nettoWstępna wycena jednego wariantu
Adapter to use Dyson V7, V8, V10, V11, V12, and V15 accessories on the Samako Cleandetect cordless vacuum cleaner. Makes your life with a Samako Cleandetect vacuum way easier! The flexible hose from Dyson saves me a lot of back and…
Wydruk około 1,69 €–2,06 € nettoWstępna wycena jednego wariantu
Foxy from Five Nights at Freddys.
Basically prints without support and brim, but I'd recommend a 5-10mm brim (as in the .3mf file). 0.6mm nozzle and 0.25mm layer height is fine, although you might reduce it for a higher quality print. Do yourself a favour and use PETG or…
I do not own this character. BlushCrunch Studio are the creators of Gigi, respecting the rights of the creators. There might be a painted model of Gigi someday for the thumbnail. I procrastinate a lot, sorry about that. Also, I'm just…
This is remix originally by RoboCop0815 ( https://www.thingiverse.com/thing:4441407 ) Improved trigger via handle. For left handed or right handed - your choice :-) Use PETG if you want it stronger. How it works: Standard print settings:…
This is a full remix of the excellent Dyson tool wall mount bracket by richieclarkie ( https://www.thingiverse.com/thing:4097193 ). I needed a stronger version because the brackets with screw holes had a 90-degree angle which was a weak…
📄 Description 65 cm Bladeless Fan (Dyson-Style) A functional and stylish bladeless fan inspired by Dyson’s design. The full structure stands 65 cm tall and uses a standard 120 mm computer fan. It's powered via a DC jack cable inside a…
This adapter is designed to hold all the accessories that came with the Dyson V11 vacuum in a small space envelope. A smaller version is also available. Accessories do not obstruct each other and can be accessed freely and easily.…
Source / Attribution: These are remixed from https://www.thingiverse.com/thing:2860289 . I wanted to clean up the F3D file so I could follow it and create some additional mounts. Having done that, it makes sense to release my updates back…
Wall Mounted Holder for Dyson Supersonic Hair Dryer. Need to prepare some magnets, please refer to the following URL link for specifications.…
A holder to store more than the default two accessories. You have to drill a 4mm hole to the base to mount the holder using a M4 screw and nut. The right arm can be mirrored to have an additional slot. Support my work For non-Prusa parts…
I needed some additional Nozzles for my old Dyson. I don't know the Model designation. The following are included: Flat Nozzle: Works way better than the original when vacuuming up drilling dust. Thin Nozzle: I use this for the inside of…
I do not own this character. BlushCrunch Studio are the creators of Dandy's shop, respecting the rights of the creators. There might be a painted model of the items someday for the thumbnail. I procrastinate a lot, sorry about that. Also,…
Hose adapters for the Dyson V6 series. Options are: 1"(25.4mm) to 2"(50.8mm) Nozzle attachments of various sizes and shapes. Wall thickness of 2mm Straight, 30deg, 45deg The V7+ Dyson's have a more complicated connector on the nozzle…
Upload of almost every Toon just incase the maker world controversy is true and to make the Dandys world models more accessible
Since the included wall mount of the Dyson V12 Slim only has room for two accessories, I built myself additional wall mounts. I mounted the wall mounts with tesa Powerstrips. But they can also be screwed. The larger hole is to get with…
I've printed it with PLA, 0.2mm layer height, quality profile, with Brim. No supports needed.
Like, print and share! Dyson accessory holder for wall mounting. Compatible with Dyson V7-V11. V15 (verified by user) reversible, works with front release mechanism or facing the wall. works with simple and motorized accessories different…
Shelf/holder for Dyson Airwrap. Can be used as a stand or hung on wall.
My wife needed a way to securely hold her Airwrap attachments and wasn't finding anything she liked here or for purchase so I designed and printed these. I hope they work for everyone. I printed the shelf with the hooks on it's back with…
This is a simple wall mount for our Dyson Airwrap and one additional fan outlet. Due to request I've added a double-version for 2 fan outlets. Havent tested the big one myself, should fit any standard (Ender)-sized printer with a 220mm…
I make this model in three parts. I plan on using a broom handle for the handle of the prop, so I used the diameter of one I had on hand. There is a tab on the head and neck of the model that will help with aligning it right. I hope to…
90° Nozzle for Intex Pools
created a print-in-place trigger locker for my dyson because its very annoying to push the trigger the whole time. Tested it with the v8 and v15 but should work with others too. Tried PLA and PETG. Both worked fine. No Support needed.
