224 modeli
Please click if you appreciate my work :) Balance, aggression, and classic M spirit. This 3D printable wall-mounted model of the BMW M3 E46 Coupe captures the iconic lines of one of the most beloved generations of the M3. With its wide…
Wydruk około 12,06 €–14,74 € nettoWstępna wycena jednego wariantu
Please click if you appreciate my work :) The iconic front of the BMW M3 E46 – now reimagined as a sleek and functional phone stand! This model was designed specifically for 3D printing, capturing the signature lines of this automotive…
Wydruk około 14,36 €–17,56 € nettoWstępna wycena jednego wariantu
BMW E46 Center console bin with retractable charger. Extra things you need: Sandpaper/paint if you want to make it need. Retractable unit from a retractable 12v car charger from Aliexpress.…
Wydruk około 35,40 €–43,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a quick and simple accessory for installing an x-brace for a cleaner look if you leave the rear interior in. Slide these over the bottom of the x brace before the final bolt-up after laying the carpet back in. This specifically…
Wydruk około 3,30 €–4,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
BMW Schlüsselanhänger mit E30, E36, E46, E90, E34, E91
Taking inspiration from pictures of commercially available phone mounts for the e46, I created this clip in order to rigidly attach my magsafe charger without clipping it to the vents. The clip mounts on the stud next to the radio,…
For the best results use a fine nozzle with a color change at 2mm. Use TPU if you don't want to scratch your interior.
BMW E46 Coupe. Easy to print . Of course you can scale it the size you want. Easy to print for up to 100cm length, just cut it in some parts with the new slicer. I recomend a strength of about 2-3mm. Add some double-sided tape and stick…
Original OEM number 31311139453. Thank you for likes and downloads!!!!
Cut off the remains of the rubber part on your windshield cowl and attach these printed ones. OEM PART: 51718208483 Mirror the end part to use it on the other side. Print multiple mid parts to cover the entire length. Printed from…
If you enjoy my content by me a coffee. Thank you for support beforehand :) https://buymeacoffee.com/MRinlandcost Commercial License If you would like to print and sell my work in link below you can find my Patreon account. IF you have…
This is a remixed version of the original thing posted here on Thingiverse, which is a shift boot bracket for the BMW E46 3 Series. It has better strength as with the added fillets and the clips are thickened as well as enlarged for…
Ashtray slider BMW E46 for bmw
Alternative solution for BMW E46 Double Din AC Relocation Bezel. After a Double Din radio replacement you have to move the AC unit on the lower frame but the unit doesn't fit that well. This is a simple solution that uses your original…
classic car from nfs mw if you like it dont forget share your make and click like, i'll be glad if you take a look at my others projects
I wanted the “stock look” and the mounting schemes provided by the manufacturer of the aftermarket speaker did not fit the tri-lobe stock mounting scheme and I did not want to drill permanent holes in my door. This was designed for the…
DONATE: https://paypal.me/JuanCMedina21?locale.x=en\_US Use customs support (see picture for support placement) Recommend to print with 0.24 Layer height and lower speed for overhangs to avoid using supports. Printed with TPU 1999-2001…
Create a simple key ring for your car or make a gift for a friend Write a comment about which car you would like as a keychain Original model: https://www.thingiverse.com/thing:4720259
The model is scaled very large, you will need to scale it down in your slicer. You should also use the “select face to align to build plate tool” to make the model sit properly on the build plate. The model consists of multiple parts that…
We did 6 different version to get it in the angle that it faces the driver. We had a tight fit so it did not need any mounting to the dash, but maybe some glue or other adhesive wouldn't hurt. Printed flat down on the surface, with ABS+…
cluster frames for bmw e46
Relive the excitement of tuner culture with this 3D printable STL model of the BMW M3 E46 (Most Wanted Edition). This iconic tuner car model is perfect for car enthusiasts and Need for Speed fans looking to display a legendary street…
Cupholders for e46 with space for usb charger. Small holes on sides are for ambient lights smd led can be inserted. Perfectly fits Koch 500ml bottle. Version 1.0. If u use it please tag me at IG: tomas_lukacs thanks. NOT FOR COMERCIAL USE.
Print a cheap replacement for OEM E46 sun visor clips. I recommend printing at 100% infill to prevent splitting at layers when installed. I had good success with a 98A TPU filament at 100% infill with supports on. Just give extra support…
Hello there! I was looking for a plug and play speaker replacement for my BMW E46 Compact (CAUTION! This model has bigger front door speakers than all other E46 - this adapter is only fitting for Compact!) and wanted better sound quality…
BMW E46 M3 for your keychain. I like to print it in TPU.
BMW E46 Sunglasess box delete
Mine got lost, so I decided to make one! Print in PETG or other heat resistant filament. BMW (E46 3 Series (not M3), E83 X3) Battery Positive Terminal Base B + - Cover Cap (61138385158) Category: Automotive
The BMW E46 , produced from 1998 to 2006 , is widely regarded as one of the most iconic models in the BMW 3 Series lineup. Admired for its perfect blend of performance, luxury, and precision engineering, the E46 became a favorite among…
A classic BMW M3 model, well known to Need for Speed fans. I really enjoyed modeling it, and I hope you like it too. Note: I recommend keeping the print settings at standard.
Model with true aspect ratios. Ideal for hanging on the wall, all in one piece.
These speaker adapters were designed during my E46 convertible sound upgrade. My E46 is a Euro spec convertible without Hi-Fi nor HK options. This means: Sound amplification is done directly by the build-in radio (CD53 manufactured by…
Speaker cover for your e46 compact The .3mf version has the m logo included I recommend printing in PETG or ABS/ASA for better temperature resistance I printed it in Prusament Galaxy Glack PETG Enjoy
Very simple cup holder for BMW 3 E46 For 70mm bottles Layer height: 0.20mm Infill: 20-25% Material: PLA, PLA HS, PETG
A common issue on the BMW E46 is the cracking of old clips that secure the exterior rain drip rail/molding as with heat and age they become brittle. Unfortunately, BMW does not sell these clips on their own and you would have to purchase…
Modifier (bmw e46 grid): Top and Bottom layers: 0 Perimetrs: 1 Infil: 58% Infill pattern: Grid Colors: 0-2.2 - Black 2.2 - 2.4 - Orange(optional) / black 2.4 - 3.0 - Color of your choice (color of car) 3.0 - White
Do NOT print it in PLA, it will deform/melt. Printed with supports.
Print these to fix the broken boot handle on your BMW. Theyre designed so they squeeze in the holes, creating some tension to be able to screw the handle to the car. The “center” ones are for the 2 center bolts, the “side” ones for the…
Print with more wall layers or higher infill to allow to better screw in.
E46 & E36 brake line holder. The brake line snaps in place, and the plug holds the lid snugly to the body. I printed it in PETG-CF & 0.16mm
Print settings: Step: 0.2 Shell: 2 Infill: 100% Supports: Yes Filament: ASA (Black)
Detailed wallart of the famous BMW E46 Compact 325ti, Easy to print . Of course you can scale it the size you want. Easy to print for up to 80cm length, just cut it in some parts with the slicer. I recomend a strength of about 2-4mm. Add…
It's a USB holder for BMW e46. Original BMW part : 307090900 Materials : PLA / ABS Nozzle : 200°C Bed : 60°C
Isofix cover for BMW E46 I was missing one of the isofix covers so I modeled and printed this one. It's not a perfect copy since I added a bit of thickness in some parts to make it stronger. You can see in one of the images the…
Made this few years back. Still intact till today. Drop a comment for feedbacks Printed in ASA 100% fill. ABS or others Enable "Detect Thin Wall"
Gaugepod for 52mm gauges. I have only printed a testpiece of it, as i changed my setup to remove my single gauge when going to a stand alone, but my phone mount (pictured in my car) is made from the same model, so the overall fit in the…
Original cover was warped, so i made a new one. v3 - fixed incorrect location of the hole for screw. v2 - after printing, noticed small reinforcements are no necessery and make cover warp. after removing them everything looks ok.