Docking station for Dyson V11 and V15. Compatible with genuine charger connector, press fitted but might require glue as i have tested only one charger. Requires supports!
Dyson V11/V10/V8/V7 Accessory Mount/Holder Additional double holder for Dyson accessories as wall mounting. This mount has only been tested with the V10, but it should also work with the V7, V8 and V11. This is a remix (original is from…
This is an adapter to use mini vacuum accessories with a Dyson Vacuum. It snaps in nicely, just as any other Dyson accessory. I also made a mini crevice tool posted separately. https://www.prusaprinters.org/prints/150050-mini-crevice-tool
My button broke, so i printed this replacement. Fits perfectly. Printed in Prusament PETG on PrusaMini+ w/ support
a small nozzle for Dyson V7, V8, V10, V11, V15
Dyspenser zaklejek do przestrzelin tarcz strzeleckich. Pasuje do zaklejek 20mm z tego linku – https://tarczestrzeleckie.com/zaklejki Ewentualnie podobnych zaklejek sprzedawanych w rolkach: szerokość taśmy max. 25mm średnica zewnętrzna…
This is a design of a VESA adopter designed to fit Samsung Odyssey G9 screens. Adapter is reinforced with M8 Bolts. Hardware list: 2 x M8 x 70 mm - to reinforce 3D printed part with clamp force and take up the bulk of sheer force 4 x M4 x…
This is a remix based on BuildX's perfect fitting adapter: https://www.prusaprinters.org/prints/145130-dyson-v10-adapter/files Total height is about 18 cm, can be printed vertically with support for the latch. F3D file attached :)
Original design inspired by https://www.thingiverse.com/thing:1930493, this thing is a rebuild in F360 from scratch, since the original did not fit my Dyson v12 Slim accessories. I also attached the .f3d file so you may remix for other…
This is a 3D model of a diffuser attachment designed for the Dyson Airwrap. Ideal for those looking to experiment with new accessories for their Airwrap, this model helps distribute air more evenly to enhance curling and drying…
Verlängern Sie die Lebensdauer Ihres Dyson Filters mit Leichtigkeit! Unser speziell entworfenes Teil passt perfekt zu Ihrem Dyson und ermöglicht es Ihnen, den Filter mit Leichtigkeit und Effizienz zu reinigen. Einfach den Filter…
Just needs some glue to assemble, pins are included for alignment. Filament shown: Hello3D – Matte Blue PLA 3D Printing Canada Value PLA – Red, Orange, Black AMZ3D PLA – Dark Violet Print Settings Layer height: 0.12mm Infill: 15%
Is the wand on your Dyson vacuum all loose and jiggly? Well, this is just the fix. Designed to fit into the wand end and take up some of the slack. Over time my Dyson vacuum has worn out and become quite loose. I designed this spacer to…
These holders are designed to work with Dyson detect vacuum accessories and medium sized command strips. These will allow you to organize and hang all the Dyson accessories anywhere without screws.