This custom-designed replacement for the BMW E46 ashtray and storage insert solves the issue of the always-on 12V outlet. Normally the cigarette lighter/12V outlet remains powered even when the ignition is off. This insert includes a…
Since my cap was broken i remodelled the original part. There are two versions as the original part has a lash to secure the cap. I printed the version without the lash in TPU without support. Print settings: Material: TPU (recommended)…
2.5" Drive HDD / SSD Laptop Drive Caddy Disk Tray Bracket for Lenovo ThinkPad. Compatible Models: For Thinkpad T470 T480 T570, For Thinkpad P50 P51 P51S, For Thinkpad P70 P71 P72, For Thinkpad E460(NOT E470)， For Thinkpad E480 E485 R480,…
The handle's bottom part tends to snap easily, which can be a real pain. Without a reliable handle, you're basically asking for your curtain to get torn apart. I tried fixing the old one with glue, but it just didn't cut it for long. This…
Für den Druck habe ich PETG Prusament verwendent. Nun schon einige Monate im Fahrzeug verbaut und hält ohne Probleme. Ich habe es auf meinem Prusa XL Multi Tool gedruckt mit standard Einstellungen. Die zwei Nasen habe ich nach dem Druck…
BMW M3 E46, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better detail.…
Wall Art featuring the BMW M3 E46 from the front. I modeled it using Inkscape. Hope you like it!
Print standing vertically, Coat with a clear Just glue on your trim and push it on Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: .28 Infill: 10% Filament: eSun PLA+…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
Spare part for the window regulator of the BMW E46. It may also fit other BMW models. Ersatzteil für die Fensterheber eines BMW E46, vielleicht passt es auch an anderen BMW Reihen, jedoch habe ich dies nicht überprüft.
My first try with the iPad. The e46touring.stl is scaled to 120% in x and y. Didn't try that version, share please if you printed one ! :) Hope you enjoy! Print instructions check the gcode
Replace snapped BMW 318i e46 ABS hex nuts with a 3D printed one. Use proper automotive filament.
BMW M3 E46 CSL Wall Art Silhouette model. Adjustable size. I accept model suggestions.
Hi, I give you a simple magnetic phone mount that I designed to use with my BMW E46. It works with cylindrical neodymium magnets, 8mm diameter and 2.7mm thick (14pcs total). Instructions: -print e46magholdbase part in some temp resistant…
bmw e46 siluette with hooks for keys
Print in 100% infill. i recommend gluing in place.
Remix of Samuel Moor's phone mount for BMW E46. The Pivot Ball is now removable, fastened with a 33mm M3 bolt into a heat set insert.
This is WIP I'm still playing with the rivet (as I have split rivet and bracket to make it slightly easier to print. Description This is a redesign of the original BMW holder for the warning triangle that goes in the left hand side of the…
Fits bmw e46 inner doorstep panel, only fits longitudinally brackets. possible fit for other bmw models as E53 e39 e38.
New covers for your e46 Different versions: Plane M-Logo
model BMW e46 Touring facelift keychain
My dog rides shotgun and would always step on the hazard button when getting in and out, or when I left him in the car. I made this button cover to prevent paws from being able to activate the buttons, but still allow a finger to hit them…
So I broke my wiper clip while replacing some other stuff on the car. There's not really a viable/economical replacement and original part does not take well to super glue. I started from another STL and modeled over it in fusion. Then…
Re-upload of Thingiverse model: https://www.thingiverse.com/thing:5420255/files Original author: nelson334
The BMW M3 E46 Coupé is the second release in my collection of printable cars with functional moving wheels, following the Nissan Skyline GT-R R34 V-Spec II. This model represents the standard road-going M3 Coupé . It has been designed…
I designed these adapters for a Friend who drives and builds an E36 M3 as a rally car. The final part was CNC milled in 7075 Aluminium but the PA-CF 3D Print worked fine for a first test
Designed E46 front door speaker adapter brackets for Kicker 5 1/4". Used in my E46 325Ci (coupe) BMW OEM speaker size is 6 1/2", Kickers are 5 1/4". Advised to use foam adhesive tape to seal the edges, and reduce any vibrations that could…
Got tired of the Velcro pads failing constantly, forcing me to adjust the floor mats every damn time I got in the car. This is my solution. Printing: Small part, so go 100% infill @ .2 or smaller Button face down Organic supports on…
Simple clutch stop for every E46 model. You just need an M10 hexagonal bolt, an M10 nut (use it as a locknut) and a washer. Behind the clutch pedal there is a small plastic cap, with a philips insert. Just unscrew it and you will find an…
This gauge pod fits in the ashtray of the E46. I used prosport boost and AFR gauges. You need to cut the rear of the ashtray carefully, and take special care not to cut the gears or spring operating the lid. I printed this i ABS.
Hello my E46 lovers, people who grew up playing NFS, and also owns a 3d printer, I present you my 2d wall art of BMW E46. The design is updated from my previous models and has fewer but larger prints giving it a cleaner look. If you like…
Cover for electronics of a BMW e46 instrumer cluster conversion for sim racing The great project to convert a dash to sim racing from: https://neuros-projekte.de/simulator/bmw-e46-arduino-simhub/ There are mounts on the back for a desk…
Bonjour, Voici la cloche de 86 mm à 16 pans pour le démontage du filtre a huile sur BMW e46 équipée avec moteur N42B18A. Prévue pour clé dynamométrique avec carré de 12,5mm. Pièce conçue pour être solide Tolérance à 0,1mm Pas de support 5…
I printed it out of PLA and it was a good print. I recomend you go slow on the first few layers and it should stick to the bed. Enjoy!!!
Bmw E30, E34, E39, E46 - battery spacer. OEM-number: 61 21 1 350 825 Reproduced with the dimensions of original part. You can find the best way to place this model on the printing table at the picture attached. Fusion360 source-files…
A blank for E46 center airvents, can be used as a base for a gauge pod, switchpanel, phonemount etc, or simply a blanking plate. I made it as a mount to use a phone as a digital gauge for my driftcar, Added the file with holder for One+ 8…
Oil holder for trunk Bmw e46 Pla 0.2
I attached also the pictures to see how it fits
This adapter was used to mount a 25mm twweter of u-Dimension EL Comp 6 system into BMW E46 coupe. You need to print an aditional RH version of LH model provided below.
Filament: ASA Supports: Yes (As Applicable) Infill: Minimum 15% Brim: Yes (As Applicable)
Kolay kolay girmesi gerekiyor, girmez ise önce üst kısmı oturtup alt kısmı geçirin.
A E46 logo with a specific scale like the other badges on the car. Can be modified and scaled as wished. Printed with high fill if small and lower fill than bigger. Edges on top slightly rounded. 2mm thickness
Ein Werkzeug zum prüfen des Ventils im Kühlwasserdeckel vom BMW e46. Einfach ein Reifenventil einsetzen, fertig! Unterextrusion kann zu Undichtigkeit führen :p Mit Gewinde nach unten drucken. Die Dichtung ist optional. A Tool for testing…
Hallo there! So i Printer that cap with PETG from eSun with a BambLab P1S. The other Parameters you can take from the screenshots. I used supports to have it perfectly done! The Surface Looks so rough cause of the Texturen print malte on…
I needed a place to mount my Peltor intercom for track days. So I tried to create a replacement for the back ashtray in
BMW M3 GTR E46 as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
Tip to save material: rotate the model 180 degrees. Nozzle 0,4mm
This a third brake light housing for an e46. The one on my car just snapped so I tried making a 3d printed one. My car is a coupe so I dont know if it differs to a sedan or postfacelif cars. Design is quite crude but it does what I wanted…