I hate carrying Dyson accessories while vacuuming - that's why I have designed this mount. I made two belt compatible mounts and also two more for attaching accessories directly on the vacuum cleaner's tube. Update #20230920: I have…
Very simple vacuum cleaner trigger lock. No additional materials needed. Holds very well due to the tight fit between the finger rest and the sloping bottom of the container. I expect minimal wear due to the default position without load.…
A small crevice tool for Dyson vacuums, V7 and later. This tool is even narrower than the stock one for reaching even smaller crevices. The design has a fully functional locking mechanism like the original, using a compliant mechanism to…
My own creation from inspiration of several models out there. I wanted something that would lock the trigger to an ‘on’ position yet allowed my finger to still use the trigger without significantly hindering its original operation. Also…
The model has holes on the bottom for m3x15 countersunk screws to attach the bottom plate, and 4mm countersunk holes to attach to a wall. The bottom piece can be printed on either side, top piece only from the flat face up. Supports are…
Despite a very expensive cleaner, the Dyson company doesn't supply another bracket for the multiple attachments. I just had to design my own. These are two wall brackets for the Dyson v11 One for holding two attachments. One for holding…
Print with 0.15 mm layer height in PLA or PETG. 15% Infill. A small amount of post processing might be necessary to get smooth attachment and detachment. See drawing for dimensions. Revision Notes: R06 - original release. (Photos) R07 -…
Like Rilot's design, this model attaches to the lip below the trigger but leaves much more space for normal trigger operation. The lock can be flipped using a single finger allowing for one-handed operation and you can easily switch…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** After a few years of great service, the latch on my…
The original button breaks if pressed with force, in this reinforced version I added a thickness to increase the resistance to pressing the button. February 20, 2025 - New retopologized and more strengthened version at the following link:…
Handyständer für den Schreibtisch
Dewalt Battery to Dyson V6 - adaptor Version 2 -- https://www.printables.com/model/1897716-dewalt-battery-to-dyson-v6-adaptor-_-version-2 No soldering needed Requirements SP0702 switch…
The parent model is great, but it did not quite fit certain tools that require a larger spacing from the wall. In this remix I remodeled in Fusion360 and added 10 mm depth from the wall to accommodate those pesky tools that wouldn't fit…
This Dyson vacuum adapter simply enables a flat end because the dyson end has this clippy end ;-) Print with PLA in 0.2mm with 3 outer layers. no supports needed. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…
A simple Wallmount for the Dyson Hairdryer
Dyson Supersonic Hair Dryer Stand With Attachment Storage 2x Din 988 45x55x0.5 (neds to be glued in place) 2x Ruthex M4 short 1x Ruthex M4 2x M4 x 12mm (countersunk screw) 1x M4 x 8mm (countersunk screw) 0.4mm nozzle - 0.2mm layer height…
Accessory holder for Dyson extension wand. Compatible with V8 V10 V11 Print instructions Category: Household
I searched for a handy solution to wall-mount two Dyson accessories close to the charging station and I found fefo5385 and skyhawkcosplay 's great designs, but for what I had in mind those were not fully satisfying. So I designed from…
I really liked haitonno's design for this drill dust collector, but for some reason, it was "upside down" from what my Dyson would need. So, I flipped the button/lid around. Much better. I printed in 0.3 resolution, and the button broke…
Here's a very simple and sturdy bracket for storing your Dyson Supersonic hair dryer on a wall. I mounted this in our walk-in closet and it's worked well over the last couple of years. This design is a bit different from the others in…
Holds your Dyson Airstrait securely on the wall. Easy print, no support needed.
Dyson Mini Turbo 967479-01 96747901 belt housing part T112750 supports needed This part was broken when the mini turbo brush of my Dyson V9 started to rattle I printed it in PLA and after a year it is still going strong Category:…
This is a slime wand for the Dyson V8 vacuum. The original is great, but it is too thick for vacuuming between my car seats. I am sure you can find other uses too! Print instructions Category: Household Summary This is a slime wand for…
The bladeless fan doesn't have blades, but uses a duct structure to deflect the airflow, resulting in a wider jet and a more natural feel. The wind intensity depends primarily on the motor. I used a 9cm computer fan, one of the most…
Template This is the base connector section as a print in place version for all newer Dyson vacuum cleaners (for example Dyson V7, V8, etc). Reengineered from the original and tested over several Versions. This is for all of you who do…
Modifying my computer for use as a server required installing more hard drives. The original case frame had space for only two drives. Thanks to these frames, multiple drives can be mounted. The assembly set includes one base and two…
I had a dead Dyson battery in my V8 Absolute stick vacuum for a second time. Rather than buy a replacement battery (o a replacement vacuum), I created these printer parts so the Dyson could use Ryobo one+ 18V batteries. The result? It…
![#0118 [REPAIR] Dyson Wand Tube Latch <V7 V8 V10 V11 V15>](https://media.printables.com/media/prints/684679/images/5379109_2c2c8704-f14a-47c0-a640-2faee9f8204a_5ae8e719-2a4b-4ff5-a084-a3e50fdbeffe/rl-20231217-006.jpg)
